1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * BMG160 Gyro Sensor driver
4 * Copyright (c) 2014, Intel Corporation.
5 */
6
7 #include <linux/module.h>
8 #include <linux/interrupt.h>
9 #include <linux/delay.h>
10 #include <linux/slab.h>
11 #include <linux/acpi.h>
12 #include <linux/pm.h>
13 #include <linux/pm_runtime.h>
14 #include <linux/iio/iio.h>
15 #include <linux/iio/sysfs.h>
16 #include <linux/iio/buffer.h>
17 #include <linux/iio/trigger.h>
18 #include <linux/iio/events.h>
19 #include <linux/iio/trigger_consumer.h>
20 #include <linux/iio/triggered_buffer.h>
21 #include <linux/regmap.h>
22 #include <linux/regulator/consumer.h>
23 #include "bmg160.h"
24
25 #define BMG160_IRQ_NAME "bmg160_event"
26
27 #define BMG160_REG_CHIP_ID 0x00
28 #define BMG160_CHIP_ID_VAL 0x0F
29
30 #define BMG160_REG_PMU_LPW 0x11
31 #define BMG160_MODE_NORMAL 0x00
32 #define BMG160_MODE_DEEP_SUSPEND 0x20
33 #define BMG160_MODE_SUSPEND 0x80
34
35 #define BMG160_REG_RANGE 0x0F
36
37 #define BMG160_RANGE_2000DPS 0
38 #define BMG160_RANGE_1000DPS 1
39 #define BMG160_RANGE_500DPS 2
40 #define BMG160_RANGE_250DPS 3
41 #define BMG160_RANGE_125DPS 4
42
43 #define BMG160_REG_PMU_BW 0x10
44 #define BMG160_NO_FILTER 0
45 #define BMG160_DEF_BW 100
46 #define BMG160_REG_PMU_BW_RES BIT(7)
47
48 #define BMG160_GYRO_REG_RESET 0x14
49 #define BMG160_GYRO_RESET_VAL 0xb6
50
51 #define BMG160_REG_INT_MAP_0 0x17
52 #define BMG160_INT_MAP_0_BIT_ANY BIT(1)
53
54 #define BMG160_REG_INT_MAP_1 0x18
55 #define BMG160_INT_MAP_1_BIT_NEW_DATA BIT(0)
56
57 #define BMG160_REG_INT_RST_LATCH 0x21
58 #define BMG160_INT_MODE_LATCH_RESET 0x80
59 #define BMG160_INT_MODE_LATCH_INT 0x0F
60 #define BMG160_INT_MODE_NON_LATCH_INT 0x00
61
62 #define BMG160_REG_INT_EN_0 0x15
63 #define BMG160_DATA_ENABLE_INT BIT(7)
64
65 #define BMG160_REG_INT_EN_1 0x16
66 #define BMG160_INT1_BIT_OD BIT(1)
67
68 #define BMG160_REG_XOUT_L 0x02
69 #define BMG160_AXIS_TO_REG(axis) (BMG160_REG_XOUT_L + (axis * 2))
70
71 #define BMG160_REG_SLOPE_THRES 0x1B
72 #define BMG160_SLOPE_THRES_MASK 0x0F
73
74 #define BMG160_REG_MOTION_INTR 0x1C
75 #define BMG160_INT_MOTION_X BIT(0)
76 #define BMG160_INT_MOTION_Y BIT(1)
77 #define BMG160_INT_MOTION_Z BIT(2)
78 #define BMG160_ANY_DUR_MASK 0x30
79 #define BMG160_ANY_DUR_SHIFT 4
80
81 #define BMG160_REG_INT_STATUS_2 0x0B
82 #define BMG160_ANY_MOTION_MASK 0x07
83 #define BMG160_ANY_MOTION_BIT_X BIT(0)
84 #define BMG160_ANY_MOTION_BIT_Y BIT(1)
85 #define BMG160_ANY_MOTION_BIT_Z BIT(2)
86
87 #define BMG160_REG_TEMP 0x08
88 #define BMG160_TEMP_CENTER_VAL 23
89
90 #define BMG160_MAX_STARTUP_TIME_MS 80
91
92 #define BMG160_AUTO_SUSPEND_DELAY_MS 2000
93
94 struct bmg160_data {
95 struct regmap *regmap;
96 struct iio_trigger *dready_trig;
97 struct iio_trigger *motion_trig;
98 struct iio_mount_matrix orientation;
99 struct mutex mutex;
100 /* Ensure naturally aligned timestamp */
101 struct {
102 s16 chans[3];
103 s64 timestamp __aligned(8);
104 } scan;
105 u32 dps_range;
106 int ev_enable_state;
107 int slope_thres;
108 bool dready_trigger_on;
109 bool motion_trigger_on;
110 int irq;
111 };
112
113 enum bmg160_axis {
114 AXIS_X,
115 AXIS_Y,
116 AXIS_Z,
117 AXIS_MAX,
118 };
119
120 static const struct {
121 int odr;
122 int filter;
123 int bw_bits;
124 } bmg160_samp_freq_table[] = { {100, 32, 0x07},
125 {200, 64, 0x06},
126 {100, 12, 0x05},
127 {200, 23, 0x04},
128 {400, 47, 0x03},
129 {1000, 116, 0x02},
130 {2000, 230, 0x01} };
131
132 static const struct {
133 int scale;
134 int dps_range;
135 } bmg160_scale_table[] = { { 1065, BMG160_RANGE_2000DPS},
136 { 532, BMG160_RANGE_1000DPS},
137 { 266, BMG160_RANGE_500DPS},
138 { 133, BMG160_RANGE_250DPS},
139 { 66, BMG160_RANGE_125DPS} };
140
bmg160_set_mode(struct bmg160_data * data,u8 mode)141 static int bmg160_set_mode(struct bmg160_data *data, u8 mode)
142 {
143 struct device *dev = regmap_get_device(data->regmap);
144 int ret;
145
146 ret = regmap_write(data->regmap, BMG160_REG_PMU_LPW, mode);
147 if (ret < 0) {
148 dev_err(dev, "Error writing reg_pmu_lpw\n");
149 return ret;
150 }
151
152 return 0;
153 }
154
bmg160_convert_freq_to_bit(int val)155 static int bmg160_convert_freq_to_bit(int val)
156 {
157 int i;
158
159 for (i = 0; i < ARRAY_SIZE(bmg160_samp_freq_table); ++i) {
160 if (bmg160_samp_freq_table[i].odr == val)
161 return bmg160_samp_freq_table[i].bw_bits;
162 }
163
164 return -EINVAL;
165 }
166
bmg160_set_bw(struct bmg160_data * data,int val)167 static int bmg160_set_bw(struct bmg160_data *data, int val)
168 {
169 struct device *dev = regmap_get_device(data->regmap);
170 int ret;
171 int bw_bits;
172
173 bw_bits = bmg160_convert_freq_to_bit(val);
174 if (bw_bits < 0)
175 return bw_bits;
176
177 ret = regmap_write(data->regmap, BMG160_REG_PMU_BW, bw_bits);
178 if (ret < 0) {
179 dev_err(dev, "Error writing reg_pmu_bw\n");
180 return ret;
181 }
182
183 return 0;
184 }
185
bmg160_get_filter(struct bmg160_data * data,int * val)186 static int bmg160_get_filter(struct bmg160_data *data, int *val)
187 {
188 struct device *dev = regmap_get_device(data->regmap);
189 int ret;
190 int i;
191 unsigned int bw_bits;
192
193 ret = regmap_read(data->regmap, BMG160_REG_PMU_BW, &bw_bits);
194 if (ret < 0) {
195 dev_err(dev, "Error reading reg_pmu_bw\n");
196 return ret;
197 }
198
199 /* Ignore the readonly reserved bit. */
200 bw_bits &= ~BMG160_REG_PMU_BW_RES;
201
202 for (i = 0; i < ARRAY_SIZE(bmg160_samp_freq_table); ++i) {
203 if (bmg160_samp_freq_table[i].bw_bits == bw_bits)
204 break;
205 }
206
207 *val = bmg160_samp_freq_table[i].filter;
208
209 return ret ? ret : IIO_VAL_INT;
210 }
211
212
bmg160_set_filter(struct bmg160_data * data,int val)213 static int bmg160_set_filter(struct bmg160_data *data, int val)
214 {
215 struct device *dev = regmap_get_device(data->regmap);
216 int ret;
217 int i;
218
219 for (i = 0; i < ARRAY_SIZE(bmg160_samp_freq_table); ++i) {
220 if (bmg160_samp_freq_table[i].filter == val)
221 break;
222 }
223
224 ret = regmap_write(data->regmap, BMG160_REG_PMU_BW,
225 bmg160_samp_freq_table[i].bw_bits);
226 if (ret < 0) {
227 dev_err(dev, "Error writing reg_pmu_bw\n");
228 return ret;
229 }
230
231 return 0;
232 }
233
bmg160_chip_init(struct bmg160_data * data)234 static int bmg160_chip_init(struct bmg160_data *data)
235 {
236 struct device *dev = regmap_get_device(data->regmap);
237 int ret;
238 unsigned int val;
239
240 /*
241 * Reset chip to get it in a known good state. A delay of 30ms after
242 * reset is required according to the datasheet.
243 */
244 regmap_write(data->regmap, BMG160_GYRO_REG_RESET,
245 BMG160_GYRO_RESET_VAL);
246 usleep_range(30000, 30700);
247
248 ret = regmap_read(data->regmap, BMG160_REG_CHIP_ID, &val);
249 if (ret < 0) {
250 dev_err(dev, "Error reading reg_chip_id\n");
251 return ret;
252 }
253
254 dev_dbg(dev, "Chip Id %x\n", val);
255 if (val != BMG160_CHIP_ID_VAL) {
256 dev_err(dev, "invalid chip %x\n", val);
257 return -ENODEV;
258 }
259
260 ret = bmg160_set_mode(data, BMG160_MODE_NORMAL);
261 if (ret < 0)
262 return ret;
263
264 /* Wait upto 500 ms to be ready after changing mode */
265 usleep_range(500, 1000);
266
267 /* Set Bandwidth */
268 ret = bmg160_set_bw(data, BMG160_DEF_BW);
269 if (ret < 0)
270 return ret;
271
272 /* Set Default Range */
273 ret = regmap_write(data->regmap, BMG160_REG_RANGE, BMG160_RANGE_500DPS);
274 if (ret < 0) {
275 dev_err(dev, "Error writing reg_range\n");
276 return ret;
277 }
278 data->dps_range = BMG160_RANGE_500DPS;
279
280 ret = regmap_read(data->regmap, BMG160_REG_SLOPE_THRES, &val);
281 if (ret < 0) {
282 dev_err(dev, "Error reading reg_slope_thres\n");
283 return ret;
284 }
285 data->slope_thres = val;
286
287 /* Set default interrupt mode */
288 ret = regmap_clear_bits(data->regmap, BMG160_REG_INT_EN_1,
289 BMG160_INT1_BIT_OD);
290 if (ret < 0) {
291 dev_err(dev, "Error updating bits in reg_int_en_1\n");
292 return ret;
293 }
294
295 ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH,
296 BMG160_INT_MODE_LATCH_INT |
297 BMG160_INT_MODE_LATCH_RESET);
298 if (ret < 0) {
299 dev_err(dev,
300 "Error writing reg_motion_intr\n");
301 return ret;
302 }
303
304 return 0;
305 }
306
bmg160_set_power_state(struct bmg160_data * data,bool on)307 static int bmg160_set_power_state(struct bmg160_data *data, bool on)
308 {
309 #ifdef CONFIG_PM
310 struct device *dev = regmap_get_device(data->regmap);
311 int ret;
312
313 if (on)
314 ret = pm_runtime_get_sync(dev);
315 else {
316 pm_runtime_mark_last_busy(dev);
317 ret = pm_runtime_put_autosuspend(dev);
318 }
319
320 if (ret < 0) {
321 dev_err(dev, "Failed: bmg160_set_power_state for %d\n", on);
322
323 if (on)
324 pm_runtime_put_noidle(dev);
325
326 return ret;
327 }
328 #endif
329
330 return 0;
331 }
332
bmg160_setup_any_motion_interrupt(struct bmg160_data * data,bool status)333 static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
334 bool status)
335 {
336 struct device *dev = regmap_get_device(data->regmap);
337 int ret;
338
339 /* Enable/Disable INT_MAP0 mapping */
340 ret = regmap_update_bits(data->regmap, BMG160_REG_INT_MAP_0,
341 BMG160_INT_MAP_0_BIT_ANY,
342 (status ? BMG160_INT_MAP_0_BIT_ANY : 0));
343 if (ret < 0) {
344 dev_err(dev, "Error updating bits reg_int_map0\n");
345 return ret;
346 }
347
348 /* Enable/Disable slope interrupts */
349 if (status) {
350 /* Update slope thres */
351 ret = regmap_write(data->regmap, BMG160_REG_SLOPE_THRES,
352 data->slope_thres);
353 if (ret < 0) {
354 dev_err(dev, "Error writing reg_slope_thres\n");
355 return ret;
356 }
357
358 ret = regmap_write(data->regmap, BMG160_REG_MOTION_INTR,
359 BMG160_INT_MOTION_X | BMG160_INT_MOTION_Y |
360 BMG160_INT_MOTION_Z);
361 if (ret < 0) {
362 dev_err(dev, "Error writing reg_motion_intr\n");
363 return ret;
364 }
365
366 /*
367 * New data interrupt is always non-latched,
368 * which will have higher priority, so no need
369 * to set latched mode, we will be flooded anyway with INTR
370 */
371 if (!data->dready_trigger_on) {
372 ret = regmap_write(data->regmap,
373 BMG160_REG_INT_RST_LATCH,
374 BMG160_INT_MODE_LATCH_INT |
375 BMG160_INT_MODE_LATCH_RESET);
376 if (ret < 0) {
377 dev_err(dev, "Error writing reg_rst_latch\n");
378 return ret;
379 }
380 }
381
382 ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0,
383 BMG160_DATA_ENABLE_INT);
384
385 } else {
386 ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0, 0);
387 }
388
389 if (ret < 0) {
390 dev_err(dev, "Error writing reg_int_en0\n");
391 return ret;
392 }
393
394 return 0;
395 }
396
bmg160_setup_new_data_interrupt(struct bmg160_data * data,bool status)397 static int bmg160_setup_new_data_interrupt(struct bmg160_data *data,
398 bool status)
399 {
400 struct device *dev = regmap_get_device(data->regmap);
401 int ret;
402
403 /* Enable/Disable INT_MAP1 mapping */
404 ret = regmap_update_bits(data->regmap, BMG160_REG_INT_MAP_1,
405 BMG160_INT_MAP_1_BIT_NEW_DATA,
406 (status ? BMG160_INT_MAP_1_BIT_NEW_DATA : 0));
407 if (ret < 0) {
408 dev_err(dev, "Error updating bits in reg_int_map1\n");
409 return ret;
410 }
411
412 if (status) {
413 ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH,
414 BMG160_INT_MODE_NON_LATCH_INT |
415 BMG160_INT_MODE_LATCH_RESET);
416 if (ret < 0) {
417 dev_err(dev, "Error writing reg_rst_latch\n");
418 return ret;
419 }
420
421 ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0,
422 BMG160_DATA_ENABLE_INT);
423
424 } else {
425 /* Restore interrupt mode */
426 ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH,
427 BMG160_INT_MODE_LATCH_INT |
428 BMG160_INT_MODE_LATCH_RESET);
429 if (ret < 0) {
430 dev_err(dev, "Error writing reg_rst_latch\n");
431 return ret;
432 }
433
434 ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0, 0);
435 }
436
437 if (ret < 0) {
438 dev_err(dev, "Error writing reg_int_en0\n");
439 return ret;
440 }
441
442 return 0;
443 }
444
bmg160_get_bw(struct bmg160_data * data,int * val)445 static int bmg160_get_bw(struct bmg160_data *data, int *val)
446 {
447 struct device *dev = regmap_get_device(data->regmap);
448 int i;
449 unsigned int bw_bits;
450 int ret;
451
452 ret = regmap_read(data->regmap, BMG160_REG_PMU_BW, &bw_bits);
453 if (ret < 0) {
454 dev_err(dev, "Error reading reg_pmu_bw\n");
455 return ret;
456 }
457
458 /* Ignore the readonly reserved bit. */
459 bw_bits &= ~BMG160_REG_PMU_BW_RES;
460
461 for (i = 0; i < ARRAY_SIZE(bmg160_samp_freq_table); ++i) {
462 if (bmg160_samp_freq_table[i].bw_bits == bw_bits) {
463 *val = bmg160_samp_freq_table[i].odr;
464 return IIO_VAL_INT;
465 }
466 }
467
468 return -EINVAL;
469 }
470
bmg160_set_scale(struct bmg160_data * data,int val)471 static int bmg160_set_scale(struct bmg160_data *data, int val)
472 {
473 struct device *dev = regmap_get_device(data->regmap);
474 int ret, i;
475
476 for (i = 0; i < ARRAY_SIZE(bmg160_scale_table); ++i) {
477 if (bmg160_scale_table[i].scale == val) {
478 ret = regmap_write(data->regmap, BMG160_REG_RANGE,
479 bmg160_scale_table[i].dps_range);
480 if (ret < 0) {
481 dev_err(dev, "Error writing reg_range\n");
482 return ret;
483 }
484 data->dps_range = bmg160_scale_table[i].dps_range;
485 return 0;
486 }
487 }
488
489 return -EINVAL;
490 }
491
bmg160_get_temp(struct bmg160_data * data,int * val)492 static int bmg160_get_temp(struct bmg160_data *data, int *val)
493 {
494 struct device *dev = regmap_get_device(data->regmap);
495 int ret;
496 unsigned int raw_val;
497
498 mutex_lock(&data->mutex);
499 ret = bmg160_set_power_state(data, true);
500 if (ret < 0) {
501 mutex_unlock(&data->mutex);
502 return ret;
503 }
504
505 ret = regmap_read(data->regmap, BMG160_REG_TEMP, &raw_val);
506 if (ret < 0) {
507 dev_err(dev, "Error reading reg_temp\n");
508 bmg160_set_power_state(data, false);
509 mutex_unlock(&data->mutex);
510 return ret;
511 }
512
513 *val = sign_extend32(raw_val, 7);
514 ret = bmg160_set_power_state(data, false);
515 mutex_unlock(&data->mutex);
516 if (ret < 0)
517 return ret;
518
519 return IIO_VAL_INT;
520 }
521
bmg160_get_axis(struct bmg160_data * data,int axis,int * val)522 static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val)
523 {
524 struct device *dev = regmap_get_device(data->regmap);
525 int ret;
526 __le16 raw_val;
527
528 mutex_lock(&data->mutex);
529 ret = bmg160_set_power_state(data, true);
530 if (ret < 0) {
531 mutex_unlock(&data->mutex);
532 return ret;
533 }
534
535 ret = regmap_bulk_read(data->regmap, BMG160_AXIS_TO_REG(axis), &raw_val,
536 sizeof(raw_val));
537 if (ret < 0) {
538 dev_err(dev, "Error reading axis %d\n", axis);
539 bmg160_set_power_state(data, false);
540 mutex_unlock(&data->mutex);
541 return ret;
542 }
543
544 *val = sign_extend32(le16_to_cpu(raw_val), 15);
545 ret = bmg160_set_power_state(data, false);
546 mutex_unlock(&data->mutex);
547 if (ret < 0)
548 return ret;
549
550 return IIO_VAL_INT;
551 }
552
bmg160_read_raw(struct iio_dev * indio_dev,struct iio_chan_spec const * chan,int * val,int * val2,long mask)553 static int bmg160_read_raw(struct iio_dev *indio_dev,
554 struct iio_chan_spec const *chan,
555 int *val, int *val2, long mask)
556 {
557 struct bmg160_data *data = iio_priv(indio_dev);
558 int ret;
559
560 switch (mask) {
561 case IIO_CHAN_INFO_RAW:
562 switch (chan->type) {
563 case IIO_TEMP:
564 return bmg160_get_temp(data, val);
565 case IIO_ANGL_VEL:
566 if (iio_buffer_enabled(indio_dev))
567 return -EBUSY;
568 else
569 return bmg160_get_axis(data, chan->scan_index,
570 val);
571 default:
572 return -EINVAL;
573 }
574 case IIO_CHAN_INFO_OFFSET:
575 if (chan->type == IIO_TEMP) {
576 *val = BMG160_TEMP_CENTER_VAL;
577 return IIO_VAL_INT;
578 } else
579 return -EINVAL;
580 case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
581 return bmg160_get_filter(data, val);
582 case IIO_CHAN_INFO_SCALE:
583 switch (chan->type) {
584 case IIO_TEMP:
585 *val = 500;
586 return IIO_VAL_INT;
587 case IIO_ANGL_VEL:
588 {
589 int i;
590
591 for (i = 0; i < ARRAY_SIZE(bmg160_scale_table); ++i) {
592 if (bmg160_scale_table[i].dps_range ==
593 data->dps_range) {
594 *val = 0;
595 *val2 = bmg160_scale_table[i].scale;
596 return IIO_VAL_INT_PLUS_MICRO;
597 }
598 }
599 return -EINVAL;
600 }
601 default:
602 return -EINVAL;
603 }
604 case IIO_CHAN_INFO_SAMP_FREQ:
605 *val2 = 0;
606 mutex_lock(&data->mutex);
607 ret = bmg160_get_bw(data, val);
608 mutex_unlock(&data->mutex);
609 return ret;
610 default:
611 return -EINVAL;
612 }
613 }
614
bmg160_write_raw(struct iio_dev * indio_dev,struct iio_chan_spec const * chan,int val,int val2,long mask)615 static int bmg160_write_raw(struct iio_dev *indio_dev,
616 struct iio_chan_spec const *chan,
617 int val, int val2, long mask)
618 {
619 struct bmg160_data *data = iio_priv(indio_dev);
620 int ret;
621
622 switch (mask) {
623 case IIO_CHAN_INFO_SAMP_FREQ:
624 mutex_lock(&data->mutex);
625 /*
626 * Section 4.2 of spec
627 * In suspend mode, the only supported operations are reading
628 * registers as well as writing to the (0x14) softreset
629 * register. Since we will be in suspend mode by default, change
630 * mode to power on for other writes.
631 */
632 ret = bmg160_set_power_state(data, true);
633 if (ret < 0) {
634 mutex_unlock(&data->mutex);
635 return ret;
636 }
637 ret = bmg160_set_bw(data, val);
638 if (ret < 0) {
639 bmg160_set_power_state(data, false);
640 mutex_unlock(&data->mutex);
641 return ret;
642 }
643 ret = bmg160_set_power_state(data, false);
644 mutex_unlock(&data->mutex);
645 return ret;
646 case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
647 if (val2)
648 return -EINVAL;
649
650 mutex_lock(&data->mutex);
651 ret = bmg160_set_power_state(data, true);
652 if (ret < 0) {
653 bmg160_set_power_state(data, false);
654 mutex_unlock(&data->mutex);
655 return ret;
656 }
657 ret = bmg160_set_filter(data, val);
658 if (ret < 0) {
659 bmg160_set_power_state(data, false);
660 mutex_unlock(&data->mutex);
661 return ret;
662 }
663 ret = bmg160_set_power_state(data, false);
664 mutex_unlock(&data->mutex);
665 return ret;
666 case IIO_CHAN_INFO_SCALE:
667 if (val)
668 return -EINVAL;
669
670 mutex_lock(&data->mutex);
671 /* Refer to comments above for the suspend mode ops */
672 ret = bmg160_set_power_state(data, true);
673 if (ret < 0) {
674 mutex_unlock(&data->mutex);
675 return ret;
676 }
677 ret = bmg160_set_scale(data, val2);
678 if (ret < 0) {
679 bmg160_set_power_state(data, false);
680 mutex_unlock(&data->mutex);
681 return ret;
682 }
683 ret = bmg160_set_power_state(data, false);
684 mutex_unlock(&data->mutex);
685 return ret;
686 default:
687 return -EINVAL;
688 }
689
690 return -EINVAL;
691 }
692
bmg160_read_event(struct iio_dev * indio_dev,const struct iio_chan_spec * chan,enum iio_event_type type,enum iio_event_direction dir,enum iio_event_info info,int * val,int * val2)693 static int bmg160_read_event(struct iio_dev *indio_dev,
694 const struct iio_chan_spec *chan,
695 enum iio_event_type type,
696 enum iio_event_direction dir,
697 enum iio_event_info info,
698 int *val, int *val2)
699 {
700 struct bmg160_data *data = iio_priv(indio_dev);
701
702 *val2 = 0;
703 switch (info) {
704 case IIO_EV_INFO_VALUE:
705 *val = data->slope_thres & BMG160_SLOPE_THRES_MASK;
706 break;
707 default:
708 return -EINVAL;
709 }
710
711 return IIO_VAL_INT;
712 }
713
bmg160_write_event(struct iio_dev * indio_dev,const struct iio_chan_spec * chan,enum iio_event_type type,enum iio_event_direction dir,enum iio_event_info info,int val,int val2)714 static int bmg160_write_event(struct iio_dev *indio_dev,
715 const struct iio_chan_spec *chan,
716 enum iio_event_type type,
717 enum iio_event_direction dir,
718 enum iio_event_info info,
719 int val, int val2)
720 {
721 struct bmg160_data *data = iio_priv(indio_dev);
722
723 switch (info) {
724 case IIO_EV_INFO_VALUE:
725 if (data->ev_enable_state)
726 return -EBUSY;
727 data->slope_thres &= ~BMG160_SLOPE_THRES_MASK;
728 data->slope_thres |= (val & BMG160_SLOPE_THRES_MASK);
729 break;
730 default:
731 return -EINVAL;
732 }
733
734 return 0;
735 }
736
bmg160_read_event_config(struct iio_dev * indio_dev,const struct iio_chan_spec * chan,enum iio_event_type type,enum iio_event_direction dir)737 static int bmg160_read_event_config(struct iio_dev *indio_dev,
738 const struct iio_chan_spec *chan,
739 enum iio_event_type type,
740 enum iio_event_direction dir)
741 {
742
743 struct bmg160_data *data = iio_priv(indio_dev);
744
745 return data->ev_enable_state;
746 }
747
bmg160_write_event_config(struct iio_dev * indio_dev,const struct iio_chan_spec * chan,enum iio_event_type type,enum iio_event_direction dir,int state)748 static int bmg160_write_event_config(struct iio_dev *indio_dev,
749 const struct iio_chan_spec *chan,
750 enum iio_event_type type,
751 enum iio_event_direction dir,
752 int state)
753 {
754 struct bmg160_data *data = iio_priv(indio_dev);
755 int ret;
756
757 if (state && data->ev_enable_state)
758 return 0;
759
760 mutex_lock(&data->mutex);
761
762 if (!state && data->motion_trigger_on) {
763 data->ev_enable_state = 0;
764 mutex_unlock(&data->mutex);
765 return 0;
766 }
767 /*
768 * We will expect the enable and disable to do operation
769 * in reverse order. This will happen here anyway as our
770 * resume operation uses sync mode runtime pm calls, the
771 * suspend operation will be delayed by autosuspend delay
772 * So the disable operation will still happen in reverse of
773 * enable operation. When runtime pm is disabled the mode
774 * is always on so sequence doesn't matter
775 */
776 ret = bmg160_set_power_state(data, state);
777 if (ret < 0) {
778 mutex_unlock(&data->mutex);
779 return ret;
780 }
781
782 ret = bmg160_setup_any_motion_interrupt(data, state);
783 if (ret < 0) {
784 bmg160_set_power_state(data, false);
785 mutex_unlock(&data->mutex);
786 return ret;
787 }
788
789 data->ev_enable_state = state;
790 mutex_unlock(&data->mutex);
791
792 return 0;
793 }
794
795 static const struct iio_mount_matrix *
bmg160_get_mount_matrix(const struct iio_dev * indio_dev,const struct iio_chan_spec * chan)796 bmg160_get_mount_matrix(const struct iio_dev *indio_dev,
797 const struct iio_chan_spec *chan)
798 {
799 struct bmg160_data *data = iio_priv(indio_dev);
800
801 return &data->orientation;
802 }
803
804 static const struct iio_chan_spec_ext_info bmg160_ext_info[] = {
805 IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, bmg160_get_mount_matrix),
806 { }
807 };
808
809 static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("100 200 400 1000 2000");
810
811 static IIO_CONST_ATTR(in_anglvel_scale_available,
812 "0.001065 0.000532 0.000266 0.000133 0.000066");
813
814 static struct attribute *bmg160_attributes[] = {
815 &iio_const_attr_sampling_frequency_available.dev_attr.attr,
816 &iio_const_attr_in_anglvel_scale_available.dev_attr.attr,
817 NULL,
818 };
819
820 static const struct attribute_group bmg160_attrs_group = {
821 .attrs = bmg160_attributes,
822 };
823
824 static const struct iio_event_spec bmg160_event = {
825 .type = IIO_EV_TYPE_ROC,
826 .dir = IIO_EV_DIR_EITHER,
827 .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
828 BIT(IIO_EV_INFO_ENABLE)
829 };
830
831 #define BMG160_CHANNEL(_axis) { \
832 .type = IIO_ANGL_VEL, \
833 .modified = 1, \
834 .channel2 = IIO_MOD_##_axis, \
835 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
836 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
837 BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
838 BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
839 .scan_index = AXIS_##_axis, \
840 .scan_type = { \
841 .sign = 's', \
842 .realbits = 16, \
843 .storagebits = 16, \
844 .endianness = IIO_LE, \
845 }, \
846 .ext_info = bmg160_ext_info, \
847 .event_spec = &bmg160_event, \
848 .num_event_specs = 1 \
849 }
850
851 static const struct iio_chan_spec bmg160_channels[] = {
852 {
853 .type = IIO_TEMP,
854 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
855 BIT(IIO_CHAN_INFO_SCALE) |
856 BIT(IIO_CHAN_INFO_OFFSET),
857 .scan_index = -1,
858 },
859 BMG160_CHANNEL(X),
860 BMG160_CHANNEL(Y),
861 BMG160_CHANNEL(Z),
862 IIO_CHAN_SOFT_TIMESTAMP(3),
863 };
864
865 static const struct iio_info bmg160_info = {
866 .attrs = &bmg160_attrs_group,
867 .read_raw = bmg160_read_raw,
868 .write_raw = bmg160_write_raw,
869 .read_event_value = bmg160_read_event,
870 .write_event_value = bmg160_write_event,
871 .write_event_config = bmg160_write_event_config,
872 .read_event_config = bmg160_read_event_config,
873 };
874
875 static const unsigned long bmg160_accel_scan_masks[] = {
876 BIT(AXIS_X) | BIT(AXIS_Y) | BIT(AXIS_Z),
877 0};
878
bmg160_trigger_handler(int irq,void * p)879 static irqreturn_t bmg160_trigger_handler(int irq, void *p)
880 {
881 struct iio_poll_func *pf = p;
882 struct iio_dev *indio_dev = pf->indio_dev;
883 struct bmg160_data *data = iio_priv(indio_dev);
884 int ret;
885
886 mutex_lock(&data->mutex);
887 ret = regmap_bulk_read(data->regmap, BMG160_REG_XOUT_L,
888 data->scan.chans, AXIS_MAX * 2);
889 mutex_unlock(&data->mutex);
890 if (ret < 0)
891 goto err;
892
893 iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
894 pf->timestamp);
895 err:
896 iio_trigger_notify_done(indio_dev->trig);
897
898 return IRQ_HANDLED;
899 }
900
bmg160_trig_reen(struct iio_trigger * trig)901 static void bmg160_trig_reen(struct iio_trigger *trig)
902 {
903 struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
904 struct bmg160_data *data = iio_priv(indio_dev);
905 struct device *dev = regmap_get_device(data->regmap);
906 int ret;
907
908 /* new data interrupts don't need ack */
909 if (data->dready_trigger_on)
910 return;
911
912 /* Set latched mode interrupt and clear any latched interrupt */
913 ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH,
914 BMG160_INT_MODE_LATCH_INT |
915 BMG160_INT_MODE_LATCH_RESET);
916 if (ret < 0)
917 dev_err(dev, "Error writing reg_rst_latch\n");
918 }
919
bmg160_data_rdy_trigger_set_state(struct iio_trigger * trig,bool state)920 static int bmg160_data_rdy_trigger_set_state(struct iio_trigger *trig,
921 bool state)
922 {
923 struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
924 struct bmg160_data *data = iio_priv(indio_dev);
925 int ret;
926
927 mutex_lock(&data->mutex);
928
929 if (!state && data->ev_enable_state && data->motion_trigger_on) {
930 data->motion_trigger_on = false;
931 mutex_unlock(&data->mutex);
932 return 0;
933 }
934
935 /*
936 * Refer to comment in bmg160_write_event_config for
937 * enable/disable operation order
938 */
939 ret = bmg160_set_power_state(data, state);
940 if (ret < 0) {
941 mutex_unlock(&data->mutex);
942 return ret;
943 }
944 if (data->motion_trig == trig)
945 ret = bmg160_setup_any_motion_interrupt(data, state);
946 else
947 ret = bmg160_setup_new_data_interrupt(data, state);
948 if (ret < 0) {
949 bmg160_set_power_state(data, false);
950 mutex_unlock(&data->mutex);
951 return ret;
952 }
953 if (data->motion_trig == trig)
954 data->motion_trigger_on = state;
955 else
956 data->dready_trigger_on = state;
957
958 mutex_unlock(&data->mutex);
959
960 return 0;
961 }
962
963 static const struct iio_trigger_ops bmg160_trigger_ops = {
964 .set_trigger_state = bmg160_data_rdy_trigger_set_state,
965 .reenable = bmg160_trig_reen,
966 };
967
bmg160_event_handler(int irq,void * private)968 static irqreturn_t bmg160_event_handler(int irq, void *private)
969 {
970 struct iio_dev *indio_dev = private;
971 struct bmg160_data *data = iio_priv(indio_dev);
972 struct device *dev = regmap_get_device(data->regmap);
973 int ret;
974 int dir;
975 unsigned int val;
976
977 ret = regmap_read(data->regmap, BMG160_REG_INT_STATUS_2, &val);
978 if (ret < 0) {
979 dev_err(dev, "Error reading reg_int_status2\n");
980 goto ack_intr_status;
981 }
982
983 if (val & 0x08)
984 dir = IIO_EV_DIR_RISING;
985 else
986 dir = IIO_EV_DIR_FALLING;
987
988 if (val & BMG160_ANY_MOTION_BIT_X)
989 iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ANGL_VEL,
990 0,
991 IIO_MOD_X,
992 IIO_EV_TYPE_ROC,
993 dir),
994 iio_get_time_ns(indio_dev));
995 if (val & BMG160_ANY_MOTION_BIT_Y)
996 iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ANGL_VEL,
997 0,
998 IIO_MOD_Y,
999 IIO_EV_TYPE_ROC,
1000 dir),
1001 iio_get_time_ns(indio_dev));
1002 if (val & BMG160_ANY_MOTION_BIT_Z)
1003 iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ANGL_VEL,
1004 0,
1005 IIO_MOD_Z,
1006 IIO_EV_TYPE_ROC,
1007 dir),
1008 iio_get_time_ns(indio_dev));
1009
1010 ack_intr_status:
1011 if (!data->dready_trigger_on) {
1012 ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH,
1013 BMG160_INT_MODE_LATCH_INT |
1014 BMG160_INT_MODE_LATCH_RESET);
1015 if (ret < 0)
1016 dev_err(dev, "Error writing reg_rst_latch\n");
1017 }
1018
1019 return IRQ_HANDLED;
1020 }
1021
bmg160_data_rdy_trig_poll(int irq,void * private)1022 static irqreturn_t bmg160_data_rdy_trig_poll(int irq, void *private)
1023 {
1024 struct iio_dev *indio_dev = private;
1025 struct bmg160_data *data = iio_priv(indio_dev);
1026
1027 if (data->dready_trigger_on)
1028 iio_trigger_poll(data->dready_trig);
1029 else if (data->motion_trigger_on)
1030 iio_trigger_poll(data->motion_trig);
1031
1032 if (data->ev_enable_state)
1033 return IRQ_WAKE_THREAD;
1034 else
1035 return IRQ_HANDLED;
1036
1037 }
1038
bmg160_buffer_preenable(struct iio_dev * indio_dev)1039 static int bmg160_buffer_preenable(struct iio_dev *indio_dev)
1040 {
1041 struct bmg160_data *data = iio_priv(indio_dev);
1042
1043 return bmg160_set_power_state(data, true);
1044 }
1045
bmg160_buffer_postdisable(struct iio_dev * indio_dev)1046 static int bmg160_buffer_postdisable(struct iio_dev *indio_dev)
1047 {
1048 struct bmg160_data *data = iio_priv(indio_dev);
1049
1050 return bmg160_set_power_state(data, false);
1051 }
1052
1053 static const struct iio_buffer_setup_ops bmg160_buffer_setup_ops = {
1054 .preenable = bmg160_buffer_preenable,
1055 .postdisable = bmg160_buffer_postdisable,
1056 };
1057
bmg160_match_acpi_device(struct device * dev)1058 static const char *bmg160_match_acpi_device(struct device *dev)
1059 {
1060 const struct acpi_device_id *id;
1061
1062 id = acpi_match_device(dev->driver->acpi_match_table, dev);
1063 if (!id)
1064 return NULL;
1065
1066 return dev_name(dev);
1067 }
1068
bmg160_core_probe(struct device * dev,struct regmap * regmap,int irq,const char * name)1069 int bmg160_core_probe(struct device *dev, struct regmap *regmap, int irq,
1070 const char *name)
1071 {
1072 static const char * const regulators[] = { "vdd", "vddio" };
1073 struct bmg160_data *data;
1074 struct iio_dev *indio_dev;
1075 int ret;
1076
1077 indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
1078 if (!indio_dev)
1079 return -ENOMEM;
1080
1081 data = iio_priv(indio_dev);
1082 dev_set_drvdata(dev, indio_dev);
1083 data->irq = irq;
1084 data->regmap = regmap;
1085
1086 ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(regulators),
1087 regulators);
1088 if (ret)
1089 return dev_err_probe(dev, ret, "Failed to get regulators\n");
1090
1091 ret = iio_read_mount_matrix(dev, &data->orientation);
1092 if (ret)
1093 return ret;
1094
1095 ret = bmg160_chip_init(data);
1096 if (ret < 0)
1097 return ret;
1098
1099 mutex_init(&data->mutex);
1100
1101 if (ACPI_HANDLE(dev))
1102 name = bmg160_match_acpi_device(dev);
1103
1104 indio_dev->channels = bmg160_channels;
1105 indio_dev->num_channels = ARRAY_SIZE(bmg160_channels);
1106 indio_dev->name = name;
1107 indio_dev->available_scan_masks = bmg160_accel_scan_masks;
1108 indio_dev->modes = INDIO_DIRECT_MODE;
1109 indio_dev->info = &bmg160_info;
1110
1111 if (data->irq > 0) {
1112 ret = devm_request_threaded_irq(dev,
1113 data->irq,
1114 bmg160_data_rdy_trig_poll,
1115 bmg160_event_handler,
1116 IRQF_TRIGGER_RISING,
1117 BMG160_IRQ_NAME,
1118 indio_dev);
1119 if (ret)
1120 return ret;
1121
1122 data->dready_trig = devm_iio_trigger_alloc(dev,
1123 "%s-dev%d",
1124 indio_dev->name,
1125 iio_device_id(indio_dev));
1126 if (!data->dready_trig)
1127 return -ENOMEM;
1128
1129 data->motion_trig = devm_iio_trigger_alloc(dev,
1130 "%s-any-motion-dev%d",
1131 indio_dev->name,
1132 iio_device_id(indio_dev));
1133 if (!data->motion_trig)
1134 return -ENOMEM;
1135
1136 data->dready_trig->ops = &bmg160_trigger_ops;
1137 iio_trigger_set_drvdata(data->dready_trig, indio_dev);
1138 ret = iio_trigger_register(data->dready_trig);
1139 if (ret)
1140 return ret;
1141
1142 data->motion_trig->ops = &bmg160_trigger_ops;
1143 iio_trigger_set_drvdata(data->motion_trig, indio_dev);
1144 ret = iio_trigger_register(data->motion_trig);
1145 if (ret) {
1146 data->motion_trig = NULL;
1147 goto err_trigger_unregister;
1148 }
1149 }
1150
1151 ret = iio_triggered_buffer_setup(indio_dev,
1152 iio_pollfunc_store_time,
1153 bmg160_trigger_handler,
1154 &bmg160_buffer_setup_ops);
1155 if (ret < 0) {
1156 dev_err(dev,
1157 "iio triggered buffer setup failed\n");
1158 goto err_trigger_unregister;
1159 }
1160
1161 ret = pm_runtime_set_active(dev);
1162 if (ret)
1163 goto err_buffer_cleanup;
1164
1165 pm_runtime_enable(dev);
1166 pm_runtime_set_autosuspend_delay(dev,
1167 BMG160_AUTO_SUSPEND_DELAY_MS);
1168 pm_runtime_use_autosuspend(dev);
1169
1170 ret = iio_device_register(indio_dev);
1171 if (ret < 0) {
1172 dev_err(dev, "unable to register iio device\n");
1173 goto err_pm_cleanup;
1174 }
1175
1176 return 0;
1177
1178 err_pm_cleanup:
1179 pm_runtime_dont_use_autosuspend(dev);
1180 pm_runtime_disable(dev);
1181 err_buffer_cleanup:
1182 iio_triggered_buffer_cleanup(indio_dev);
1183 err_trigger_unregister:
1184 if (data->dready_trig)
1185 iio_trigger_unregister(data->dready_trig);
1186 if (data->motion_trig)
1187 iio_trigger_unregister(data->motion_trig);
1188
1189 return ret;
1190 }
1191 EXPORT_SYMBOL_GPL(bmg160_core_probe);
1192
bmg160_core_remove(struct device * dev)1193 void bmg160_core_remove(struct device *dev)
1194 {
1195 struct iio_dev *indio_dev = dev_get_drvdata(dev);
1196 struct bmg160_data *data = iio_priv(indio_dev);
1197
1198 iio_device_unregister(indio_dev);
1199
1200 pm_runtime_disable(dev);
1201 pm_runtime_set_suspended(dev);
1202 pm_runtime_put_noidle(dev);
1203
1204 iio_triggered_buffer_cleanup(indio_dev);
1205
1206 if (data->dready_trig) {
1207 iio_trigger_unregister(data->dready_trig);
1208 iio_trigger_unregister(data->motion_trig);
1209 }
1210
1211 mutex_lock(&data->mutex);
1212 bmg160_set_mode(data, BMG160_MODE_DEEP_SUSPEND);
1213 mutex_unlock(&data->mutex);
1214 }
1215 EXPORT_SYMBOL_GPL(bmg160_core_remove);
1216
1217 #ifdef CONFIG_PM_SLEEP
bmg160_suspend(struct device * dev)1218 static int bmg160_suspend(struct device *dev)
1219 {
1220 struct iio_dev *indio_dev = dev_get_drvdata(dev);
1221 struct bmg160_data *data = iio_priv(indio_dev);
1222
1223 mutex_lock(&data->mutex);
1224 bmg160_set_mode(data, BMG160_MODE_SUSPEND);
1225 mutex_unlock(&data->mutex);
1226
1227 return 0;
1228 }
1229
bmg160_resume(struct device * dev)1230 static int bmg160_resume(struct device *dev)
1231 {
1232 struct iio_dev *indio_dev = dev_get_drvdata(dev);
1233 struct bmg160_data *data = iio_priv(indio_dev);
1234
1235 mutex_lock(&data->mutex);
1236 if (data->dready_trigger_on || data->motion_trigger_on ||
1237 data->ev_enable_state)
1238 bmg160_set_mode(data, BMG160_MODE_NORMAL);
1239 mutex_unlock(&data->mutex);
1240
1241 return 0;
1242 }
1243 #endif
1244
1245 #ifdef CONFIG_PM
bmg160_runtime_suspend(struct device * dev)1246 static int bmg160_runtime_suspend(struct device *dev)
1247 {
1248 struct iio_dev *indio_dev = dev_get_drvdata(dev);
1249 struct bmg160_data *data = iio_priv(indio_dev);
1250 int ret;
1251
1252 ret = bmg160_set_mode(data, BMG160_MODE_SUSPEND);
1253 if (ret < 0) {
1254 dev_err(dev, "set mode failed\n");
1255 return -EAGAIN;
1256 }
1257
1258 return 0;
1259 }
1260
bmg160_runtime_resume(struct device * dev)1261 static int bmg160_runtime_resume(struct device *dev)
1262 {
1263 struct iio_dev *indio_dev = dev_get_drvdata(dev);
1264 struct bmg160_data *data = iio_priv(indio_dev);
1265 int ret;
1266
1267 ret = bmg160_set_mode(data, BMG160_MODE_NORMAL);
1268 if (ret < 0)
1269 return ret;
1270
1271 msleep_interruptible(BMG160_MAX_STARTUP_TIME_MS);
1272
1273 return 0;
1274 }
1275 #endif
1276
1277 const struct dev_pm_ops bmg160_pm_ops = {
1278 SET_SYSTEM_SLEEP_PM_OPS(bmg160_suspend, bmg160_resume)
1279 SET_RUNTIME_PM_OPS(bmg160_runtime_suspend,
1280 bmg160_runtime_resume, NULL)
1281 };
1282 EXPORT_SYMBOL_GPL(bmg160_pm_ops);
1283
1284 MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
1285 MODULE_LICENSE("GPL v2");
1286 MODULE_DESCRIPTION("BMG160 Gyro driver");
1287