1# SPDX-License-Identifier: GPL-2.0 2# 3# USB Host Controller Drivers 4# 5comment "USB Host Controller Drivers" 6 7config USB_C67X00_HCD 8 tristate "Cypress C67x00 HCD support" 9 depends on HAS_IOMEM 10 help 11 The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role 12 host/peripheral/OTG USB controllers. 13 14 Enable this option to support this chip in host controller mode. 15 If unsure, say N. 16 17 To compile this driver as a module, choose M here: the 18 module will be called c67x00. 19 20config USB_XHCI_HCD 21 tristate "xHCI HCD (USB 3.0) support" 22 depends on HAS_DMA && HAS_IOMEM 23 help 24 The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0 25 "SuperSpeed" host controller hardware. 26 27 To compile this driver as a module, choose M here: the 28 module will be called xhci-hcd. 29 30if USB_XHCI_HCD 31config USB_XHCI_DBGCAP 32 bool "xHCI support for debug capability" 33 depends on TTY 34 help 35 Say 'Y' to enable the support for the xHCI debug capability. Make 36 sure that your xHCI host supports the extended debug capability and 37 you want a TTY serial device based on the xHCI debug capability 38 before enabling this option. If unsure, say 'N'. 39 40config USB_XHCI_PCI 41 tristate 42 depends on USB_PCI 43 default y 44 45config USB_XHCI_PCI_RENESAS 46 tristate "Support for additional Renesas xHCI controller with firmware" 47 depends on USB_XHCI_PCI 48 help 49 Say 'Y' to enable the support for the Renesas xHCI controller with 50 firmware. Make sure you have the firmware for the device and 51 installed on your system for this device to work. 52 If unsure, say 'N'. 53 54config USB_XHCI_PLATFORM 55 tristate "Generic xHCI driver for a platform device" 56 help 57 Adds an xHCI host driver for a generic platform device, which 58 provides a memory space and an irq. 59 It is also a prerequisite for platform specific drivers that 60 implement some extra quirks. 61 62 If unsure, say N. 63 64config USB_XHCI_HISTB 65 tristate "xHCI support for HiSilicon STB SoCs" 66 depends on USB_XHCI_PLATFORM && (ARCH_HISI || COMPILE_TEST) 67 help 68 Say 'Y' to enable the support for the xHCI host controller 69 found in HiSilicon STB SoCs. 70 71config USB_XHCI_MTK 72 tristate "xHCI support for MediaTek SoCs" 73 select MFD_SYSCON 74 depends on (MIPS && SOC_MT7621) || ARCH_MEDIATEK || COMPILE_TEST 75 help 76 Say 'Y' to enable the support for the xHCI host controller 77 found in MediaTek SoCs. 78 If unsure, say N. 79 80config USB_XHCI_MVEBU 81 tristate "xHCI support for Marvell Armada 375/38x/37xx" 82 select USB_XHCI_PLATFORM 83 depends on HAS_IOMEM 84 depends on ARCH_MVEBU || COMPILE_TEST 85 help 86 Say 'Y' to enable the support for the xHCI host controller 87 found in Marvell Armada 375/38x/37xx ARM SOCs. 88 89config USB_XHCI_RCAR 90 tristate "xHCI support for Renesas R-Car SoCs" 91 depends on USB_XHCI_PLATFORM 92 depends on ARCH_RENESAS || COMPILE_TEST 93 default ARCH_RENESAS 94 help 95 Say 'Y' to enable the support for the xHCI host controller 96 found in Renesas R-Car ARM SoCs. 97 98config USB_XHCI_RZV2M 99 bool "xHCI support for Renesas RZ/V2M SoC" 100 depends on USB_XHCI_RCAR 101 depends on ARCH_R9A09G011 || COMPILE_TEST 102 depends on USB_RZV2M_USB3DRD=y || (USB_RZV2M_USB3DRD=USB_XHCI_RCAR) 103 help 104 Say 'Y' to enable the support for the xHCI host controller 105 found in Renesas RZ/V2M SoC. 106 107config USB_XHCI_TEGRA 108 tristate "xHCI support for NVIDIA Tegra SoCs" 109 depends on PHY_TEGRA_XUSB 110 depends on RESET_CONTROLLER 111 select FW_LOADER 112 help 113 Say 'Y' to enable the support for the xHCI host controller 114 found in NVIDIA Tegra124 and later SoCs. 115 116endif # USB_XHCI_HCD 117 118config USB_EHCI_BRCMSTB 119 tristate 120 121config USB_BRCMSTB 122 tristate "Broadcom STB USB support" 123 depends on (ARCH_BRCMSTB && PHY_BRCM_USB) || COMPILE_TEST 124 select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD 125 select USB_EHCI_BRCMSTB if USB_EHCI_HCD 126 select USB_XHCI_PLATFORM if USB_XHCI_HCD 127 help 128 Enables support for XHCI, EHCI and OHCI host controllers 129 found in Broadcom STB SoC's. 130 131 To compile these drivers as modules, choose M here: the 132 modules will be called ohci-platform.ko, ehci-brcm.ko and 133 xhci-plat-hcd.ko 134 135 Disabling this will keep the controllers and corresponding 136 PHYs powered down. 137 138config USB_EHCI_HCD 139 tristate "EHCI HCD (USB 2.0) support" 140 depends on HAS_DMA && HAS_IOMEM 141 help 142 The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 143 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. 144 If your USB host controller supports USB 2.0, you will likely want to 145 configure this Host Controller Driver. 146 147 EHCI controllers are packaged with "companion" host controllers (OHCI 148 or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports 149 will connect to EHCI if the device is high speed, otherwise they 150 connect to a companion controller. If you configure EHCI, you should 151 probably configure the OHCI (for NEC and some other vendors) USB Host 152 Controller Driver or UHCI (for Via motherboards) Host Controller 153 Driver too. 154 155 You may want to read <file:Documentation/usb/ehci.rst>. 156 157 To compile this driver as a module, choose M here: the 158 module will be called ehci-hcd. 159 160config USB_EHCI_ROOT_HUB_TT 161 bool "Root Hub Transaction Translators" 162 depends on USB_EHCI_HCD 163 help 164 Some EHCI chips have vendor-specific extensions to integrate 165 transaction translators, so that no OHCI or UHCI companion 166 controller is needed. It's safe to say "y" even if your 167 controller doesn't support this feature. 168 169 This supports the EHCI implementation that's originally 170 from ARC, and has since changed hands a few times. 171 172config USB_EHCI_TT_NEWSCHED 173 bool "Improved Transaction Translator scheduling" 174 depends on USB_EHCI_HCD 175 default y 176 help 177 This changes the periodic scheduling code to fill more of the low 178 and full speed bandwidth available from the Transaction Translator 179 (TT) in USB 2.0 hubs. Without this, only one transfer will be 180 issued in each microframe, significantly reducing the number of 181 periodic low/fullspeed transfers possible. 182 183 If you have multiple periodic low/fullspeed devices connected to a 184 highspeed USB hub which is connected to a highspeed USB Host 185 Controller, and some of those devices will not work correctly 186 (possibly due to "ENOSPC" or "-28" errors), say Y. Conversely, if 187 you have only one such device and it doesn't work, you could try 188 saying N. 189 190 If unsure, say Y. 191 192if USB_EHCI_HCD 193 194config USB_EHCI_PCI 195 tristate 196 depends on USB_PCI 197 default y 198 199config XPS_USB_HCD_XILINX 200 bool "Use Xilinx usb host EHCI controller core" 201 depends on (PPC32 || MICROBLAZE) 202 select USB_EHCI_BIG_ENDIAN_DESC 203 select USB_EHCI_BIG_ENDIAN_MMIO 204 help 205 Xilinx xps USB host controller core is EHCI compliant and has 206 transaction translator built-in. It can be configured to either 207 support both high speed and full speed devices, or high speed 208 devices only. 209 210config USB_EHCI_FSL 211 tristate "Support for Freescale on-chip EHCI USB controller" 212 select USB_EHCI_ROOT_HUB_TT 213 help 214 Variation of ARC USB block used in some Freescale chips. 215 216config USB_EHCI_HCD_NPCM7XX 217 tristate "Support for Nuvoton NPCM on-chip EHCI USB controller" 218 depends on (USB_EHCI_HCD && ARCH_NPCM) || COMPILE_TEST 219 default y if (USB_EHCI_HCD && ARCH_NPCM) 220 help 221 Enables support for the on-chip EHCI controller on 222 Nuvoton NPCM chips. 223 224config USB_EHCI_HCD_OMAP 225 tristate "EHCI support for OMAP3 and later chips" 226 depends on ARCH_OMAP || COMPILE_TEST 227 depends on NOP_USB_XCEIV 228 default y 229 help 230 Enables support for the on-chip EHCI controller on 231 OMAP3 and later chips. 232 233config USB_EHCI_HCD_ORION 234 tristate "Support for Marvell EBU on-chip EHCI USB controller" 235 depends on USB_EHCI_HCD && (PLAT_ORION || ARCH_MVEBU || COMPILE_TEST) 236 default y if (PLAT_ORION || ARCH_MVEBU) 237 help 238 Enables support for the on-chip EHCI controller on Marvell's 239 embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP, 240 Armada 370. This is different from the EHCI implementation 241 on Marvell's mobile PXA and MMP SoC, see "EHCI support for 242 Marvell PXA/MMP USB controller" for those. 243 244config USB_EHCI_HCD_SPEAR 245 tristate "Support for ST SPEAr on-chip EHCI USB controller" 246 depends on USB_EHCI_HCD && (PLAT_SPEAR || COMPILE_TEST) 247 default y if PLAT_SPEAR 248 help 249 Enables support for the on-chip EHCI controller on 250 ST SPEAr chips. 251 252config USB_EHCI_HCD_STI 253 tristate "Support for ST STiHxxx on-chip EHCI USB controller" 254 depends on (ARCH_STI || COMPILE_TEST) && OF 255 select GENERIC_PHY 256 select USB_EHCI_HCD_PLATFORM 257 help 258 Enable support for the on-chip EHCI controller found on 259 STMicroelectronics consumer electronics SoC's. 260 261config USB_EHCI_HCD_AT91 262 tristate "Support for Atmel on-chip EHCI USB controller" 263 depends on USB_EHCI_HCD && (ARCH_AT91 || COMPILE_TEST) 264 default y if ARCH_AT91 265 help 266 Enables support for the on-chip EHCI controller on 267 Atmel chips. 268 269config USB_EHCI_TEGRA 270 tristate "NVIDIA Tegra HCD support" 271 depends on ARCH_TEGRA 272 select USB_CHIPIDEA 273 select USB_CHIPIDEA_HOST 274 select USB_CHIPIDEA_TEGRA 275 select USB_GADGET 276 help 277 This option is deprecated now and the driver was removed, use 278 USB_CHIPIDEA_TEGRA instead. 279 280 Enable support for the internal USB Host Controllers 281 found in NVIDIA Tegra SoCs. The controllers are EHCI compliant. 282 283config USB_EHCI_HCD_PPC_OF 284 bool "EHCI support for PPC USB controller on OF platform bus" 285 depends on PPC 286 default y 287 help 288 Enables support for the USB controller present on the PowerPC 289 OpenFirmware platform bus. 290 291config USB_EHCI_SH 292 bool "EHCI support for SuperH USB controller" 293 depends on SUPERH || COMPILE_TEST 294 help 295 Enables support for the on-chip EHCI controller on the SuperH. 296 If you use the PCI EHCI controller, this option is not necessary. 297 298config USB_EHCI_EXYNOS 299 tristate "EHCI support for Samsung S5P/Exynos SoC Series" 300 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST 301 help 302 Enable support for the Samsung S5Pv210 and Exynos SOC's on-chip EHCI 303 controller. 304 305config USB_EHCI_MV 306 tristate "EHCI support for Marvell PXA/MMP USB controller" 307 depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST 308 select USB_EHCI_ROOT_HUB_TT 309 help 310 Enables support for Marvell (including PXA and MMP series) on-chip 311 USB SPH and OTG controller. SPH is a single port host, and it can 312 only be EHCI host. OTG is controller that can switch to host mode. 313 Note that this driver will not work on Marvell's other EHCI 314 controller used by the EBU-type SoCs including Orion, Kirkwood, 315 Dova, Armada 370 and Armada XP. See "Support for Marvell EBU 316 on-chip EHCI USB controller" for those. 317 318config USB_OCTEON_HCD 319 tristate "Cavium Networks Octeon USB support" 320 depends on CAVIUM_OCTEON_SOC && USB 321 help 322 This driver supports USB host controller on some Cavium 323 Networks' products in the Octeon family. 324 325 To compile this driver as a module, choose M here. The module 326 will be called octeon-hcd. 327 328config USB_EHCI_HCD_PLATFORM 329 tristate "Generic EHCI driver for a platform device" 330 help 331 Adds an EHCI host driver for a generic platform device, which 332 provides a memory space and an irq. 333 334 If unsure, say N. 335 336config USB_OCTEON_EHCI 337 bool "Octeon on-chip EHCI support (DEPRECATED)" 338 depends on CAVIUM_OCTEON_SOC 339 select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN 340 select USB_EHCI_HCD_PLATFORM 341 help 342 This option is deprecated now and the driver was removed, use 343 USB_EHCI_HCD_PLATFORM instead. 344 345 Enable support for the Octeon II SOC's on-chip EHCI 346 controller. It is needed for high-speed (480Mbit/sec) 347 USB 2.0 device support. All CN6XXX based chips with USB are 348 supported. 349 350endif # USB_EHCI_HCD 351 352config USB_OXU210HP_HCD 353 tristate "OXU210HP HCD support" 354 depends on HAS_IOMEM 355 help 356 The OXU210HP is an USB host/OTG/device controller. Enable this 357 option if your board has this chip. If unsure, say N. 358 359 This driver does not support isochronous transfers and doesn't 360 implement OTG nor USB device controllers. 361 362 To compile this driver as a module, choose M here: the 363 module will be called oxu210hp-hcd. 364 365config USB_ISP116X_HCD 366 tristate "ISP116X HCD support" 367 depends on HAS_IOMEM 368 help 369 The ISP1160 and ISP1161 chips are USB host controllers. Enable this 370 option if your board has this chip. If unsure, say N. 371 372 This driver does not support isochronous transfers. 373 374 To compile this driver as a module, choose M here: the 375 module will be called isp116x-hcd. 376 377config USB_ISP1362_HCD 378 tristate "ISP1362 HCD support" 379 depends on HAS_IOPORT 380 depends on COMPILE_TEST # nothing uses this 381 help 382 Supports the Philips ISP1362 chip as a host controller 383 384 This driver does not support isochronous transfers. 385 386 To compile this driver as a module, choose M here: the 387 module will be called isp1362-hcd. 388 389config USB_MAX3421_HCD 390 tristate "MAX3421 HCD (USB-over-SPI) support" 391 depends on USB && SPI 392 help 393 The Maxim MAX3421E chip supports standard USB 2.0-compliant 394 full-speed devices either in host or peripheral mode. This 395 driver supports the host-mode of the MAX3421E only. 396 397 To compile this driver as a module, choose M here: the module will 398 be called max3421-hcd. 399 400config USB_OHCI_HCD 401 tristate "OHCI HCD (USB 1.1) support" 402 depends on HAS_DMA && HAS_IOMEM 403 help 404 The Open Host Controller Interface (OHCI) is a standard for accessing 405 USB 1.1 host controller hardware. It does more in hardware than Intel's 406 UHCI specification. If your USB host controller follows the OHCI spec, 407 say Y. On most non-x86 systems, and on x86 hardware that's not using a 408 USB controller from Intel or VIA, this is appropriate. If your host 409 controller doesn't use PCI, this is probably appropriate. For a PCI 410 based system where you're not sure, the "lspci -v" entry will list the 411 right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI. 412 413 To compile this driver as a module, choose M here: the 414 module will be called ohci-hcd. 415 416if USB_OHCI_HCD 417 418config USB_OHCI_HCD_OMAP1 419 tristate "OHCI support for OMAP1/2 chips" 420 depends on ARCH_OMAP1 421 default y 422 help 423 Enables support for the OHCI controller on OMAP1/2 chips. 424 425config USB_OHCI_HCD_SPEAR 426 tristate "Support for ST SPEAr on-chip OHCI USB controller" 427 depends on USB_OHCI_HCD && (PLAT_SPEAR || COMPILE_TEST) 428 default y if PLAT_SPEAR 429 help 430 Enables support for the on-chip OHCI controller on 431 ST SPEAr chips. 432 433config USB_OHCI_HCD_STI 434 tristate "Support for ST STiHxxx on-chip OHCI USB controller" 435 depends on (ARCH_STI || COMPILE_TEST) && OF 436 select GENERIC_PHY 437 select USB_OHCI_HCD_PLATFORM 438 help 439 Enable support for the on-chip OHCI controller found on 440 STMicroelectronics consumer electronics SoC's. 441 442config USB_OHCI_HCD_S3C2410 443 tristate "OHCI support for Samsung S3C64xx SoC series" 444 depends on USB_OHCI_HCD && (ARCH_S3C64XX || COMPILE_TEST) 445 default ARCH_S3C64XX 446 help 447 Enables support for the on-chip OHCI controller on 448 S3C64xx chips. 449 450config USB_OHCI_HCD_LPC32XX 451 tristate "Support for LPC on-chip OHCI USB controller" 452 depends on USB_OHCI_HCD 453 depends on ARCH_LPC32XX || COMPILE_TEST 454 depends on USB_ISP1301 455 default y 456 help 457 Enables support for the on-chip OHCI controller on 458 NXP chips. 459 460config USB_OHCI_HCD_PXA27X 461 tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller" 462 depends on USB_OHCI_HCD && (PXA27x || PXA3xx) 463 default y 464 help 465 Enables support for the on-chip OHCI controller on 466 PXA27x/PXA3xx chips. 467 468config USB_OHCI_HCD_AT91 469 tristate "Support for Atmel on-chip OHCI USB controller" 470 depends on USB_OHCI_HCD && (ARCH_AT91 || COMPILE_TEST) && OF 471 default y if ARCH_AT91 472 help 473 Enables support for the on-chip OHCI controller on 474 Atmel chips. 475 476config USB_OHCI_HCD_OMAP3 477 tristate "OHCI support for OMAP3 and later chips" 478 depends on ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST 479 select USB_OHCI_HCD_PLATFORM 480 default y if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 481 help 482 This option is deprecated now and the driver was removed, use 483 USB_OHCI_HCD_PLATFORM instead. 484 485 Enables support for the on-chip OHCI controller on 486 OMAP3 and later chips. 487 488config USB_OHCI_HCD_DAVINCI 489 tristate "OHCI support for TI DaVinci DA8xx" 490 depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST 491 depends on USB_OHCI_HCD 492 select PHY_DA8XX_USB 493 default y if ARCH_DAVINCI_DA8XX 494 help 495 Enables support for the DaVinci DA8xx integrated OHCI 496 controller. This driver cannot currently be a loadable 497 module because it lacks a proper PHY abstraction. 498 499config USB_OHCI_HCD_PPC_OF_BE 500 bool "OHCI support for OF platform bus (big endian)" 501 depends on PPC 502 select USB_OHCI_BIG_ENDIAN_DESC 503 select USB_OHCI_BIG_ENDIAN_MMIO 504 help 505 Enables support for big-endian USB controllers present on the 506 OpenFirmware platform bus. 507 508config USB_OHCI_HCD_PPC_OF_LE 509 bool "OHCI support for OF platform bus (little endian)" 510 depends on PPC 511 select USB_OHCI_LITTLE_ENDIAN 512 help 513 Enables support for little-endian USB controllers present on the 514 OpenFirmware platform bus. 515 516config USB_OHCI_HCD_PPC_OF 517 bool 518 depends on PPC 519 default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE 520 521config USB_OHCI_HCD_PCI 522 tristate "OHCI support for PCI-bus USB controllers" 523 depends on USB_PCI 524 default y 525 select USB_OHCI_LITTLE_ENDIAN 526 help 527 Enables support for PCI-bus plug-in USB controller cards. 528 If unsure, say Y. 529 530config USB_OHCI_HCD_SSB 531 bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)" 532 depends on (SSB = y || SSB = USB_OHCI_HCD) 533 select USB_HCD_SSB 534 select USB_OHCI_HCD_PLATFORM 535 help 536 This option is deprecated now and the driver was removed, use 537 USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead. 538 539 Support for the Sonics Silicon Backplane (SSB) attached 540 Broadcom USB OHCI core. 541 542 This device is present in some embedded devices with 543 Broadcom based SSB bus. 544 545 If unsure, say N. 546 547config USB_OHCI_EXYNOS 548 tristate "OHCI support for Samsung S5P/Exynos SoC Series" 549 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST 550 help 551 Enable support for the Samsung S5Pv210 and Exynos SOC's on-chip OHCI 552 controller. 553 554config USB_OHCI_HCD_PLATFORM 555 tristate "Generic OHCI driver for a platform device" 556 help 557 Adds an OHCI host driver for a generic platform device, which 558 provides a memory space and an irq. 559 560 If unsure, say N. 561 562config USB_OCTEON_OHCI 563 bool "Octeon on-chip OHCI support (DEPRECATED)" 564 depends on CAVIUM_OCTEON_SOC 565 default USB_OCTEON_EHCI 566 select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN 567 select USB_OHCI_LITTLE_ENDIAN 568 select USB_OHCI_HCD_PLATFORM 569 help 570 This option is deprecated now and the driver was removed, use 571 USB_OHCI_HCD_PLATFORM instead. 572 573 Enable support for the Octeon II SOC's on-chip OHCI 574 controller. It is needed for low-speed USB 1.0 device 575 support. All CN6XXX based chips with USB are supported. 576 577endif # USB_OHCI_HCD 578 579config USB_UHCI_HCD 580 tristate "UHCI HCD (most Intel and VIA) support" 581 depends on (USB_PCI && HAS_IOPORT) || USB_UHCI_SUPPORT_NON_PCI_HC 582 help 583 The Universal Host Controller Interface is a standard by Intel for 584 accessing the USB hardware in the PC (which is also called the USB 585 host controller). If your USB host controller conforms to this 586 standard, you may want to say Y, but see below. All recent boards 587 with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX, 588 i810, i820) conform to this standard. Also all VIA PCI chipsets 589 (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro 590 133) and LEON/GRLIB SoCs with the GRUSBHC controller. 591 If unsure, say Y. 592 593 To compile this driver as a module, choose M here: the 594 module will be called uhci-hcd. 595 596config USB_UHCI_SUPPORT_NON_PCI_HC 597 bool 598 default y if (SPARC_LEON || USB_UHCI_PLATFORM) 599 600config USB_UHCI_PLATFORM 601 bool 602 default y if (ARCH_VT8500 || ARCH_ASPEED) 603 604config USB_UHCI_ASPEED 605 bool 606 default y if ARCH_ASPEED 607 608config USB_FHCI_HCD 609 tristate "Freescale QE USB Host Controller support" 610 depends on OF_GPIO && QE_GPIO && QUICC_ENGINE 611 select FSL_GTM 612 select QE_USB 613 help 614 This driver enables support for Freescale QE USB Host Controller 615 (as found on MPC8360 and MPC8323 processors), the driver supports 616 Full and Low Speed USB. 617 618config FHCI_DEBUG 619 bool "Freescale QE USB Host Controller debug support" 620 depends on USB_FHCI_HCD && DEBUG_FS 621 help 622 Say "y" to see some FHCI debug information and statistics 623 through debugfs. 624 625config USB_SL811_HCD 626 tristate "SL811HS HCD support" 627 depends on HAS_IOMEM 628 help 629 The SL811HS is a single-port USB controller that supports either 630 host side or peripheral side roles. Enable this option if your 631 board has this chip, and you want to use it as a host controller. 632 If unsure, say N. 633 634 To compile this driver as a module, choose M here: the 635 module will be called sl811-hcd. 636 637config USB_SL811_HCD_ISO 638 bool "partial ISO support" 639 depends on USB_SL811_HCD 640 help 641 The driver doesn't support iso_frame_desc (yet), but for some simple 642 devices that just queue one ISO frame per URB, then ISO transfers 643 "should" work using the normal urb status fields. 644 645 If unsure, say N. 646 647config USB_SL811_CS 648 tristate "CF/PCMCIA support for SL811HS HCD" 649 depends on USB_SL811_HCD && PCMCIA 650 help 651 Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC 652 REX-CFU1U CF card (often used with PDAs). If unsure, say N. 653 654 To compile this driver as a module, choose M here: the 655 module will be called "sl811_cs". 656 657config USB_R8A66597_HCD 658 tristate "R8A66597 HCD support" 659 depends on HAS_IOMEM 660 help 661 The R8A66597 is a USB 2.0 host and peripheral controller. 662 663 Enable this option if your board has this chip, and you want 664 to use it as a host controller. If unsure, say N. 665 666 To compile this driver as a module, choose M here: the 667 module will be called r8a66597-hcd. 668 669config USB_RENESAS_USBHS_HCD 670 tristate "Renesas USBHS HCD support" 671 depends on USB_RENESAS_USBHS 672 help 673 The Renesas USBHS is a USB 2.0 host and peripheral controller. 674 675 Enable this option if your board has this chip, and you want 676 to use it as a host controller. If unsure, say N. 677 678 To compile this driver as a module, choose M here: the 679 module will be called renesas-usbhs. 680 681config USB_HCD_BCMA 682 tristate "BCMA usb host driver" 683 depends on BCMA 684 select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD 685 select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD 686 help 687 Enable support for the EHCI and OCHI host controller on an bcma bus. 688 It converts the bcma driver into two platform device drivers 689 for ehci and ohci. 690 691 If unsure, say N. 692 693config USB_HCD_SSB 694 tristate "SSB usb host driver" 695 depends on SSB 696 select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD 697 select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD 698 help 699 Enable support for the EHCI and OCHI host controller on an bcma bus. 700 It converts the bcma driver into two platform device drivers 701 for ehci and ohci. 702 703 If unsure, say N. 704 705config USB_HCD_TEST_MODE 706 bool "HCD test mode support" 707 help 708 Say 'Y' to enable additional software test modes that may be 709 supported by the host controller drivers. 710 711 One such test mode is the Embedded High-speed Host Electrical Test 712 (EHSET) for EHCI host controller hardware, specifically the "Single 713 Step Set Feature" test. Typically this will be enabled for On-the-Go 714 or embedded hosts that need to undergo USB-IF compliance testing with 715 the aid of special testing hardware. In the future, this may expand 716 to include other tests that require support from a HCD driver. 717 718 This option is of interest only to developers who need to validate 719 their USB hardware designs. It is not needed for normal use. If 720 unsure, say N. 721 722config USB_XEN_HCD 723 tristate "Xen usb virtual host driver" 724 depends on XEN 725 select XEN_XENBUS_FRONTEND 726 help 727 The Xen usb virtual host driver serves as a frontend driver enabling 728 a Xen guest system to access USB Devices passed through to the guest 729 by the Xen host (usually Dom0). 730 Only needed if the kernel is running in a Xen guest and generic 731 access to a USB device is needed. 732