1# SPDX-License-Identifier: GPL-2.0-only 2menu "Platform selection" 3 4config ARCH_ACTIONS 5 bool "Actions Semi Platforms" 6 select OWL_TIMER 7 select PINCTRL 8 help 9 This enables support for the Actions Semiconductor S900 SoC family. 10 11config ARCH_AIROHA 12 bool "Airoha SoC Support" 13 select ARM_PSCI 14 select HAVE_ARM_ARCH_TIMER 15 help 16 This enables support for the ARM64 based Airoha SoCs. 17 18config ARCH_SUNXI 19 bool "Allwinner sunxi 64-bit SoC Family" 20 select ARCH_HAS_RESET_CONTROLLER 21 select PINCTRL 22 select RESET_CONTROLLER 23 select SUN4I_TIMER 24 select SUN6I_R_INTC 25 select SUNXI_NMI_INTC 26 help 27 This enables support for Allwinner sunxi based SoCs like the A64. 28 29config ARCH_ALPINE 30 bool "Annapurna Labs Alpine platform" 31 select ALPINE_MSI if PCI 32 help 33 This enables support for the Annapurna Labs Alpine 34 Soc family. 35 36config ARCH_APPLE 37 bool "Apple Silicon SoC family" 38 select APPLE_AIC 39 help 40 This enables support for Apple's in-house ARM SoC family, starting 41 with the Apple M1. 42 43menuconfig ARCH_BCM 44 bool "Broadcom SoC Support" 45 46if ARCH_BCM 47 48config ARCH_BCM2835 49 bool "Broadcom BCM2835 family" 50 select TIMER_OF 51 select GPIOLIB 52 select MFD_CORE 53 select PINCTRL 54 select PINCTRL_BCM2835 55 select ARM_AMBA 56 select ARM_GIC 57 select ARM_TIMER_SP804 58 help 59 This enables support for the Broadcom BCM2837 and BCM2711 SoC. 60 These SoCs are used in the Raspberry Pi 3 and 4 devices. 61 62config ARCH_BCM_IPROC 63 bool "Broadcom iProc SoC Family" 64 select COMMON_CLK_IPROC 65 select GPIOLIB 66 select PINCTRL 67 help 68 This enables support for Broadcom iProc based SoCs 69 70config ARCH_BCMBCA 71 bool "Broadcom Broadband Carrier Access (BCA) origin SoC" 72 select GPIOLIB 73 help 74 Say Y if you intend to run the kernel on a Broadcom Broadband ARM-based 75 BCA chipset. 76 77 This enables support for Broadcom BCA ARM-based broadband chipsets, 78 including the DSL, PON and Wireless family of chips. 79 80config ARCH_BRCMSTB 81 bool "Broadcom Set-Top-Box SoCs" 82 select ARCH_HAS_RESET_CONTROLLER 83 select GENERIC_IRQ_CHIP 84 select PINCTRL 85 help 86 This enables support for Broadcom's ARMv8 Set Top Box SoCs 87 88endif 89 90config ARCH_BERLIN 91 bool "Marvell Berlin SoC Family" 92 select DW_APB_ICTL 93 select DW_APB_TIMER_OF 94 select GPIOLIB 95 select PINCTRL 96 help 97 This enables support for Marvell Berlin SoC Family 98 99config ARCH_BITMAIN 100 bool "Bitmain SoC Platforms" 101 help 102 This enables support for the Bitmain SoC Family. 103 104config ARCH_EXYNOS 105 bool "Samsung Exynos SoC family" 106 select COMMON_CLK_SAMSUNG 107 select CLKSRC_EXYNOS_MCT 108 select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS 109 select EXYNOS_PMU 110 select PINCTRL 111 select PINCTRL_EXYNOS 112 select PM_GENERIC_DOMAINS if PM 113 select SOC_SAMSUNG 114 help 115 This enables support for ARMv8 based Samsung Exynos SoC family. 116 117config ARCH_SPARX5 118 bool "Microchip Sparx5 SoC family" 119 select PINCTRL 120 select DW_APB_TIMER_OF 121 help 122 This enables support for the Microchip Sparx5 ARMv8-based 123 SoC family of TSN-capable gigabit switches. 124 125 The SparX-5 Ethernet switch family provides a rich set of 126 switching features such as advanced TCAM-based VLAN and QoS 127 processing enabling delivery of differentiated services, and 128 security through TCAM-based frame processing using versatile 129 content aware processor (VCAP). 130 131config ARCH_K3 132 bool "Texas Instruments Inc. K3 multicore SoC architecture" 133 select PM_GENERIC_DOMAINS if PM 134 select MAILBOX 135 select SOC_TI 136 select TI_MESSAGE_MANAGER 137 select TI_SCI_PROTOCOL 138 select TI_SCI_INTR_IRQCHIP 139 select TI_SCI_INTA_IRQCHIP 140 select TI_K3_SOCINFO 141 help 142 This enables support for Texas Instruments' K3 multicore SoC 143 architecture. 144 145config ARCH_LG1K 146 bool "LG Electronics LG1K SoC Family" 147 help 148 This enables support for LG Electronics LG1K SoC Family 149 150config ARCH_HISI 151 bool "Hisilicon SoC Family" 152 select ARM_TIMER_SP804 153 select HISILICON_IRQ_MBIGEN if PCI 154 select PINCTRL 155 help 156 This enables support for Hisilicon ARMv8 SoC family 157 158config ARCH_KEEMBAY 159 bool "Keem Bay SoC" 160 help 161 This enables support for Intel Movidius SoC code-named Keem Bay. 162 163config ARCH_MEDIATEK 164 bool "MediaTek SoC Family" 165 select ARM_GIC 166 select PINCTRL 167 select MTK_TIMER 168 help 169 This enables support for MediaTek MT27xx, MT65xx, MT76xx 170 & MT81xx ARMv8 SoCs 171 172config ARCH_MESON 173 bool "Amlogic Platforms" 174 help 175 This enables support for the arm64 based Amlogic SoCs 176 such as the s905, S905X/D, S912, A113X/D or S905X/D2 177 178config ARCH_MVEBU 179 bool "Marvell EBU SoC Family" 180 select ARMADA_AP806_SYSCON 181 select ARMADA_CP110_SYSCON 182 select ARMADA_37XX_CLK 183 select GPIOLIB 184 select GPIOLIB_IRQCHIP 185 select MVEBU_GICP 186 select MVEBU_ICU 187 select MVEBU_ODMI 188 select MVEBU_PIC 189 select MVEBU_SEI 190 select OF_GPIO 191 select PINCTRL 192 select PINCTRL_ARMADA_37XX 193 select PINCTRL_ARMADA_AP806 194 select PINCTRL_ARMADA_CP110 195 select PINCTRL_AC5 196 help 197 This enables support for Marvell EBU family, including: 198 - Armada 3700 SoC Family 199 - Armada 7K SoC Family 200 - Armada 8K SoC Family 201 - 98DX2530 SoC Family 202 203menuconfig ARCH_NXP 204 bool "NXP SoC support" 205 206if ARCH_NXP 207 208config ARCH_LAYERSCAPE 209 bool "Freescale Layerscape SoC family" 210 help 211 This enables support for the Freescale Layerscape SoC family. 212 213config ARCH_MXC 214 bool "NXP i.MX SoC family" 215 select ARM64_ERRATUM_843419 216 select ARM64_ERRATUM_845719 if COMPAT 217 select IMX_GPCV2 218 select IMX_GPCV2_PM_DOMAINS 219 select PM 220 select PM_GENERIC_DOMAINS 221 select SOC_BUS 222 select TIMER_IMX_SYS_CTR 223 help 224 This enables support for the ARMv8 based SoCs in the 225 NXP i.MX family. 226 227config ARCH_S32 228 bool "NXP S32 SoC Family" 229 help 230 This enables support for the NXP S32 family of processors. 231 232endif 233 234config ARCH_MA35 235 bool "Nuvoton MA35 Architecture" 236 select GPIOLIB 237 select PINCTRL 238 select RESET_CONTROLLER 239 help 240 This enables support for the ARMv8 based Nuvoton MA35 series SoCs. 241 242config ARCH_NPCM 243 bool "Nuvoton NPCM Architecture" 244 select PINCTRL 245 select GPIOLIB 246 select NPCM7XX_TIMER 247 select RESET_CONTROLLER 248 select MFD_SYSCON 249 help 250 General support for NPCM8xx BMC (Arbel). 251 Nuvoton NPCM8xx BMC based on the Cortex A35. 252 253config ARCH_PENSANDO 254 bool "AMD Pensando Platforms" 255 help 256 This enables support for the ARMv8 based AMD Pensando SoC 257 family to include the Elba SoC. 258 259 AMD Pensando SoCs support a range of Distributed Services 260 Cards in PCIe format installed into servers. The Elba 261 SoC includes 16 Cortex A-72 CPU cores, 144 P4-programmable 262 cores for a minimal latency/jitter datapath, and network 263 interfaces up to 200 Gb/s. 264 265config ARCH_QCOM 266 bool "Qualcomm Platforms" 267 select GPIOLIB 268 select PINCTRL 269 select HAVE_PWRCTL if PCI 270 help 271 This enables support for the ARMv8 based Qualcomm chipsets. 272 273config ARCH_REALTEK 274 bool "Realtek Platforms" 275 select RESET_CONTROLLER 276 help 277 This enables support for the ARMv8 based Realtek chipsets, 278 like the RTD1295. 279 280config ARCH_RENESAS 281 bool "Renesas SoC Platforms" 282 help 283 This enables support for the ARMv8 based Renesas SoCs. 284 285config ARCH_ROCKCHIP 286 bool "Rockchip Platforms" 287 select ARCH_HAS_RESET_CONTROLLER 288 select PINCTRL 289 select PM 290 select ROCKCHIP_TIMER 291 help 292 This enables support for the ARMv8 based Rockchip chipsets, 293 like the RK3368. 294 295config ARCH_SEATTLE 296 bool "AMD Seattle SoC Family" 297 help 298 This enables support for AMD Seattle SOC Family 299 300config ARCH_INTEL_SOCFPGA 301 bool "Intel's SoCFPGA ARMv8 Families" 302 help 303 This enables support for Intel's SoCFPGA ARMv8 families: 304 Stratix 10 (ex. Altera), Stratix10 Software Virtual Platform, 305 Agilex and eASIC N5X. 306 307config ARCH_STM32 308 bool "STMicroelectronics STM32 SoC Family" 309 select GPIOLIB 310 select PINCTRL 311 select PINCTRL_STM32MP257 312 select ARM_SMC_MBOX 313 select ARM_SCMI_PROTOCOL 314 select REGULATOR 315 select REGULATOR_ARM_SCMI 316 select COMMON_CLK_SCMI 317 select STM32_FIREWALL 318 help 319 This enables support for ARMv8 based STMicroelectronics 320 STM32 family, including: 321 - STM32MP25: 322 - STM32MP251, STM32MP253, STM32MP255 and STM32MP257. 323 324config ARCH_SYNQUACER 325 bool "Socionext SynQuacer SoC Family" 326 select IRQ_FASTEOI_HIERARCHY_HANDLERS 327 328config ARCH_TEGRA 329 bool "NVIDIA Tegra SoC Family" 330 select ARCH_HAS_RESET_CONTROLLER 331 select ARM_GIC_PM 332 select CLKSRC_MMIO 333 select TIMER_OF 334 select GPIOLIB 335 select PINCTRL 336 select PM 337 select PM_GENERIC_DOMAINS 338 select RESET_CONTROLLER 339 help 340 This enables support for the NVIDIA Tegra SoC family. 341 342config ARCH_TESLA_FSD 343 bool "Tesla platform" 344 depends on ARCH_EXYNOS 345 help 346 Support for ARMv8 based Tesla platforms. 347 348config ARCH_SPRD 349 bool "Spreadtrum SoC platform" 350 help 351 Support for Spreadtrum ARM based SoCs 352 353config ARCH_THUNDER 354 bool "Cavium Inc. Thunder SoC Family" 355 help 356 This enables support for Cavium's Thunder Family of SoCs. 357 358config ARCH_THUNDER2 359 bool "Cavium ThunderX2 Server Processors" 360 select GPIOLIB 361 help 362 This enables support for Cavium's ThunderX2 CN99XX family of 363 server processors. 364 365config ARCH_UNIPHIER 366 bool "Socionext UniPhier SoC Family" 367 select ARCH_HAS_RESET_CONTROLLER 368 select PINCTRL 369 select RESET_CONTROLLER 370 help 371 This enables support for Socionext UniPhier SoC family. 372 373config ARCH_VEXPRESS 374 bool "ARMv8 software model (Versatile Express)" 375 select GPIOLIB 376 select PM 377 select PM_GENERIC_DOMAINS 378 help 379 This enables support for the ARMv8 software model (Versatile 380 Express). 381 382config ARCH_VISCONTI 383 bool "Toshiba Visconti SoC Family" 384 select PINCTRL 385 select PINCTRL_VISCONTI 386 help 387 This enables support for Toshiba Visconti SoCs Family. 388 389config ARCH_XGENE 390 bool "AppliedMicro X-Gene SOC Family" 391 help 392 This enables support for AppliedMicro X-Gene SOC Family 393 394config ARCH_ZYNQMP 395 bool "Xilinx ZynqMP Family" 396 help 397 This enables support for Xilinx ZynqMP Family 398 399endmenu # "Platform selection" 400