xref: /illumos-gate/usr/src/uts/common/pcmcia/sys/cis_handlers.h (revision 2d6eb4a5e0a47d30189497241345dc5466bb68ab)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License, Version 1.0 only
6  * (the "License").  You may not use this file except in compliance
7  * with the License.
8  *
9  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
10  * or http://www.opensolaris.org/os/licensing.
11  * See the License for the specific language governing permissions
12  * and limitations under the License.
13  *
14  * When distributing Covered Code, include this CDDL HEADER in each
15  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
16  * If applicable, add the following below this CDDL HEADER, with the
17  * fields enclosed by brackets "[]" replaced with your own identifying
18  * information: Portions Copyright [yyyy] [name of copyright owner]
19  *
20  * CDDL HEADER END
21  */
22 /*
23  * Copyright (c) 1995-2001 by Sun Microsystems, Inc.
24  * All rights reserved.
25  */
26 
27 #ifndef _CIS_HANDLERS_H
28 #define	_CIS_HANDLERS_H
29 
30 #ifdef	__cplusplus
31 extern "C" {
32 #endif
33 
34 /*
35  * This is the CIS tuple handler header file.
36  *
37  * Each tuple that we recognize and are prepared to handle is assigned a
38  *	cistpl_callout_t structure.  This lets us specify a handler for
39  *	this tuple, as well as flags that describe this tuple and which
40  *	are used by the CIS interpreter and tuple parser.
41  */
42 typedef struct cistpl_callout_t {
43     cisdata_t	type;		/* type of tuple */
44     cisdata_t	subtype;	/* only used for CISTPL_FUNCE */
45     uint32_t	flags;		/* misc flags */
46     uint32_t	(*handler)();	/* tuple handler */
47     char	*text;		/* name of tuple */
48 } cistpl_callout_t;
49 
50 /*
51  * Flags that are used by a tuple handler to specify what action it
52  *	should perform.
53  */
54 #define	HANDTPL_NOERROR		0x000000000 /* no error */
55 #define	HANDTPL_SET_FLAGS	0x000000001 /* set tuple flags */
56 #define	HANDTPL_COPY_DONE	0x000000002 /* tuple data copy is done */
57 #define	HANDTPL_PARSE_LTUPLE	0x000000004 /* parse tuple, return opt data */
58 #define	HANDTPL_RETURN_NAME	0x000000008 /* return tuple name string */
59 
60 /*
61  * This flag is returned by tuple handlers if they encounter an error. It
62  *	is returned by cis_list_lcreate if any of the tuple handlers have
63  *	return an error while processing the CIS.
64  *
65  * Note that the following bit is reserved:
66  *		#define	BAD_CIS_ADDR	0x080000000
67  *	It appears in cis.h and is used to indicate that cis_list_create
68  *	tried to read past the end of the mapped in CIS space.
69  */
70 #define	HANDTPL_ERROR		0x001000000 /* handler returned an error */
71 
72 /*
73  * General-use constants and macros that aren't specific to a tuple.
74  */
75 #define	CISTPL_EXT_BIT	0x080		/* additional extension bytes follow */
76 
77 /*
78  * Constants, macros and structures used by cistpl_devspeed and
79  *	cis_convert_devspeed functions.
80  */
81 #define	CISTPL_DEVSPEED_TABLE	0x000000001 /* use the device speed table */
82 #define	CISTPL_DEVSPEED_EXT	0x000000002 /* use the extended speed table */
83 #define	CISTPL_DEVSPEED_MAX_TBL	8 		/* max devspeed table entries */
84 #define	CISTPL_DEVSPEED_MAX_EXP	8		/* max exponent entries */
85 #define	CISTPL_DEVSPEED_MAX_MAN	16		/* max mantissa entries */
86 #define	CISTPL_DEVSPEED_TBL(t)	cistpl_devspeed_struct.table[(t) &	\
87 						(CISTPL_DEVSPEED_MAX_TBL - 1)]
88 #define	CISTPL_DEVSPEED_MAN(m)	cistpl_devspeed_struct.mantissa[(m) &	\
89 						(CISTPL_DEVSPEED_MAX_MAN - 1)]
90 #define	CISTPL_DEVSPEED_EXP(e)	cistpl_devspeed_struct.exponent[(e) &	\
91 						(CISTPL_DEVSPEED_MAX_EXP - 1)]
92 typedef struct cistpl_devspeed_struct_t {
93 	uint32_t	*table;
94 	uint32_t	*tenfac;
95 	uint32_t	*mantissa;
96 	uint32_t	*exponent;
97 } cistpl_devspeed_struct_t;
98 
99 /*
100  * Constants, flags and structure typedefs that are used by specific tuples.
101  *
102  * CISTPL_DEVICE, CISTPL_DEVICE_A, CISTPL_DEVICE_OC and CISTPL_DEVICE_OA
103  */
104 #define	CISTPL_DEVICE_DTYPE_NULL	0x00	/* a NULL device (hole) */
105 #define	CISTPL_DEVICE_DTYPE_ROM		0x01	/* device is of type ROM */
106 #define	CISTPL_DEVICE_DTYPE_OTPROM	0x02	/* device is of type OTPROM */
107 #define	CISTPL_DEVICE_DTYPE_EPROM	0x03	/* device is of type EPROM */
108 #define	CISTPL_DEVICE_DTYPE_EEPROM	0x04	/* device is of type EEPROM */
109 #define	CISTPL_DEVICE_DTYPE_FLASH	0x05	/* device is of type FLASH */
110 #define	CISTPL_DEVICE_DTYPE_SRAM	0x06	/* device is of type SRAM */
111 #define	CISTPL_DEVICE_DTYPE_DRAM	0x07	/* device is of type DRAM */
112 #define	CISTPL_DEVICE_DTYPE_RSVD_8	0x08	/* reserved */
113 #define	CISTPL_DEVICE_DTYPE_RSVD_9	0x09	/* reserved */
114 #define	CISTPL_DEVICE_DTYPE_RSVD_a	0x0a	/* reserved */
115 #define	CISTPL_DEVICE_DTYPE_RSVD_b	0x0b	/* reserved */
116 #define	CISTPL_DEVICE_DTYPE_RSVD_c	0x0c	/* reserved */
117 #define	CISTPL_DEVICE_DTYPE_FUNCSPEC	0x0d	/* device is of type FUNCSPEC */
118 #define	CISTPL_DEVICE_DTYPE_EXTEND	0x0e	/* device is of type extended */
119 #define	CISTPL_DEVICE_DTYPE_RSVD_f	0x0f	/* reserved */
120 
121 /*
122  * Flags for cistpl_device_node_t->flags member for CISTPL_DEVICE
123  *	and CISTPL_DEVICE_A tuples
124  */
125 #define	CISTPL_DEVICE_WPS		0x00000001	/* WPS bit is set */
126 /*
127  * Flags and values for cistpl_device_node_t->flags member for
128  *	CISTPL_DEVICE_OC and CISTPL_DEVICE_OA tuples
129  */
130 #define	CISTPL_DEVICE_OC_MWAIT		0x00010000	/* use MWAIT */
131 #define	CISTPL_DEVICE_OC_Vcc_MASK	0x00060000	/* mask for Vcc value */
132 #define	CISTPL_DEVICE_OC_Vcc5		0x00000000	/* 5.0 volt operation */
133 #define	CISTPL_DEVICE_OC_Vcc33		0x00020000	/* 3.3 volt operation */
134 #define	CISTPL_DEVICE_OC_VccXX		0x00040000	/* X.X volt operation */
135 #define	CISTPL_DEVICE_OC_VccYY		0x00060000	/* Y.Y volt operation */
136 /*
137  * CISTPL_DEVICE_MAX_DEVICES defines the maximum number of devices that
138  *	we can parse in a CISTPL_DEVICE{...} tuple
139  */
140 #define	CISTPL_DEVICE_MAX_DEVICES	10
141 
142 /*
143  * CISTPL_DEVICE_SPEED_SIZE_IGNORE if the device speed is set to this, then
144  *	ignore the speed and size values
145  */
146 #define	CISTPL_DEVICE_SPEED_SIZE_IGNORE	0x0ff	/* ignore size and speed info */
147 
148 typedef struct cistpl_device_node_t {
149 	uint32_t	flags;	/* flags specific to this device */
150 	uint32_t	speed;	/* device speed in device speed code format */
151 	uint32_t	nS_speed; /* device speed in nS */
152 	uint32_t	type;	/* device type */
153 	uint32_t	size;	/* device size */
154 	uint32_t	size_in_bytes; /* device size in bytes */
155 } cistpl_device_node_t;
156 
157 typedef struct cistpl_device_t {
158 	uint32_t		num_devices; /* number of devices found */
159 	cistpl_device_node_t	devnode[CISTPL_DEVICE_MAX_DEVICES];
160 } cistpl_device_t;
161 
162 /*
163  * CISTPL_CONFIG
164  */
165 #define	MAKE_CONFIG_REG_ADDR(base, reg)	(base + (reg * 2))
166 #define	CISTPL_CONFIG_MAX_CONFIG_REGS	128 /* max num config regs */
167 typedef struct cistpl_config_t {
168     uint32_t	present;	/* register present flags */
169     uint32_t	nr;		/* number of config registers found */
170     uint32_t	hr;		/* highest config register index found */
171     uint32_t	regs[CISTPL_CONFIG_MAX_CONFIG_REGS];	/* reg offsets */
172     uint32_t	base;		/* base offset of config registers */
173     uint32_t	last;		/* last config index */
174 } cistpl_config_t;
175 
176 /*
177  * CISTPL_VERS_1
178  */
179 #define	CISTPL_VERS_1_MAX_PROD_STRINGS	4 /* max number product strings */
180 typedef struct cistpl_vers_1_t {
181     uint32_t	major;		/* major version number */
182     uint32_t	minor;		/* minor version number */
183     uint32_t	ns;		/* number of information strings */
184 				/* pointers to product information strings */
185     char	pi[CISTPL_VERS_1_MAX_PROD_STRINGS][CIS_MAX_TUPLE_DATA_LEN];
186 } cistpl_vers_1_t;
187 
188 /*
189  * CISTPL_VERS_2
190  */
191 typedef struct cistpl_vers_2_t {
192     uint32_t	vers;		/* version number */
193     uint32_t	comply;		/* level of compliance */
194     uint32_t	dindex;		/* byte address of first data byte in card */
195     uint32_t	reserved;	/* two reserved bytes */
196     uint32_t	vspec8;		/* vendor specific (byte 8) */
197     uint32_t	vspec9;		/* vendor specific (byte 9) */
198     uint32_t	nhdr;		/* number of copies of CIS present on device */
199     char	oem[CIS_MAX_TUPLE_DATA_LEN];	/* Vendor of software that */
200 							/* formatted card */
201     char	info[CIS_MAX_TUPLE_DATA_LEN];	/* Informational message */
202 							/* about card */
203 } cistpl_vers_2_t;
204 
205 /*
206  * CISTPL_JEDEC_A and CISTPL_JEDEC_C
207  */
208 #define	CISTPL_JEDEC_MAX_IDENTIFIERS	4
209 typedef struct jedec_ident_t {
210 	uint32_t	id;	/* manufacturer id */
211 	uint32_t	info;	/* manufacturer specific info */
212 } jedec_ident_t;
213 
214 typedef struct cistpl_jedec_t {
215 	uint32_t	nid;		/* # of JEDEC identifiers present */
216 	jedec_ident_t	jid[CISTPL_JEDEC_MAX_IDENTIFIERS];
217 } cistpl_jedec_t;
218 
219 /*
220  * CISTPL_FORMAT and CISTPL_FORMAT_A
221  *
222  * These tuples describe the data recording format for a region.
223  */
224 typedef struct cistpl_format_t {
225 	uint32_t	type;	/* format type code */
226 	uint32_t	edc_length; /* error detection code length */
227 	uint32_t	edc_type; /* error detection code type */
228 	uint32_t	offset;	/* offset of first byte of data in this part */
229 	uint32_t	nbytes;	/* number of bytes of data in this partition */
230 	union {
231 		struct disk {
232 		    uint32_t	bksize; /* block size */
233 		    uint32_t	nblocks; /* nblocks data for disk-like device */
234 		    uint32_t	edcloc; /* location of error detection code */
235 		} disk;
236 		struct mem {
237 		    uint32_t	flags; /* various flags */
238 		    uint32_t	reserved; /* reserved byte */
239 		    caddr_t	address; /* physical addr for mem-like device */
240 		    uint32_t	edcloc; /* location of error detection code */
241 		} mem;
242 	} dev;
243 } cistpl_format_t;
244 
245 /*
246  * device format types
247  */
248 #define	TPLFMTTYPE_DISK	0x00	/* disk-like format */
249 #define	TPLFMTTYPE_MEM	0x01	/* memory-like format */
250 #define	TPLFMTTYPE_VS	0x80	/* vendor specific format */
251 
252 /*
253  * error detection code types
254  */
255 #define	TPLFMTEDC_NONE	0x00	/* no error detection code */
256 #define	TPLFMTEDC_CKSUM	0x01	/* arithmetic checksum is used */
257 #define	TPLFMTEDC_CRC	0x02	/* 16-bit CRC */
258 #define	TPLFMTEDC_PCC	0x03	/* whole-partition arithmetic checksum */
259 #define	TPLFMTEDC_VS	0x80	/* vendor specific error checking */
260 
261 #define	EDC_LENGTH_MASK	0x07
262 #define	EDC_TYPE_MASK   0x0f
263 #define	EDC_TYPE_SHIFT	3
264 
265 /*
266  * flags for memory-like devices
267  */
268 #define	TPLFMTFLAGS_ADDR	0x01	/* address is valid */
269 #define	TPLFMTFLAGS_AUTO	0x02	/* automatically map memory region */
270 
271 /*
272  * CISTPL_GEOMETRY
273  */
274 typedef struct cistpl_geometry_t {
275 	uint32_t	spt;
276 	uint32_t	tpc;
277 	uint32_t	ncyl;
278 } cistpl_geometry_t;
279 
280 /*
281  * CISTPL_BYTEORDER
282  */
283 typedef struct cistpl_byteorder_t {
284 	uint32_t	order;		/* byte order code */
285 	uint32_t	map;		/* byte mapping code */
286 } cistpl_byteorder_t;
287 
288 /*
289  * byte order and mapping codes
290  */
291 #define	TPLBYTEORD_LOW	0x00	/* specifies little endian order */
292 #define	TPLBYTEORD_HIGH	0x01	/* specifies big endian order */
293 #define	TPLBYTEORD_VS	0x80	/* vendor specific order 0x80-0xFF */
294 
295 #define	TPLBYTEMAP_LOW	0x00	/* byte zero is least significant byte */
296 #define	TPLBYTEMAP_HIGH	0x01	/* byte zero is most significant byte */
297 #define	TPLBYTEMAP_VS	0x80	/* vendor specific mapping */
298 
299 /*
300  * CISTPL_DATE
301  */
302 typedef struct cistpl_date_t {
303 	uint32_t	time;
304 	uint32_t	day;
305 } cistpl_date_t;
306 
307 /*
308  * CISTPL_BATTERY
309  */
310 typedef struct cistpl_battery_t {
311 	uint32_t	rday;		/* replacement date */
312 	uint32_t	xday;		/* expiration date */
313 } cistpl_battery_t;
314 
315 /*
316  * CISTPL_ORG
317  */
318 typedef struct cistpl_org_t {
319 	uint32_t	type;		/* data organization code */
320 	char	desc[CIS_MAX_TUPLE_DATA_LEN];	/* text description of */
321 						/* this organization */
322 } cistpl_org_t;
323 
324 /*
325  * CISTPL_MANFID
326  */
327 typedef struct cistpl_manfid_t {
328 	uint32_t	manf;		/* PCMCIA PC Card manufacturer code */
329 	uint32_t	card;		/* manufacturer information */
330 } cistpl_manfid_t;
331 
332 /*
333  * CISTPL_FUNCID
334  */
335 typedef struct cistpl_funcid_t {
336 	uint32_t	function;		/* PC Card function code */
337 	uint32_t	sysinit;		/* system initialization mask */
338 } cistpl_funcid_t;
339 
340 /*
341  * Function types for CISTPL_FUNCID; note that the TPLFUNC_UNKNOWN is
342  *	not defined by the PCMCIA standard.
343  *
344  * Definitions for cistpl_funcid_t->function
345  */
346 #define	TPLFUNC_MULTI		0x000	/* vendor-specific multifunction card */
347 #define	TPLFUNC_MEMORY		0x001	/* memory card */
348 #define	TPLFUNC_SERIAL		0x002	/* serial I/O port */
349 #define	TPLFUNC_PARALLEL	0x003	/* parallel printer port */
350 #define	TPLFUNC_FIXED		0x004	/* fixed disk, silicon or removeable */
351 #define	TPLFUNC_VIDEO		0x005	/* video interface */
352 #define	TPLFUNC_LAN		0x006	/* Local Area Network adapter */
353 #define	TPLFUNC_AIMS		0x007	/* Auto Incrementing Mass Storage */
354 #define	TPLFUNC_SCSI		0x008	/* SCSI bridge */
355 #define	TPLFUNC_SECURITY	0x009	/* Security Cards */
356 #define	TPLFUNC_VENDOR_SPECIFIC	0x0fe	/* Vendor Specific */
357 #define	TPLFUNC_UNKNOWN		0x0ff	/* unknown function(s) */
358 /*
359  * Definitions for cistpl_funcid_t->sysinit
360  */
361 #define	TPLINIT_POST		0x01	/* POST should attempt configure */
362 #define	TPLINIT_ROM		0x02	/* map ROM during sys init */
363 
364 /*
365  * CISTPL_FUNCE
366  */
367 typedef struct cistpl_funce_t {
368 	uint32_t	function;		/* type of extended data */
369 	uint32_t	subfunction;
370 	union {
371 		struct serial {
372 			uint32_t ua;	/* UART in use */
373 			uint32_t uc;	/* UART capabilities */
374 		} serial;
375 		struct modem {
376 			uint32_t fc;	/* supported flow control methods */
377 			uint32_t cb;	/* size of DCE command buffer */
378 			uint32_t eb;	/* size of DCE to DCE buffer */
379 			uint32_t tb;	/* size of DTE to DCE buffer */
380 		} modem;
381 		struct data_modem {
382 			uint32_t ud;	/* highest data rate */
383 			uint32_t ms;	/* modulation standards */
384 			/* err correct proto and non-CCITT modulation */
385 			uint32_t em;
386 			uint32_t dc;	/* data compression protocols */
387 			uint32_t cm;	/* command protocols */
388 			uint32_t ex;	/* escape mechanisms */
389 			uint32_t dy;	/* standardized data encryption */
390 			uint32_t ef;	/* misc. end user features */
391 			uint32_t ncd;	/* number of country codes */
392 			uchar_t cd[16];	/* CCITT country code */
393 		} data_modem;
394 		struct fax {
395 			uint32_t uf;	/* highest data rate in DTE/UART */
396 			uint32_t fm;	/* CCITT modulation standards */
397 			uint32_t fy;	/* standardized data encryption */
398 			uint32_t fs;	/* feature selection */
399 			uint32_t ncf; /* number of country codes */
400 			uchar_t cf[16];	/* CCITT country codes */
401 		} fax;
402 		struct voice {
403 			uint32_t uv;	/* highest data rate */
404 			uint32_t nsr;
405 			uint32_t sr[16]; /* voice sampling rates (*100) */
406 			uint32_t nss;
407 			uint32_t ss[16]; /* voice sample sizes (*10) */
408 			uint32_t nsc;
409 			uint32_t sc[16]; /* voice compression methods */
410 		} voice;
411 		struct lan {
412 			uint32_t tech; /* network technology */
413 			uint32_t speed; /* media bit or baud rate */
414 			uint32_t media; /* network media supported */
415 			uint32_t con; /* open/closed connector standard */
416 			uint32_t id_sz; /* length of lan station id */
417 			uchar_t id[16]; /* station ID */
418 		} lan;
419 	}   data;
420 } cistpl_funce_t;
421 
422 /* serial port subfunctions */
423 #define	TPLFE_SUB_SERIAL	0 /* serial port */
424 #define	TPLFE_SUB_MODEM_COMMON	1 /* common modem interface */
425 #define	TPLFE_SUB_MODEM_DATA	2 /* data modem services */
426 #define	TPLFE_SUB_MODEM_FAX	3 /* fax modem services */
427 #define	TPLFE_SUB_VOICE		4 /* voice services */
428 /* modem subfunctions for description of capabilities */
429 #define	TPLFE_CAP_MODEM_DATA	5 /* data modem capabilities */
430 #define	TPLFE_CAP_MODEM_FAX	6 /* fax modem capabilities */
431 #define	TPLFE_CAP_MODEM_VOICE	7 /* voice modem capabilities */
432 /* serial port subfunctions for description of capabilities */
433 #define	TPLFE_CAP_SERIAL_DATA	8 /* serial port capabilities - data modem */
434 #define	TPLFE_CAP_SERIAL_FAX	9 /* serial port capabilities - fax modem */
435 #define	TPLFE_CAP_SERIAL_VOICE 10 /* serial port capabilities - voice */
436 
437 /* serial port UART definitions */
438 #define	TPLFE_UA_8250		0 /* Intel 8250 */
439 #define	TPLFE_UA_16450		1 /* NS 16450 */
440 #define	TPLFE_UA_16550		2 /* NS 16550 */
441 
442 /* serial port capabilities definitions */
443 #define	TPLFE_UC_PARITY_SPACE	0x0001 /* space parity supported */
444 #define	TPLFE_UC_PARITY_MARK	0x0002 /* mark parity supported */
445 #define	TPLFE_UC_PARITY_ODD	0x0004 /* odd parity supported */
446 #define	TPLFE_UC_PARITY_EVEN	0x0008 /* even parity supported */
447 #define	TPLFE_UC_CS5		0x0100 /* 5 bit characters supported */
448 #define	TPLFE_UC_CS6		0x0200 /* 6 bit characters supported */
449 #define	TPLFE_UC_CS7		0x0400 /* 7 bit characters supported */
450 #define	TPLFE_UC_CS8		0x0800 /* 8 bit characters supported */
451 #define	TPLFE_UC_STOP_1		0x1000 /* 1 stop bit supported */
452 #define	TPLFE_UC_STOP_15	0x2000 /* 1.5 stop bits supported */
453 #define	TPLFE_UC_STOP_2		0x4000 /* 2 stop bits supported */
454 
455 /* modem flow control methods */
456 #define	TPLFE_FC_TX_XONOFF	0x01 /* transmit XON/XOFF */
457 #define	TPLFE_FC_RX_XONOFF	0x02 /* receiver XON/XOFF */
458 #define	TPLFE_FC_TX_HW		0x04 /* transmit hardware flow control (CTS) */
459 #define	TPLFE_FC_RX_HW		0x08 /* receiver hardware flow control (RTS) */
460 #define	TPLFE_FC_TRANS		0x10 /* tranparent flow control */
461 
462 /* modem modulation standards */
463 #define	TPLFE_MS_BELL103	0x0001 /* 300bps */
464 #define	TPLFE_MS_V21		0x0002 /* 300bps (V.21) */
465 #define	TPLFE_MS_V23		0x0004 /* 600/1200bps (V.23) */
466 #define	TPLFE_MS_V22AB		0x0008 /* 1200bps (V.22A V.22B) */
467 #define	TPLFE_MS_BELL212	0x0010 /* 2400bsp (US Bell 212) */
468 #define	TPLFE_MS_V22BIS		0x0020 /* 2400bps (V.22bis) */
469 #define	TPLFE_MS_V26		0x0040 /* 2400bps leased line (V.26) */
470 #define	TPLFE_MS_V26BIS		0x0080 /* 2400bps (V.26bis) */
471 #define	TPLFE_MS_V27BIS		0x0100 /* 4800/2400bps leased line (V.27bis) */
472 #define	TPLFE_MS_V29		0x0200 /* 9600/7200/4800 leased line (V.29) */
473 #define	TPLFE_MS_V32		0x0400 /* up to 9600bps (V.32) */
474 #define	TPLFE_MS_V32BIS		0x0800 /* up to 14400bps (V.32bis) */
475 #define	TPLFE_MS_VFAST		0x1000 /* up to 28800 V.FAST */
476 
477 /* modem error correction/detection protocols */
478 #define	TPLFE_EM_MNP		0x01 /* MNP levels 2-4 */
479 #define	TPLFE_EM_V42		0x02 /* CCITT LAPM (V.42) */
480 
481 /* modem data compression protocols */
482 #define	TPLFE_DC_V42BIS		0x01 /* CCITT compression V.42 */
483 #define	TPLFE_DC_MNP5		0x02 /* MNP compression (uses MNP 2, 3 or 4) */
484 
485 /* modem command protocols */
486 #define	TPLFE_CM_AT1	0x01 /* ANSI/EIA/TIA 602 "Action" commands */
487 #define	TPLFE_CM_AT2	0x02 /* ANSI/EIA/TIA 602 "ACE/DCE IF Params" */
488 #define	TPLFE_CM_AT3	0x04 /* ANSI/EIA/TIA 602 "Ace Parameters" */
489 #define	TPLFE_CM_MNP_AT	0x08 /* MNP specificat AT commands */
490 #define	TPLFE_CM_V25BIS	0x10 /* V.25bis calling commands */
491 #define	TPLFE_CM_V25A	0x20 /* V.25bis test procedures */
492 #define	TPLFE_CM_DMCL	0x40 /* DMCL command mode */
493 
494 /* modem escape mechanism */
495 #define	TPLFE_EX_BREAK		0x01 /* BREAK support standardized */
496 #define	TPLFE_EX_PLUS		0x02 /* +++ returns to command mode */
497 #define	TPLFE_EX_UD		0x04 /* user defined escape character */
498 
499 /* modem miscellaneous features */
500 #define	TPLFE_EF_CALLERID	0x01 /* Caller ID is supported */
501 
502 /* fax modulation standards */
503 #define	TPLFE_FM_V21C2	0x01 /* 300bps (V.21-C2) */
504 #define	TPLFE_FM_V27TER	0x02 /* 4800/2400bps (V.27ter) */
505 #define	TPLFE_FM_V29	0x04 /* 9600/7200/4800 leased line (V.29) */
506 #define	TPLFE_FM_V17	0x08 /* 14.4K/12K/9600/7200bps (V.17) */
507 #define	TPLFE_FM_V33	0x10 /* 14.4K/12K/9600/7200 lease line (V.33) */
508 
509 /* fax feature selection */
510 #define	TPLFE_FS_T3		0x01 /* Group 2 (T.3) service class */
511 #define	TPLFE_FS_T4		0x02 /* Group 3 (T.4) service class */
512 #define	TPLFE_FS_T6		0x04 /* Group 4 (T.6) service class */
513 #define	TPLFE_FS_ECM		0x08 /* Error Correction Modeer */
514 #define	TPLFE_FS_VOICEREQ	0x10 /* voice requests allowed */
515 #define	TPLFE_FS_POLLING	0x20 /* polling support */
516 #define	TPLFE_FS_FTP		0x40 /* file transfer support */
517 #define	TPLFE_FS_PASSWORD	0x80 /* password support */
518 
519 /* LAN tuple definitions */
520 #define	TPLFE_NETWORK_INFO	0x00
521 
522 /* LAN technology types */
523 #define	TPLFE_LAN_TECH_ARCNET		1
524 #define	TPLFE_LAN_TECH_ETHERNET		2
525 #define	TPLFE_LAN_TECH_TOKENRING	3
526 #define	TPLFE_LAN_TECH_LOCALTALK	4
527 #define	TPLFE_LAN_TECH_FDDI		5
528 #define	TPLFE_LAN_TECH_ATM		6
529 #define	TPLFE_LAN_TECH_WIRELESS		7
530 
531 /* LAN media types */
532 #define	TPLFE_LAN_MEDIA_INHERENT	0
533 #define	TPLFE_LAN_MEDIA_UTP		1
534 #define	TPLFE_LAN_MEDIA_STP		2
535 #define	TPLFE_LAN_MEDIA_THIN_COAX	3
536 #define	TPLFE_LAN_MEDIA_THICK_COAX	4
537 #define	TPLFE_LAN_MEDIA_FIBER		5
538 #define	TPLFE_LAN_MEDIA_SSR_902		6
539 #define	TPLFE_LAN_MEDIA_SSR_2_4		7
540 #define	TPLFE_LAN_MEDIA_SSR_5_4		8
541 #define	TPLFE_LAN_MEDIA_DIFFUSE_IR	9
542 #define	TPLFE_LAN_MEDIA_PTP_IR		10
543 
544 /*
545  * CISTPL_CFTABLE_ENTRY
546  *
547  * These flags and macros are used internally to the handler.
548  */
549 	/* mask to get the config entry number from TPCE_INDX */
550 #define	CISTPL_CFTABLE_TPCE_CFGENTRYM		0x03f
551 		/* default config bit in TPCE_INDX */
552 #define	CISTPL_CFTABLE_TPCE_DEFAULTM		0x040
553 		/* interface config byte follows */
554 #define	CISTPL_CFTABLE_TPCE_IFM			0x080
555 
556 		/* power bit mask for tpce_fs */
557 #define	CISTPL_CFTABLE_TPCE_FS_PWRM		0x003
558 		/* Vcc, Vpp1 and Vpp2 descriptions */
559 #define	CISTPL_CFTABLE_TPCE_FS_PWR_VPP2M	0x003
560 		/* Vcc and Vpp1=Vpp2 descriptions */
561 #define	CISTPL_CFTABLE_TPCE_FS_PWR_VPP1M	0x002
562 		/* Vcc description only */
563 #define	CISTPL_CFTABLE_TPCE_FS_PWR_VCCM		0x001
564 		/* no connection on sleep/power down */
565 #define	CISTPL_CFTABLE_PD_NC_SLEEPM		0x07d
566 		/* zero value required */
567 #define	CISTPL_CFTABLE_PD_ZEROM			0x07e
568 		/* no connection ever */
569 #define	CISTPL_CFTABLE_PD_NCM			0x07f
570 
571 		/* timing data exists */
572 #define	CISTPL_CFTABLE_TPCE_FS_TDM		0x004
573 		/* WAIT scale mask */
574 #define	CISTPL_CFTABLE_TPCE_FS_TD_WAITM		0x003
575 #define	GET_TPCE_FS_TD_WAITS(sf)	((sf)& \
576 					    CISTPL_CFTABLE_TPCE_FS_TD_WAITM)
577 		/* RDY/BSY scale mask */
578 #define	CISTPL_CFTABLE_TPCE_FS_TD_RDYM		0x01c
579 #define	GET_TPCE_FS_TD_RDYS(sf)	(((sf)>>2)& \
580 					CISTPL_CFTABLE_TPCE_FS_TD_RDYM)
581 		/* RSVD scale mask */
582 #define	CISTPL_CFTABLE_TPCE_FS_TD_RSVDM		0x0e0
583 #define	GET_TPCE_FS_TD_RSVDS(sf)	(((sf)>>5)& \
584 					    CISTPL_CFTABLE_TPCE_FS_TD_RSVDM)
585 
586 #define	CISTPL_CFTABLE_TPCE_FS_IOM		0x008	/* I/O data exists */
587 		/* I/O addr lines mask */
588 #define	CISTPL_CFTABLE_TPCE_FS_IO_ALM		0x01f
589 		/* RANGE bit in TPCE_IO */
590 #define	CISTPL_CFTABLE_TPCE_FS_IO_RANGEM	0x080
591 		/* max of 16 I/O ranges */
592 #define	CISTPL_CFTABLE_ENTRY_MAX_IO_RANGES	16
593 
594 #define	CISTPL_CFTABLE_TPCE_FS_IRQM		0x010	/* IRQ data exists */
595 		/* extended IRQ mask exists */
596 #define	CISTPL_CFTABLE_TPCE_FS_IRQ_MASKM	0x010
597 
598 #define	CISTPL_CFTABLE_TPCE_FS_MEMM		0x060	/* mem space mask */
599 		/* space selection byte ... */
600 #define	CISTPL_CFTABLE_TPCE_FS_MEM3M		0x060
601 		/* length (2 bytes) and card address (2 bytes) */
602 #define	CISTPL_CFTABLE_TPCE_FS_MEM2M		0x040
603 		/* single 2-byte length */
604 #define	CISTPL_CFTABLE_TPCE_FS_MEM1M		0x020
605 		/* max of 8 mem space descriptors */
606 #define	CISTPL_CFTABLE_ENTRY_MAX_MEM_WINDOWS	8
607 		/* number of bytes/page description */
608 #define	CISTPL_CFTABLE_TPCE_FS_MEM_PGSIZE	256
609 		/* host addr info present */
610 #define	CISTPL_CFTABLE_TPCE_FS_MEM_HOSTM	0x080
611 
612 #define	CISTPL_CFTABLE_TPCE_FS_MISCM		0x080	/* misc fields mask */
613 
614 /*
615  * Constants, macros, structures and flags used by cistpl_pd_parse()
616  *	cistpl_expd_parse() and the CISTPL_CFTABLE_ENTRY tuple handler.
617  */
618 #define	CISTPL_PD_MAN(m)	cistpl_pd_struct.mantissa[m&15]
619 #define	CISTPL_PD_EXP(e)	cistpl_pd_struct.exponent[e&7]
620 typedef struct cistpl_pd_struct_t {
621     uint32_t	*mantissa;
622     uint32_t	*exponent;
623 } cistpl_pd_struct_t;
624 
625 /*
626  * These flags are passed to the caller in the cistpl_cftable_entry_t->flags
627  *	field and indicate what interface information is available.  The low
628  *	order byte of this field is reserved and no flags should be defined
629  *	to exist there.
630  */
631 #define	CISTPL_CFTABLE_TPCE_DEFAULT	0x000000100 /* this is a default conf */
632 
633 /* interface config description present flags */
634 #define	CISTPL_CFTABLE_TPCE_IF		0x000000200 /* if config byte exists */
635 /*
636  * When the CISTPL_CFTABLE_TPCE_IF flag is set, the following flags
637  *	are available in the ifc member of the cistpl_cftable_entry_t
638  *	structure.
639  */
640 #define	CISTPL_CFTABLE_TPCE_IF_MEMORY	0x00	/* memory interface */
641 #define	CISTPL_CFTABLE_TPCE_IF_IO_MEM	0x01	/* IO and memory */
642 #define	CISTPL_CFTABLE_TPCE_IF_RSVD_2	0x02	/* reserved */
643 #define	CISTPL_CFTABLE_TPCE_IF_RSVD_3	0x03	/* reserved */
644 #define	CISTPL_CFTABLE_TPCE_IF_CUSTOM_0	0x04	/* custom interface 0 */
645 #define	CISTPL_CFTABLE_TPCE_IF_CUSTOM_1	0x05	/* custom interface 1 */
646 #define	CISTPL_CFTABLE_TPCE_IF_CUSTOM_2	0x06	/* custom interface 2 */
647 #define	CISTPL_CFTABLE_TPCE_IF_CUSTOM_3	0x07	/* custom interface 3 */
648 #define	CISTPL_CFTABLE_TPCE_IF_RSVD_8	0x08	/* reserved */
649 #define	CISTPL_CFTABLE_TPCE_IF_RSVD_9	0x09	/* reserved */
650 #define	CISTPL_CFTABLE_TPCE_IF_RSVD_a	0x0a	/* reserved */
651 #define	CISTPL_CFTABLE_TPCE_IF_RSVD_b	0x0b	/* reserved */
652 #define	CISTPL_CFTABLE_TPCE_IF_RSVD_c	0x0c	/* reserved */
653 #define	CISTPL_CFTABLE_TPCE_IF_RSVD_d	0x0d	/* reserved */
654 #define	CISTPL_CFTABLE_TPCE_IF_RSVD_e	0x0e	/* reserved */
655 #define	CISTPL_CFTABLE_TPCE_IF_RSVD_f	0x0f	/* reserved */
656 #define	CISTPL_CFTABLE_TPCE_IF_MASK	0x0f	/* interface type mask */
657 #define	CISTPL_CFTABLE_TPCE_IF_BVD	0x10	/* BVD active in PRR */
658 #define	CISTPL_CFTABLE_TPCE_IF_WP	0x20	/* WP active in PRR */
659 #define	CISTPL_CFTABLE_TPCE_IF_RDY	0x40	/* RDY active in PRR */
660 #define	CISTPL_CFTABLE_TPCE_IF_MWAIT	0x80	/* WAIT - mem cycles */
661 
662 /* power description present flags */
663 #define	CISTPL_CFTABLE_TPCE_FS_PWR	0x000001000 /* power info exists */
664 
665 /* timing description present flags */
666 #define	CISTPL_CFTABLE_TPCE_FS_TD	0x000010000 /* timing info exists */
667 
668 /* I/O description present flags */
669 #define	CISTPL_CFTABLE_TPCE_FS_IO	0x000100000 /* I/O information exists */
670 
671 /* IRQ description present flags */
672 #define	CISTPL_CFTABLE_TPCE_FS_IRQ	0x000200000 /* IRQ information exists */
673 
674 /* memory space description present flags */
675 #define	CISTPL_CFTABLE_TPCE_FS_MEM	0x001000000 /* MEM space info exists */
676 
677 /* misc description present flags */
678 #define	CISTPL_CFTABLE_TPCE_FS_MISC	0x002000000 /* MISC info exists */
679 
680 /* additional information tuples present flags */
681 #define	CISTPL_CFTABLE_TPCE_FS_STCE_EV	0x004000000 /* STCE_EV exists */
682 #define	CISTPL_CFTABLE_TPCE_FS_STCE_PD	0x008000000 /* STCE_PD exists */
683 
684 /*
685  * Power description flags and structures.
686  *
687  * The following eight values represent what the power description structure
688  *	parameter selection byte tells us is present.  A copy of this byte
689  *	is in the low order byte of each parameter's flag field.
690  */
691 #define	CISTPL_CFTABLE_PD_NOMV		0x001	/* nominal supply voltage */
692 #define	CISTPL_CFTABLE_PD_MINV		0x002	/* minimum supply voltage */
693 #define	CISTPL_CFTABLE_PD_MAXV		0x004	/* maximum supply voltage */
694 #define	CISTPL_CFTABLE_PD_STATICI	0x008	/* continuous supply current */
695 		/* max current required averaged over 1 second */
696 #define	CISTPL_CFTABLE_PD_AVGI		0x010
697 		/* maximum current required averaged over 10mS */
698 #define	CISTPL_CFTABLE_PD_PEAKI		0x020
699 		/* power down supply curent required */
700 #define	CISTPL_CFTABLE_PD_PDOWNI	0x040
701 		/* power supply is about to blow up */
702 #define	CISTPL_CFTABLE_PD_RFU		0x080
703 
704 /*
705  * For each voltage/current parameter, there is an associated flags field.
706  *	The following flags are in this field.  The low order byte of each
707  *	of these flags fields also contains a copy of the power description
708  *	structure parameter selection byte as read from the tuple, that's why
709  *	we start the flag values at 0x0100 and go up from there.
710  */
711 		/* this parameter exists */
712 #define	CISTPL_CFTABLE_PD_EXISTS	0x000000100
713 		/* multiply return value by 10 */
714 #define	CISTPL_CFTABLE_PD_MUL10		0x000000200
715 		/* no connection on sleep/power down */
716 #define	CISTPL_CFTABLE_PD_NC_SLEEP	0x000001000
717 		/* zero value required */
718 #define	CISTPL_CFTABLE_PD_ZERO		0x000002000
719 		/* no connection ever */
720 #define	CISTPL_CFTABLE_PD_NC		0x000004000
721 
722 typedef struct cistpl_cftable_entry_pwr_t {
723 	uint32_t	nomV;		/* nominal supply voltage */
724 	uint32_t	nomV_flags;
725 	uint32_t	minV;		/* minimum supply voltage */
726 	uint32_t	minV_flags;
727 	uint32_t	maxV;		/* maximum supply voltage */
728 	uint32_t	maxV_flags;
729 	uint32_t	staticI;	/* continuous supply current */
730 	uint32_t	staticI_flags;
731 	uint32_t	avgI;		/* max current required */
732 					/* averaged over 1 sec. */
733 	uint32_t	avgI_flags;
734 	uint32_t	peakI;		/* max current required */
735 					/* averaged over 10mS */
736 	uint32_t	peakI_flags;
737 	uint32_t	pdownI;		/* power down supply curent required */
738 	uint32_t	pdownI_flags;
739 } cistpl_cftable_entry_pwr_t;
740 
741 /*
742  * Flags for the global power description structure.  These show up in
743  *	the flags field of the structure.
744  */
745 #define	CISTPL_CFTABLE_TPCE_FS_PWR_VCC	0x000000001 /* Vcc description valid  */
746 #define	CISTPL_CFTABLE_TPCE_FS_PWR_VPP1	0x000000002 /* vpp1 description valid */
747 #define	CISTPL_CFTABLE_TPCE_FS_PWR_VPP2	0x000000004 /* Vpp2 description valid */
748 
749 typedef struct cistpl_cftable_entry_pd_t {
750 	uint32_t	flags; /* which descriptions are valid */
751 	struct cistpl_cftable_entry_pwr_t pd_vcc; /* VCC power description */
752 	struct cistpl_cftable_entry_pwr_t pd_vpp1; /* Vpp1 power description */
753 	struct cistpl_cftable_entry_pwr_t pd_vpp2; /* Vpp2 power description */
754 } cistpl_cftable_entry_pd_t;
755 
756 /*
757  * Device speed structure.  Each field is only valid if the
758  *	CISTPL_CFTABLE_TPCE_FS_TD flag is set.
759  *
760  * The following flags describe which timing information is available.
761  *	They appear in the flags field of the device speed structure.
762  */
763 		/* WAIT timing exists */
764 #define	CISTPL_CFTABLE_TPCE_FS_TD_WAIT	0x000000001
765 		/* RDY/BSY timing exists */
766 #define	CISTPL_CFTABLE_TPCE_FS_TD_RDY	0x000000002
767 		/* RSVD timing exists */
768 #define	CISTPL_CFTABLE_TPCE_FS_TD_RSVD	0x000000004
769 
770 typedef struct cistpl_cftable_entry_speed_t {
771     uint32_t	flags;		/* which timing information is present */
772     uint32_t	wait;		/* max WAIT time in device speed format */
773     uint32_t	nS_wait;	/* max WAIT time in nS */
774     uint32_t	rdybsy;		/* max RDY/BSY time in device speed format */
775     uint32_t	nS_rdybsy;	/* max RDY/BSY time in nS */
776     uint32_t	rsvd;		/* max RSVD time in device speed format */
777     uint32_t	nS_rsvd;	/* max RSVD time in nS */
778 } cistpl_cftable_entry_speed_t;
779 
780 /*
781  * Device I/O range description structures.  Only valid if the
782  *	CISTPL_CFTABLE_TPCE_FS_IO flag is set.
783  *
784  * The following flags describe the IO description information. They
785  *	appear in the flags field of the IO space description structure.
786  */
787 #define	CISTPL_CFTABLE_TPCE_FS_IO_BUS	0x060	/* bus width mask */
788 #define	CISTPL_CFTABLE_TPCE_FS_IO_BUS8	0x020	/* 8-bit flag */
789 #define	CISTPL_CFTABLE_TPCE_FS_IO_BUS16	0x040	/* 16-bit flag */
790 #define	CISTPL_CFTABLE_TPCE_FS_IO_RANGE	0x080	/* IO address ranges exist */
791 
792 typedef struct cistpl_cftable_entry_io_range_t {
793     uint32_t	addr;		/* I/O start address */
794     uint32_t	length;		/* I/O register length */
795 } cistpl_cftable_entry_io_range_t;
796 typedef struct cistpl_cftable_entry_io_t {
797     uint32_t	flags;		/* direct copy of TPCE_IO byte in tuple */
798     uint32_t	addr_lines;	/* number of decoded I/O address lines */
799     uint32_t	ranges;		/* number of I/O ranges */
800     struct cistpl_cftable_entry_io_range_t
801 	    range[CISTPL_CFTABLE_ENTRY_MAX_IO_RANGES];
802 } cistpl_cftable_entry_io_t;
803 
804 /*
805  * Device IRQ description structure.  Only valid if the
806  *	CISTPL_CFTABLE_TPCE_FS_IRQ flag is set.
807  */
808 typedef struct cistpl_cftable_entry_irq_t {
809     uint32_t	flags;		/* direct copy of TPCE_IR byte in tuple */
810     uint32_t	irqs;		/* bit mask for each allowed IRQ */
811 } cistpl_cftable_entry_irq_t;
812 
813 /*
814  * Device memory space description structure.  Only valid if the
815  *	CISTPL_CFTABLE_TPCE_FS_MEM flag is set.
816  *
817  * The following flags describe the memory description information.  They
818  *	appear in the flags field of the memory space description structure.
819  */
820 		/* space descriptors */
821 #define	CISTPL_CFTABLE_TPCE_FS_MEM3	0x000000001
822 		/* host_addr=card_addr */
823 #define	CISTPL_CFTABLE_TPCE_FS_MEM2	0x000000002
824 		/* card address=0, any host address */
825 #define	CISTPL_CFTABLE_TPCE_FS_MEM1	0x000000004
826 		/* if host address is present in MEM3 */
827 #define	CISTPL_CFTABLE_TPCE_FS_MEM_HOST	0x000000008
828 
829 typedef struct cistpl_cftable_entry_mem_window_t {
830     uint32_t	length;		/* length of this window */
831     uint32_t	card_addr;	/* card address */
832     uint32_t	host_addr;	/* host address */
833 } cistpl_cftable_entry_mem_window_t;
834 typedef struct cistpl_cftable_entry_mem_t {
835     uint32_t	flags;		/* memory desc type and host addr info */
836     uint32_t	windows;	/* number of memory space descriptors */
837     cistpl_cftable_entry_mem_window_t
838 	    window[CISTPL_CFTABLE_ENTRY_MAX_MEM_WINDOWS];
839 } cistpl_cftable_entry_mem_t;
840 
841 /*
842  * Devices misc description structure.  Only valid if the
843  *	CISTPL_CFTABLE_TPCE_FS_MISC flag is set.
844  */
845 #define	CISTPL_CFTABLE_TPCE_FS_MISC_MAX	2	   /* # bytes we understand */
846 #define	CISTPL_CFTABLE_TPCE_MI_MTC_MASK	0x00000007 /* max twin cards mask */
847 #define	CISTPL_CFTABLE_TPCE_MI_AUDIO	0x00000008 /* audio on BVD2 */
848 #define	CISTPL_CFTABLE_TPCE_MI_READONLY	0x00000010 /* R/O storage */
849 #define	CISTPL_CFTABLE_TPCE_MI_PWRDOWN	0x00000020 /* powerdown capable */
850 #define	CISTPL_CFTABLE_TPCE_MI_DRQ_MASK	0x00000c00 /* DMAREQ mask */
851 #define	CISTPL_CFTABLE_TPCE_MI_DRQ_SPK	0x00000400 /* DMAREQ on SPKR */
852 #define	CISTPL_CFTABLE_TPCE_MI_DRQ_IOIS	0x00000800 /* DMAREQ on IOIS16 */
853 #define	CISTPL_CFTABLE_TPCE_MI_DRQ_INP	0x00000c00 /* DMAREQ on INPACK */
854 #define	CISTPL_CFTABLE_TPCE_MI_DMA_8	0x00000000 /* DMA width 8 bits */
855 #define	CISTPL_CFTABLE_TPCE_MI_DMA_16	0x00001000 /* DMA width 16 bits */
856 
857 typedef struct cistpl_cftable_entry_misc_t {
858     uint32_t	flags;		/* misc features flags */
859 } cistpl_cftable_entry_misc_t;
860 
861 /*
862  * Additional information sub-tuples defines and structure
863  */
864 #define	STCE_EV		0x0c0	/* Environment Descriptor Subtuple */
865 #define	STCE_PD		0x0c1	/* Physical Device Name Subtuple */
866 typedef struct cistpl_cftable_entry_stce_ev_t {
867 	char	stev_strs[CIS_MAX_TUPLE_DATA_LEN];
868 } cistpl_cftable_entry_stce_ev_t;
869 
870 typedef struct cistpl_cftable_entry_stce_pd_t {
871 	char	stpd_strs[CIS_MAX_TUPLE_DATA_LEN];
872 } cistpl_cftable_entry_stce_pd_t;
873 
874 /*
875  * cistpl_cftable_entry_t - this is the struct that the caller passes
876  *				to the CISTPL_CFTABLE_ENTRY handler
877  */
878 typedef struct cistpl_cftable_entry_t {
879     uint32_t	flags;		/* which descriptions are valid */
880     uint32_t	ifc;		/* interface description info */
881     uint32_t	pin;		/* values for PRR */
882     uint32_t	index;		/* configuration index number */
883     struct cistpl_cftable_entry_pd_t	pd; /* power requirements description */
884     struct cistpl_cftable_entry_speed_t	speed; /* device speed description */
885     struct cistpl_cftable_entry_io_t	io; /* device I/O map */
886     struct cistpl_cftable_entry_irq_t	irq; /* device IRQ utilization */
887     struct cistpl_cftable_entry_mem_t	mem; /* device memory space */
888     struct cistpl_cftable_entry_misc_t	misc; /* misc device features */
889 } cistpl_cftable_entry_t;
890 
891 /*
892  * CISTPL_LINKTARGET
893  *
894  * This tuple is used to verify that tuple chains other than the primary
895  *	chain which starts at offset 0 in Attribute Memory are valid. All
896  *	secondary tuple chains are required to contain this tuple as the
897  *	first tuple of the chain.
898  * This tuple must have a link field of at least MIN_LINKTARGET_LENGTH and
899  *	must contain the byte pattern CISTPL_LINKTARGET_MAGIC.
900  * LINKTARGET_AC_HEADER_LENGTH is the number of bytes contained in a
901  *	valid CISTPL_LINKTARGET tuple header.
902  */
903 #define	MIN_LINKTARGET_LENGTH		3
904 #define	CISTPL_LINKTARGET_MAGIC		"CIS"
905 #define	LINKTARGET_AC_HEADER_LENGTH	2
906 
907 typedef struct cistpl_linktarget_t {
908 	uint32_t	length;		/* number of bytes in tpltg_tag */
909 	char	tpltg_tag[CIS_MAX_TUPLE_DATA_LEN];
910 } cistpl_linktarget_t;
911 
912 /*
913  * CISTPL_LONGLINK_A and CISTPL_LONGLINK_C
914  *
915  * Both of these tuples are processed the same way. The target address is
916  *	really an offset from the beginning of the specified address space
917  *	and is not a virtual address.
918  * This tuple must have a link field of at least MIN_LONGLINK_AC_LENGTH.
919  */
920 #define	MIN_LONGLINK_AC_LENGTH		4
921 
922 typedef struct cistpl_longlink_ac_t {
923 	uint32_t		flags;		/* space flags */
924 	uint32_t		tpll_addr;	/* target address, normalized */
925 } cistpl_longlink_ac_t;
926 /*
927  * Flags for cistpl_longlink_ac_t->flags
928  */
929 #define	CISTPL_LONGLINK_AC_AM	0x0001	/* longlink to AM */
930 #define	CISTPL_LONGLINK_AC_CM	0x0002	/* longlink to CM */
931 
932 /*
933  * CISTPL_LONGLINK_MFC
934  *
935  * This tuple describes the start of the function-specific CIS for each
936  *	function on a multi-function card.
937  *
938  * This tuple must have a link field of at least MIN_LONGLINK_AC_LENGTH.
939  */
940 #define	MIN_LONGLINK_MFC_LENGTH		6
941 #define	MIN_LONGLINK_MFC_NREGS		1
942 
943 typedef struct cis_function_t {
944 	uint32_t	tas;    /* target address space of function */
945 	uint32_t	addr;   /* target address offset */
946 } cis_function_t;
947 
948 typedef struct cistpl_longlink_mfc_t {
949 	uint32_t	nfuncs;		/* number of functions */
950 	uint32_t	nregs;		/* number of config register sets */
951 	cis_function_t	function[CIS_MAX_FUNCTIONS];
952 } cistpl_longlink_mfc_t;
953 /*
954  * Flags for cistpl_longlink_mfc_t->function[n]->tas
955  */
956 #define	CISTPL_LONGLINK_MFC_TAS_AM	0x00	/* CIS in attribute memory */
957 #define	CISTPL_LONGLINK_MFC_TAS_CM	0x01	/* CIS in common memory */
958 
959 /*
960  * CISTPL_LONGLINK_CB
961  *
962  * This tuple describes the start of a function's CIS chain
963  *	for CardBus cards
964  */
965 typedef struct cistpl_longlink_cb_t {
966 	uint32_t	flags;		/* address space flags */
967 	uint32_t	addr;		/* raw (unproessed) address value */
968 	union {
969 	    /* device-dependant config space info */
970 	    struct {
971 		uint32_t	offset;	/* offset within config space */
972 	    } cfg;
973 	    /* memory space info */
974 	    struct {
975 		uint32_t	asi;	/* BAR */
976 		uint32_t	offset;	/* offset within BAR space */
977 	    } mem;
978 	    /* expansion ROM space info */
979 	    struct {
980 		uint32_t	image;	/* image number */
981 		uint32_t	offset;	/* offset from iamge base */
982 	    } rom;
983 	} space;
984 } cistpl_longlink_cb_t;
985 /*
986  * Flags for cistpl_longlink_cb_t->flags
987  */
988 #define	CISTPL_LONGLINK_CB_CFG	0x0001	/* config space info valid */
989 #define	CISTPL_LONGLINK_CB_MEM	0x0002	/* memory space info valid */
990 #define	CISTPL_LONGLINK_CB_ROM	0x0004	/* expansion ROM space info valid */
991 
992 /*
993  * CISTPL_SPCL
994  *
995  * This tuple is the Special Purpose tuple and it's contents are dependant
996  *	on the meaning of the header information in this tuple.
997  */
998 typedef struct cistpl_spcl_t {
999 	uint32_t	id;		/* tuple contents identification */
1000 	uint32_t	seq;		/* data sequence number */
1001 	uint32_t	bytes;		/* number of bytes following */
1002 	uchar_t		data[CIS_MAX_TUPLE_DATA_LEN];
1003 } cistpl_spcl_t;
1004 /*
1005  * Flags for cistpl_spcl_t->seq
1006  */
1007 #define	CISTPL_SPCL_SEQ_END	0x080	/* last tuple in sequence */
1008 
1009 /*
1010  * CISTPL_SWIL
1011  *
1012  * This tuple describes the software interleaving of data within a
1013  *	partition on the card.
1014  */
1015 typedef struct cistpl_swil_t {
1016 	uint32_t	intrlv;		/* interleave */
1017 } cistpl_swil_t;
1018 
1019 /*
1020  * CISTPL_BAR
1021  *
1022  * This tuple describes the CardBus Base Address Registers
1023  */
1024 typedef struct cistpl_bar_t {
1025 	uint32_t	attributes;	/* attributes */
1026 	uint32_t	size;		/* BAR size */
1027 } cistpl_bar_t;
1028 /*
1029  * Flags for cistpl_bar_t->attributes
1030  */
1031 #define	CISTPL_BAR_ASI_MASK	0x007	/* Base Address Register mask */
1032 #define	CISTPL_BAR_ASI_BAR_1	0x001	/* Base Address Register 1 */
1033 #define	CISTPL_BAR_ASI_BAR_2	0x002	/* Base Address Register 2 */
1034 #define	CISTPL_BAR_ASI_BAR_3	0x003	/* Base Address Register 3 */
1035 #define	CISTPL_BAR_ASI_BAR_4	0x004	/* Base Address Register 4 */
1036 #define	CISTPL_BAR_ASI_BAR_5	0x005	/* Base Address Register 5 */
1037 #define	CISTPL_BAR_ASI_BAR_6	0x006	/* Base Address Register 6 */
1038 #define	CISTPL_BAR_ASI_BAR_7	0x007	/* Base Address Register 7 */
1039 #define	CISTPL_BAR_ASI_EXP_ROM	0x007	/* Expansion ROM BAR */
1040 
1041 #define	CISTPL_BAR_AS_MEM	0x000	/* BAR is of type memory */
1042 #define	CISTPL_BAR_AS_IO	0x008	/* BAR is of type IO */
1043 
1044 #define	CISTPL_BAR_PREFETCH_CACHE_MASK	0x060	/* prefetch/cache mask */
1045 #define	CISTPL_BAR_PREFETCH		0x020	/* prefetchable not cacheable */
1046 #define	CISTPL_BAR_PREFETCH_CACHE	0x040	/* prefetchable and cacheable */
1047 
1048 #define	CISTPL_BAR_BELOW_1MB	0x080	/* must locate within first MB */
1049 
1050 /*
1051  * CISTPL_DEVICEGEO and CISTPL_DEVICEGEO_A
1052  *
1053  * These tuples describe the device geometry of memory partitions.
1054  */
1055 #define	CISTPL_DEVICEGEO_MAX_PARTITIONS	42
1056 typedef struct cistpl_devicegeo_info_t {
1057 	uint32_t	bus;		/* card interface width in bytes */
1058 	uint32_t	ebs;		/* minimum erase block size */
1059 	uint32_t	rbs;		/* minimum read block size */
1060 	uint32_t	wbs;		/* minimum write bock size */
1061 	uint32_t	part;		/* segment partition subdivisions */
1062 	uint32_t	hwil;		/* hardware interleave */
1063 } cistpl_devicegeo_info_t;
1064 typedef struct cistpl_devicegeo_t {
1065 	cistpl_devicegeo_info_t	info[CISTPL_DEVICEGEO_MAX_PARTITIONS];
1066 } cistpl_devicegeo_t;
1067 
1068 /*
1069  * The cistpl_get_tuple_name_t used to support the HANDTPL_RETURN_NAME
1070  *	operation of the CIS parser.
1071  */
1072 typedef struct cistpl_get_tuple_name_t {
1073 	char	name[CIS_MAX_TUPLE_NAME_LEN];
1074 } cistpl_get_tuple_name_t;
1075 
1076 /*
1077  * cisparse_t - the structure that unifies all tuple parsing structures
1078  */
1079 typedef union cisparse_t {
1080 	cistpl_config_t		cistpl_config;
1081 	cistpl_device_t		cistpl_device;
1082 	cistpl_vers_1_t		cistpl_vers_1;
1083 	cistpl_vers_2_t		cistpl_vers_2;
1084 	cistpl_jedec_t		cistpl_jedec;
1085 	cistpl_format_t		cistpl_format;
1086 	cistpl_geometry_t	cistpl_geometry;
1087 	cistpl_byteorder_t	cistpl_byteorder;
1088 	cistpl_date_t		cistpl_date;
1089 	cistpl_battery_t	cistpl_battery;
1090 	cistpl_org_t		cistpl_org;
1091 	cistpl_manfid_t		cistpl_manfid;
1092 	cistpl_funcid_t		cistpl_funcid;
1093 	cistpl_funce_t		cistpl_funce;
1094 	cistpl_cftable_entry_t	cistpl_cftable_entry;
1095 	cistpl_linktarget_t	cistpl_linktarget;
1096 	cistpl_longlink_ac_t	cistpl_longlink_ac;
1097 	cistpl_longlink_mfc_t	cistpl_longlink_mfc;
1098 	cistpl_spcl_t		cistpl_spcl;
1099 	cistpl_swil_t		cistpl_swil;
1100 	cistpl_bar_t		cistpl_bar;
1101 	cistpl_devicegeo_t	cistpl_devicegeo;
1102 	cistpl_longlink_cb_t	cistpl_longlink_cb;
1103 	cistpl_get_tuple_name_t	cistpl_get_tuple_name;
1104 	/* members below are for legacy support - REMOVE THEM BEFORE FCS!! */
1105 	cistpl_config_t		config;
1106 	cistpl_device_t		device;
1107 	cistpl_vers_1_t		version_1;
1108 	cistpl_vers_2_t		version_2;
1109 	cistpl_jedec_t		jedec;
1110 	cistpl_format_t		format;
1111 	cistpl_geometry_t	geometry;
1112 	cistpl_byteorder_t	byteorder;
1113 	cistpl_date_t		date;
1114 	cistpl_battery_t	battery;
1115 	cistpl_org_t		org;
1116 	cistpl_manfid_t		manfid;
1117 	cistpl_funcid_t		funcid;
1118 	cistpl_funce_t		funce;
1119 	cistpl_cftable_entry_t	cftable;
1120 	cistpl_linktarget_t	linktarget;
1121 	cistpl_longlink_ac_t	longlink_ac;
1122 	cistpl_longlink_mfc_t	longlink_mfc;
1123 	cistpl_spcl_t		spcl;
1124 	cistpl_swil_t		swil;
1125 	cistpl_bar_t		bar;
1126 	cistpl_devicegeo_t	devgeo;
1127 	cistpl_longlink_cb_t	longlink_cb;
1128 	cistpl_get_tuple_name_t	tuple_name;
1129 } cisparse_t;
1130 
1131 #ifdef	__cplusplus
1132 }
1133 #endif
1134 
1135 #endif	/* _CIS_HANDLERS_H */
1136