xref: /illumos-gate/usr/src/boot/efi/include/Protocol/StorageSecurityCommand.h (revision f334afcfaebea1b7dc3430015651d8d748fa8a3e)
1 /** @file
2   EFI Storage Security Command Protocol as defined in UEFI 2.3.1 specification.
3   This protocol is used to abstract mass storage devices to allow code running in
4   the EFI boot services environment to send security protocol commands to mass
5   storage devices without specific knowledge of the type of device or controller
6   that manages the device.
7 
8   Copyright (c) 2011 - 2018, Intel Corporation. All rights reserved.<BR>
9   SPDX-License-Identifier: BSD-2-Clause-Patent
10 
11 **/
12 
13 #ifndef __STORAGE_SECURITY_COMMAND_H__
14 #define __STORAGE_SECURITY_COMMAND_H__
15 
16 #define EFI_STORAGE_SECURITY_COMMAND_PROTOCOL_GUID \
17   { \
18     0xC88B0B6D, 0x0DFC, 0x49A7, {0x9C, 0xB4, 0x49, 0x07, 0x4B, 0x4C, 0x3A, 0x78 } \
19   }
20 
21 typedef struct _EFI_STORAGE_SECURITY_COMMAND_PROTOCOL EFI_STORAGE_SECURITY_COMMAND_PROTOCOL;
22 
23 /**
24   Send a security protocol command to a device that receives data and/or the result
25   of one or more commands sent by SendData.
26 
27   The ReceiveData function sends a security protocol command to the given MediaId.
28   The security protocol command sent is defined by SecurityProtocolId and contains
29   the security protocol specific data SecurityProtocolSpecificData. The function
30   returns the data from the security protocol command in PayloadBuffer.
31 
32   For devices supporting the SCSI command set, the security protocol command is sent
33   using the SECURITY PROTOCOL IN command defined in SPC-4.
34 
35   For devices supporting the ATA command set, the security protocol command is sent
36   using one of the TRUSTED RECEIVE commands defined in ATA8-ACS if PayloadBufferSize
37   is non-zero.
38 
39   If the PayloadBufferSize is zero, the security protocol command is sent using the
40   Trusted Non-Data command defined in ATA8-ACS.
41 
42   If PayloadBufferSize is too small to store the available data from the security
43   protocol command, the function shall copy PayloadBufferSize bytes into the
44   PayloadBuffer and return EFI_WARN_BUFFER_TOO_SMALL.
45 
46   If PayloadBuffer or PayloadTransferSize is NULL and PayloadBufferSize is non-zero,
47   the function shall return EFI_INVALID_PARAMETER.
48 
49   If the given MediaId does not support security protocol commands, the function shall
50   return EFI_UNSUPPORTED. If there is no media in the device, the function returns
51   EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the device,
52   the function returns EFI_MEDIA_CHANGED.
53 
54   If the security protocol fails to complete within the Timeout period, the function
55   shall return EFI_TIMEOUT.
56 
57   If the security protocol command completes without an error, the function shall
58   return EFI_SUCCESS. If the security protocol command completes with an error, the
59   function shall return EFI_DEVICE_ERROR.
60 
61   @param  This                         Indicates a pointer to the calling context.
62   @param  MediaId                      ID of the medium to receive data from.
63   @param  Timeout                      The timeout, in 100ns units, to use for the execution
64                                        of the security protocol command. A Timeout value of 0
65                                        means that this function will wait indefinitely for the
66                                        security protocol command to execute. If Timeout is greater
67                                        than zero, then this function will return EFI_TIMEOUT if the
68                                        time required to execute the receive data command is greater than Timeout.
69   @param  SecurityProtocolId           The value of the "Security Protocol" parameter of
70                                        the security protocol command to be sent.
71   @param  SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter
72                                        of the security protocol command to be sent.
73   @param  PayloadBufferSize            Size in bytes of the payload data buffer.
74   @param  PayloadBuffer                A pointer to a destination buffer to store the security
75                                        protocol command specific payload data for the security
76                                        protocol command. The caller is responsible for having
77                                        either implicit or explicit ownership of the buffer.
78   @param  PayloadTransferSize          A pointer to a buffer to store the size in bytes of the
79                                        data written to the payload data buffer.
80 
81   @retval EFI_SUCCESS                  The security protocol command completed successfully.
82   @retval EFI_WARN_BUFFER_TOO_SMALL    The PayloadBufferSize was too small to store the available
83                                        data from the device. The PayloadBuffer contains the truncated data.
84   @retval EFI_UNSUPPORTED              The given MediaId does not support security protocol commands.
85   @retval EFI_DEVICE_ERROR             The security protocol command completed with an error.
86   @retval EFI_NO_MEDIA                 There is no media in the device.
87   @retval EFI_MEDIA_CHANGED            The MediaId is not for the current media.
88   @retval EFI_INVALID_PARAMETER        The PayloadBuffer or PayloadTransferSize is NULL and
89                                        PayloadBufferSize is non-zero.
90   @retval EFI_TIMEOUT                  A timeout occurred while waiting for the security
91                                        protocol command to execute.
92 
93 **/
94 typedef
95 EFI_STATUS
96 (EFIAPI *EFI_STORAGE_SECURITY_RECEIVE_DATA)(
97   IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL    *This,
98   IN UINT32                                   MediaId,
99   IN UINT64                                   Timeout,
100   IN UINT8                                    SecurityProtocolId,
101   IN UINT16                                   SecurityProtocolSpecificData,
102   IN UINTN                                    PayloadBufferSize,
103   OUT VOID                                    *PayloadBuffer,
104   OUT UINTN                                   *PayloadTransferSize
105   );
106 
107 /**
108   Send a security protocol command to a device.
109 
110   The SendData function sends a security protocol command containing the payload
111   PayloadBuffer to the given MediaId. The security protocol command sent is
112   defined by SecurityProtocolId and contains the security protocol specific data
113   SecurityProtocolSpecificData. If the underlying protocol command requires a
114   specific padding for the command payload, the SendData function shall add padding
115   bytes to the command payload to satisfy the padding requirements.
116 
117   For devices supporting the SCSI command set, the security protocol command is sent
118   using the SECURITY PROTOCOL OUT command defined in SPC-4.
119 
120   For devices supporting the ATA command set, the security protocol command is sent
121   using one of the TRUSTED SEND commands defined in ATA8-ACS if PayloadBufferSize
122   is non-zero. If the PayloadBufferSize is zero, the security protocol command is
123   sent using the Trusted Non-Data command defined in ATA8-ACS.
124 
125   If PayloadBuffer is NULL and PayloadBufferSize is non-zero, the function shall
126   return EFI_INVALID_PARAMETER.
127 
128   If the given MediaId does not support security protocol commands, the function
129   shall return EFI_UNSUPPORTED. If there is no media in the device, the function
130   returns EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the
131   device, the function returns EFI_MEDIA_CHANGED.
132 
133   If the security protocol fails to complete within the Timeout period, the function
134   shall return EFI_TIMEOUT.
135 
136   If the security protocol command completes without an error, the function shall return
137   EFI_SUCCESS. If the security protocol command completes with an error, the function
138   shall return EFI_DEVICE_ERROR.
139 
140   @param  This                         Indicates a pointer to the calling context.
141   @param  MediaId                      ID of the medium to receive data from.
142   @param  Timeout                      The timeout, in 100ns units, to use for the execution
143                                        of the security protocol command. A Timeout value of 0
144                                        means that this function will wait indefinitely for the
145                                        security protocol command to execute. If Timeout is greater
146                                        than zero, then this function will return EFI_TIMEOUT if the
147                                        time required to execute the receive data command is greater than Timeout.
148   @param  SecurityProtocolId           The value of the "Security Protocol" parameter of
149                                        the security protocol command to be sent.
150   @param  SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter
151                                        of the security protocol command to be sent.
152   @param  PayloadBufferSize            Size in bytes of the payload data buffer.
153   @param  PayloadBuffer                A pointer to a destination buffer to store the security
154                                        protocol command specific payload data for the security
155                                        protocol command.
156 
157   @retval EFI_SUCCESS                  The security protocol command completed successfully.
158   @retval EFI_UNSUPPORTED              The given MediaId does not support security protocol commands.
159   @retval EFI_DEVICE_ERROR             The security protocol command completed with an error.
160   @retval EFI_NO_MEDIA                 There is no media in the device.
161   @retval EFI_MEDIA_CHANGED            The MediaId is not for the current media.
162   @retval EFI_INVALID_PARAMETER        The PayloadBuffer is NULL and PayloadBufferSize is non-zero.
163   @retval EFI_TIMEOUT                  A timeout occurred while waiting for the security
164                                        protocol command to execute.
165 
166 **/
167 typedef
168 EFI_STATUS
169 (EFIAPI *EFI_STORAGE_SECURITY_SEND_DATA)(
170   IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL    *This,
171   IN UINT32                                   MediaId,
172   IN UINT64                                   Timeout,
173   IN UINT8                                    SecurityProtocolId,
174   IN UINT16                                   SecurityProtocolSpecificData,
175   IN UINTN                                    PayloadBufferSize,
176   IN VOID                                     *PayloadBuffer
177   );
178 
179 ///
180 /// The EFI_STORAGE_SECURITY_COMMAND_PROTOCOL is used to send security protocol
181 /// commands to a mass storage device. Two types of security protocol commands
182 /// are supported. SendData sends a command with data to a device. ReceiveData
183 /// sends a command that receives data and/or the result of one or more commands
184 /// sent by SendData.
185 ///
186 /// The security protocol command formats supported shall be based on the definition
187 /// of the SECURITY PROTOCOL IN and SECURITY PROTOCOL OUT commands defined in SPC-4.
188 /// If the device uses the SCSI command set, no translation is needed in the firmware
189 /// and the firmware can package the parameters into a SECURITY PROTOCOL IN or SECURITY
190 /// PROTOCOL OUT command and send the command to the device. If the device uses a
191 /// non-SCSI command set, the firmware shall map the command and data payload to the
192 /// corresponding command and payload format defined in the non-SCSI command set
193 /// (for example, TRUSTED RECEIVE and TRUSTED SEND in ATA8-ACS).
194 ///
195 /// The firmware shall automatically add an EFI_STORAGE_SECURITY_COMMAND_PROTOCOL
196 /// for any storage devices detected during system boot that support SPC-4, ATA8-ACS
197 /// or their successors.
198 ///
199 struct _EFI_STORAGE_SECURITY_COMMAND_PROTOCOL {
200   EFI_STORAGE_SECURITY_RECEIVE_DATA    ReceiveData;
201   EFI_STORAGE_SECURITY_SEND_DATA       SendData;
202 };
203 
204 extern EFI_GUID  gEfiStorageSecurityCommandProtocolGuid;
205 
206 #endif
207