xref: /titanic_44/usr/src/uts/intel/io/acpica/namespace/nsnames.c (revision cb56572868bfc488bbd3ab847b09db2a25554d44)
1 /*******************************************************************************
2  *
3  * Module Name: nsnames - Name manipulation and search
4  *
5  ******************************************************************************/
6 
7 /*
8  * Copyright (C) 2000 - 2016, Intel Corp.
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43 
44 #include "acpi.h"
45 #include "accommon.h"
46 #include "amlcode.h"
47 #include "acnamesp.h"
48 
49 
50 #define _COMPONENT          ACPI_NAMESPACE
51         ACPI_MODULE_NAME    ("nsnames")
52 
53 
54 /*******************************************************************************
55  *
56  * FUNCTION:    AcpiNsGetExternalPathname
57  *
58  * PARAMETERS:  Node            - Namespace node whose pathname is needed
59  *
60  * RETURN:      Pointer to storage containing the fully qualified name of
61  *              the node, In external format (name segments separated by path
62  *              separators.)
63  *
64  * DESCRIPTION: Used to obtain the full pathname to a namespace node, usually
65  *              for error and debug statements.
66  *
67  ******************************************************************************/
68 
69 char *
AcpiNsGetExternalPathname(ACPI_NAMESPACE_NODE * Node)70 AcpiNsGetExternalPathname (
71     ACPI_NAMESPACE_NODE     *Node)
72 {
73     char                    *NameBuffer;
74 
75 
76     ACPI_FUNCTION_TRACE_PTR (NsGetExternalPathname, Node);
77 
78 
79     NameBuffer = AcpiNsGetNormalizedPathname (Node, FALSE);
80     return_PTR (NameBuffer);
81 }
82 
83 
84 /*******************************************************************************
85  *
86  * FUNCTION:    AcpiNsGetPathnameLength
87  *
88  * PARAMETERS:  Node        - Namespace node
89  *
90  * RETURN:      Length of path, including prefix
91  *
92  * DESCRIPTION: Get the length of the pathname string for this node
93  *
94  ******************************************************************************/
95 
96 ACPI_SIZE
AcpiNsGetPathnameLength(ACPI_NAMESPACE_NODE * Node)97 AcpiNsGetPathnameLength (
98     ACPI_NAMESPACE_NODE     *Node)
99 {
100     ACPI_SIZE               Size;
101 
102 
103     ACPI_FUNCTION_ENTRY ();
104 
105 
106     Size = AcpiNsBuildNormalizedPath (Node, NULL, 0, FALSE);
107     return (Size);
108 }
109 
110 
111 /*******************************************************************************
112  *
113  * FUNCTION:    AcpiNsHandleToPathname
114  *
115  * PARAMETERS:  TargetHandle            - Handle of named object whose name is
116  *                                        to be found
117  *              Buffer                  - Where the pathname is returned
118  *              NoTrailing              - Remove trailing '_' for each name
119  *                                        segment
120  *
121  * RETURN:      Status, Buffer is filled with pathname if status is AE_OK
122  *
123  * DESCRIPTION: Build and return a full namespace pathname
124  *
125  ******************************************************************************/
126 
127 ACPI_STATUS
AcpiNsHandleToPathname(ACPI_HANDLE TargetHandle,ACPI_BUFFER * Buffer,BOOLEAN NoTrailing)128 AcpiNsHandleToPathname (
129     ACPI_HANDLE             TargetHandle,
130     ACPI_BUFFER             *Buffer,
131     BOOLEAN                 NoTrailing)
132 {
133     ACPI_STATUS             Status;
134     ACPI_NAMESPACE_NODE     *Node;
135     ACPI_SIZE               RequiredSize;
136 
137 
138     ACPI_FUNCTION_TRACE_PTR (NsHandleToPathname, TargetHandle);
139 
140 
141     Node = AcpiNsValidateHandle (TargetHandle);
142     if (!Node)
143     {
144         return_ACPI_STATUS (AE_BAD_PARAMETER);
145     }
146 
147     /* Determine size required for the caller buffer */
148 
149     RequiredSize = AcpiNsBuildNormalizedPath (Node, NULL, 0, NoTrailing);
150     if (!RequiredSize)
151     {
152         return_ACPI_STATUS (AE_BAD_PARAMETER);
153     }
154 
155     /* Validate/Allocate/Clear caller buffer */
156 
157     Status = AcpiUtInitializeBuffer (Buffer, RequiredSize);
158     if (ACPI_FAILURE (Status))
159     {
160         return_ACPI_STATUS (Status);
161     }
162 
163     /* Build the path in the caller buffer */
164 
165     (void) AcpiNsBuildNormalizedPath (Node, Buffer->Pointer,
166         RequiredSize, NoTrailing);
167     if (ACPI_FAILURE (Status))
168     {
169         return_ACPI_STATUS (Status);
170     }
171 
172     ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "%s [%X]\n",
173         (char *) Buffer->Pointer, (UINT32) RequiredSize));
174     return_ACPI_STATUS (AE_OK);
175 }
176 
177 
178 /*******************************************************************************
179  *
180  * FUNCTION:    AcpiNsBuildNormalizedPath
181  *
182  * PARAMETERS:  Node        - Namespace node
183  *              FullPath    - Where the path name is returned
184  *              PathSize    - Size of returned path name buffer
185  *              NoTrailing  - Remove trailing '_' from each name segment
186  *
187  * RETURN:      Return 1 if the AML path is empty, otherwise returning (length
188  *              of pathname + 1) which means the 'FullPath' contains a trailing
189  *              null.
190  *
191  * DESCRIPTION: Build and return a full namespace pathname.
192  *              Note that if the size of 'FullPath' isn't large enough to
193  *              contain the namespace node's path name, the actual required
194  *              buffer length is returned, and it should be greater than
195  *              'PathSize'. So callers are able to check the returning value
196  *              to determine the buffer size of 'FullPath'.
197  *
198  ******************************************************************************/
199 
200 UINT32
AcpiNsBuildNormalizedPath(ACPI_NAMESPACE_NODE * Node,char * FullPath,UINT32 PathSize,BOOLEAN NoTrailing)201 AcpiNsBuildNormalizedPath (
202     ACPI_NAMESPACE_NODE     *Node,
203     char                    *FullPath,
204     UINT32                  PathSize,
205     BOOLEAN                 NoTrailing)
206 {
207     UINT32                  Length = 0, i;
208     char                    Name[ACPI_NAME_SIZE];
209     BOOLEAN                 DoNoTrailing;
210     char                    c, *Left, *Right;
211     ACPI_NAMESPACE_NODE     *NextNode;
212 
213 
214     ACPI_FUNCTION_TRACE_PTR (NsBuildNormalizedPath, Node);
215 
216 
217 #define ACPI_PATH_PUT8(Path, Size, Byte, Length)    \
218     do {                                            \
219         if ((Length) < (Size))                      \
220         {                                           \
221             (Path)[(Length)] = (Byte);              \
222         }                                           \
223         (Length)++;                                 \
224     } while (0)
225 
226     /*
227      * Make sure the PathSize is correct, so that we don't need to
228      * validate both FullPath and PathSize.
229      */
230     if (!FullPath)
231     {
232         PathSize = 0;
233     }
234 
235     if (!Node)
236     {
237         goto BuildTrailingNull;
238     }
239 
240     NextNode = Node;
241     while (NextNode && NextNode != AcpiGbl_RootNode)
242     {
243         if (NextNode != Node)
244         {
245             ACPI_PATH_PUT8(FullPath, PathSize, AML_DUAL_NAME_PREFIX, Length);
246         }
247 
248         ACPI_MOVE_32_TO_32 (Name, &NextNode->Name);
249         DoNoTrailing = NoTrailing;
250         for (i = 0; i < 4; i++)
251         {
252             c = Name[4-i-1];
253             if (DoNoTrailing && c != '_')
254             {
255                 DoNoTrailing = FALSE;
256             }
257             if (!DoNoTrailing)
258             {
259                 ACPI_PATH_PUT8(FullPath, PathSize, c, Length);
260             }
261         }
262 
263         NextNode = NextNode->Parent;
264     }
265 
266     ACPI_PATH_PUT8(FullPath, PathSize, AML_ROOT_PREFIX, Length);
267 
268     /* Reverse the path string */
269 
270     if (Length <= PathSize)
271     {
272         Left = FullPath;
273         Right = FullPath+Length - 1;
274 
275         while (Left < Right)
276         {
277             c = *Left;
278             *Left++ = *Right;
279             *Right-- = c;
280         }
281     }
282 
283     /* Append the trailing null */
284 
285 BuildTrailingNull:
286     ACPI_PATH_PUT8 (FullPath, PathSize, '\0', Length);
287 
288 #undef ACPI_PATH_PUT8
289 
290     return_UINT32 (Length);
291 }
292 
293 
294 /*******************************************************************************
295  *
296  * FUNCTION:    AcpiNsGetNormalizedPathname
297  *
298  * PARAMETERS:  Node            - Namespace node whose pathname is needed
299  *              NoTrailing      - Remove trailing '_' from each name segment
300  *
301  * RETURN:      Pointer to storage containing the fully qualified name of
302  *              the node, In external format (name segments separated by path
303  *              separators.)
304  *
305  * DESCRIPTION: Used to obtain the full pathname to a namespace node, usually
306  *              for error and debug statements. All trailing '_' will be
307  *              removed from the full pathname if 'NoTrailing' is specified..
308  *
309  ******************************************************************************/
310 
311 char *
AcpiNsGetNormalizedPathname(ACPI_NAMESPACE_NODE * Node,BOOLEAN NoTrailing)312 AcpiNsGetNormalizedPathname (
313     ACPI_NAMESPACE_NODE     *Node,
314     BOOLEAN                 NoTrailing)
315 {
316     char                    *NameBuffer;
317     ACPI_SIZE               Size;
318 
319 
320     ACPI_FUNCTION_TRACE_PTR (NsGetNormalizedPathname, Node);
321 
322 
323     /* Calculate required buffer size based on depth below root */
324 
325     Size = AcpiNsBuildNormalizedPath (Node, NULL, 0, NoTrailing);
326     if (!Size)
327     {
328         return_PTR (NULL);
329     }
330 
331     /* Allocate a buffer to be returned to caller */
332 
333     NameBuffer = ACPI_ALLOCATE_ZEROED (Size);
334     if (!NameBuffer)
335     {
336         ACPI_ERROR ((AE_INFO,
337             "Could not allocate %u bytes", (UINT32) Size));
338         return_PTR (NULL);
339     }
340 
341     /* Build the path in the allocated buffer */
342 
343     (void) AcpiNsBuildNormalizedPath (Node, NameBuffer, Size, NoTrailing);
344 
345     return_PTR (NameBuffer);
346 }
347