1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Hardware monitoring chip drivers configuration 4# 5 6menuconfig HWMON 7 tristate "Hardware Monitoring support" 8 depends on HAS_IOMEM 9 default y 10 help 11 Hardware monitoring devices let you monitor the hardware health 12 of a system. Most modern motherboards include such a device. It 13 can include temperature sensors, voltage sensors, fan speed 14 sensors and various additional features such as the ability to 15 control the speed of the fans. If you want this support you 16 should say Y here and also to the specific driver(s) for your 17 sensors chip(s) below. 18 19 To find out which specific driver(s) you need, use the 20 sensors-detect script from the lm_sensors package. Read 21 <file:Documentation/hwmon/userspace-tools.rst> for details. 22 23 This support can also be built as a module. If so, the module 24 will be called hwmon. 25 26if HWMON 27 28config HWMON_VID 29 tristate 30 31config HWMON_DEBUG_CHIP 32 bool "Hardware Monitoring Chip debugging messages" 33 help 34 Say Y here if you want the I2C chip drivers to produce a bunch of 35 debug messages to the system log. Select this if you are having 36 a problem with I2C support and want to see more of what is going 37 on. 38 39comment "Native drivers" 40 41config SENSORS_ABITUGURU 42 tristate "Abit uGuru (rev 1 & 2)" 43 depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT 44 help 45 If you say yes here you get support for the sensor part of the first 46 and second revision of the Abit uGuru chip. The voltage and frequency 47 control parts of the Abit uGuru are not supported. The Abit uGuru 48 chip can be found on Abit uGuru featuring motherboards (most modern 49 Abit motherboards from before end 2005). For more info and a list 50 of which motherboards have which revision see 51 Documentation/hwmon/abituguru.rst 52 53 This driver can also be built as a module. If so, the module 54 will be called abituguru. 55 56config SENSORS_ABITUGURU3 57 tristate "Abit uGuru (rev 3)" 58 depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT 59 help 60 If you say yes here you get support for the sensor part of the 61 third revision of the Abit uGuru chip. Only reading the sensors 62 and their settings is supported. The third revision of the Abit 63 uGuru chip can be found on recent Abit motherboards (since end 64 2005). For more info and a list of which motherboards have which 65 revision see Documentation/hwmon/abituguru3.rst 66 67 This driver can also be built as a module. If so, the module 68 will be called abituguru3. 69 70config SENSORS_SMPRO 71 tristate "Ampere's Altra SMpro hardware monitoring driver" 72 depends on MFD_SMPRO 73 help 74 If you say yes here you get support for the thermal, voltage, 75 current and power sensors of Ampere's Altra processor family SoC 76 with SMpro co-processor. 77 78config SENSORS_AD7314 79 tristate "Analog Devices AD7314 and compatibles" 80 depends on SPI 81 help 82 If you say yes here you get support for the Analog Devices 83 AD7314, ADT7301 and ADT7302 temperature sensors. 84 85 This driver can also be built as a module. If so, the module 86 will be called ad7314. 87 88config SENSORS_AD7414 89 tristate "Analog Devices AD7414" 90 depends on I2C 91 help 92 If you say yes here you get support for the Analog Devices 93 AD7414 temperature monitoring chip. 94 95 This driver can also be built as a module. If so, the module 96 will be called ad7414. 97 98config SENSORS_AD7418 99 tristate "Analog Devices AD7416, AD7417 and AD7418" 100 depends on I2C 101 help 102 If you say yes here you get support for the Analog Devices 103 AD7416, AD7417 and AD7418 temperature monitoring chips. 104 105 This driver can also be built as a module. If so, the module 106 will be called ad7418. 107 108config SENSORS_ADM1025 109 tristate "Analog Devices ADM1025 and compatibles" 110 depends on I2C 111 select HWMON_VID 112 help 113 If you say yes here you get support for Analog Devices ADM1025 114 and Philips NE1619 sensor chips. 115 116 This driver can also be built as a module. If so, the module 117 will be called adm1025. 118 119config SENSORS_ADM1026 120 tristate "Analog Devices ADM1026 and compatibles" 121 depends on I2C 122 select HWMON_VID 123 help 124 If you say yes here you get support for Analog Devices ADM1026 125 sensor chip. 126 127 This driver can also be built as a module. If so, the module 128 will be called adm1026. 129 130config SENSORS_ADM1029 131 tristate "Analog Devices ADM1029" 132 depends on I2C 133 help 134 If you say yes here you get support for Analog Devices ADM1029 135 sensor chip. 136 Very rare chip, please let us know you use it. 137 138 This driver can also be built as a module. If so, the module 139 will be called adm1029. 140 141config SENSORS_ADM1031 142 tristate "Analog Devices ADM1031 and compatibles" 143 depends on I2C 144 help 145 If you say yes here you get support for Analog Devices ADM1031 146 and ADM1030 sensor chips. 147 148 This driver can also be built as a module. If so, the module 149 will be called adm1031. 150 151config SENSORS_ADM1177 152 tristate "Analog Devices ADM1177 and compatibles" 153 depends on I2C 154 help 155 If you say yes here you get support for Analog Devices ADM1177 156 sensor chips. 157 158 This driver can also be built as a module. If so, the module 159 will be called adm1177. 160 161config SENSORS_ADM9240 162 tristate "Analog Devices ADM9240 and compatibles" 163 depends on I2C 164 select HWMON_VID 165 select REGMAP_I2C 166 help 167 If you say yes here you get support for Analog Devices ADM9240, 168 Dallas DS1780, National Semiconductor LM81 sensor chips. 169 170 This driver can also be built as a module. If so, the module 171 will be called adm9240. 172 173config SENSORS_ADT7X10 174 tristate 175 select REGMAP 176 help 177 This module contains common code shared by the ADT7310/ADT7320 and 178 ADT7410/ADT7420 temperature monitoring chip drivers. 179 180 If built as a module, the module will be called adt7x10. 181 182config SENSORS_ADT7310 183 tristate "Analog Devices ADT7310/ADT7320" 184 depends on SPI_MASTER 185 select SENSORS_ADT7X10 186 help 187 If you say yes here you get support for the Analog Devices 188 ADT7310 and ADT7320 temperature monitoring chips. 189 190 This driver can also be built as a module. If so, the module 191 will be called adt7310. 192 193config SENSORS_ADT7410 194 tristate "Analog Devices ADT7410/ADT7420" 195 depends on I2C 196 select SENSORS_ADT7X10 197 help 198 If you say yes here you get support for the Analog Devices 199 ADT7410 and ADT7420 temperature monitoring chips. 200 201 This driver can also be built as a module. If so, the module 202 will be called adt7410. 203 204config SENSORS_ADT7411 205 tristate "Analog Devices ADT7411" 206 depends on I2C 207 help 208 If you say yes here you get support for the Analog Devices 209 ADT7411 voltage and temperature monitoring chip. 210 211 This driver can also be built as a module. If so, the module 212 will be called adt7411. 213 214config SENSORS_ADT7462 215 tristate "Analog Devices ADT7462" 216 depends on I2C 217 help 218 If you say yes here you get support for the Analog Devices 219 ADT7462 temperature monitoring chips. 220 221 This driver can also be built as a module. If so, the module 222 will be called adt7462. 223 224config SENSORS_ADT7470 225 tristate "Analog Devices ADT7470" 226 depends on I2C 227 select REGMAP_I2C 228 help 229 If you say yes here you get support for the Analog Devices 230 ADT7470 temperature monitoring chips. 231 232 This driver can also be built as a module. If so, the module 233 will be called adt7470. 234 235config SENSORS_ADT7475 236 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" 237 depends on I2C 238 select HWMON_VID 239 help 240 If you say yes here you get support for the Analog Devices 241 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring 242 chips. 243 244 This driver can also be built as a module. If so, the module 245 will be called adt7475. 246 247config SENSORS_AHT10 248 tristate "Aosong AHT10, AHT20" 249 depends on I2C 250 select CRC8 251 help 252 If you say yes here, you get support for the Aosong AHT10 and AHT20 253 temperature and humidity sensors 254 255 This driver can also be built as a module. If so, the module 256 will be called aht10. 257 258config SENSORS_AQUACOMPUTER_D5NEXT 259 tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, Farbwerk 360, High Flow Next" 260 depends on USB_HID 261 select CRC16 262 help 263 If you say yes here you get support for sensors and fans of 264 the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan 265 controllers, Farbwerk and Farbwerk 360 RGB controllers, High Flow 266 Next sensor, where available. 267 268 This driver can also be built as a module. If so, the module 269 will be called aquacomputer_d5next. 270 271config SENSORS_AS370 272 tristate "Synaptics AS370 SoC hardware monitoring driver" 273 help 274 If you say yes here you get support for the PVT sensors of 275 the Synaptics AS370 SoC 276 277 This driver can also be built as a module. If so, the module 278 will be called as370-hwmon. 279 280 281config SENSORS_ASC7621 282 tristate "Andigilog aSC7621" 283 depends on I2C 284 help 285 If you say yes here you get support for the aSC7621 286 family of SMBus sensors chip found on most Intel X38, X48, X58, 287 945, 965 and 975 desktop boards. Currently supported chips: 288 aSC7621 289 aSC7621a 290 291 This driver can also be built as a module. If so, the module 292 will be called asc7621. 293 294config SENSORS_ASUS_ROG_RYUJIN 295 tristate "ASUS ROG RYUJIN II 360 hardware monitoring driver" 296 depends on HID 297 help 298 If you say yes here you get support for the fans and sensors of 299 the ASUS ROG RYUJIN II 360 AIO CPU liquid cooler. 300 301 This driver can also be built as a module. If so, the module 302 will be called asus_rog_ryujin. 303 304config SENSORS_AXI_FAN_CONTROL 305 tristate "Analog Devices FAN Control HDL Core driver" 306 help 307 If you say yes here you get support for the Analog Devices 308 AXI HDL FAN monitoring core. 309 310 This driver can also be built as a module. If so, the module 311 will be called axi-fan-control 312 313config SENSORS_K8TEMP 314 tristate "AMD Athlon64/FX or Opteron temperature sensor" 315 depends on X86 && PCI 316 help 317 If you say yes here you get support for the temperature 318 sensor(s) inside your CPU. Supported is whole AMD K8 319 microarchitecture. Please note that you will need at least 320 lm-sensors 2.10.1 for proper userspace support. 321 322 This driver can also be built as a module. If so, the module 323 will be called k8temp. 324 325config SENSORS_K10TEMP 326 tristate "AMD Family 10h+ temperature sensor" 327 depends on X86 && PCI && AMD_NB 328 help 329 If you say yes here you get support for the temperature 330 sensor(s) inside your CPU. Supported are later revisions of 331 the AMD Family 10h and all revisions of the AMD Family 11h, 332 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo) 333 and 16h (Kabini/Mullins) microarchitectures. 334 335 This driver can also be built as a module. If so, the module 336 will be called k10temp. 337 338config SENSORS_FAM15H_POWER 339 tristate "AMD Family 15h processor power" 340 depends on X86 && PCI && CPU_SUP_AMD 341 help 342 If you say yes here you get support for processor power 343 information of your AMD family 15h CPU. 344 345 This driver can also be built as a module. If so, the module 346 will be called fam15h_power. 347 348config SENSORS_APPLESMC 349 tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" 350 depends on INPUT && X86 351 select NEW_LEDS 352 select LEDS_CLASS 353 help 354 This driver provides support for the Apple System Management 355 Controller, which provides an accelerometer (Apple Sudden Motion 356 Sensor), light sensors, temperature sensors, keyboard backlight 357 control and fan control. 358 359 Only Intel-based Apple's computers are supported (MacBook Pro, 360 MacBook, MacMini). 361 362 Data from the different sensors, keyboard backlight control and fan 363 control are accessible via sysfs. 364 365 This driver also provides an absolute input class device, allowing 366 the laptop to act as a pinball machine-esque joystick. 367 368 Say Y here if you have an applicable laptop and want to experience 369 the awesome power of applesmc. 370 371config SENSORS_ARM_SCMI 372 tristate "ARM SCMI Sensors" 373 depends on ARM_SCMI_PROTOCOL 374 depends on THERMAL || !THERMAL_OF 375 help 376 This driver provides support for temperature, voltage, current 377 and power sensors available on SCMI based platforms. The actual 378 number and type of sensors exported depend on the platform. 379 380 This driver can also be built as a module. If so, the module 381 will be called scmi-hwmon. 382 383config SENSORS_ARM_SCPI 384 tristate "ARM SCPI Sensors" 385 depends on ARM_SCPI_PROTOCOL 386 depends on THERMAL || !THERMAL_OF 387 help 388 This driver provides support for temperature, voltage, current 389 and power sensors available on ARM Ltd's SCP based platforms. The 390 actual number and type of sensors exported depend on the platform. 391 392config SENSORS_ASB100 393 tristate "Asus ASB100 Bach" 394 depends on (X86 || COMPILE_TEST) && I2C 395 select HWMON_VID 396 help 397 If you say yes here you get support for the ASB100 Bach sensor 398 chip found on some Asus mainboards. 399 400 This driver can also be built as a module. If so, the module 401 will be called asb100. 402 403config SENSORS_ASPEED 404 tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver" 405 depends on ARCH_ASPEED || COMPILE_TEST 406 depends on THERMAL || THERMAL=n 407 select REGMAP 408 help 409 This driver provides support for ASPEED AST2400/AST2500 PWM 410 and Fan Tacho controllers. 411 412 This driver can also be built as a module. If so, the module 413 will be called aspeed_pwm_tacho. 414 415config SENSORS_ASPEED_G6 416 tristate "ASPEED g6 PWM and Fan tach driver" 417 depends on ARCH_ASPEED || COMPILE_TEST 418 depends on PWM 419 help 420 This driver provides support for ASPEED G6 PWM and Fan Tach 421 controllers. 422 423 This driver can also be built as a module. If so, the module 424 will be called aspeed_pwm_tacho. 425 426config SENSORS_ATXP1 427 tristate "Attansic ATXP1 VID controller" 428 depends on I2C 429 select HWMON_VID 430 help 431 If you say yes here you get support for the Attansic ATXP1 VID 432 controller. 433 434 If your board have such a chip, you are able to control your CPU 435 core and other voltages. 436 437 This driver can also be built as a module. If so, the module 438 will be called atxp1. 439 440config SENSORS_BT1_PVT 441 tristate "Baikal-T1 Process, Voltage, Temperature sensor driver" 442 depends on MIPS_BAIKAL_T1 || COMPILE_TEST 443 select POLYNOMIAL 444 help 445 If you say yes here you get support for Baikal-T1 PVT sensor 446 embedded into the SoC. 447 448 This driver can also be built as a module. If so, the module will be 449 called bt1-pvt. 450 451config SENSORS_BT1_PVT_ALARMS 452 bool "Enable Baikal-T1 PVT sensor alarms" 453 depends on SENSORS_BT1_PVT 454 help 455 Baikal-T1 PVT IP-block provides threshold registers for each 456 supported sensor. But the corresponding interrupts might be 457 generated by the thresholds comparator only in synchronization with 458 a data conversion. Additionally there is only one sensor data can 459 be converted at a time. All of these makes the interface impossible 460 to be used for the hwmon alarms implementation without periodic 461 switch between the PVT sensors. By default the data conversion is 462 performed on demand from the user-space. If this config is enabled 463 the data conversion will be periodically performed and the data will be 464 saved in the internal driver cache. 465 466config SENSORS_CHIPCAP2 467 tristate "Amphenol ChipCap 2 relative humidity and temperature sensor" 468 depends on I2C 469 help 470 Say yes here to build support for the Amphenol ChipCap 2 471 relative humidity and temperature sensor. 472 473 To compile this driver as a module, choose M here: the module 474 will be called chipcap2. 475 476config SENSORS_CORSAIR_CPRO 477 tristate "Corsair Commander Pro controller" 478 depends on HID 479 help 480 If you say yes here you get support for the Corsair Commander Pro 481 controller. 482 483 This driver can also be built as a module. If so, the module 484 will be called corsair-cpro. 485 486config SENSORS_CORSAIR_PSU 487 tristate "Corsair PSU HID controller" 488 depends on HID 489 help 490 If you say yes here you get support for Corsair PSUs with a HID 491 interface. 492 Currently this driver supports the (RM/HX)550i, (RM/HX)650i, 493 (RM/HX)750i, (RM/HX)850i, (RM/HX)1000i and HX1200i power supplies 494 by Corsair. 495 496 This driver can also be built as a module. If so, the module 497 will be called corsair-psu. 498 499config SENSORS_CROS_EC 500 tristate "ChromeOS Embedded Controller sensors" 501 depends on MFD_CROS_EC_DEV 502 default MFD_CROS_EC_DEV 503 help 504 If you say yes here you get support for ChromeOS Embedded Controller 505 sensors. 506 507 This driver can also be built as a module. If so, the module 508 will be called cros_ec_hwmon. 509 510config SENSORS_DRIVETEMP 511 tristate "Hard disk drives with temperature sensors" 512 depends on SCSI && ATA 513 help 514 If you say yes you get support for the temperature sensor on 515 hard disk drives. 516 517 This driver can also be built as a module. If so, the module 518 will be called drivetemp. 519 520config SENSORS_DS620 521 tristate "Dallas Semiconductor DS620" 522 depends on I2C 523 help 524 If you say yes here you get support for Dallas Semiconductor 525 DS620 sensor chip. 526 527 This driver can also be built as a module. If so, the module 528 will be called ds620. 529 530config SENSORS_DS1621 531 tristate "Dallas Semiconductor DS1621 and compatibles" 532 depends on I2C 533 help 534 If you say yes here you get support for Dallas Semiconductor/Maxim 535 Integrated DS1621 sensor chips and compatible models including: 536 537 - Dallas Semiconductor DS1625 538 - Maxim Integrated DS1631 539 - Maxim Integrated DS1721 540 - Maxim Integrated DS1731 541 542 This driver can also be built as a module. If so, the module 543 will be called ds1621. 544 545config SENSORS_DELL_SMM 546 tristate "Dell laptop SMM BIOS hwmon driver" 547 depends on ACPI_WMI 548 depends on X86 549 imply THERMAL 550 help 551 This hwmon driver adds support for reporting temperature of different 552 sensors and controls the fans on Dell laptops via System Management 553 Mode provided by Dell BIOS. 554 555 When option I8K is also enabled this driver provides legacy /proc/i8k 556 userspace interface for i8kutils package. 557 558config I8K 559 bool "Legacy /proc/i8k interface of Dell laptop SMM BIOS hwmon driver" 560 depends on SENSORS_DELL_SMM 561 depends on PROC_FS 562 help 563 This option enables the legacy /proc/i8k userspace interface of the 564 dell-smm-hwmon driver. The character file /proc/i8k exposes the BIOS 565 version, temperatures and allows control of fan speeds of some Dell 566 laptops. Sometimes it also reports power and hotkey status. 567 568 This interface is required to run programs from the i8kutils package. 569 570 Say Y if you intend to run userspace programs that use this interface. 571 Say N otherwise. 572 573config SENSORS_DA9052_ADC 574 tristate "Dialog DA9052/DA9053 ADC" 575 depends on PMIC_DA9052 576 help 577 Say y here to support the ADC found on Dialog Semiconductor 578 DA9052-BC and DA9053-AA/Bx PMICs. 579 580 This driver can also be built as module. If so, the module 581 will be called da9052-hwmon. 582 583config SENSORS_DA9055 584 tristate "Dialog Semiconductor DA9055 ADC" 585 depends on MFD_DA9055 586 help 587 If you say yes here you get support for ADC on the Dialog 588 Semiconductor DA9055 PMIC. 589 590 This driver can also be built as a module. If so, the module 591 will be called da9055-hwmon. 592 593config SENSORS_I5K_AMB 594 tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" 595 depends on PCI 596 help 597 If you say yes here you get support for FB-DIMM AMB temperature 598 monitoring chips on systems with the Intel 5000 series chipset. 599 600 This driver can also be built as a module. If so, the module 601 will be called i5k_amb. 602 603config SENSORS_SPARX5 604 tristate "Sparx5 SoC temperature sensor" 605 depends on ARCH_SPARX5 || COMPILE_TEST 606 help 607 If you say yes here you get support for temperature monitoring 608 with the Microchip Sparx5 SoC. 609 610 This driver can also be built as a module. If so, the module 611 will be called sparx5-temp. 612 613config SENSORS_F71805F 614 tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" 615 depends on HAS_IOPORT 616 depends on !PPC 617 help 618 If you say yes here you get support for hardware monitoring 619 features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG 620 Super-I/O chips. 621 622 This driver can also be built as a module. If so, the module 623 will be called f71805f. 624 625config SENSORS_F71882FG 626 tristate "Fintek F71882FG and compatibles" 627 depends on HAS_IOPORT 628 depends on !PPC 629 help 630 If you say yes here you get support for hardware monitoring 631 features of many Fintek Super-I/O (LPC) chips. The currently 632 supported chips are: 633 F71808E/A 634 F71858FG 635 F71862FG 636 F71863FG 637 F71869F/E/A 638 F71882FG 639 F71883FG 640 F71889FG/ED/A 641 F8000 642 F81801U 643 F81865F 644 645 This driver can also be built as a module. If so, the module 646 will be called f71882fg. 647 648config SENSORS_F75375S 649 tristate "Fintek F75375S/SP, F75373 and F75387" 650 depends on I2C 651 help 652 If you say yes here you get support for hardware monitoring 653 features of the Fintek F75375S/SP, F75373 and F75387 654 655 This driver can also be built as a module. If so, the module 656 will be called f75375s. 657 658config SENSORS_GSC 659 tristate "Gateworks System Controller ADC" 660 depends on MFD_GATEWORKS_GSC 661 help 662 Support for the Gateworks System Controller A/D converters. 663 664 To compile this driver as a module, choose M here: 665 the module will be called gsc-hwmon. 666 667config SENSORS_MC13783_ADC 668 tristate "Freescale MC13783/MC13892 ADC" 669 depends on MFD_MC13XXX 670 help 671 Support for the A/D converter on MC13783 and MC13892 PMIC. 672 673config SENSORS_FSCHMD 674 tristate "Fujitsu Siemens Computers sensor chips" 675 depends on (X86 || COMPILE_TEST) && I2C 676 help 677 If you say yes here you get support for the following Fujitsu 678 Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, 679 Heimdall, Heracles, Hades and Syleus including support for the 680 integrated watchdog. 681 682 This is a merged driver for FSC sensor chips replacing the fscpos, 683 fscscy and fscher drivers and adding support for several other FSC 684 sensor chips. 685 686 This driver can also be built as a module. If so, the module 687 will be called fschmd. 688 689config SENSORS_FTSTEUTATES 690 tristate "Fujitsu Technology Solutions sensor chip Teutates" 691 depends on I2C && WATCHDOG 692 select WATCHDOG_CORE 693 help 694 If you say yes here you get support for the Fujitsu Technology 695 Solutions (FTS) sensor chip "Teutates" including support for 696 the integrated watchdog. 697 698 This driver can also be built as a module. If so, the module 699 will be called ftsteutates. 700 701config SENSORS_GIGABYTE_WATERFORCE 702 tristate "Gigabyte Waterforce X240/X280/X360 AIO CPU coolers" 703 depends on USB_HID 704 help 705 If you say yes here you get support for hardware monitoring for the 706 Gigabyte Waterforce X240/X280/X360 all-in-one CPU liquid coolers. 707 708 This driver can also be built as a module. If so, the module 709 will be called gigabyte_waterforce. 710 711config SENSORS_GL518SM 712 tristate "Genesys Logic GL518SM" 713 depends on I2C 714 help 715 If you say yes here you get support for Genesys Logic GL518SM 716 sensor chips. 717 718 This driver can also be built as a module. If so, the module 719 will be called gl518sm. 720 721config SENSORS_GL520SM 722 tristate "Genesys Logic GL520SM" 723 depends on I2C 724 select HWMON_VID 725 help 726 If you say yes here you get support for Genesys Logic GL520SM 727 sensor chips. 728 729 This driver can also be built as a module. If so, the module 730 will be called gl520sm. 731 732config SENSORS_G760A 733 tristate "GMT G760A" 734 depends on I2C 735 help 736 If you say yes here you get support for Global Mixed-mode 737 Technology Inc G760A fan speed PWM controller chips. 738 739 This driver can also be built as a module. If so, the module 740 will be called g760a. 741 742config SENSORS_G762 743 tristate "GMT G762 and G763" 744 depends on I2C 745 help 746 If you say yes here you get support for Global Mixed-mode 747 Technology Inc G762 and G763 fan speed PWM controller chips. 748 749 This driver can also be built as a module. If so, the module 750 will be called g762. 751 752config SENSORS_GPIO_FAN 753 tristate "GPIO fan" 754 depends on OF_GPIO 755 depends on GPIOLIB || COMPILE_TEST 756 depends on THERMAL || THERMAL=n 757 help 758 If you say yes here you get support for fans connected to GPIO lines. 759 760 This driver can also be built as a module. If so, the module 761 will be called gpio-fan. 762 763config SENSORS_GXP_FAN_CTRL 764 tristate "HPE GXP fan controller" 765 depends on ARCH_HPE_GXP || COMPILE_TEST 766 help 767 If you say yes here you get support for GXP fan control functionality. 768 769 The GXP controls fan function via the CPLD through the use of PWM 770 registers. This driver reports status and pwm setting of the fans. 771 772config SENSORS_HIH6130 773 tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor" 774 depends on I2C 775 help 776 If you say yes here you get support for Honeywell Humidicon 777 HIH-6130 and HIH-6131 Humidicon humidity sensors. 778 779 This driver can also be built as a module. If so, the module 780 will be called hih6130. 781 782config SENSORS_HS3001 783 tristate "Renesas HS3001 humidity and temperature sensors" 784 depends on I2C 785 help 786 If you say yes here you get support for the Renesas HS3001, 787 to HS3004 humidity and temperature sensors. 788 789 This driver can also be built as a module. If so, the module 790 will be called hs3001. 791 792config SENSORS_IBMAEM 793 tristate "IBM Active Energy Manager temperature/power sensors and control" 794 select IPMI_SI 795 depends on IPMI_HANDLER 796 help 797 If you say yes here you get support for the temperature and 798 power sensors and capping hardware in various IBM System X 799 servers that support Active Energy Manager. This includes 800 the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, 801 and certain HC10/HS2x/LS2x/QS2x blades. 802 803 This driver can also be built as a module. If so, the module 804 will be called ibmaem. 805 806config SENSORS_IBMPEX 807 tristate "IBM PowerExecutive temperature/power sensors" 808 select IPMI_SI 809 depends on IPMI_HANDLER 810 help 811 If you say yes here you get support for the temperature and 812 power sensors in various IBM System X servers that support 813 PowerExecutive. So far this includes the x3350, x3550, x3650, 814 x3655, and x3755; the x3800, x3850, and x3950 models that have 815 PCI Express; and some of the HS2x, LS2x, and QS2x blades. 816 817 This driver can also be built as a module. If so, the module 818 will be called ibmpex. 819 820config SENSORS_IBMPOWERNV 821 tristate "IBM POWERNV platform sensors" 822 depends on PPC_POWERNV 823 default y 824 help 825 If you say yes here you get support for the temperature/fan/power 826 sensors on your PowerNV platform. 827 828 This driver can also be built as a module. If so, the module 829 will be called ibmpowernv. 830 831config SENSORS_IIO_HWMON 832 tristate "Hwmon driver that uses channels specified via iio maps" 833 depends on IIO 834 help 835 This is a platform driver that in combination with a suitable 836 map allows IIO devices to provide basic hwmon functionality 837 for those channels specified in the map. This map can be provided 838 either via platform data or the device tree bindings. 839 840config SENSORS_I5500 841 tristate "Intel 5500/5520/X58 temperature sensor" 842 depends on X86 && PCI 843 help 844 If you say yes here you get support for the temperature 845 sensor inside the Intel 5500, 5520 and X58 chipsets. 846 847 This driver can also be built as a module. If so, the module 848 will be called i5500_temp. 849 850config SENSORS_CORETEMP 851 tristate "Intel Core/Core2/Atom temperature sensor" 852 depends on X86 853 help 854 If you say yes here you get support for the temperature 855 sensor inside your CPU. Most of the family 6 CPUs 856 are supported. Check Documentation/hwmon/coretemp.rst for details. 857 858config SENSORS_IT87 859 tristate "ITE IT87xx and compatibles" 860 depends on HAS_IOPORT 861 depends on !PPC 862 select HWMON_VID 863 help 864 If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F, 865 IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E, 866 IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, 867 IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950 868 clone. 869 870 This driver can also be built as a module. If so, the module 871 will be called it87. 872 873config SENSORS_JC42 874 tristate "JEDEC JC42.4 compliant memory module temperature sensors" 875 depends on I2C 876 select REGMAP_I2C 877 help 878 If you say yes here, you get support for JEDEC JC42.4 compliant 879 temperature sensors, which are used on many DDR3 memory modules for 880 mobile devices and servers. Support will include, but not be limited 881 to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805, 882 MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, 883 STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001. 884 885 This driver can also be built as a module. If so, the module 886 will be called jc42. 887 888config SENSORS_POWERZ 889 tristate "ChargerLAB POWER-Z USB-C tester" 890 depends on USB 891 help 892 If you say yes here you get support for ChargerLAB POWER-Z series of 893 USB-C charging testers. 894 895 This driver can also be built as a module. If so, the module 896 will be called powerz. 897 898config SENSORS_POWR1220 899 tristate "Lattice POWR1220 Power Monitoring" 900 depends on I2C 901 help 902 If you say yes here you get access to the hardware monitoring 903 functions of the Lattice POWR1220 isp Power Supply Monitoring, 904 Sequencing and Margining Controller. 905 906 This driver can also be built as a module. If so, the module 907 will be called powr1220. 908 909config SENSORS_LAN966X 910 tristate "Microchip LAN966x Hardware Monitoring" 911 depends on SOC_LAN966 || COMPILE_TEST 912 select REGMAP 913 select POLYNOMIAL 914 help 915 If you say yes here you get support for temperature monitoring 916 on the Microchip LAN966x SoC. 917 918 This driver can also be built as a module. If so, the module 919 will be called lan966x-hwmon. 920 921config SENSORS_LENOVO_EC 922 tristate "Sensor reader for Lenovo ThinkStations" 923 depends on X86 924 help 925 If you say yes here you get support for LENOVO 926 EC Sensor data on newer ThinkStation systems 927 928 This driver can also be built as a module. If so, the module 929 will be called lenovo_ec_sensors. 930 931config SENSORS_LINEAGE 932 tristate "Lineage Compact Power Line Power Entry Module" 933 depends on I2C 934 help 935 If you say yes here you get support for the Lineage Compact Power Line 936 series of DC/DC and AC/DC converters such as CP1800, CP2000AC, 937 CP2000DC, CP2725, and others. 938 939 This driver can also be built as a module. If so, the module 940 will be called lineage-pem. 941 942config SENSORS_LOCHNAGAR 943 tristate "Lochnagar Hardware Monitor" 944 depends on MFD_LOCHNAGAR 945 help 946 If you say yes here you get support for Lochnagar 2 temperature, 947 voltage and current sensors abilities. 948 949 This driver can also be built as a module. If so, the module 950 will be called lochnagar-hwmon. 951 952config SENSORS_LTC2945 953 tristate "Linear Technology LTC2945" 954 depends on I2C 955 select REGMAP_I2C 956 help 957 If you say yes here you get support for Linear Technology LTC2945 958 I2C System Monitor. 959 960 This driver can also be built as a module. If so, the module will 961 be called ltc2945. 962 963config SENSORS_LTC2947 964 tristate 965 966config SENSORS_LTC2947_I2C 967 tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over I2C" 968 depends on I2C 969 select REGMAP_I2C 970 select SENSORS_LTC2947 971 help 972 If you say yes here you get support for Linear Technology LTC2947 973 I2C High Precision Power and Energy Monitor 974 975 This driver can also be built as a module. If so, the module will 976 be called ltc2947-i2c. 977 978config SENSORS_LTC2947_SPI 979 tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over SPI" 980 depends on SPI_MASTER 981 select REGMAP_SPI 982 select SENSORS_LTC2947 983 help 984 If you say yes here you get support for Linear Technology LTC2947 985 SPI High Precision Power and Energy Monitor 986 987 This driver can also be built as a module. If so, the module will 988 be called ltc2947-spi. 989 990config SENSORS_LTC2990 991 tristate "Linear Technology LTC2990" 992 depends on I2C 993 help 994 If you say yes here you get support for Linear Technology LTC2990 995 I2C System Monitor. The LTC2990 supports a combination of voltage, 996 current and temperature monitoring. 997 998 This driver can also be built as a module. If so, the module will 999 be called ltc2990. 1000 1001config SENSORS_LTC2991 1002 tristate "Analog Devices LTC2991" 1003 depends on I2C 1004 select REGMAP_I2C 1005 help 1006 If you say yes here you get support for Analog Devices LTC2991 1007 Octal I2C Voltage, Current, and Temperature Monitor. The LTC2991 1008 supports a combination of voltage, current and temperature monitoring. 1009 1010 This driver can also be built as a module. If so, the module will 1011 be called ltc2991. 1012 1013config SENSORS_LTC2992 1014 tristate "Linear Technology LTC2992" 1015 depends on I2C 1016 depends on GPIOLIB 1017 help 1018 If you say yes here you get support for Linear Technology LTC2992 1019 I2C System Monitor. The LTC2992 measures current, voltage, and 1020 power of two supplies. 1021 1022 This driver can also be built as a module. If so, the module will 1023 be called ltc2992. 1024 1025config SENSORS_LTC4151 1026 tristate "Linear Technology LTC4151" 1027 depends on I2C 1028 help 1029 If you say yes here you get support for Linear Technology LTC4151 1030 High Voltage I2C Current and Voltage Monitor interface. 1031 1032 This driver can also be built as a module. If so, the module will 1033 be called ltc4151. 1034 1035config SENSORS_LTC4215 1036 tristate "Linear Technology LTC4215" 1037 depends on I2C 1038 help 1039 If you say yes here you get support for Linear Technology LTC4215 1040 Hot Swap Controller I2C interface. 1041 1042 This driver can also be built as a module. If so, the module will 1043 be called ltc4215. 1044 1045config SENSORS_LTC4222 1046 tristate "Linear Technology LTC4222" 1047 depends on I2C 1048 select REGMAP_I2C 1049 help 1050 If you say yes here you get support for Linear Technology LTC4222 1051 Dual Hot Swap Controller I2C interface. 1052 1053 This driver can also be built as a module. If so, the module will 1054 be called ltc4222. 1055 1056config SENSORS_LTC4245 1057 tristate "Linear Technology LTC4245" 1058 depends on I2C 1059 help 1060 If you say yes here you get support for Linear Technology LTC4245 1061 Multiple Supply Hot Swap Controller I2C interface. 1062 1063 This driver can also be built as a module. If so, the module will 1064 be called ltc4245. 1065 1066config SENSORS_LTC4260 1067 tristate "Linear Technology LTC4260" 1068 depends on I2C 1069 select REGMAP_I2C 1070 help 1071 If you say yes here you get support for Linear Technology LTC4260 1072 Positive Voltage Hot Swap Controller I2C interface. 1073 1074 This driver can also be built as a module. If so, the module will 1075 be called ltc4260. 1076 1077config SENSORS_LTC4261 1078 tristate "Linear Technology LTC4261" 1079 depends on I2C 1080 help 1081 If you say yes here you get support for Linear Technology LTC4261 1082 Negative Voltage Hot Swap Controller I2C interface. 1083 1084 This driver can also be built as a module. If so, the module will 1085 be called ltc4261. 1086 1087config SENSORS_LTC4282 1088 tristate "Analog Devices LTC4282" 1089 depends on I2C 1090 select REGMAP_I2C 1091 help 1092 If you say yes here you get support for Analog Devices LTC4282 1093 High Current Hot Swap Controller I2C interface. 1094 1095 This driver can also be built as a module. If so, the module will 1096 be called ltc4282. 1097 1098config SENSORS_LTQ_CPUTEMP 1099 bool "Lantiq cpu temperature sensor driver" 1100 depends on SOC_XWAY 1101 help 1102 If you say yes here you get support for the temperature 1103 sensor inside your CPU. 1104 1105config SENSORS_MAX1111 1106 tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" 1107 depends on SPI_MASTER 1108 help 1109 Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 1110 ADC chips. 1111 1112 This driver can also be built as a module. If so, the module 1113 will be called max1111. 1114 1115config SENSORS_MAX127 1116 tristate "Maxim MAX127 12-bit 8-channel Data Acquisition System" 1117 depends on I2C 1118 help 1119 Say y here to support Maxim's MAX127 DAS chips. 1120 1121 This driver can also be built as a module. If so, the module 1122 will be called max127. 1123 1124config SENSORS_MAX16065 1125 tristate "Maxim MAX16065 System Manager and compatibles" 1126 depends on I2C 1127 help 1128 If you say yes here you get support for hardware monitoring 1129 capabilities of the following Maxim System Manager chips. 1130 MAX16065 1131 MAX16066 1132 MAX16067 1133 MAX16068 1134 MAX16070 1135 MAX16071 1136 1137 This driver can also be built as a module. If so, the module 1138 will be called max16065. 1139 1140config SENSORS_MAX1619 1141 tristate "Maxim MAX1619 sensor chip" 1142 depends on I2C 1143 help 1144 If you say yes here you get support for MAX1619 sensor chip. 1145 1146 This driver can also be built as a module. If so, the module 1147 will be called max1619. 1148 1149config SENSORS_MAX1668 1150 tristate "Maxim MAX1668 and compatibles" 1151 depends on I2C 1152 select REGMAP_I2C 1153 help 1154 If you say yes here you get support for MAX1668, MAX1989 and 1155 MAX1805 chips. 1156 1157 This driver can also be built as a module. If so, the module 1158 will be called max1668. 1159 1160config SENSORS_MAX197 1161 tristate "Maxim MAX197 and compatibles" 1162 help 1163 Support for the Maxim MAX197 A/D converter. 1164 Support will include, but not be limited to, MAX197, and MAX199. 1165 1166 This driver can also be built as a module. If so, the module 1167 will be called max197. 1168 1169config SENSORS_MAX31722 1170 tristate "MAX31722 temperature sensor" 1171 depends on SPI 1172 help 1173 Support for the Maxim Integrated MAX31722/MAX31723 digital 1174 thermometers/thermostats operating over an SPI interface. 1175 1176 This driver can also be built as a module. If so, the module 1177 will be called max31722. 1178 1179config SENSORS_MAX31730 1180 tristate "MAX31730 temperature sensor" 1181 depends on I2C 1182 help 1183 Support for the Maxim Integrated MAX31730 3-Channel Remote 1184 Temperature Sensor. 1185 1186 This driver can also be built as a module. If so, the module 1187 will be called max31730. 1188 1189config SENSORS_MAX31760 1190 tristate "MAX31760 fan speed controller" 1191 depends on I2C 1192 select REGMAP_I2C 1193 help 1194 Support for the Analog Devices MAX31760 Precision Fan-Speed 1195 Controller. MAX31760 integrates temperature sensing along with 1196 precision PWM fan control. 1197 1198 This driver can also be built as a module. If so, the module 1199 will be called max31760. 1200 1201config MAX31827 1202 tristate "MAX31827 low-power temperature switch and similar devices" 1203 depends on I2C 1204 select REGMAP_I2C 1205 help 1206 If you say yes here you get support for MAX31827, MAX31828 and 1207 MAX31829 low-power temperature switches and sensors connected with I2C. 1208 1209 This driver can also be built as a module. If so, the module 1210 will be called max31827. 1211 1212config SENSORS_MAX6620 1213 tristate "Maxim MAX6620 fan controller" 1214 depends on I2C 1215 help 1216 If you say yes here you get support for the MAX6620 1217 fan controller. 1218 1219 This driver can also be built as a module. If so, the module 1220 will be called max6620. 1221 1222config SENSORS_MAX6621 1223 tristate "Maxim MAX6621 sensor chip" 1224 depends on I2C 1225 select REGMAP_I2C 1226 help 1227 If you say yes here you get support for MAX6621 sensor chip. 1228 MAX6621 is a PECI-to-I2C translator provides an efficient, 1229 low-cost solution for PECI-to-SMBus/I2C protocol conversion. 1230 It allows reading the temperature from the PECI-compliant 1231 host directly from up to four PECI-enabled CPUs. 1232 1233 This driver can also be built as a module. If so, the module 1234 will be called max6621. 1235 1236config SENSORS_MAX6639 1237 tristate "Maxim MAX6639 sensor chip" 1238 depends on I2C 1239 select REGMAP_I2C 1240 help 1241 If you say yes here you get support for the MAX6639 1242 sensor chips. 1243 1244 This driver can also be built as a module. If so, the module 1245 will be called max6639. 1246 1247config SENSORS_MAX6650 1248 tristate "Maxim MAX6650 sensor chip" 1249 depends on I2C 1250 depends on THERMAL || THERMAL=n 1251 help 1252 If you say yes here you get support for the MAX6650 / MAX6651 1253 sensor chips. 1254 1255 This driver can also be built as a module. If so, the module 1256 will be called max6650. 1257 1258config SENSORS_MAX6697 1259 tristate "Maxim MAX6697 and compatibles" 1260 depends on I2C 1261 help 1262 If you say yes here you get support for MAX6581, MAX6602, MAX6622, 1263 MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 1264 temperature sensor chips. 1265 1266 This driver can also be built as a module. If so, the module 1267 will be called max6697. 1268 1269config SENSORS_MAX31790 1270 tristate "Maxim MAX31790 sensor chip" 1271 depends on I2C 1272 help 1273 If you say yes here you get support for 6-Channel PWM-Output 1274 Fan RPM Controller. 1275 1276 This driver can also be built as a module. If so, the module 1277 will be called max31790. 1278 1279config SENSORS_MC34VR500 1280 tristate "NXP MC34VR500 hardware monitoring driver" 1281 depends on I2C 1282 select REGMAP_I2C 1283 help 1284 If you say yes here you get support for the temperature and input 1285 voltage sensors of the NXP MC34VR500. 1286 1287config SENSORS_MCP3021 1288 tristate "Microchip MCP3021 and compatibles" 1289 depends on I2C 1290 help 1291 If you say yes here you get support for MCP3021 and MCP3221. 1292 The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 1293 with 12-bit resolution. 1294 1295 This driver can also be built as a module. If so, the module 1296 will be called mcp3021. 1297 1298config SENSORS_MLXREG_FAN 1299 tristate "Mellanox FAN driver" 1300 depends on MELLANOX_PLATFORM 1301 imply THERMAL 1302 select REGMAP 1303 help 1304 This option enables support for the FAN control on the Mellanox 1305 Ethernet and InfiniBand switches. The driver can be activated by the 1306 platform device add call. Say Y to enable these. To compile this 1307 driver as a module, choose 'M' here: the module will be called 1308 mlxreg-fan. 1309 1310config SENSORS_TC654 1311 tristate "Microchip TC654/TC655 and compatibles" 1312 depends on I2C 1313 help 1314 If you say yes here you get support for TC654 and TC655. 1315 The TC654 and TC655 are PWM mode fan speed controllers with 1316 FanSense technology for use with brushless DC fans. 1317 1318 This driver can also be built as a module. If so, the module 1319 will be called tc654. 1320 1321config SENSORS_TPS23861 1322 tristate "Texas Instruments TPS23861 PoE PSE" 1323 depends on I2C 1324 select REGMAP_I2C 1325 help 1326 If you say yes here you get support for Texas Instruments 1327 TPS23861 802.3at PoE PSE chips. 1328 1329 This driver can also be built as a module. If so, the module 1330 will be called tps23861. 1331 1332config SENSORS_MENF21BMC_HWMON 1333 tristate "MEN 14F021P00 BMC Hardware Monitoring" 1334 depends on MFD_MENF21BMC 1335 help 1336 Say Y here to include support for the MEN 14F021P00 BMC 1337 hardware monitoring. 1338 1339 This driver can also be built as a module. If so the module 1340 will be called menf21bmc_hwmon. 1341 1342config SENSORS_MR75203 1343 tristate "Moortec Semiconductor MR75203 PVT Controller" 1344 select REGMAP_MMIO 1345 help 1346 If you say yes here you get support for Moortec MR75203 1347 PVT controller. 1348 1349 This driver can also be built as a module. If so, the module 1350 will be called mr75203. 1351 1352config SENSORS_ADCXX 1353 tristate "National Semiconductor ADCxxxSxxx" 1354 depends on SPI_MASTER 1355 help 1356 If you say yes here you get support for the National Semiconductor 1357 ADC<bb><c>S<sss> chip family, where 1358 * bb is the resolution in number of bits (8, 10, 12) 1359 * c is the number of channels (1, 2, 4, 8) 1360 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 1361 kSPS and 101 for 1 MSPS) 1362 1363 Examples : ADC081S101, ADC124S501, ... 1364 1365 This driver can also be built as a module. If so, the module 1366 will be called adcxx. 1367 1368config SENSORS_LM63 1369 tristate "National Semiconductor LM63 and compatibles" 1370 depends on I2C 1371 help 1372 If you say yes here you get support for the National 1373 Semiconductor LM63, LM64, and LM96163 remote diode digital temperature 1374 sensors with integrated fan control. Such chips are found 1375 on the Tyan S4882 (Thunder K8QS Pro) motherboard, among 1376 others. 1377 1378 This driver can also be built as a module. If so, the module 1379 will be called lm63. 1380 1381config SENSORS_LM70 1382 tristate "National Semiconductor LM70 and compatibles" 1383 depends on SPI_MASTER 1384 help 1385 If you say yes here you get support for the National Semiconductor 1386 LM70, LM71, LM74 and Texas Instruments TMP121/TMP123, TMP122/TMP124, 1387 TMP125 digital temperature sensor chips. 1388 1389 This driver can also be built as a module. If so, the module 1390 will be called lm70. 1391 1392config SENSORS_LM73 1393 tristate "National Semiconductor LM73" 1394 depends on I2C 1395 help 1396 If you say yes here you get support for National Semiconductor LM73 1397 sensor chips. 1398 This driver can also be built as a module. If so, the module 1399 will be called lm73. 1400 1401config SENSORS_LM75 1402 tristate "National Semiconductor LM75 and compatibles" 1403 depends on I2C 1404 select REGMAP_I2C 1405 help 1406 If you say yes here you get support for one common type of 1407 temperature sensor chip, with models including: 1408 1409 - Analog Devices ADT75 1410 - Atmel (now Microchip) AT30TS74 1411 - Dallas Semiconductor DS75, DS1775 and DS7505 1412 - Global Mixed-mode Technology (GMT) G751 1413 - Maxim MAX6625 and MAX6626 1414 - Microchip MCP980x 1415 - National Semiconductor LM75, LM75A 1416 - NXP's LM75A 1417 - ST Microelectronics STDS75 1418 - ST Microelectronics STLM75 1419 - TelCom (now Microchip) TCN75 1420 - Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, 1421 TMP175, TMP275 1422 1423 This driver supports driver model based binding through board 1424 specific I2C device tables. 1425 1426 It also supports the "legacy" style of driver binding. To use 1427 that with some chips which don't replicate LM75 quirks exactly, 1428 you may need the "force" module parameter. 1429 1430 This driver can also be built as a module. If so, the module 1431 will be called lm75. 1432 1433config SENSORS_LM77 1434 tristate "National Semiconductor LM77" 1435 depends on I2C 1436 help 1437 If you say yes here you get support for National Semiconductor LM77 1438 sensor chips. 1439 1440 This driver can also be built as a module. If so, the module 1441 will be called lm77. 1442 1443config SENSORS_LM78 1444 tristate "National Semiconductor LM78 and compatibles" 1445 depends on I2C 1446 select HWMON_VID 1447 help 1448 If you say yes here you get support for National Semiconductor LM78, 1449 LM78-J and LM79. 1450 1451 This driver can also be built as a module. If so, the module 1452 will be called lm78. 1453 1454config SENSORS_LM80 1455 tristate "National Semiconductor LM80 and LM96080" 1456 depends on I2C 1457 help 1458 If you say yes here you get support for National Semiconductor 1459 LM80 and LM96080 sensor chips. 1460 1461 This driver can also be built as a module. If so, the module 1462 will be called lm80. 1463 1464config SENSORS_LM83 1465 tristate "National Semiconductor LM83 and compatibles" 1466 depends on I2C 1467 select REGMAP 1468 help 1469 If you say yes here you get support for National Semiconductor 1470 LM82 and LM83 sensor chips. 1471 1472 This driver can also be built as a module. If so, the module 1473 will be called lm83. 1474 1475config SENSORS_LM85 1476 tristate "National Semiconductor LM85 and compatibles" 1477 depends on I2C 1478 select HWMON_VID 1479 help 1480 If you say yes here you get support for National Semiconductor LM85 1481 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, 1482 EMC6D101, EMC6D102, and EMC6D103. 1483 1484 This driver can also be built as a module. If so, the module 1485 will be called lm85. 1486 1487config SENSORS_LM87 1488 tristate "National Semiconductor LM87 and compatibles" 1489 depends on I2C 1490 select HWMON_VID 1491 help 1492 If you say yes here you get support for National Semiconductor LM87 1493 and Analog Devices ADM1024 sensor chips. 1494 1495 This driver can also be built as a module. If so, the module 1496 will be called lm87. 1497 1498config SENSORS_LM90 1499 tristate "National Semiconductor LM90 and compatibles" 1500 depends on I2C 1501 help 1502 If you say yes here you get support for National Semiconductor LM84, 1503 LM90, LM86, LM89 and LM99, Analog Devices ADM1020, ADM2021, ADM1021A, 1504 ADM1023, ADM1032, ADT7461, ADT7461A, ADT7481, ADT7482, and ADT7483A, 1505 Maxim MAX1617, MAX6642, MAX6646, MAX6647, MAX6648, MAX6649, MAX6654, 1506 MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695, 1507 MAX6696, 1508 ON Semiconductor NCT1008, NCT210, NCT72, NCT214, NCT218, 1509 Winbond/Nuvoton W83L771W/G/AWG/ASG, 1510 Philips NE1618, SA56004, GMT G781, Texas Instruments TMP451 and TMP461 1511 sensor chips. 1512 1513 This driver can also be built as a module. If so, the module 1514 will be called lm90. 1515 1516config SENSORS_LM92 1517 tristate "National Semiconductor LM92 and compatibles" 1518 depends on I2C 1519 select REGMAP_I2C 1520 help 1521 If you say yes here you get support for National Semiconductor LM92 1522 and LM76 as well as Maxim MAX6633/6634/6635 sensor chips. 1523 1524 This driver can also be built as a module. If so, the module 1525 will be called lm92. 1526 1527config SENSORS_LM93 1528 tristate "National Semiconductor LM93 and compatibles" 1529 depends on I2C 1530 select HWMON_VID 1531 help 1532 If you say yes here you get support for National Semiconductor LM93, 1533 LM94, and compatible sensor chips. 1534 1535 This driver can also be built as a module. If so, the module 1536 will be called lm93. 1537 1538config SENSORS_LM95234 1539 tristate "National Semiconductor LM95234 and compatibles" 1540 depends on I2C 1541 select REGMAP_I2C 1542 help 1543 If you say yes here you get support for the LM95233 and LM95234 1544 temperature sensor chips. 1545 1546 This driver can also be built as a module. If so, the module 1547 will be called lm95234. 1548 1549config SENSORS_LM95241 1550 tristate "National Semiconductor LM95241 and compatibles" 1551 depends on I2C 1552 help 1553 If you say yes here you get support for LM95231 and LM95241 sensor 1554 chips. 1555 1556 This driver can also be built as a module. If so, the module 1557 will be called lm95241. 1558 1559config SENSORS_LM95245 1560 tristate "National Semiconductor LM95245 and compatibles" 1561 depends on I2C 1562 select REGMAP_I2C 1563 help 1564 If you say yes here you get support for LM95235 and LM95245 1565 temperature sensor chips. 1566 1567 This driver can also be built as a module. If so, the module 1568 will be called lm95245. 1569 1570config SENSORS_PC87360 1571 tristate "National Semiconductor PC87360 family" 1572 depends on HAS_IOPORT 1573 depends on !PPC 1574 select HWMON_VID 1575 help 1576 If you say yes here you get access to the hardware monitoring 1577 functions of the National Semiconductor PC8736x Super-I/O chips. 1578 The PC87360, PC87363 and PC87364 only have fan monitoring and 1579 control. The PC87365 and PC87366 additionally have voltage and 1580 temperature monitoring. 1581 1582 This driver can also be built as a module. If so, the module 1583 will be called pc87360. 1584 1585config SENSORS_PC87427 1586 tristate "National Semiconductor PC87427" 1587 depends on HAS_IOPORT 1588 depends on !PPC 1589 help 1590 If you say yes here you get access to the hardware monitoring 1591 functions of the National Semiconductor PC87427 Super-I/O chip. 1592 The chip has two distinct logical devices, one for fan speed 1593 monitoring and control, and one for voltage and temperature 1594 monitoring. Fan speed monitoring and control are supported, as 1595 well as temperature monitoring. Voltages aren't supported yet. 1596 1597 This driver can also be built as a module. If so, the module 1598 will be called pc87427. 1599 1600config SENSORS_NTC_THERMISTOR 1601 tristate "NTC thermistor support" 1602 depends on IIO 1603 depends on THERMAL || !THERMAL_OF 1604 help 1605 This driver supports NTC thermistors sensor reading and its 1606 interpretation. The driver can also monitor the temperature and 1607 send notifications about the temperature. 1608 1609 Currently, this driver supports 1610 NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333, 1611 NCP03WF104 and NCP15XH103 from Murata and B57330V2103 and 1612 B57891S0103 from EPCOS. 1613 1614 This driver can also be built as a module. If so, the module 1615 will be called ntc-thermistor. 1616 1617config SENSORS_NCT6683 1618 tristate "Nuvoton NCT6683D" 1619 depends on HAS_IOPORT 1620 depends on !PPC 1621 help 1622 If you say yes here you get support for the hardware monitoring 1623 functionality of the Nuvoton NCT6683D eSIO chip. 1624 1625 This driver can also be built as a module. If so, the module 1626 will be called nct6683. 1627 1628config SENSORS_NCT6775_CORE 1629 tristate 1630 select REGMAP 1631 help 1632 This module contains common code shared by the platform and 1633 i2c versions of the nct6775 driver; it is not useful on its 1634 own. 1635 1636 If built as a module, the module will be called 1637 nct6775-core. 1638 1639config SENSORS_NCT6775 1640 tristate "Platform driver for Nuvoton NCT6775F and compatibles" 1641 depends on HAS_IOPORT 1642 depends on !PPC 1643 depends on ACPI || ACPI=n 1644 select HWMON_VID 1645 select SENSORS_NCT6775_CORE 1646 help 1647 If you say yes here you get support for the hardware monitoring 1648 functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, 1649 NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible 1650 Super-I/O chips. This driver replaces the w83627ehf driver for 1651 NCT6775F and NCT6776F. 1652 1653 This driver can also be built as a module. If so, the module 1654 will be called nct6775. 1655 1656config SENSORS_NCT6775_I2C 1657 tristate "I2C driver for Nuvoton NCT6775F and compatibles" 1658 depends on I2C 1659 select REGMAP_I2C 1660 select SENSORS_NCT6775_CORE 1661 help 1662 If you say yes here you get support for the hardware monitoring 1663 functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, 1664 NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible 1665 Super-I/O chips via their I2C interface. 1666 1667 If you're not building a kernel for a BMC, this is probably 1668 not the driver you want (see CONFIG_SENSORS_NCT6775). 1669 1670 This driver can also be built as a module. If so, the module 1671 will be called nct6775-i2c. 1672 1673config SENSORS_NCT7802 1674 tristate "Nuvoton NCT7802Y" 1675 depends on I2C 1676 select REGMAP_I2C 1677 help 1678 If you say yes here you get support for the Nuvoton NCT7802Y 1679 hardware monitoring chip. 1680 1681 This driver can also be built as a module. If so, the module 1682 will be called nct7802. 1683 1684config SENSORS_NCT7904 1685 tristate "Nuvoton NCT7904" 1686 depends on I2C && WATCHDOG 1687 select WATCHDOG_CORE 1688 help 1689 If you say yes here you get support for the Nuvoton NCT7904 1690 hardware monitoring chip, including manual fan speed control 1691 and support for the integrated watchdog. 1692 1693 This driver can also be built as a module. If so, the module 1694 will be called nct7904. 1695 1696config SENSORS_NPCM7XX 1697 tristate "Nuvoton NPCM750 and compatible PWM and Fan controllers" 1698 imply THERMAL 1699 help 1700 This driver provides support for Nuvoton NPCM750/730/715/705 PWM 1701 and Fan controllers. 1702 1703 This driver can also be built as a module. If so, the module 1704 will be called npcm750-pwm-fan. 1705 1706config SENSORS_NSA320 1707 tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors" 1708 depends on GPIOLIB && OF 1709 depends on MACH_KIRKWOOD || COMPILE_TEST 1710 help 1711 If you say yes here you get support for hardware monitoring 1712 for the ZyXEL NSA320 Media Server and other compatible devices 1713 (probably the NSA325 and some NSA310 variants). 1714 1715 The sensor data is taken from a Holtek HT46R065 microcontroller 1716 connected to GPIO lines. 1717 1718 This driver can also be built as a module. If so, the module 1719 will be called nsa320-hwmon. 1720 1721config SENSORS_NZXT_KRAKEN2 1722 tristate "NZXT Kraken X42/X51/X62/X72 liquid coolers" 1723 depends on USB_HID 1724 help 1725 If you say yes here you get support for hardware monitoring for the 1726 NZXT Kraken X42/X52/X62/X72 all-in-one CPU liquid coolers. 1727 1728 This driver can also be built as a module. If so, the module 1729 will be called nzxt-kraken2. 1730 1731config SENSORS_NZXT_KRAKEN3 1732 tristate "NZXT Kraken X53/X63/X73, Z53/Z63/Z73 coolers" 1733 depends on USB_HID 1734 help 1735 If you say yes here you get support for hardware monitoring for the 1736 NZXT Kraken X53/X63/X73, Z53/Z63/Z73 all-in-one CPU liquid coolers. 1737 1738 This driver can also be built as a module. If so, the module 1739 will be called nzxt-kraken3. 1740 1741config SENSORS_NZXT_SMART2 1742 tristate "NZXT RGB & Fan Controller/Smart Device v2" 1743 depends on USB_HID 1744 help 1745 If you say yes here you get support for hardware monitoring for the 1746 NZXT RGB & Fan Controller/Smart Device v2. 1747 1748 This driver can also be built as a module. If so, the module 1749 will be called nzxt-smart2. 1750 1751source "drivers/hwmon/occ/Kconfig" 1752 1753config SENSORS_OXP 1754 tristate "OneXPlayer EC fan control" 1755 depends on ACPI 1756 depends on X86 1757 help 1758 If you say yes here you get support for fan readings and control over 1759 OneXPlayer handheld devices. Only OneXPlayer mini AMD handheld variant 1760 boards are supported. 1761 1762 Can also be built as a module. In that case it will be called oxp-sensors. 1763 1764config SENSORS_PCF8591 1765 tristate "Philips PCF8591 ADC/DAC" 1766 depends on I2C 1767 help 1768 If you say yes here you get support for Philips PCF8591 4-channel 1769 ADC, 1-channel DAC chips. 1770 1771 This driver can also be built as a module. If so, the module 1772 will be called pcf8591. 1773 1774 These devices are hard to detect and rarely found on mainstream 1775 hardware. If unsure, say N. 1776 1777source "drivers/hwmon/peci/Kconfig" 1778 1779source "drivers/hwmon/pmbus/Kconfig" 1780 1781config SENSORS_PT5161L 1782 tristate "Astera Labs PT5161L PCIe retimer hardware monitoring" 1783 depends on I2C 1784 help 1785 If you say yes here you get support for temperature monitoring 1786 on the Astera Labs PT5161L PCIe retimer. 1787 1788 This driver can also be built as a module. If so, the module 1789 will be called pt5161l. 1790 1791config SENSORS_PWM_FAN 1792 tristate "PWM fan" 1793 depends on PWM || COMPILE_TEST 1794 depends on THERMAL || THERMAL=n 1795 help 1796 If you say yes here you get support for fans connected to PWM lines. 1797 The driver uses the generic PWM interface, thus it will work on a 1798 variety of SoCs. 1799 1800 This driver can also be built as a module. If so, the module 1801 will be called pwm-fan. 1802 1803config SENSORS_RASPBERRYPI_HWMON 1804 tristate "Raspberry Pi voltage monitor" 1805 depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) 1806 help 1807 If you say yes here you get support for voltage sensor on the 1808 Raspberry Pi. 1809 1810 This driver can also be built as a module. If so, the module 1811 will be called raspberrypi-hwmon. 1812 1813config SENSORS_SL28CPLD 1814 tristate "Kontron sl28cpld hardware monitoring driver" 1815 depends on MFD_SL28CPLD || COMPILE_TEST 1816 help 1817 If you say yes here you get support for the fan supervisor of the 1818 sl28cpld board management controller. 1819 1820 This driver can also be built as a module. If so, the module 1821 will be called sl28cpld-hwmon. 1822 1823config SENSORS_SBTSI 1824 tristate "Emulated SB-TSI temperature sensor" 1825 depends on I2C 1826 help 1827 If you say yes here you get support for emulated temperature 1828 sensors on AMD SoCs with SB-TSI interface connected to a BMC device. 1829 1830 This driver can also be built as a module. If so, the module will 1831 be called sbtsi_temp. 1832 1833config SENSORS_SBRMI 1834 tristate "Emulated SB-RMI sensor" 1835 depends on I2C 1836 help 1837 If you say yes here you get support for emulated RMI 1838 sensors on AMD SoCs with APML interface connected to a BMC device. 1839 1840 This driver can also be built as a module. If so, the module will 1841 be called sbrmi. 1842 1843config SENSORS_SHT15 1844 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." 1845 depends on GPIOLIB || COMPILE_TEST 1846 select BITREVERSE 1847 help 1848 If you say yes here you get support for the Sensiron SHT10, SHT11, 1849 SHT15, SHT71, SHT75 humidity and temperature sensors. 1850 1851 This driver can also be built as a module. If so, the module 1852 will be called sht15. 1853 1854config SENSORS_SHT21 1855 tristate "Sensiron humidity and temperature sensors. SHT21 and compat." 1856 depends on I2C 1857 help 1858 If you say yes here you get support for the Sensiron SHT21, SHT25 1859 humidity and temperature sensors. 1860 1861 This driver can also be built as a module. If so, the module 1862 will be called sht21. 1863 1864config SENSORS_SHT3x 1865 tristate "Sensiron humidity and temperature sensors. SHT3x and compat." 1866 depends on I2C 1867 select CRC8 1868 help 1869 If you say yes here you get support for the Sensiron SHT30 and SHT31 1870 humidity and temperature sensors. 1871 1872 This driver can also be built as a module. If so, the module 1873 will be called sht3x. 1874 1875config SENSORS_SHT4x 1876 tristate "Sensiron humidity and temperature sensors. SHT4x and compat." 1877 depends on I2C 1878 select CRC8 1879 help 1880 If you say yes here you get support for the Sensiron SHT40, SHT41 and 1881 SHT45 humidity and temperature sensors. 1882 1883 This driver can also be built as a module. If so, the module 1884 will be called sht4x. 1885 1886config SENSORS_SHTC1 1887 tristate "Sensiron humidity and temperature sensors. SHTC1 and compat." 1888 depends on I2C 1889 help 1890 If you say yes here you get support for the Sensiron SHTC1, SHTW1, 1891 and SHTC3 humidity and temperature sensors. 1892 1893 This driver can also be built as a module. If so, the module 1894 will be called shtc1. 1895 1896config SENSORS_SIS5595 1897 tristate "Silicon Integrated Systems Corp. SiS5595" 1898 depends on PCI && HAS_IOPORT 1899 help 1900 If you say yes here you get support for the integrated sensors in 1901 SiS5595 South Bridges. 1902 1903 This driver can also be built as a module. If so, the module 1904 will be called sis5595. 1905 1906config SENSORS_SY7636A 1907 tristate "Silergy SY7636A" 1908 depends on MFD_SY7636A 1909 help 1910 If you say yes here you get support for the thermistor readout of 1911 the Silergy SY7636A PMIC. 1912 1913 This driver can also be built as a module. If so, the module 1914 will be called sy7636a-hwmon. 1915 1916config SENSORS_DME1737 1917 tristate "SMSC DME1737, SCH311x and compatibles" 1918 depends on HAS_IOPORT 1919 depends on I2C && !PPC 1920 select HWMON_VID 1921 help 1922 If you say yes here you get support for the hardware monitoring 1923 and fan control features of the SMSC DME1737, SCH311x, SCH5027, and 1924 Asus A8000 Super-I/O chips. 1925 1926 This driver can also be built as a module. If so, the module 1927 will be called dme1737. 1928 1929config SENSORS_EMC1403 1930 tristate "SMSC EMC1403/23 thermal sensor" 1931 depends on I2C 1932 select REGMAP_I2C 1933 help 1934 If you say yes here you get support for the SMSC EMC1403/23 1935 temperature monitoring chip. 1936 1937 Threshold values can be configured using sysfs. 1938 Data from the different diodes are accessible via sysfs. 1939 1940config SENSORS_EMC2103 1941 tristate "SMSC EMC2103" 1942 depends on I2C 1943 help 1944 If you say yes here you get support for the temperature 1945 and fan sensors of the SMSC EMC2103 chips. 1946 1947 This driver can also be built as a module. If so, the module 1948 will be called emc2103. 1949 1950config SENSORS_EMC2305 1951 tristate "Microchip EMC2305 and compatible EMC2301/2/3" 1952 depends on I2C 1953 imply THERMAL 1954 help 1955 If you say yes here you get support for the Microchip EMC2305 1956 fan controller chips. 1957 The Microchip EMC2305 is a fan controller for up to 5 fans. 1958 Fan rotation speeds are reported in RPM. 1959 1960 This driver can also be built as a module. If so, the module 1961 will be called emc2305. 1962 1963config SENSORS_EMC6W201 1964 tristate "SMSC EMC6W201" 1965 depends on I2C 1966 help 1967 If you say yes here you get support for the SMSC EMC6W201 1968 hardware monitoring chip. 1969 1970 This driver can also be built as a module. If so, the module 1971 will be called emc6w201. 1972 1973config SENSORS_SMSC47M1 1974 tristate "SMSC LPC47M10x and compatibles" 1975 depends on HAS_IOPORT 1976 depends on !PPC 1977 help 1978 If you say yes here you get support for the integrated fan 1979 monitoring and control capabilities of the SMSC LPC47B27x, 1980 LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x, 1981 LPC47M192, LPC47M292 and LPC47M997 chips. 1982 1983 The temperature and voltage sensor features of the LPC47M15x, 1984 LPC47M192, LPC47M292 and LPC47M997 are supported by another 1985 driver, select also "SMSC LPC47M192 and compatibles" below for 1986 those. 1987 1988 This driver can also be built as a module. If so, the module 1989 will be called smsc47m1. 1990 1991config SENSORS_SMSC47M192 1992 tristate "SMSC LPC47M192 and compatibles" 1993 depends on I2C 1994 select HWMON_VID 1995 help 1996 If you say yes here you get support for the temperature and 1997 voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292 1998 and LPC47M997 chips. 1999 2000 The fan monitoring and control capabilities of these chips 2001 are supported by another driver, select 2002 "SMSC LPC47M10x and compatibles" above. You need both drivers 2003 if you want fan control and voltage/temperature sensor support. 2004 2005 This driver can also be built as a module. If so, the module 2006 will be called smsc47m192. 2007 2008config SENSORS_SMSC47B397 2009 tristate "SMSC LPC47B397-NC" 2010 depends on HAS_IOPORT 2011 depends on !PPC 2012 help 2013 If you say yes here you get support for the SMSC LPC47B397-NC 2014 sensor chip. 2015 2016 This driver can also be built as a module. If so, the module 2017 will be called smsc47b397. 2018 2019config SENSORS_SCH56XX_COMMON 2020 tristate 2021 select REGMAP 2022 2023config SENSORS_SCH5627 2024 tristate "SMSC SCH5627" 2025 depends on HAS_IOPORT 2026 depends on !PPC && WATCHDOG 2027 select SENSORS_SCH56XX_COMMON 2028 select WATCHDOG_CORE 2029 help 2030 If you say yes here you get support for the hardware monitoring 2031 features of the SMSC SCH5627 Super-I/O chip including support for 2032 the integrated watchdog. 2033 2034 This driver can also be built as a module. If so, the module 2035 will be called sch5627. 2036 2037config SENSORS_SCH5636 2038 tristate "SMSC SCH5636" 2039 depends on HAS_IOPORT 2040 depends on !PPC && WATCHDOG 2041 select SENSORS_SCH56XX_COMMON 2042 select WATCHDOG_CORE 2043 help 2044 SMSC SCH5636 Super I/O chips include an embedded microcontroller for 2045 hardware monitoring solutions, allowing motherboard manufacturers to 2046 create their own custom hwmon solution based upon the SCH5636. 2047 2048 Currently this driver only supports the Fujitsu Theseus SCH5636 based 2049 hwmon solution. Say yes here if you want support for the Fujitsu 2050 Theseus' hardware monitoring features including support for the 2051 integrated watchdog. 2052 2053 This driver can also be built as a module. If so, the module 2054 will be called sch5636. 2055 2056config SENSORS_STTS751 2057 tristate "ST Microelectronics STTS751" 2058 depends on I2C 2059 help 2060 If you say yes here you get support for STTS751 2061 temperature sensor chips. 2062 2063 This driver can also be built as a module. If so, the module 2064 will be called stts751. 2065 2066config SENSORS_SFCTEMP 2067 tristate "Starfive JH71x0 temperature sensor" 2068 depends on ARCH_STARFIVE || COMPILE_TEST 2069 help 2070 If you say yes here you get support for temperature sensor 2071 on the Starfive JH71x0 SoCs. 2072 2073 This driver can also be built as a module. If so, the module 2074 will be called sfctemp. 2075 2076config SENSORS_SG2042_MCU 2077 tristate "Sophgo onboard MCU support" 2078 depends on I2C 2079 depends on ARCH_SOPHGO || COMPILE_TEST 2080 help 2081 Support for onboard MCU of Sophgo SG2042 SoCs. This mcu provides 2082 power control and some basic information. 2083 2084 This driver can be built as a module. If so, the module 2085 will be called sg2042-mcu. 2086 2087config SENSORS_SURFACE_FAN 2088 tristate "Surface Fan Driver" 2089 depends on SURFACE_AGGREGATOR 2090 depends on SURFACE_AGGREGATOR_BUS 2091 help 2092 Driver that provides monitoring of the fan on Surface Pro devices that 2093 have a fan, like the Surface Pro 9. 2094 2095 This makes the fan's current speed accessible through the hwmon 2096 system. It does not provide control over the fan, the firmware is 2097 responsible for that, this driver merely provides monitoring. 2098 2099 Select M or Y here, if you want to be able to read the fan's speed. 2100 2101config SENSORS_SURFACE_TEMP 2102 tristate "Microsoft Surface Thermal Sensor Driver" 2103 depends on SURFACE_AGGREGATOR 2104 depends on SURFACE_AGGREGATOR_BUS 2105 help 2106 Driver for monitoring thermal sensors connected via the Surface 2107 Aggregator Module (embedded controller) on Microsoft Surface devices. 2108 2109 This driver can also be built as a module. If so, the module 2110 will be called surface_temp. 2111 2112config SENSORS_ADC128D818 2113 tristate "Texas Instruments ADC128D818" 2114 depends on I2C 2115 help 2116 If you say yes here you get support for the Texas Instruments 2117 ADC128D818 System Monitor with Temperature Sensor chip. 2118 2119 This driver can also be built as a module. If so, the module 2120 will be called adc128d818. 2121 2122config SENSORS_ADS7828 2123 tristate "Texas Instruments ADS7828 and compatibles" 2124 depends on I2C 2125 select REGMAP_I2C 2126 help 2127 If you say yes here you get support for Texas Instruments ADS7828 and 2128 ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while 2129 it is 8-bit on ADS7830. 2130 2131 This driver can also be built as a module. If so, the module 2132 will be called ads7828. 2133 2134config SENSORS_ADS7871 2135 tristate "Texas Instruments ADS7871 A/D converter" 2136 depends on SPI 2137 help 2138 If you say yes here you get support for TI ADS7871 & ADS7870 2139 2140 This driver can also be built as a module. If so, the module 2141 will be called ads7871. 2142 2143config SENSORS_AMC6821 2144 tristate "Texas Instruments AMC6821" 2145 depends on I2C 2146 select REGMAP_I2C 2147 help 2148 If you say yes here you get support for the Texas Instruments 2149 AMC6821 hardware monitoring chips. 2150 2151 This driver can also be built as a module. If so, the module 2152 will be called amc6821. 2153 2154config SENSORS_INA209 2155 tristate "TI / Burr Brown INA209" 2156 depends on I2C 2157 help 2158 If you say yes here you get support for the TI / Burr Brown INA209 2159 voltage / current / power monitor I2C interface. 2160 2161 This driver can also be built as a module. If so, the module will 2162 be called ina209. 2163 2164config SENSORS_INA2XX 2165 tristate "Texas Instruments INA219 and compatibles" 2166 depends on I2C 2167 select REGMAP_I2C 2168 help 2169 If you say yes here you get support for INA219, INA220, INA226, 2170 INA230, and INA231 power monitor chips. 2171 2172 The INA2xx driver is configured for the default configuration of 2173 the part as described in the datasheet. 2174 Default value for Rshunt is 10 mOhms. 2175 This driver can also be built as a module. If so, the module 2176 will be called ina2xx. 2177 2178config SENSORS_INA238 2179 tristate "Texas Instruments INA238" 2180 depends on I2C 2181 select REGMAP_I2C 2182 help 2183 If you say yes here you get support for the INA238 power monitor 2184 chip. This driver supports voltage, current, power and temperature 2185 measurements as well as alarm configuration. 2186 2187 This driver can also be built as a module. If so, the module 2188 will be called ina238. 2189 2190config SENSORS_INA3221 2191 tristate "Texas Instruments INA3221 Triple Power Monitor" 2192 depends on I2C 2193 select REGMAP_I2C 2194 help 2195 If you say yes here you get support for the TI INA3221 Triple Power 2196 Monitor. 2197 2198 This driver can also be built as a module. If so, the module 2199 will be called ina3221. 2200 2201config SENSORS_SPD5118 2202 tristate "SPD5118 Compliant Temperature Sensors" 2203 depends on I2C 2204 select REGMAP_I2C 2205 help 2206 If you say yes here you get support for SPD5118 (JEDEC JESD300) 2207 compliant temperature sensors. Such sensors are found on DDR5 memory 2208 modules. 2209 2210 This driver can also be built as a module. If so, the module 2211 will be called spd5118. 2212 2213config SENSORS_SPD5118_DETECT 2214 bool "Enable detect function" 2215 depends on SENSORS_SPD5118 2216 default (!DMI || !X86) 2217 help 2218 If enabled, the driver auto-detects if a chip in the SPD address 2219 range is compliant to the SPD51888 standard and auto-instantiates 2220 if that is the case. If disabled, SPD5118 compliant devices have 2221 to be instantiated by other means. On X86 systems with DMI support 2222 this will typically be done from DMI DDR detection code in the 2223 I2C SMBus subsystem. Devicetree based systems will instantiate 2224 attached devices if the DIMMs are listed in the devicetree file. 2225 2226 Disabling the detect function will speed up boot time and reduce 2227 the risk of mis-detecting SPD5118 compliant devices. However, it 2228 may result in missed DIMMs under some circumstances. 2229 2230 If unsure, say Y. 2231 2232config SENSORS_TC74 2233 tristate "Microchip TC74" 2234 depends on I2C 2235 help 2236 If you say yes here you get support for Microchip TC74 single 2237 input temperature sensor chips. 2238 2239 This driver can also be built as a module. If so, the module 2240 will be called tc74. 2241 2242config SENSORS_THMC50 2243 tristate "Texas Instruments THMC50 / Analog Devices ADM1022" 2244 depends on I2C 2245 help 2246 If you say yes here you get support for Texas Instruments THMC50 2247 sensor chips and clones: the Analog Devices ADM1022. 2248 2249 This driver can also be built as a module. If so, the module 2250 will be called thmc50. 2251 2252config SENSORS_TMP102 2253 tristate "Texas Instruments TMP102" 2254 depends on I2C 2255 select REGMAP_I2C 2256 help 2257 If you say yes here you get support for Texas Instruments TMP102 2258 sensor chips. 2259 2260 This driver can also be built as a module. If so, the module 2261 will be called tmp102. 2262 2263config SENSORS_TMP103 2264 tristate "Texas Instruments TMP103" 2265 depends on I2C 2266 select REGMAP_I2C 2267 help 2268 If you say yes here you get support for Texas Instruments TMP103 2269 sensor chips. 2270 2271 This driver can also be built as a module. If so, the module 2272 will be called tmp103. 2273 2274config SENSORS_TMP108 2275 tristate "Texas Instruments TMP108" 2276 depends on I2C 2277 select REGMAP_I2C 2278 help 2279 If you say yes here you get support for Texas Instruments TMP108 2280 sensor chips. 2281 2282 This driver can also be built as a module. If so, the module 2283 will be called tmp108. 2284 2285config SENSORS_TMP401 2286 tristate "Texas Instruments TMP401 and compatibles" 2287 depends on I2C 2288 select REGMAP 2289 help 2290 If you say yes here you get support for Texas Instruments TMP401, 2291 TMP411, TMP431, TMP432, and TMP435 temperature sensor chips. 2292 2293 This driver can also be built as a module. If so, the module 2294 will be called tmp401. 2295 2296config SENSORS_TMP421 2297 tristate "Texas Instruments TMP421 and compatible" 2298 depends on I2C 2299 help 2300 If you say yes here you get support for Texas Instruments TMP421, 2301 TMP422, TMP423, TMP441, and TMP442 temperature sensor chips. 2302 2303 This driver can also be built as a module. If so, the module 2304 will be called tmp421. 2305 2306config SENSORS_TMP464 2307 tristate "Texas Instruments TMP464 and compatible" 2308 depends on I2C 2309 select REGMAP_I2C 2310 help 2311 If you say yes here you get support for Texas Instruments TMP464 2312 and TMP468 temperature sensor chips. 2313 2314 This driver can also be built as a module. If so, the module 2315 will be called tmp464. 2316 2317config SENSORS_TMP513 2318 tristate "Texas Instruments TMP513 and compatibles" 2319 depends on I2C 2320 select REGMAP_I2C 2321 help 2322 If you say yes here you get support for Texas Instruments TMP512, 2323 and TMP513 temperature and power supply sensor chips. 2324 2325 This driver can also be built as a module. If so, the module 2326 will be called tmp513. 2327 2328config SENSORS_VEXPRESS 2329 tristate "Versatile Express" 2330 depends on VEXPRESS_CONFIG 2331 help 2332 This driver provides support for hardware sensors available on 2333 the ARM Ltd's Versatile Express platform. It can provide wide 2334 range of information like temperature, power, energy. 2335 2336config SENSORS_VIA_CPUTEMP 2337 tristate "VIA CPU temperature sensor" 2338 depends on X86 2339 select HWMON_VID 2340 help 2341 If you say yes here you get support for the temperature 2342 sensor inside your CPU. Supported are all known variants of 2343 the VIA C7 and Nano. 2344 2345config SENSORS_VIA686A 2346 tristate "VIA686A" 2347 depends on PCI && HAS_IOPORT 2348 help 2349 If you say yes here you get support for the integrated sensors in 2350 Via 686A/B South Bridges. 2351 2352 This driver can also be built as a module. If so, the module 2353 will be called via686a. 2354 2355config SENSORS_VT1211 2356 tristate "VIA VT1211" 2357 depends on HAS_IOPORT 2358 depends on !PPC 2359 select HWMON_VID 2360 help 2361 If you say yes here then you get support for hardware monitoring 2362 features of the VIA VT1211 Super-I/O chip. 2363 2364 This driver can also be built as a module. If so, the module 2365 will be called vt1211. 2366 2367config SENSORS_VT8231 2368 tristate "VIA VT8231" 2369 depends on PCI && HAS_IOPORT 2370 select HWMON_VID 2371 help 2372 If you say yes here then you get support for the integrated sensors 2373 in the VIA VT8231 device. 2374 2375 This driver can also be built as a module. If so, the module 2376 will be called vt8231. 2377 2378config SENSORS_W83773G 2379 tristate "Nuvoton W83773G" 2380 depends on I2C 2381 select REGMAP_I2C 2382 help 2383 If you say yes here you get support for the Nuvoton W83773G hardware 2384 monitoring chip. 2385 2386 This driver can also be built as a module. If so, the module 2387 will be called w83773g. 2388 2389config SENSORS_W83781D 2390 tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F" 2391 depends on I2C 2392 select HWMON_VID 2393 help 2394 If you say yes here you get support for the Winbond W8378x series 2395 of sensor chips: the W83781D, W83782D and W83783S, and the similar 2396 Asus AS99127F. 2397 2398 This driver can also be built as a module. If so, the module 2399 will be called w83781d. 2400 2401config SENSORS_W83791D 2402 tristate "Winbond W83791D" 2403 depends on I2C 2404 select HWMON_VID 2405 help 2406 If you say yes here you get support for the Winbond W83791D chip. 2407 2408 This driver can also be built as a module. If so, the module 2409 will be called w83791d. 2410 2411config SENSORS_W83792D 2412 tristate "Winbond W83792D" 2413 depends on I2C 2414 help 2415 If you say yes here you get support for the Winbond W83792D chip. 2416 2417 This driver can also be built as a module. If so, the module 2418 will be called w83792d. 2419 2420config SENSORS_W83793 2421 tristate "Winbond W83793" 2422 depends on I2C 2423 select HWMON_VID 2424 help 2425 If you say yes here you get support for the Winbond W83793 2426 hardware monitoring chip, including support for the integrated 2427 watchdog. 2428 2429 This driver can also be built as a module. If so, the module 2430 will be called w83793. 2431 2432config SENSORS_W83795 2433 tristate "Winbond/Nuvoton W83795G/ADG" 2434 depends on I2C 2435 help 2436 If you say yes here you get support for the Winbond W83795G and 2437 W83795ADG hardware monitoring chip, including manual fan speed 2438 control. 2439 2440 This driver can also be built as a module. If so, the module 2441 will be called w83795. 2442 2443config SENSORS_W83795_FANCTRL 2444 bool "Include automatic fan control support" 2445 depends on SENSORS_W83795 2446 help 2447 If you say yes here, support for automatic fan speed control 2448 will be included in the driver. 2449 2450 Please also note that this option will create sysfs attribute 2451 files which may change in the future, so you shouldn't rely 2452 on them being stable. 2453 2454config SENSORS_W83L785TS 2455 tristate "Winbond W83L785TS-S" 2456 depends on I2C 2457 help 2458 If you say yes here you get support for the Winbond W83L785TS-S 2459 sensor chip, which is used on the Asus A7N8X, among other 2460 motherboards. 2461 2462 This driver can also be built as a module. If so, the module 2463 will be called w83l785ts. 2464 2465config SENSORS_W83L786NG 2466 tristate "Winbond W83L786NG, W83L786NR" 2467 depends on I2C 2468 help 2469 If you say yes here you get support for the Winbond W83L786NG 2470 and W83L786NR sensor chips. 2471 2472 This driver can also be built as a module. If so, the module 2473 will be called w83l786ng. 2474 2475config SENSORS_W83627HF 2476 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" 2477 depends on HAS_IOPORT 2478 depends on !PPC 2479 select HWMON_VID 2480 help 2481 If you say yes here you get support for the Winbond W836X7 series 2482 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and 2483 W83697HF. 2484 2485 This driver can also be built as a module. If so, the module 2486 will be called w83627hf. 2487 2488config SENSORS_W83627EHF 2489 tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG" 2490 depends on HAS_IOPORT 2491 depends on !PPC 2492 select HWMON_VID 2493 help 2494 If you say yes here you get support for the hardware 2495 monitoring functionality of the Winbond W83627EHF Super-I/O chip. 2496 2497 This driver also supports the W83627EHG, which is the lead-free 2498 version of the W83627EHF, and the W83627DHG, which is a similar 2499 chip suited for specific Intel processors that use PECI such as 2500 the Core 2 Duo. And also the W83627UHG, which is a stripped down 2501 version of the W83627DHG (as far as hardware monitoring goes.) 2502 2503 This driver also supports Nuvoton W83667HG and W83667HG-B. 2504 2505 This driver can also be built as a module. If so, the module 2506 will be called w83627ehf. 2507 2508config SENSORS_WM831X 2509 tristate "WM831x PMICs" 2510 depends on MFD_WM831X 2511 help 2512 If you say yes here you get support for the hardware 2513 monitoring functionality of the Wolfson Microelectronics 2514 WM831x series of PMICs. 2515 2516 This driver can also be built as a module. If so, the module 2517 will be called wm831x-hwmon. 2518 2519config SENSORS_WM8350 2520 tristate "Wolfson Microelectronics WM835x" 2521 depends on MFD_WM8350 2522 help 2523 If you say yes here you get support for the hardware 2524 monitoring features of the WM835x series of PMICs. 2525 2526 This driver can also be built as a module. If so, the module 2527 will be called wm8350-hwmon. 2528 2529config SENSORS_ULTRA45 2530 tristate "Sun Ultra45 PIC16F747" 2531 depends on SPARC64 2532 help 2533 This driver provides support for the Ultra45 workstation environmental 2534 sensors. 2535 2536config SENSORS_XGENE 2537 tristate "APM X-Gene SoC hardware monitoring driver" 2538 depends on XGENE_SLIMPRO_MBOX || PCC 2539 help 2540 If you say yes here you get support for the temperature 2541 and power sensors for APM X-Gene SoC. 2542 2543config SENSORS_INTEL_M10_BMC_HWMON 2544 tristate "Intel MAX10 BMC Hardware Monitoring" 2545 depends on MFD_INTEL_M10_BMC_CORE 2546 help 2547 This driver provides support for the hardware monitoring functionality 2548 on Intel MAX10 BMC chip. 2549 2550 This BMC Chip is used on Intel FPGA PCIe Acceleration Cards (PAC). Its 2551 sensors monitor various telemetry data of different components on the 2552 card, e.g. board temperature, FPGA core temperature/voltage/current. 2553 2554if ACPI 2555 2556comment "ACPI drivers" 2557 2558config SENSORS_ACPI_POWER 2559 tristate "ACPI 4.0 power meter" 2560 help 2561 This driver exposes ACPI 4.0 power meters as hardware monitoring 2562 devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware 2563 and a power meter. 2564 2565 To compile this driver as a module, choose M here: 2566 the module will be called acpi_power_meter. 2567 2568config SENSORS_ATK0110 2569 tristate "ASUS ATK0110" 2570 depends on X86 2571 help 2572 If you say yes here you get support for the ACPI hardware 2573 monitoring interface found in many ASUS motherboards. This 2574 driver will provide readings of fans, voltages and temperatures 2575 through the system firmware. 2576 2577 This driver can also be built as a module. If so, the module 2578 will be called asus_atk0110. 2579 2580config SENSORS_ASUS_WMI 2581 tristate "ASUS WMI X370/X470/B450/X399" 2582 depends on ACPI_WMI 2583 help 2584 If you say yes here you get support for the ACPI hardware monitoring 2585 interface found in X370/X470/B450/X399 ASUS motherboards. This driver 2586 will provide readings of fans, voltages and temperatures through the system 2587 firmware. 2588 2589 This driver can also be built as a module. If so, the module 2590 will be called asus_wmi_sensors. 2591 2592config SENSORS_ASUS_EC 2593 tristate "ASUS EC Sensors" 2594 depends on X86 2595 help 2596 If you say yes here you get support for the ACPI embedded controller 2597 hardware monitoring interface found in ASUS motherboards. The driver 2598 currently supports B550/X570 boards, although other ASUS boards might 2599 provide this monitoring interface as well. 2600 2601 This driver can also be built as a module. If so, the module 2602 will be called asus_ec_sensors. 2603 2604config SENSORS_HP_WMI 2605 tristate "HP WMI Sensors" 2606 depends on ACPI_WMI 2607 help 2608 If you say yes here you get support for the ACPI hardware monitoring 2609 interface found in HP (and some HP Compaq) business-class computers. 2610 Available sensors vary between systems. Temperature and fan speed 2611 sensors are the most common. 2612 2613 This driver can also be built as a module. If so, the module 2614 will be called hp_wmi_sensors. 2615 2616endif # ACPI 2617 2618endif # HWMON 2619