xref: /linux/drivers/net/ethernet/8390/Kconfig (revision 621cde16e49b3ecf7d59a8106a20aaebfb4a59a9)
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# 8390 device configuration
4#
5
6config NET_VENDOR_8390
7	bool "National Semiconductor 8390 devices"
8	default y
9	depends on NET_VENDOR_NATSEMI
10	help
11	  If you have a network (Ethernet) card belonging to this class, say Y.
12
13	  Note that the answer to this question doesn't directly affect the
14	  kernel: saying N will just cause the configurator to skip all
15	  the questions about National Semiconductor 8390 cards. If you say Y,
16	  you will be asked for your specific card in the following questions.
17
18if NET_VENDOR_8390
19
20config PCMCIA_AXNET
21	tristate "Asix AX88190 PCMCIA support"
22	depends on PCMCIA && HAS_IOPORT
23	help
24	  Say Y here if you intend to attach an Asix AX88190-based PCMCIA
25	  (PC-card) Fast Ethernet card to your computer.  These cards are
26	  nearly NE2000 compatible but need a separate driver due to a few
27	  misfeatures.
28
29	  To compile this driver as a module, choose M here: the module will be
30	  called axnet_cs.  If unsure, say N.
31
32config AX88796
33	tristate "ASIX AX88796 NE2000 clone support" if !ZORRO
34	depends on (ARM || MIPS || SUPERH || ZORRO || COMPILE_TEST)
35	select CRC32
36	select PHYLIB
37	select MDIO_BITBANG
38	help
39	  AX88796 driver, using platform bus to provide
40	  chip detection and resources
41
42config AX88796_93CX6
43	bool "ASIX AX88796 external 93CX6 eeprom support"
44	depends on AX88796
45	select EEPROM_93CX6
46	help
47	  Select this if your platform comes with an external 93CX6 eeprom.
48
49config XSURF100
50	tristate "Amiga XSurf 100 AX88796/NE2000 clone support"
51	depends on ZORRO
52	select AX88796
53	select AX88796B_PHY
54	help
55	  This driver is for the Individual Computers X-Surf 100 Ethernet
56	  card (based on the Asix AX88796 chip). If you have such a card,
57	  say Y. Otherwise, say N.
58
59	  To compile this driver as a module, choose M here: the module
60	  will be called xsurf100.
61
62config HYDRA
63	tristate "Hydra support"
64	depends on ZORRO
65	select CRC32
66	help
67	  If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
68
69	  To compile this driver as a module, choose M here: the module
70	  will be called hydra.
71
72config ARM_ETHERH
73	tristate "I-cubed EtherH/ANT EtherM support"
74	depends on ARM && ARCH_ACORN
75	select CRC32
76	help
77	  If you have an Acorn system with one of these network cards, you
78	  should say Y to this option if you wish to use it with Linux.
79
80config MAC8390
81	tristate "Macintosh NS 8390 based ethernet cards"
82	depends on MAC
83	select CRC32
84	help
85	  If you want to include a driver to support Nubus or LC-PDS
86	  Ethernet cards using an NS8390 chipset or its equivalent, say Y.
87
88config MCF8390
89	tristate "ColdFire NS8390 based Ethernet support"
90	depends on COLDFIRE
91	select CRC32
92	help
93	  This driver is for Ethernet devices using an NS8390-compatible
94	  chipset on many common ColdFire CPU based boards. Many of the older
95	  Freescale dev boards use this, and some other common boards like
96	  some SnapGear routers do as well.
97
98	  If you have one of these boards and want to use the network interface
99	  on them then choose Y. To compile this driver as a module, choose M
100	  here, the module will be called mcf8390.
101
102config NE2000
103	tristate "NE2000/NE1000 support"
104	depends on (ISA || (Q40 && m) || MACH_TX49XX || ATARI_ETHERNEC)
105	select NETDEV_LEGACY_INIT if ISA
106	select CRC32
107	help
108	  If you have a network (Ethernet) card of this type, say Y here.
109	  Many Ethernet cards without a specific driver are compatible with
110	  the NE2000.
111
112	  If you have a PCI NE2000 card however, say N here and Y to "PCI
113	  NE2000 and clone support" below.
114
115	  To compile this driver as a module, choose M here. The module
116	  will be called ne.
117
118config NE2K_PCI
119	tristate "PCI NE2000 and clones support (see help)"
120	depends on PCI && HAS_IOPORT
121	select CRC32
122	help
123	  This driver is for NE2000 compatible PCI cards. It will not work
124	  with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
125	  support" below). If you have a PCI NE2000 network (Ethernet) card,
126	  say Y here.
127
128	  This driver also works for the following NE2000 clone cards:
129	  RealTek RTL-8029  Winbond 89C940  Compex RL2000  KTI ET32P2
130	  NetVin NV5000SC   Via 86C926      SureCom NE34   Winbond
131	  Holtek HT80232    Holtek HT80229
132
133	  To compile this driver as a module, choose M here. The module
134	  will be called ne2k-pci.
135
136config APNE
137	tristate "PCMCIA NE2000 support"
138	depends on AMIGA_PCMCIA
139	select CRC32
140	help
141	  If you have a PCMCIA NE2000 compatible adapter, say Y.  Otherwise,
142	  say N.
143
144	  To compile this driver as a module, choose M here: the module
145	  will be called apne.
146
147config PCMCIA_PCNET
148	tristate "NE2000 compatible PCMCIA support"
149	depends on PCMCIA && HAS_IOPORT
150	select CRC32
151	help
152	  Say Y here if you intend to attach an NE2000 compatible PCMCIA
153	  (PC-card) Ethernet or Fast Ethernet card to your computer.
154
155	  To compile this driver as a module, choose M here: the module will be
156	  called pcnet_cs.  If unsure, say N.
157
158config STNIC
159	tristate "National DP83902AV  support"
160	depends on SUPERH
161	select CRC32
162	help
163	  Support for cards based on the National Semiconductor DP83902AV
164	  ST-NIC Serial Network Interface Controller for Twisted Pair.  This
165	  is a 10Mbit/sec Ethernet controller.  Product overview and specs at
166	  <http://www.national.com/pf/DP/DP83902A.html>.
167
168	  If unsure, say N.
169
170config ULTRA
171	tristate "SMC Ultra support"
172	depends on ISA
173	select NETDEV_LEGACY_INIT
174	select CRC32
175	help
176	  If you have a network (Ethernet) card of this type, say Y here.
177
178	  Important: There have been many reports that, with some motherboards
179	  mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
180	  such as some BusLogic models) causes corruption problems with many
181	  operating systems. The Linux smc-ultra driver has a work-around for
182	  this but keep it in mind if you have such a SCSI card and have
183	  problems.
184
185	  To compile this driver as a module, choose M here. The module
186	  will be called smc-ultra.
187
188config WD80x3
189	tristate "WD80*3 support"
190	depends on ISA
191	select NETDEV_LEGACY_INIT
192	select CRC32
193	help
194	  If you have a network (Ethernet) card of this type, say Y here.
195
196	  To compile this driver as a module, choose M here. The module
197	  will be called wd.
198
199config ZORRO8390
200	tristate "Zorro NS8390-based Ethernet support"
201	depends on ZORRO
202	select CRC32
203	help
204	  This driver is for Zorro Ethernet cards using an NS8390-compatible
205	  chipset, like the Village Tronic Ariadne II and the Individual
206	  Computers X-Surf Ethernet cards. If you have such a card, say Y.
207	  Otherwise, say N.
208
209	  To compile this driver as a module, choose M here: the module
210	  will be called zorro8390.
211
212endif # NET_VENDOR_8390
213