1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Copyright (c) 2001-2002 by David Brownell
4 */
5
6 #ifndef __USB_CORE_HCD_H
7 #define __USB_CORE_HCD_H
8
9 #ifdef __KERNEL__
10
11 #include <linux/rwsem.h>
12 #include <linux/interrupt.h>
13 #include <linux/idr.h>
14
15 #define MAX_TOPO_LEVEL 6
16
17 /* This file contains declarations of usbcore internals that are mostly
18 * used or exposed by Host Controller Drivers.
19 */
20
21 /*
22 * USB Packet IDs (PIDs)
23 */
24 #define USB_PID_EXT 0xf0 /* USB 2.0 LPM ECN */
25 #define USB_PID_OUT 0xe1
26 #define USB_PID_ACK 0xd2
27 #define USB_PID_DATA0 0xc3
28 #define USB_PID_PING 0xb4 /* USB 2.0 */
29 #define USB_PID_SOF 0xa5
30 #define USB_PID_NYET 0x96 /* USB 2.0 */
31 #define USB_PID_DATA2 0x87 /* USB 2.0 */
32 #define USB_PID_SPLIT 0x78 /* USB 2.0 */
33 #define USB_PID_IN 0x69
34 #define USB_PID_NAK 0x5a
35 #define USB_PID_DATA1 0x4b
36 #define USB_PID_PREAMBLE 0x3c /* Token mode */
37 #define USB_PID_ERR 0x3c /* USB 2.0: handshake mode */
38 #define USB_PID_SETUP 0x2d
39 #define USB_PID_STALL 0x1e
40 #define USB_PID_MDATA 0x0f /* USB 2.0 */
41
42 /*-------------------------------------------------------------------------*/
43
44 /*
45 * USB Host Controller Driver (usb_hcd) framework
46 *
47 * Since "struct usb_bus" is so thin, you can't share much code in it.
48 * This framework is a layer over that, and should be more shareable.
49 */
50
51 /*-------------------------------------------------------------------------*/
52
53 struct giveback_urb_bh {
54 bool running;
55 bool high_prio;
56 spinlock_t lock;
57 struct list_head head;
58 struct work_struct bh;
59 struct usb_host_endpoint *completing_ep;
60 };
61
62 enum usb_dev_authorize_policy {
63 USB_DEVICE_AUTHORIZE_NONE = 0,
64 USB_DEVICE_AUTHORIZE_ALL = 1,
65 USB_DEVICE_AUTHORIZE_INTERNAL = 2,
66 };
67
68 struct usb_hcd {
69
70 /*
71 * housekeeping
72 */
73 struct usb_bus self; /* hcd is-a bus */
74 struct kref kref; /* reference counter */
75
76 const char *product_desc; /* product/vendor string */
77 int speed; /* Speed for this roothub.
78 * May be different from
79 * hcd->driver->flags & HCD_MASK
80 */
81 char irq_descr[24]; /* driver + bus # */
82
83 struct timer_list rh_timer; /* drives root-hub polling */
84 struct urb *status_urb; /* the current status urb */
85 #ifdef CONFIG_PM
86 struct work_struct wakeup_work; /* for remote wakeup */
87 #endif
88 struct work_struct died_work; /* for when the device dies */
89
90 /*
91 * hardware info/state
92 */
93 const struct hc_driver *driver; /* hw-specific hooks */
94
95 /*
96 * OTG and some Host controllers need software interaction with phys;
97 * other external phys should be software-transparent
98 */
99 struct usb_phy *usb_phy;
100 struct usb_phy_roothub *phy_roothub;
101
102 /* Flags that need to be manipulated atomically because they can
103 * change while the host controller is running. Always use
104 * set_bit() or clear_bit() to change their values.
105 */
106 unsigned long flags;
107 #define HCD_FLAG_HW_ACCESSIBLE 0 /* at full power */
108 #define HCD_FLAG_POLL_RH 2 /* poll for rh status? */
109 #define HCD_FLAG_POLL_PENDING 3 /* status has changed? */
110 #define HCD_FLAG_WAKEUP_PENDING 4 /* root hub is resuming? */
111 #define HCD_FLAG_RH_RUNNING 5 /* root hub is running? */
112 #define HCD_FLAG_DEAD 6 /* controller has died? */
113 #define HCD_FLAG_INTF_AUTHORIZED 7 /* authorize interfaces? */
114 #define HCD_FLAG_DEFER_RH_REGISTER 8 /* Defer roothub registration */
115
116 /* The flags can be tested using these macros; they are likely to
117 * be slightly faster than test_bit().
118 */
119 #define HCD_HW_ACCESSIBLE(hcd) ((hcd)->flags & (1U << HCD_FLAG_HW_ACCESSIBLE))
120 #define HCD_POLL_RH(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_RH))
121 #define HCD_POLL_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING))
122 #define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING))
123 #define HCD_RH_RUNNING(hcd) ((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING))
124 #define HCD_DEAD(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEAD))
125 #define HCD_DEFER_RH_REGISTER(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEFER_RH_REGISTER))
126
127 /*
128 * Specifies if interfaces are authorized by default
129 * or they require explicit user space authorization; this bit is
130 * settable through /sys/class/usb_host/X/interface_authorized_default
131 */
132 #define HCD_INTF_AUTHORIZED(hcd) \
133 ((hcd)->flags & (1U << HCD_FLAG_INTF_AUTHORIZED))
134
135 /*
136 * Specifies if devices are authorized by default
137 * or they require explicit user space authorization; this bit is
138 * settable through /sys/class/usb_host/X/authorized_default
139 */
140 enum usb_dev_authorize_policy dev_policy;
141
142 /* Flags that get set only during HCD registration or removal. */
143 unsigned rh_registered:1;/* is root hub registered? */
144 unsigned rh_pollable:1; /* may we poll the root hub? */
145 unsigned msix_enabled:1; /* driver has MSI-X enabled? */
146 unsigned msi_enabled:1; /* driver has MSI enabled? */
147 /*
148 * do not manage the PHY state in the HCD core, instead let the driver
149 * handle this (for example if the PHY can only be turned on after a
150 * specific event)
151 */
152 unsigned skip_phy_initialization:1;
153
154 /* The next flag is a stopgap, to be removed when all the HCDs
155 * support the new root-hub polling mechanism. */
156 unsigned uses_new_polling:1;
157 unsigned has_tt:1; /* Integrated TT in root hub */
158 unsigned amd_resume_bug:1; /* AMD remote wakeup quirk */
159 unsigned can_do_streams:1; /* HC supports streams */
160 unsigned tpl_support:1; /* OTG & EH TPL support */
161 unsigned cant_recv_wakeups:1;
162 /* wakeup requests from downstream aren't received */
163
164 unsigned int irq; /* irq allocated */
165 void __iomem *regs; /* device memory/io */
166 resource_size_t rsrc_start; /* memory/io resource start */
167 resource_size_t rsrc_len; /* memory/io resource length */
168 unsigned power_budget; /* in mA, 0 = no limit */
169
170 struct giveback_urb_bh high_prio_bh;
171 struct giveback_urb_bh low_prio_bh;
172
173 /* bandwidth_mutex should be taken before adding or removing
174 * any new bus bandwidth constraints:
175 * 1. Before adding a configuration for a new device.
176 * 2. Before removing the configuration to put the device into
177 * the addressed state.
178 * 3. Before selecting a different configuration.
179 * 4. Before selecting an alternate interface setting.
180 *
181 * bandwidth_mutex should be dropped after a successful control message
182 * to the device, or resetting the bandwidth after a failed attempt.
183 */
184 struct mutex *address0_mutex;
185 struct mutex *bandwidth_mutex;
186 struct usb_hcd *shared_hcd;
187 struct usb_hcd *primary_hcd;
188
189
190 #define HCD_BUFFER_POOLS 4
191 struct dma_pool *pool[HCD_BUFFER_POOLS];
192
193 int state;
194 # define __ACTIVE 0x01
195 # define __SUSPEND 0x04
196 # define __TRANSIENT 0x80
197
198 # define HC_STATE_HALT 0
199 # define HC_STATE_RUNNING (__ACTIVE)
200 # define HC_STATE_QUIESCING (__SUSPEND|__TRANSIENT|__ACTIVE)
201 # define HC_STATE_RESUMING (__SUSPEND|__TRANSIENT)
202 # define HC_STATE_SUSPENDED (__SUSPEND)
203
204 #define HC_IS_RUNNING(state) ((state) & __ACTIVE)
205 #define HC_IS_SUSPENDED(state) ((state) & __SUSPEND)
206
207 /* memory pool for HCs having local memory, or %NULL */
208 struct gen_pool *localmem_pool;
209
210 /* more shared queuing code would be good; it should support
211 * smarter scheduling, handle transaction translators, etc;
212 * input size of periodic table to an interrupt scheduler.
213 * (ohci 32, uhci 1024, ehci 256/512/1024).
214 */
215
216 /* The HC driver's private data is stored at the end of
217 * this structure.
218 */
219 unsigned long hcd_priv[]
220 __attribute__ ((aligned(sizeof(s64))));
221 };
222
223 /* 2.4 does this a bit differently ... */
hcd_to_bus(struct usb_hcd * hcd)224 static inline struct usb_bus *hcd_to_bus(struct usb_hcd *hcd)
225 {
226 return &hcd->self;
227 }
228
bus_to_hcd(struct usb_bus * bus)229 static inline struct usb_hcd *bus_to_hcd(struct usb_bus *bus)
230 {
231 return container_of(bus, struct usb_hcd, self);
232 }
233
234 /*-------------------------------------------------------------------------*/
235
236
237 struct hc_driver {
238 const char *description; /* "ehci-hcd" etc */
239 const char *product_desc; /* product/vendor string */
240 size_t hcd_priv_size; /* size of private data */
241
242 /* irq handler */
243 irqreturn_t (*irq) (struct usb_hcd *hcd);
244
245 int flags;
246 #define HCD_MEMORY 0x0001 /* HC regs use memory (else I/O) */
247 #define HCD_DMA 0x0002 /* HC uses DMA */
248 #define HCD_SHARED 0x0004 /* Two (or more) usb_hcds share HW */
249 #define HCD_USB11 0x0010 /* USB 1.1 */
250 #define HCD_USB2 0x0020 /* USB 2.0 */
251 #define HCD_USB3 0x0040 /* USB 3.0 */
252 #define HCD_USB31 0x0050 /* USB 3.1 */
253 #define HCD_USB32 0x0060 /* USB 3.2 */
254 #define HCD_MASK 0x0070
255 #define HCD_BH 0x0100 /* URB complete in BH context */
256
257 /* called to init HCD and root hub */
258 int (*reset) (struct usb_hcd *hcd);
259 int (*start) (struct usb_hcd *hcd);
260
261 /* NOTE: these suspend/resume calls relate to the HC as
262 * a whole, not just the root hub; they're for PCI bus glue.
263 */
264 /* called after suspending the hub, before entering D3 etc */
265 int (*pci_suspend)(struct usb_hcd *hcd, bool do_wakeup);
266
267 /* called after entering D0 (etc), before resuming the hub */
268 int (*pci_resume)(struct usb_hcd *hcd, pm_message_t state);
269
270 /* called just before hibernate final D3 state, allows host to poweroff parts */
271 int (*pci_poweroff_late)(struct usb_hcd *hcd, bool do_wakeup);
272
273 /* cleanly make HCD stop writing memory and doing I/O */
274 void (*stop) (struct usb_hcd *hcd);
275
276 /* shutdown HCD */
277 void (*shutdown) (struct usb_hcd *hcd);
278
279 /* return current frame number */
280 int (*get_frame_number) (struct usb_hcd *hcd);
281
282 /* manage i/o requests, device state */
283 int (*urb_enqueue)(struct usb_hcd *hcd,
284 struct urb *urb, gfp_t mem_flags);
285 int (*urb_dequeue)(struct usb_hcd *hcd,
286 struct urb *urb, int status);
287
288 /*
289 * (optional) these hooks allow an HCD to override the default DMA
290 * mapping and unmapping routines. In general, they shouldn't be
291 * necessary unless the host controller has special DMA requirements,
292 * such as alignment constraints. If these are not specified, the
293 * general usb_hcd_(un)?map_urb_for_dma functions will be used instead
294 * (and it may be a good idea to call these functions in your HCD
295 * implementation)
296 */
297 int (*map_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb,
298 gfp_t mem_flags);
299 void (*unmap_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb);
300
301 /* hw synch, freeing endpoint resources that urb_dequeue can't */
302 void (*endpoint_disable)(struct usb_hcd *hcd,
303 struct usb_host_endpoint *ep);
304
305 /* (optional) reset any endpoint state such as sequence number
306 and current window */
307 void (*endpoint_reset)(struct usb_hcd *hcd,
308 struct usb_host_endpoint *ep);
309
310 /* root hub support */
311 int (*hub_status_data) (struct usb_hcd *hcd, char *buf);
312 int (*hub_control) (struct usb_hcd *hcd,
313 u16 typeReq, u16 wValue, u16 wIndex,
314 char *buf, u16 wLength);
315 int (*bus_suspend)(struct usb_hcd *);
316 int (*bus_resume)(struct usb_hcd *);
317 int (*start_port_reset)(struct usb_hcd *, unsigned port_num);
318 unsigned long (*get_resuming_ports)(struct usb_hcd *);
319
320 /* force handover of high-speed port to full-speed companion */
321 void (*relinquish_port)(struct usb_hcd *, int);
322 /* has a port been handed over to a companion? */
323 int (*port_handed_over)(struct usb_hcd *, int);
324
325 /* CLEAR_TT_BUFFER completion callback */
326 void (*clear_tt_buffer_complete)(struct usb_hcd *,
327 struct usb_host_endpoint *);
328
329 /* xHCI specific functions */
330 /* Called by usb_alloc_dev to alloc HC device structures */
331 int (*alloc_dev)(struct usb_hcd *, struct usb_device *);
332 /* Called by usb_disconnect to free HC device structures */
333 void (*free_dev)(struct usb_hcd *, struct usb_device *);
334 /* Change a group of bulk endpoints to support multiple stream IDs */
335 int (*alloc_streams)(struct usb_hcd *hcd, struct usb_device *udev,
336 struct usb_host_endpoint **eps, unsigned int num_eps,
337 unsigned int num_streams, gfp_t mem_flags);
338 /* Reverts a group of bulk endpoints back to not using stream IDs.
339 * Can fail if we run out of memory.
340 */
341 int (*free_streams)(struct usb_hcd *hcd, struct usb_device *udev,
342 struct usb_host_endpoint **eps, unsigned int num_eps,
343 gfp_t mem_flags);
344
345 /* Bandwidth computation functions */
346 /* Note that add_endpoint() can only be called once per endpoint before
347 * check_bandwidth() or reset_bandwidth() must be called.
348 * drop_endpoint() can only be called once per endpoint also.
349 * A call to xhci_drop_endpoint() followed by a call to
350 * xhci_add_endpoint() will add the endpoint to the schedule with
351 * possibly new parameters denoted by a different endpoint descriptor
352 * in usb_host_endpoint. A call to xhci_add_endpoint() followed by a
353 * call to xhci_drop_endpoint() is not allowed.
354 */
355 /* Allocate endpoint resources and add them to a new schedule */
356 int (*add_endpoint)(struct usb_hcd *, struct usb_device *,
357 struct usb_host_endpoint *);
358 /* Drop an endpoint from a new schedule */
359 int (*drop_endpoint)(struct usb_hcd *, struct usb_device *,
360 struct usb_host_endpoint *);
361 /* Check that a new hardware configuration, set using
362 * endpoint_enable and endpoint_disable, does not exceed bus
363 * bandwidth. This must be called before any set configuration
364 * or set interface requests are sent to the device.
365 */
366 int (*check_bandwidth)(struct usb_hcd *, struct usb_device *);
367 /* Reset the device schedule to the last known good schedule,
368 * which was set from a previous successful call to
369 * check_bandwidth(). This reverts any add_endpoint() and
370 * drop_endpoint() calls since that last successful call.
371 * Used for when a check_bandwidth() call fails due to resource
372 * or bandwidth constraints.
373 */
374 void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
375 /* Set the hardware-chosen device address */
376 int (*address_device)(struct usb_hcd *, struct usb_device *udev,
377 unsigned int timeout_ms);
378 /* prepares the hardware to send commands to the device */
379 int (*enable_device)(struct usb_hcd *, struct usb_device *udev);
380 /* Notifies the HCD after a hub descriptor is fetched.
381 * Will block.
382 */
383 int (*update_hub_device)(struct usb_hcd *, struct usb_device *hdev,
384 struct usb_tt *tt, gfp_t mem_flags);
385 int (*reset_device)(struct usb_hcd *, struct usb_device *);
386 /* Notifies the HCD after a device is connected and its
387 * address is set
388 */
389 int (*update_device)(struct usb_hcd *, struct usb_device *);
390 int (*set_usb2_hw_lpm)(struct usb_hcd *, struct usb_device *, int);
391 /* USB 3.0 Link Power Management */
392 /* Returns the USB3 hub-encoded value for the U1/U2 timeout. */
393 int (*enable_usb3_lpm_timeout)(struct usb_hcd *,
394 struct usb_device *, enum usb3_link_state state);
395 /* The xHCI host controller can still fail the command to
396 * disable the LPM timeouts, so this can return an error code.
397 */
398 int (*disable_usb3_lpm_timeout)(struct usb_hcd *,
399 struct usb_device *, enum usb3_link_state state);
400 int (*find_raw_port_number)(struct usb_hcd *, int);
401 /* Call for power on/off the port if necessary */
402 int (*port_power)(struct usb_hcd *hcd, int portnum, bool enable);
403 /* Call for SINGLE_STEP_SET_FEATURE Test for USB2 EH certification */
404 #define EHSET_TEST_SINGLE_STEP_SET_FEATURE 0x06
405 int (*submit_single_step_set_feature)(struct usb_hcd *,
406 struct urb *, int);
407 };
408
hcd_giveback_urb_in_bh(struct usb_hcd * hcd)409 static inline int hcd_giveback_urb_in_bh(struct usb_hcd *hcd)
410 {
411 return hcd->driver->flags & HCD_BH;
412 }
413
hcd_periodic_completion_in_progress(struct usb_hcd * hcd,struct usb_host_endpoint * ep)414 static inline bool hcd_periodic_completion_in_progress(struct usb_hcd *hcd,
415 struct usb_host_endpoint *ep)
416 {
417 return hcd->high_prio_bh.completing_ep == ep;
418 }
419
hcd_uses_dma(struct usb_hcd * hcd)420 static inline bool hcd_uses_dma(struct usb_hcd *hcd)
421 {
422 return IS_ENABLED(CONFIG_HAS_DMA) && (hcd->driver->flags & HCD_DMA);
423 }
424
425 extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
426 extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
427 int status);
428 extern void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb);
429
430 extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags);
431 extern int usb_hcd_unlink_urb(struct urb *urb, int status);
432 extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb,
433 int status);
434 extern int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
435 gfp_t mem_flags);
436 extern void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *, struct urb *);
437 extern void usb_hcd_unmap_urb_for_dma(struct usb_hcd *, struct urb *);
438 extern void usb_hcd_flush_endpoint(struct usb_device *udev,
439 struct usb_host_endpoint *ep);
440 extern void usb_hcd_disable_endpoint(struct usb_device *udev,
441 struct usb_host_endpoint *ep);
442 extern void usb_hcd_reset_endpoint(struct usb_device *udev,
443 struct usb_host_endpoint *ep);
444 extern void usb_hcd_synchronize_unlinks(struct usb_device *udev);
445 extern int usb_hcd_alloc_bandwidth(struct usb_device *udev,
446 struct usb_host_config *new_config,
447 struct usb_host_interface *old_alt,
448 struct usb_host_interface *new_alt);
449 extern int usb_hcd_get_frame_number(struct usb_device *udev);
450
451 struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver,
452 struct device *sysdev, struct device *dev, const char *bus_name,
453 struct usb_hcd *primary_hcd);
454 extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
455 struct device *dev, const char *bus_name);
456 extern struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
457 struct device *dev, const char *bus_name,
458 struct usb_hcd *shared_hcd);
459 extern struct usb_hcd *usb_get_hcd(struct usb_hcd *hcd);
460 extern void usb_put_hcd(struct usb_hcd *hcd);
461 extern int usb_hcd_is_primary_hcd(struct usb_hcd *hcd);
462 extern int usb_add_hcd(struct usb_hcd *hcd,
463 unsigned int irqnum, unsigned long irqflags);
464 extern void usb_remove_hcd(struct usb_hcd *hcd);
465 extern int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1);
466 int usb_hcd_setup_local_mem(struct usb_hcd *hcd, phys_addr_t phys_addr,
467 dma_addr_t dma, size_t size);
468
469 struct platform_device;
470 extern void usb_hcd_platform_shutdown(struct platform_device *dev);
471 #ifdef CONFIG_USB_HCD_TEST_MODE
472 extern int ehset_single_step_set_feature(struct usb_hcd *hcd, int port);
473 #else
ehset_single_step_set_feature(struct usb_hcd * hcd,int port)474 static inline int ehset_single_step_set_feature(struct usb_hcd *hcd, int port)
475 {
476 return 0;
477 }
478 #endif /* CONFIG_USB_HCD_TEST_MODE */
479
480 #ifdef CONFIG_USB_PCI
481 struct pci_dev;
482 struct pci_device_id;
483 extern int usb_hcd_pci_probe(struct pci_dev *dev,
484 const struct hc_driver *driver);
485 extern void usb_hcd_pci_remove(struct pci_dev *dev);
486 extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
487
488 #ifdef CONFIG_USB_PCI_AMD
489 extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev);
490
usb_hcd_amd_resume_bug(struct pci_dev * dev,const struct hc_driver * driver)491 static inline bool usb_hcd_amd_resume_bug(struct pci_dev *dev,
492 const struct hc_driver *driver)
493 {
494 if (!usb_hcd_amd_remote_wakeup_quirk(dev))
495 return false;
496 if (driver->flags & (HCD_USB11 | HCD_USB3))
497 return true;
498 return false;
499 }
500 #else /* CONFIG_USB_PCI_AMD */
usb_hcd_amd_resume_bug(struct pci_dev * dev,const struct hc_driver * driver)501 static inline bool usb_hcd_amd_resume_bug(struct pci_dev *dev,
502 const struct hc_driver *driver)
503 {
504 return false;
505 }
506 #endif
507 extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
508 #endif /* CONFIG_USB_PCI */
509
510 /* pci-ish (pdev null is ok) buffer alloc/mapping support */
511 void usb_init_pool_max(void);
512 int hcd_buffer_create(struct usb_hcd *hcd);
513 void hcd_buffer_destroy(struct usb_hcd *hcd);
514
515 void *hcd_buffer_alloc(struct usb_bus *bus, size_t size,
516 gfp_t mem_flags, dma_addr_t *dma);
517 void hcd_buffer_free(struct usb_bus *bus, size_t size,
518 void *addr, dma_addr_t dma);
519
520 void *hcd_buffer_alloc_pages(struct usb_hcd *hcd,
521 size_t size, gfp_t mem_flags, dma_addr_t *dma);
522 void hcd_buffer_free_pages(struct usb_hcd *hcd,
523 size_t size, void *addr, dma_addr_t dma);
524
525 /* generic bus glue, needed for host controllers that don't use PCI */
526 extern irqreturn_t usb_hcd_irq(int irq, void *__hcd);
527
528 extern void usb_hc_died(struct usb_hcd *hcd);
529 extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
530 extern void usb_wakeup_notification(struct usb_device *hdev,
531 unsigned int portnum);
532
533 extern void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum);
534 extern void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum);
535
536 /* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
537 #define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
538 #define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep)))
539 #define usb_settoggle(dev, ep, out, bit) \
540 ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
541 ((bit) << (ep)))
542
543 /* -------------------------------------------------------------------------- */
544
545 /* Enumeration is only for the hub driver, or HCD virtual root hubs */
546 extern struct usb_device *usb_alloc_dev(struct usb_device *parent,
547 struct usb_bus *, unsigned port);
548 extern int usb_new_device(struct usb_device *dev);
549 extern void usb_disconnect(struct usb_device **);
550
551 extern int usb_get_configuration(struct usb_device *dev);
552 extern void usb_destroy_configuration(struct usb_device *dev);
553
554 /*-------------------------------------------------------------------------*/
555
556 /*
557 * HCD Root Hub support
558 */
559
560 #include <linux/usb/ch11.h>
561
562 /*
563 * As of USB 2.0, full/low speed devices are segregated into trees.
564 * One type grows from USB 1.1 host controllers (OHCI, UHCI etc).
565 * The other type grows from high speed hubs when they connect to
566 * full/low speed devices using "Transaction Translators" (TTs).
567 *
568 * TTs should only be known to the hub driver, and high speed bus
569 * drivers (only EHCI for now). They affect periodic scheduling and
570 * sometimes control/bulk error recovery.
571 */
572
573 struct usb_device;
574
575 struct usb_tt {
576 struct usb_device *hub; /* upstream highspeed hub */
577 int multi; /* true means one TT per port */
578 unsigned think_time; /* think time in ns */
579 void *hcpriv; /* HCD private data */
580
581 /* for control/bulk error recovery (CLEAR_TT_BUFFER) */
582 spinlock_t lock;
583 struct list_head clear_list; /* of usb_tt_clear */
584 struct work_struct clear_work;
585 };
586
587 struct usb_tt_clear {
588 struct list_head clear_list;
589 unsigned tt;
590 u16 devinfo;
591 struct usb_hcd *hcd;
592 struct usb_host_endpoint *ep;
593 };
594
595 extern int usb_hub_clear_tt_buffer(struct urb *urb);
596 extern void usb_ep0_reinit(struct usb_device *);
597
598 /* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
599 #define DeviceRequest \
600 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
601 #define DeviceOutRequest \
602 ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
603
604 #define InterfaceRequest \
605 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
606
607 #define EndpointRequest \
608 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8)
609 #define EndpointOutRequest \
610 ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8)
611
612 /* class requests from the USB 2.0 hub spec, table 11-15 */
613 #define HUB_CLASS_REQ(dir, type, request) ((((dir) | (type)) << 8) | (request))
614 /* GetBusState and SetHubDescriptor are optional, omitted */
615 #define ClearHubFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, USB_REQ_CLEAR_FEATURE)
616 #define ClearPortFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, USB_REQ_CLEAR_FEATURE)
617 #define GetHubDescriptor HUB_CLASS_REQ(USB_DIR_IN, USB_RT_HUB, USB_REQ_GET_DESCRIPTOR)
618 #define GetHubStatus HUB_CLASS_REQ(USB_DIR_IN, USB_RT_HUB, USB_REQ_GET_STATUS)
619 #define GetPortStatus HUB_CLASS_REQ(USB_DIR_IN, USB_RT_PORT, USB_REQ_GET_STATUS)
620 #define SetHubFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, USB_REQ_SET_FEATURE)
621 #define SetPortFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, USB_REQ_SET_FEATURE)
622 #define ClearTTBuffer HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, HUB_CLEAR_TT_BUFFER)
623 #define ResetTT HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, HUB_RESET_TT)
624 #define GetTTState HUB_CLASS_REQ(USB_DIR_IN, USB_RT_PORT, HUB_GET_TT_STATE)
625 #define StopTT HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, HUB_STOP_TT)
626
627
628 /*-------------------------------------------------------------------------*/
629
630 /* class requests from USB 3.1 hub spec, table 10-7 */
631 #define SetHubDepth HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, HUB_SET_DEPTH)
632 #define GetPortErrorCount HUB_CLASS_REQ(USB_DIR_IN, USB_RT_PORT, HUB_GET_PORT_ERR_COUNT)
633
634 /*
635 * Generic bandwidth allocation constants/support
636 */
637 #define FRAME_TIME_USECS 1000L
638 #define BitTime(bytecount) (7 * 8 * bytecount / 6) /* with integer truncation */
639 /* Trying not to use worst-case bit-stuffing
640 * of (7/6 * 8 * bytecount) = 9.33 * bytecount */
641 /* bytecount = data payload byte count */
642
643 #define NS_TO_US(ns) DIV_ROUND_UP(ns, 1000L)
644 /* convert nanoseconds to microseconds, rounding up */
645
646 /*
647 * Full/low speed bandwidth allocation constants/support.
648 */
649 #define BW_HOST_DELAY 1000L /* nanoseconds */
650 #define BW_HUB_LS_SETUP 333L /* nanoseconds */
651 /* 4 full-speed bit times (est.) */
652
653 #define FRAME_TIME_BITS 12000L /* frame = 1 millisecond */
654 #define FRAME_TIME_MAX_BITS_ALLOC (90L * FRAME_TIME_BITS / 100L)
655 #define FRAME_TIME_MAX_USECS_ALLOC (90L * FRAME_TIME_USECS / 100L)
656
657 /*
658 * Ceiling [nano/micro]seconds (typical) for that many bytes at high speed
659 * ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed
660 * to preallocate bandwidth)
661 */
662 #define USB2_HOST_DELAY 5 /* nsec, guess */
663 #define HS_NSECS(bytes) (((55 * 8 * 2083) \
664 + (2083UL * (3 + BitTime(bytes))))/1000 \
665 + USB2_HOST_DELAY)
666 #define HS_NSECS_ISO(bytes) (((38 * 8 * 2083) \
667 + (2083UL * (3 + BitTime(bytes))))/1000 \
668 + USB2_HOST_DELAY)
669 #define HS_USECS(bytes) NS_TO_US(HS_NSECS(bytes))
670 #define HS_USECS_ISO(bytes) NS_TO_US(HS_NSECS_ISO(bytes))
671
672 extern long usb_calc_bus_time(int speed, int is_input,
673 int isoc, int bytecount);
674
675 /*-------------------------------------------------------------------------*/
676
677 extern void usb_set_device_state(struct usb_device *udev,
678 enum usb_device_state new_state);
679
680 /*-------------------------------------------------------------------------*/
681
682 /* exported only within usbcore */
683
684 extern struct idr usb_bus_idr;
685 extern struct mutex usb_bus_idr_lock;
686 extern wait_queue_head_t usb_kill_urb_queue;
687
688
689 #define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN))
690
691 #ifdef CONFIG_PM
692 extern unsigned usb_wakeup_enabled_descendants(struct usb_device *udev);
693 extern void usb_root_hub_lost_power(struct usb_device *rhdev);
694 extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg);
695 extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg);
696 extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd);
697 #else
usb_wakeup_enabled_descendants(struct usb_device * udev)698 static inline unsigned usb_wakeup_enabled_descendants(struct usb_device *udev)
699 {
700 return 0;
701 }
usb_hcd_resume_root_hub(struct usb_hcd * hcd)702 static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
703 {
704 return;
705 }
706 #endif /* CONFIG_PM */
707
708 /*-------------------------------------------------------------------------*/
709
710 #if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
711
712 struct usb_mon_operations {
713 void (*urb_submit)(struct usb_bus *bus, struct urb *urb);
714 void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err);
715 void (*urb_complete)(struct usb_bus *bus, struct urb *urb, int status);
716 /* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */
717 };
718
719 extern const struct usb_mon_operations *mon_ops;
720
usbmon_urb_submit(struct usb_bus * bus,struct urb * urb)721 static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb)
722 {
723 if (bus->monitored)
724 (*mon_ops->urb_submit)(bus, urb);
725 }
726
usbmon_urb_submit_error(struct usb_bus * bus,struct urb * urb,int error)727 static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
728 int error)
729 {
730 if (bus->monitored)
731 (*mon_ops->urb_submit_error)(bus, urb, error);
732 }
733
usbmon_urb_complete(struct usb_bus * bus,struct urb * urb,int status)734 static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
735 int status)
736 {
737 if (bus->monitored)
738 (*mon_ops->urb_complete)(bus, urb, status);
739 }
740
741 int usb_mon_register(const struct usb_mon_operations *ops);
742 void usb_mon_deregister(void);
743
744 #else
745
usbmon_urb_submit(struct usb_bus * bus,struct urb * urb)746 static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {}
usbmon_urb_submit_error(struct usb_bus * bus,struct urb * urb,int error)747 static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
748 int error) {}
usbmon_urb_complete(struct usb_bus * bus,struct urb * urb,int status)749 static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
750 int status) {}
751
752 #endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */
753
754 /*-------------------------------------------------------------------------*/
755
756 /* random stuff */
757
758 /* This rwsem is for use only by the hub driver and ehci-hcd.
759 * Nobody else should touch it.
760 */
761 extern struct rw_semaphore ehci_cf_port_reset_rwsem;
762
763 /* Keep track of which host controller drivers are loaded */
764 #define USB_UHCI_LOADED 0
765 #define USB_OHCI_LOADED 1
766 #define USB_EHCI_LOADED 2
767 extern unsigned long usb_hcds_loaded;
768
769 #endif /* __KERNEL__ */
770
771 #endif /* __USB_CORE_HCD_H */
772