1 /*
2 * CDDL HEADER START
3 *
4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
7 *
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
12 *
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
18 *
19 * CDDL HEADER END
20 */
21 /*
22 * Copyright 2009 Sun Microsystems, Inc. All rights reserved.
23 * Use is subject to license terms.
24 */
25
26 /* Command-line audio record utility */
27
28 #include <stdio.h>
29 #include <libgen.h>
30 #include <errno.h>
31 #include <ctype.h>
32 #include <math.h>
33 #include <stdlib.h>
34 #include <unistd.h>
35 #include <string.h>
36 #include <strings.h>
37 #include <locale.h>
38 #include <fcntl.h>
39 #include <signal.h>
40 #include <limits.h> /* All occurances of INT_MAX used to be ~0 (by MCA) */
41 #include <sys/types.h>
42 #include <sys/file.h>
43 #include <sys/stat.h>
44 #include <sys/param.h>
45 #include <stropts.h>
46 #include <poll.h>
47 #include <sys/ioctl.h>
48 #include <netinet/in.h>
49
50 #include <libaudio.h>
51 #include <audio_device.h>
52
53 #define irint(d) ((int)d)
54
55 /* localization stuff */
56 #define MGET(s) (char *)gettext(s)
57
58 #if !defined(TEXT_DOMAIN) /* Should be defined by cc -D */
59 #define TEXT_DOMAIN "SYS_TEST" /* Use this only if it weren't */
60 #endif
61
62 #define Error (void) fprintf
63
64 /* Local variables */
65 static char *prog;
66 static char prog_opts[] = "aft:v:d:i:e:s:c:T:?"; /* getopt() flags */
67 static char *Stdout;
68
69 /* XXX - the input buffer size should depend on sample_rate */
70 #define AUDIO_BUFSIZ (1024 * 64)
71 static unsigned char buf[AUDIO_BUFSIZ];
72 static char swapBuf[AUDIO_BUFSIZ]; /* for byte swapping */
73
74
75 #define MAX_GAIN (100) /* maximum gain */
76
77 static char *Info = NULL; /* pointer to info data */
78 static unsigned Ilen = 0; /* length of info data */
79 static unsigned Volume = INT_MAX; /* record volume */
80 static double Savevol; /* saved volume */
81 static unsigned Sample_rate = 0;
82 static unsigned Channels = 0;
83 static unsigned Precision = 0; /* based on encoding */
84 static unsigned Encoding = 0;
85
86 static int NetEndian = TRUE; /* endian nature of the machines */
87
88 static int Append = FALSE; /* append to output file */
89 static int Force = FALSE; /* ignore rate differences on append */
90 static double Time = -1.; /* recording time */
91 static unsigned Limit = AUDIO_UNKNOWN_SIZE; /* recording limit */
92 static char *Audio_dev = "/dev/audio";
93
94 static int Audio_fd = -1;
95 /* file descriptor for audio device */
96 static Audio_hdr Dev_hdr; /* audio header for device */
97 static Audio_hdr Save_hdr; /* saved audio device header */
98 static char *Ofile; /* current filename */
99 static int File_type = FILE_AU; /* audio file type */
100 static int File_type_set = FALSE; /* file type specified as arg */
101 static Audio_hdr File_hdr; /* audio header for file */
102 static int Cleanup = FALSE; /* SIGINT sets this flag */
103 static unsigned Size = 0; /* Size of output file */
104 static unsigned Oldsize = 0;
105 /* Size of input file, if append */
106
107 /* Global variables */
108 extern int getopt();
109 extern int optind;
110 extern char *optarg;
111
112 /* Local Functions */
113 static void usage(void);
114 static void sigint(int sig);
115 static int parse_unsigned(char *str, unsigned *dst, char *flag);
116 static int parse_sample_rate(char *s, unsigned *rate);
117
118
119 static void
usage(void)120 usage(void)
121 {
122 Error(stderr, MGET("Record an audio file -- usage:\n"
123 "\t%s [-af] [-v vol]\n"
124 "\t%.*s [-c channels] [-s rate] [-e encoding]\n"
125 "\t%.*s [-t time] [-i info] [-d dev] [-T au|wav|aif[f]] [file]\n"
126 "where:\n"
127 "\t-a\tAppend to output file\n"
128 "\t-f\tIgnore sample rate differences on append\n"
129 "\t-v\tSet record volume (0 - %d)\n"
130 "\t-c\tSpecify number of channels to record\n"
131 "\t-s\tSpecify rate in samples per second\n"
132 "\t-e\tSpecify encoding (ulaw | alaw | [u]linear | linear8 )\n"
133 "\t-t\tSpecify record time (hh:mm:ss.dd)\n"
134 "\t-i\tSpecify a file header information string\n"
135 "\t-d\tSpecify audio device (default: /dev/audio)\n"
136 "\t-T\tSpecify the audio file type (default: au)\n"
137 "\tfile\tRecord to named file\n"
138 "\t\tIf no file specified, write to stdout\n"
139 "\t\tDefault audio encoding is ulaw, 8khz, mono\n"
140 "\t\tIf -t is not specified, record until ^C\n"),
141 prog,
142 strlen(prog), " ",
143 strlen(prog), " ",
144 MAX_GAIN);
145 exit(1);
146 }
147
148 static void
sigint(int sig)149 sigint(int sig)
150 {
151 /* If this is the first ^C, set a flag for the main loop */
152 if (!Cleanup && (Audio_fd >= 0)) {
153 /* flush input queues before exiting */
154 Cleanup = TRUE;
155 if (audio_pause_record(Audio_fd) == AUDIO_SUCCESS)
156 return;
157 Error(stderr, MGET("%s: could not flush input buffer\n"), prog);
158 }
159
160 /* If double ^C, really quit */
161 if (Audio_fd >= 0) {
162 if (Volume != INT_MAX)
163 (void) audio_set_record_gain(Audio_fd, &Savevol);
164 if (audio_cmp_hdr(&Save_hdr, &Dev_hdr) != 0) {
165 (void) audio_set_record_config(Audio_fd, &Save_hdr);
166 }
167 }
168 exit(1);
169 }
170
171 /*
172 * Record from the audio device to a file.
173 */
174 int
main(int argc,char ** argv)175 main(int argc, char **argv)
176 {
177 int i;
178 int cnt;
179 int err;
180 int file_type;
181 int ofd;
182 int swapBytes = FALSE;
183 double vol;
184 struct stat st;
185 struct pollfd pfd;
186 char *cp;
187
188 (void) setlocale(LC_ALL, "");
189 (void) textdomain(TEXT_DOMAIN);
190
191 /* Get the program name */
192 prog = strrchr(argv[0], '/');
193 if (prog == NULL)
194 prog = argv[0];
195 else
196 prog++;
197 Stdout = MGET("(stdout)");
198
199 /* first check AUDIODEV environment for audio device name */
200 if (cp = getenv("AUDIODEV")) {
201 Audio_dev = cp;
202 }
203
204 /* Set the endian nature of the machine */
205 if ((ulong_t)1 != htonl((ulong_t)1)) {
206 NetEndian = FALSE;
207 }
208
209 err = 0;
210 while ((i = getopt(argc, argv, prog_opts)) != EOF) {
211 switch (i) {
212 case 'v':
213 if (parse_unsigned(optarg, &Volume, "-v")) {
214 err++;
215 } else if (Volume > MAX_GAIN) {
216 Error(stderr, MGET("%s: invalid value for "
217 "-v\n"), prog);
218 err++;
219 }
220 break;
221 case 't':
222 Time = audio_str_to_secs(optarg);
223 if ((Time == HUGE_VAL) || (Time < 0.)) {
224 Error(stderr, MGET("%s: invalid value for "
225 "-t\n"), prog);
226 err++;
227 }
228 break;
229 case 'd':
230 Audio_dev = optarg;
231 break;
232 case 'f':
233 Force = TRUE;
234 break;
235 case 'a':
236 Append = TRUE;
237 break;
238 case 'i':
239 Info = optarg; /* set information string */
240 Ilen = strlen(Info);
241 break;
242 case 's':
243 if (parse_sample_rate(optarg, &Sample_rate)) {
244 err++;
245 }
246 break;
247 case 'c':
248 if (strncmp(optarg, "mono", strlen(optarg)) == 0) {
249 Channels = 1;
250 } else if (strncmp(optarg, "stereo",
251 strlen(optarg)) == 0) {
252 Channels = 2;
253 } else if (parse_unsigned(optarg, &Channels, "-c")) {
254 err++;
255 } else if ((Channels != 1) && (Channels != 2)) {
256 Error(stderr, "%s: invalid value for -c\n",
257 prog);
258 err++;
259 }
260 break;
261 case 'e':
262 if (strncmp(optarg, "ulinear", strlen(optarg)) == 0) {
263 Encoding = AUDIO_ENCODING_LINEAR8;
264 Precision = 8;
265 } else if (strncmp(optarg, "linear8",
266 strlen("linear8")) == 0) {
267 Encoding = AUDIO_ENCODING_LINEAR;
268 Precision = 8;
269 } else if (strncmp(optarg, "ulaw",
270 strlen(optarg)) == 0) {
271 Encoding = AUDIO_ENCODING_ULAW;
272 Precision = 8;
273 } else if (strncmp(optarg, "alaw",
274 strlen(optarg)) == 0) {
275 Encoding = AUDIO_ENCODING_ALAW;
276 Precision = 8;
277 } else if ((strncmp(optarg, "linear",
278 strlen(optarg)) == 0) || (strncmp(optarg, "pcm",
279 strlen(optarg)) == 0)) {
280 Encoding = AUDIO_ENCODING_LINEAR;
281 Precision = 16;
282 } else {
283 Error(stderr, MGET("%s: invalid value for "
284 "-e\n"), prog);
285 err++;
286 }
287 break;
288 case 'T':
289 if (strncmp(optarg, "au", strlen(optarg)) == 0) {
290 File_type = FILE_AU;
291 } else if (strncmp(optarg, "wav",
292 strlen(optarg)) == 0) {
293 File_type = FILE_WAV;
294 } else if (strncmp(optarg, "aif",
295 strlen(optarg)) == 0) {
296 File_type = FILE_AIFF;
297 } else if (strncmp(optarg, "aiff",
298 strlen(optarg)) == 0) {
299 File_type = FILE_AIFF;
300 } else {
301 Error(stderr, MGET("%s: invalid value for "
302 "-T\n"), prog);
303 err++;
304 }
305 File_type_set = TRUE;
306 break;
307 case '?':
308 usage();
309 /*NOTREACHED*/
310 }
311 }
312 if (Append && (Info != NULL)) {
313 Error(stderr, MGET("%s: cannot specify -a and -i\n"), prog);
314 err++;
315 }
316 if (err > 0)
317 exit(1);
318
319 argc -= optind; /* update arg pointers */
320 argv += optind;
321
322 /* Open the output file */
323 if (argc <= 0) {
324 Ofile = Stdout;
325 } else {
326 Ofile = *argv++;
327 argc--;
328
329 /* Interpret "-" filename to mean stdout */
330 if (strcmp(Ofile, "-") == 0)
331 Ofile = Stdout;
332
333 /* if -T not set then we use the file suffix */
334 if (File_type_set == FALSE) {
335 char *file_name;
336 char *start;
337
338 /* get the file name without the path */
339 file_name = basename(Ofile);
340
341 /* get the true suffix */
342 start = strrchr(file_name, '.');
343
344 /* if no '.' then there's no suffix */
345 if (start) {
346 /* is this a .au file? */
347 if (strcasecmp(start, ".au") == 0) {
348 File_type = FILE_AU;
349 } else if (strcasecmp(start, ".wav") == 0) {
350 File_type = FILE_WAV;
351 } else if (strcasecmp(start, ".aif") == 0) {
352 File_type = FILE_AIFF;
353 } else if (strcasecmp(start, ".aiff") == 0) {
354 File_type = FILE_AIFF;
355 } else {
356 /* the default is .au */
357 File_type = FILE_AU;
358 }
359 } else {
360 /* no suffix, so default to .au */
361 File_type = FILE_AU;
362 }
363 }
364 }
365
366 if (Ofile == Stdout) {
367 ofd = fileno(stdout);
368 Append = FALSE;
369 } else {
370 ofd = open(Ofile,
371 (O_RDWR | O_CREAT | (Append ? 0 : O_TRUNC)), 0666);
372 if (ofd < 0) {
373 Error(stderr, MGET("%s: cannot open "), prog);
374 perror(Ofile);
375 exit(1);
376 }
377 if (Append) {
378 /*
379 * Check to make sure we're appending to an audio file.
380 * It must be a regular file (if zero-length, simply
381 * write it from scratch). Also, its file header
382 * must match the input device configuration.
383 */
384 if ((fstat(ofd, &st) < 0) || (!S_ISREG(st.st_mode))) {
385 Error(stderr,
386 MGET("%s: %s is not a regular file\n"),
387 prog, Ofile);
388 exit(1);
389 }
390 if (st.st_size == 0) {
391 Append = FALSE;
392 goto openinput;
393 }
394
395 err = audio_read_filehdr(ofd, &File_hdr, &file_type,
396 (char *)NULL, 0);
397
398 if (err != AUDIO_SUCCESS) {
399 Error(stderr,
400 MGET("%s: %s is not a valid audio file\n"),
401 prog, Ofile);
402 exit(1);
403 }
404
405 /* we need to make sure file types match */
406 if (File_type_set == TRUE) {
407 /* specified by the command line, must match */
408 if (File_type != file_type) {
409 Error(stderr,
410 MGET("%s: file types must match\n"),
411 prog);
412 exit(1);
413 }
414 } else {
415 /* not specified, so force */
416 File_type = file_type;
417 }
418
419 /*
420 * Set the format state to the format
421 * in the file header.
422 */
423 Sample_rate = File_hdr.sample_rate;
424 Channels = File_hdr.channels;
425 Encoding = File_hdr.encoding;
426 Precision = File_hdr.bytes_per_unit * 8;
427
428 /* make sure we support the encoding method */
429 switch (Encoding) {
430 case AUDIO_ENCODING_LINEAR8:
431 case AUDIO_ENCODING_ULAW:
432 case AUDIO_ENCODING_ALAW:
433 case AUDIO_ENCODING_LINEAR:
434 break;
435 default: {
436 char msg[AUDIO_MAX_ENCODE_INFO];
437 (void) audio_enc_to_str(&File_hdr, msg);
438 Error(stderr,
439 MGET("%s: Append is not supported "
440 "for "), prog);
441 Error(stderr,
442 MGET("this file encoding:\n\t"
443 "[%s]\n"), msg);
444 exit(1);
445 }
446 }
447
448 /* Get the current size, if possible */
449 Oldsize = File_hdr.data_size;
450 if ((Oldsize == AUDIO_UNKNOWN_SIZE) &&
451 ((err = (int)lseek(ofd, 0L, SEEK_CUR)) >= 0)) {
452 if (err < 0) {
453 Error(stderr,
454 MGET("%s: %s is not a valid audio "
455 "file\n"), prog, Ofile);
456 exit(1);
457 }
458 Oldsize = st.st_size - err;
459 }
460 /* Seek to end to start append */
461 if ((int)lseek(ofd, st.st_size, SEEK_SET) < 0) {
462 Error(stderr,
463 MGET("%s: cannot find end of %s\n"),
464 prog, Ofile);
465 exit(1);
466 }
467 }
468 }
469 openinput:
470 /* Validate and open the audio device */
471 err = stat(Audio_dev, &st);
472 if (err < 0) {
473 Error(stderr, MGET("%s: cannot open "), prog);
474 perror(Audio_dev);
475 exit(1);
476 }
477 if (!S_ISCHR(st.st_mode)) {
478 Error(stderr, MGET("%s: %s is not an audio device\n"), prog,
479 Audio_dev);
480 exit(1);
481 }
482
483 /*
484 * For the mixer environment we need to open the audio device before
485 * the control device. If successful we pause right away to keep
486 * from queueing up a bunch of useless data.
487 */
488 Audio_fd = open(Audio_dev, O_RDONLY | O_NONBLOCK);
489 if (Audio_fd < 0) {
490 if (errno == EBUSY) {
491 Error(stderr, MGET("%s: %s is busy\n"),
492 prog, Audio_dev);
493 } else {
494 Error(stderr, MGET("%s: error opening "), prog);
495 perror(Audio_dev);
496 }
497 exit(1);
498 }
499 if (audio_pause_record(Audio_fd) != AUDIO_SUCCESS) {
500 Error(stderr, MGET("%s: not able to pause recording\n"), prog);
501 exit(1);
502 }
503
504 /* get the current settings */
505 if (audio_get_record_config(Audio_fd, &Save_hdr) != AUDIO_SUCCESS) {
506 (void) close(Audio_fd);
507 Error(stderr, MGET("%s: %s is not an audio device\n"),
508 prog, Audio_dev);
509 exit(1);
510 }
511 /* make a copy into the working data structure */
512 bcopy(&Save_hdr, &Dev_hdr, sizeof (Save_hdr));
513
514 /* flush any queued audio data */
515 if (audio_flush_record(Audio_fd) != AUDIO_SUCCESS) {
516 Error(stderr, MGET("%s: not able to flush recording\n"), prog);
517 exit(1);
518 }
519
520 if (Sample_rate != 0) {
521 Dev_hdr.sample_rate = Sample_rate;
522 }
523 if (Channels != 0) {
524 Dev_hdr.channels = Channels;
525 }
526 if (Precision != 0) {
527 Dev_hdr.bytes_per_unit = Precision / 8;
528 }
529 if (Encoding != 0) {
530 Dev_hdr.encoding = Encoding;
531 }
532
533 /*
534 * For .wav we always record 8-bit linear as unsigned. Thus we
535 * force unsigned linear to make life a lot easier on the user.
536 *
537 * For .aiff we set the default to 8-bit signed linear, not
538 * u-law, if Encoding isn't already set.
539 */
540 if (File_type == FILE_WAV &&
541 Dev_hdr.encoding == AUDIO_ENCODING_LINEAR &&
542 Dev_hdr.bytes_per_unit == 1) {
543 /* force to unsigned */
544 Dev_hdr.encoding = AUDIO_ENCODING_LINEAR8;
545 } else if (File_type == FILE_AIFF && Encoding == 0) {
546 Dev_hdr.encoding = AUDIO_ENCODING_LINEAR;
547 if (Precision == 0) {
548 Dev_hdr.bytes_per_unit = AUDIO_PRECISION_8 / 8;
549 }
550 }
551
552 if (audio_set_record_config(Audio_fd, &Dev_hdr) != AUDIO_SUCCESS) {
553 Error(stderr, MGET(
554 "%s: Audio format not supported by the audio device\n"),
555 prog);
556 exit(1);
557 }
558
559 if (audio_resume_record(Audio_fd) != AUDIO_SUCCESS) {
560 Error(stderr, MGET("%s: not able to resume recording\n"), prog);
561 exit(1);
562 }
563
564 /* If appending to an existing file, check the configuration */
565 if (Append) {
566 char msg[AUDIO_MAX_ENCODE_INFO];
567
568 switch (audio_cmp_hdr(&Dev_hdr, &File_hdr)) {
569 case 0: /* configuration matches */
570 break;
571 case 1: /* all but sample rate matches */
572 if (Force) {
573 Error(stderr, MGET("%s: WARNING: appending "
574 "%.3fkHz data to %s (%.3fkHz)\n"), prog,
575 ((double)Dev_hdr.sample_rate / 1000.),
576 Ofile,
577 ((double)File_hdr.sample_rate / 1000.));
578 break;
579 } /* if not -f, fall through */
580
581 default: /* encoding mismatch */
582 (void) audio_enc_to_str(&Dev_hdr, msg);
583 Error(stderr,
584 MGET("%s: device encoding [%s]\n"), prog, msg);
585 (void) audio_enc_to_str(&File_hdr, msg);
586 Error(stderr,
587 MGET("\tdoes not match file encoding [%s]\n"), msg);
588 exit(1);
589 }
590 } else if (!isatty(ofd)) {
591 if (audio_write_filehdr(ofd, &Dev_hdr, File_type, Info,
592 Ilen) != AUDIO_SUCCESS) {
593 Error(stderr,
594 MGET("%s: error writing header for %s\n"), prog,
595 Ofile);
596 exit(1);
597 }
598 }
599
600 /*
601 * 8-bit audio isn't a problem, however 16-bit audio is. If the file
602 * is an endian that is different from the machine then the bytes
603 * will need to be swapped.
604 *
605 * Note: The following if() could be simplified, but then it gets
606 * to be very hard to read. So it's left as is.
607 */
608 if (Dev_hdr.bytes_per_unit == 2 &&
609 ((!NetEndian && File_type == FILE_AIFF) ||
610 (!NetEndian && File_type == FILE_AU) ||
611 (NetEndian && File_type == FILE_WAV))) {
612 swapBytes = TRUE;
613 }
614
615 /* If -v flag, set the record volume now */
616 if (Volume != INT_MAX) {
617 vol = (double)Volume / (double)MAX_GAIN;
618 (void) audio_get_record_gain(Audio_fd, &Savevol);
619 err = audio_set_record_gain(Audio_fd, &vol);
620 if (err != AUDIO_SUCCESS) {
621 Error(stderr,
622 MGET("%s: could not set record volume for %s\n"),
623 prog, Audio_dev);
624 exit(1);
625 }
626 }
627
628 if (isatty(ofd)) {
629 Error(stderr, MGET("%s: No files and stdout is a tty\n"),
630 prog);
631 exit(1);
632 }
633
634 /* Set up SIGINT handler so that final buffers may be flushed */
635 (void) signal(SIGINT, sigint);
636
637 /*
638 * At this point, we're (finally) ready to copy the data.
639 * Init a poll() structure, to use when there's nothing to read.
640 */
641 if (Time > 0)
642 Limit = audio_secs_to_bytes(&Dev_hdr, Time);
643 pfd.fd = Audio_fd;
644 pfd.events = POLLIN;
645 while ((Limit == AUDIO_UNKNOWN_SIZE) || (Limit != 0)) {
646 /* Fill the buffer or read to the time limit */
647 cnt = read(Audio_fd, (char *)buf,
648 ((Limit != AUDIO_UNKNOWN_SIZE) && (Limit < sizeof (buf)) ?
649 (int)Limit : sizeof (buf)));
650
651 if (cnt == 0) /* normally, eof can't happen */
652 break;
653
654 /* If error, probably have to wait for input */
655 if (cnt < 0) {
656 if (Cleanup)
657 break; /* done if ^C seen */
658 switch (errno) {
659 case EAGAIN:
660 (void) poll(&pfd, 1L, -1);
661 break;
662 case EOVERFLOW: /* Possibly a Large File */
663 Error(stderr, MGET("%s: error reading"), prog);
664 perror("Large File");
665 exit(1);
666 default:
667 Error(stderr, MGET("%s: error reading"), prog);
668 perror(Audio_dev);
669 exit(1);
670 }
671 continue;
672 }
673
674 /* Swab the output if required. */
675 if (swapBytes) {
676 swab((char *)buf, swapBuf, cnt);
677 err = write(ofd, swapBuf, cnt);
678 } else {
679 err = write(ofd, (char *)buf, cnt);
680 }
681 if (err < 0) {
682 Error(stderr, MGET("%s: error writing "), prog);
683 perror(Ofile);
684 exit(1);
685 }
686 if (err != cnt) {
687 Error(stderr, MGET("%s: error writing "), prog);
688 perror(Ofile);
689 break;
690 }
691 Size += cnt;
692 if (Limit != AUDIO_UNKNOWN_SIZE)
693 Limit -= cnt;
694 }
695
696 /* Attempt to rewrite the data_size field of the file header */
697 if (!Append || (Oldsize != AUDIO_UNKNOWN_SIZE)) {
698 if (Append)
699 Size += Oldsize;
700 (void) audio_rewrite_filesize(ofd, File_type, Size,
701 Dev_hdr.channels, Dev_hdr.bytes_per_unit);
702 }
703
704 (void) close(ofd); /* close input file */
705
706
707 /* Check for error during record */
708 if (audio_get_record_error(Audio_fd, (unsigned *)&err) != AUDIO_SUCCESS)
709 Error(stderr, MGET("%s: error reading device status\n"), prog);
710 else if (err)
711 Error(stderr, MGET("%s: WARNING: Data overflow occurred\n"),
712 prog);
713
714 /* Reset record volume, encoding */
715 if (Volume != INT_MAX)
716 (void) audio_set_record_gain(Audio_fd, &Savevol);
717 if (audio_cmp_hdr(&Save_hdr, &Dev_hdr) != 0) {
718 (void) audio_set_record_config(Audio_fd, &Save_hdr);
719 }
720 (void) close(Audio_fd);
721 return (0);
722 }
723
724 /* Parse an unsigned integer */
725 static int
parse_unsigned(char * str,unsigned * dst,char * flag)726 parse_unsigned(char *str, unsigned *dst, char *flag)
727 {
728 char x;
729
730 if (sscanf(str, "%u%c", dst, &x) != 1) {
731 Error(stderr, MGET("%s: invalid value for %s\n"), prog, flag);
732 return (1);
733 }
734 return (0);
735 }
736
737 /*
738 * set the sample rate. assume anything is ok. check later on to make sure
739 * the sample rate is valid.
740 */
741 static int
parse_sample_rate(char * s,unsigned * rate)742 parse_sample_rate(char *s, unsigned *rate)
743 {
744 char *cp;
745 double drate;
746
747 /*
748 * check if it's "cd" or "dat" or "voice". these also set
749 * the precision and encoding, etc.
750 */
751 if (strcasecmp(s, "dat") == 0) {
752 drate = 48000.0;
753 } else if (strcasecmp(s, "cd") == 0) {
754 drate = 44100.0;
755 } else if (strcasecmp(s, "voice") == 0) {
756 drate = 8000.0;
757 } else {
758 /* just do an atof */
759 drate = atof(s);
760
761 /*
762 * if the first non-digit is a "k" multiply by 1000,
763 * if it's an "h", leave it alone. anything else,
764 * return an error.
765 */
766
767 /*
768 * XXX bug alert: could have multiple "." in string
769 * and mess things up.
770 */
771 for (cp = s; *cp && (isdigit(*cp) || (*cp == '.')); cp++)
772 /* NOP */;
773 if (*cp != NULL) {
774 if ((*cp == 'k') || (*cp == 'K')) {
775 drate *= 1000.0;
776 } else if ((*cp != 'h') || (*cp != 'H')) {
777 /* bogus! */
778 Error(stderr,
779 MGET("invalid sample rate: %s\n"), s);
780 return (1);
781 }
782 }
783
784 }
785
786 *rate = irint(drate);
787 return (0);
788 }
789