1 /******************************************************************************
2 *
3 * Module Name: evregion - Operation Region support
4 *
5 *****************************************************************************/
6
7 /*
8 * Copyright (C) 2000 - 2016, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44 #include "acpi.h"
45 #include "accommon.h"
46 #include "acevents.h"
47 #include "acnamesp.h"
48 #include "acinterp.h"
49
50 #define _COMPONENT ACPI_EVENTS
51 ACPI_MODULE_NAME ("evregion")
52
53
54 extern UINT8 AcpiGbl_DefaultAddressSpaces[];
55
56 /* Local prototypes */
57
58 static void
59 AcpiEvOrphanEcRegMethod (
60 ACPI_NAMESPACE_NODE *EcDeviceNode);
61
62 static ACPI_STATUS
63 AcpiEvRegRun (
64 ACPI_HANDLE ObjHandle,
65 UINT32 Level,
66 void *Context,
67 void **ReturnValue);
68
69
70 /*******************************************************************************
71 *
72 * FUNCTION: AcpiEvInitializeOpRegions
73 *
74 * PARAMETERS: None
75 *
76 * RETURN: Status
77 *
78 * DESCRIPTION: Execute _REG methods for all Operation Regions that have
79 * an installed default region handler.
80 *
81 ******************************************************************************/
82
83 ACPI_STATUS
AcpiEvInitializeOpRegions(void)84 AcpiEvInitializeOpRegions (
85 void)
86 {
87 ACPI_STATUS Status;
88 UINT32 i;
89
90
91 ACPI_FUNCTION_TRACE (EvInitializeOpRegions);
92
93
94 Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE);
95 if (ACPI_FAILURE (Status))
96 {
97 return_ACPI_STATUS (Status);
98 }
99
100 /* Run the _REG methods for OpRegions in each default address space */
101
102 for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++)
103 {
104 /*
105 * Make sure the installed handler is the DEFAULT handler. If not the
106 * default, the _REG methods will have already been run (when the
107 * handler was installed)
108 */
109 if (AcpiEvHasDefaultHandler (AcpiGbl_RootNode,
110 AcpiGbl_DefaultAddressSpaces[i]))
111 {
112 AcpiEvExecuteRegMethods (AcpiGbl_RootNode,
113 AcpiGbl_DefaultAddressSpaces[i], ACPI_REG_CONNECT);
114 }
115 }
116
117 (void) AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE);
118 return_ACPI_STATUS (Status);
119 }
120
121
122 /*******************************************************************************
123 *
124 * FUNCTION: AcpiEvAddressSpaceDispatch
125 *
126 * PARAMETERS: RegionObj - Internal region object
127 * FieldObj - Corresponding field. Can be NULL.
128 * Function - Read or Write operation
129 * RegionOffset - Where in the region to read or write
130 * BitWidth - Field width in bits (8, 16, 32, or 64)
131 * Value - Pointer to in or out value, must be
132 * a full 64-bit integer
133 *
134 * RETURN: Status
135 *
136 * DESCRIPTION: Dispatch an address space or operation region access to
137 * a previously installed handler.
138 *
139 * NOTE: During early initialization, we always install the default region
140 * handlers for Memory, I/O and PCI_Config. This ensures that these operation
141 * region address spaces are always available as per the ACPI specification.
142 * This is especially needed in order to support the execution of
143 * module-level AML code during loading of the ACPI tables.
144 *
145 ******************************************************************************/
146
147 ACPI_STATUS
AcpiEvAddressSpaceDispatch(ACPI_OPERAND_OBJECT * RegionObj,ACPI_OPERAND_OBJECT * FieldObj,UINT32 Function,UINT32 RegionOffset,UINT32 BitWidth,UINT64 * Value)148 AcpiEvAddressSpaceDispatch (
149 ACPI_OPERAND_OBJECT *RegionObj,
150 ACPI_OPERAND_OBJECT *FieldObj,
151 UINT32 Function,
152 UINT32 RegionOffset,
153 UINT32 BitWidth,
154 UINT64 *Value)
155 {
156 ACPI_STATUS Status;
157 ACPI_ADR_SPACE_HANDLER Handler;
158 ACPI_ADR_SPACE_SETUP RegionSetup;
159 ACPI_OPERAND_OBJECT *HandlerDesc;
160 ACPI_OPERAND_OBJECT *RegionObj2;
161 void *RegionContext = NULL;
162 ACPI_CONNECTION_INFO *Context;
163 ACPI_PHYSICAL_ADDRESS Address;
164
165
166 ACPI_FUNCTION_TRACE (EvAddressSpaceDispatch);
167
168
169 RegionObj2 = AcpiNsGetSecondaryObject (RegionObj);
170 if (!RegionObj2)
171 {
172 return_ACPI_STATUS (AE_NOT_EXIST);
173 }
174
175 /* Ensure that there is a handler associated with this region */
176
177 HandlerDesc = RegionObj->Region.Handler;
178 if (!HandlerDesc)
179 {
180 ACPI_ERROR ((AE_INFO,
181 "No handler for Region [%4.4s] (%p) [%s]",
182 AcpiUtGetNodeName (RegionObj->Region.Node),
183 RegionObj, AcpiUtGetRegionName (RegionObj->Region.SpaceId)));
184
185 return_ACPI_STATUS (AE_NOT_EXIST);
186 }
187
188 Context = HandlerDesc->AddressSpace.Context;
189
190 /*
191 * It may be the case that the region has never been initialized.
192 * Some types of regions require special init code
193 */
194 if (!(RegionObj->Region.Flags & AOPOBJ_SETUP_COMPLETE))
195 {
196 /* This region has not been initialized yet, do it */
197
198 RegionSetup = HandlerDesc->AddressSpace.Setup;
199 if (!RegionSetup)
200 {
201 /* No initialization routine, exit with error */
202
203 ACPI_ERROR ((AE_INFO,
204 "No init routine for region(%p) [%s]",
205 RegionObj, AcpiUtGetRegionName (RegionObj->Region.SpaceId)));
206 return_ACPI_STATUS (AE_NOT_EXIST);
207 }
208
209 /*
210 * We must exit the interpreter because the region setup will
211 * potentially execute control methods (for example, the _REG method
212 * for this region)
213 */
214 AcpiExExitInterpreter ();
215
216 Status = RegionSetup (RegionObj, ACPI_REGION_ACTIVATE,
217 Context, &RegionContext);
218
219 /* Re-enter the interpreter */
220
221 AcpiExEnterInterpreter ();
222
223 /* Check for failure of the Region Setup */
224
225 if (ACPI_FAILURE (Status))
226 {
227 ACPI_EXCEPTION ((AE_INFO, Status,
228 "During region initialization: [%s]",
229 AcpiUtGetRegionName (RegionObj->Region.SpaceId)));
230 return_ACPI_STATUS (Status);
231 }
232
233 /* Region initialization may have been completed by RegionSetup */
234
235 if (!(RegionObj->Region.Flags & AOPOBJ_SETUP_COMPLETE))
236 {
237 RegionObj->Region.Flags |= AOPOBJ_SETUP_COMPLETE;
238
239 /*
240 * Save the returned context for use in all accesses to
241 * the handler for this particular region
242 */
243 if (!(RegionObj2->Extra.RegionContext))
244 {
245 RegionObj2->Extra.RegionContext = RegionContext;
246 }
247 }
248 }
249
250 /* We have everything we need, we can invoke the address space handler */
251
252 Handler = HandlerDesc->AddressSpace.Handler;
253 Address = (RegionObj->Region.Address + RegionOffset);
254
255 /*
256 * Special handling for GenericSerialBus and GeneralPurposeIo:
257 * There are three extra parameters that must be passed to the
258 * handler via the context:
259 * 1) Connection buffer, a resource template from Connection() op
260 * 2) Length of the above buffer
261 * 3) Actual access length from the AccessAs() op
262 *
263 * In addition, for GeneralPurposeIo, the Address and BitWidth fields
264 * are defined as follows:
265 * 1) Address is the pin number index of the field (bit offset from
266 * the previous Connection)
267 * 2) BitWidth is the actual bit length of the field (number of pins)
268 */
269 if ((RegionObj->Region.SpaceId == ACPI_ADR_SPACE_GSBUS) &&
270 Context &&
271 FieldObj)
272 {
273 /* Get the Connection (ResourceTemplate) buffer */
274
275 Context->Connection = FieldObj->Field.ResourceBuffer;
276 Context->Length = FieldObj->Field.ResourceLength;
277 Context->AccessLength = FieldObj->Field.AccessLength;
278 }
279 if ((RegionObj->Region.SpaceId == ACPI_ADR_SPACE_GPIO) &&
280 Context &&
281 FieldObj)
282 {
283 /* Get the Connection (ResourceTemplate) buffer */
284
285 Context->Connection = FieldObj->Field.ResourceBuffer;
286 Context->Length = FieldObj->Field.ResourceLength;
287 Context->AccessLength = FieldObj->Field.AccessLength;
288 Address = FieldObj->Field.PinNumberIndex;
289 BitWidth = FieldObj->Field.BitLength;
290 }
291
292 ACPI_DEBUG_PRINT ((ACPI_DB_OPREGION,
293 "Handler %p (@%p) Address %8.8X%8.8X [%s]\n",
294 &RegionObj->Region.Handler->AddressSpace, Handler,
295 ACPI_FORMAT_UINT64 (Address),
296 AcpiUtGetRegionName (RegionObj->Region.SpaceId)));
297
298 if (!(HandlerDesc->AddressSpace.HandlerFlags &
299 ACPI_ADDR_HANDLER_DEFAULT_INSTALLED))
300 {
301 /*
302 * For handlers other than the default (supplied) handlers, we must
303 * exit the interpreter because the handler *might* block -- we don't
304 * know what it will do, so we can't hold the lock on the intepreter.
305 */
306 AcpiExExitInterpreter();
307 }
308
309 /* Call the handler */
310
311 Status = Handler (Function, Address, BitWidth, Value, Context,
312 RegionObj2->Extra.RegionContext);
313
314 if (ACPI_FAILURE (Status))
315 {
316 ACPI_EXCEPTION ((AE_INFO, Status, "Returned by Handler for [%s]",
317 AcpiUtGetRegionName (RegionObj->Region.SpaceId)));
318 }
319
320 if (!(HandlerDesc->AddressSpace.HandlerFlags &
321 ACPI_ADDR_HANDLER_DEFAULT_INSTALLED))
322 {
323 /*
324 * We just returned from a non-default handler, we must re-enter the
325 * interpreter
326 */
327 AcpiExEnterInterpreter ();
328 }
329
330 return_ACPI_STATUS (Status);
331 }
332
333
334 /*******************************************************************************
335 *
336 * FUNCTION: AcpiEvDetachRegion
337 *
338 * PARAMETERS: RegionObj - Region Object
339 * AcpiNsIsLocked - Namespace Region Already Locked?
340 *
341 * RETURN: None
342 *
343 * DESCRIPTION: Break the association between the handler and the region
344 * this is a two way association.
345 *
346 ******************************************************************************/
347
348 void
AcpiEvDetachRegion(ACPI_OPERAND_OBJECT * RegionObj,BOOLEAN AcpiNsIsLocked)349 AcpiEvDetachRegion (
350 ACPI_OPERAND_OBJECT *RegionObj,
351 BOOLEAN AcpiNsIsLocked)
352 {
353 ACPI_OPERAND_OBJECT *HandlerObj;
354 ACPI_OPERAND_OBJECT *ObjDesc;
355 ACPI_OPERAND_OBJECT *StartDesc;
356 ACPI_OPERAND_OBJECT **LastObjPtr;
357 ACPI_ADR_SPACE_SETUP RegionSetup;
358 void **RegionContext;
359 ACPI_OPERAND_OBJECT *RegionObj2;
360 ACPI_STATUS Status;
361
362
363 ACPI_FUNCTION_TRACE (EvDetachRegion);
364
365
366 RegionObj2 = AcpiNsGetSecondaryObject (RegionObj);
367 if (!RegionObj2)
368 {
369 return_VOID;
370 }
371 RegionContext = &RegionObj2->Extra.RegionContext;
372
373 /* Get the address handler from the region object */
374
375 HandlerObj = RegionObj->Region.Handler;
376 if (!HandlerObj)
377 {
378 /* This region has no handler, all done */
379
380 return_VOID;
381 }
382
383 /* Find this region in the handler's list */
384
385 ObjDesc = HandlerObj->AddressSpace.RegionList;
386 StartDesc = ObjDesc;
387 LastObjPtr = &HandlerObj->AddressSpace.RegionList;
388
389 while (ObjDesc)
390 {
391 /* Is this the correct Region? */
392
393 if (ObjDesc == RegionObj)
394 {
395 ACPI_DEBUG_PRINT ((ACPI_DB_OPREGION,
396 "Removing Region %p from address handler %p\n",
397 RegionObj, HandlerObj));
398
399 /* This is it, remove it from the handler's list */
400
401 *LastObjPtr = ObjDesc->Region.Next;
402 ObjDesc->Region.Next = NULL; /* Must clear field */
403
404 if (AcpiNsIsLocked)
405 {
406 Status = AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE);
407 if (ACPI_FAILURE (Status))
408 {
409 return_VOID;
410 }
411 }
412
413 /* Now stop region accesses by executing the _REG method */
414
415 Status = AcpiEvExecuteRegMethod (RegionObj, ACPI_REG_DISCONNECT);
416 if (ACPI_FAILURE (Status))
417 {
418 ACPI_EXCEPTION ((AE_INFO, Status, "from region _REG, [%s]",
419 AcpiUtGetRegionName (RegionObj->Region.SpaceId)));
420 }
421
422 if (AcpiNsIsLocked)
423 {
424 Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE);
425 if (ACPI_FAILURE (Status))
426 {
427 return_VOID;
428 }
429 }
430
431 /*
432 * If the region has been activated, call the setup handler with
433 * the deactivate notification
434 */
435 if (RegionObj->Region.Flags & AOPOBJ_SETUP_COMPLETE)
436 {
437 RegionSetup = HandlerObj->AddressSpace.Setup;
438 Status = RegionSetup (RegionObj, ACPI_REGION_DEACTIVATE,
439 HandlerObj->AddressSpace.Context, RegionContext);
440
441 /*
442 * RegionContext should have been released by the deactivate
443 * operation. We don't need access to it anymore here.
444 */
445 if (RegionContext)
446 {
447 *RegionContext = NULL;
448 }
449
450 /* Init routine may fail, Just ignore errors */
451
452 if (ACPI_FAILURE (Status))
453 {
454 ACPI_EXCEPTION ((AE_INFO, Status,
455 "from region handler - deactivate, [%s]",
456 AcpiUtGetRegionName (RegionObj->Region.SpaceId)));
457 }
458
459 RegionObj->Region.Flags &= ~(AOPOBJ_SETUP_COMPLETE);
460 }
461
462 /*
463 * Remove handler reference in the region
464 *
465 * NOTE: this doesn't mean that the region goes away, the region
466 * is just inaccessible as indicated to the _REG method
467 *
468 * If the region is on the handler's list, this must be the
469 * region's handler
470 */
471 RegionObj->Region.Handler = NULL;
472 AcpiUtRemoveReference (HandlerObj);
473
474 return_VOID;
475 }
476
477 /* Walk the linked list of handlers */
478
479 LastObjPtr = &ObjDesc->Region.Next;
480 ObjDesc = ObjDesc->Region.Next;
481
482 /* Prevent infinite loop if list is corrupted */
483
484 if (ObjDesc == StartDesc)
485 {
486 ACPI_ERROR ((AE_INFO,
487 "Circular handler list in region object %p",
488 RegionObj));
489 return_VOID;
490 }
491 }
492
493 /* If we get here, the region was not in the handler's region list */
494
495 ACPI_DEBUG_PRINT ((ACPI_DB_OPREGION,
496 "Cannot remove region %p from address handler %p\n",
497 RegionObj, HandlerObj));
498
499 return_VOID;
500 }
501
502
503 /*******************************************************************************
504 *
505 * FUNCTION: AcpiEvAttachRegion
506 *
507 * PARAMETERS: HandlerObj - Handler Object
508 * RegionObj - Region Object
509 * AcpiNsIsLocked - Namespace Region Already Locked?
510 *
511 * RETURN: None
512 *
513 * DESCRIPTION: Create the association between the handler and the region
514 * this is a two way association.
515 *
516 ******************************************************************************/
517
518 ACPI_STATUS
AcpiEvAttachRegion(ACPI_OPERAND_OBJECT * HandlerObj,ACPI_OPERAND_OBJECT * RegionObj,BOOLEAN AcpiNsIsLocked)519 AcpiEvAttachRegion (
520 ACPI_OPERAND_OBJECT *HandlerObj,
521 ACPI_OPERAND_OBJECT *RegionObj,
522 BOOLEAN AcpiNsIsLocked)
523 {
524
525 ACPI_FUNCTION_TRACE (EvAttachRegion);
526
527
528 /* Install the region's handler */
529
530 if (RegionObj->Region.Handler)
531 {
532 return_ACPI_STATUS (AE_ALREADY_EXISTS);
533 }
534
535 ACPI_DEBUG_PRINT ((ACPI_DB_OPREGION,
536 "Adding Region [%4.4s] %p to address handler %p [%s]\n",
537 AcpiUtGetNodeName (RegionObj->Region.Node),
538 RegionObj, HandlerObj,
539 AcpiUtGetRegionName (RegionObj->Region.SpaceId)));
540
541 /* Link this region to the front of the handler's list */
542
543 RegionObj->Region.Next = HandlerObj->AddressSpace.RegionList;
544 HandlerObj->AddressSpace.RegionList = RegionObj;
545 RegionObj->Region.Handler = HandlerObj;
546 AcpiUtAddReference (HandlerObj);
547
548 return_ACPI_STATUS (AE_OK);
549 }
550
551
552 /*******************************************************************************
553 *
554 * FUNCTION: AcpiEvExecuteRegMethod
555 *
556 * PARAMETERS: RegionObj - Region object
557 * Function - Passed to _REG: On (1) or Off (0)
558 *
559 * RETURN: Status
560 *
561 * DESCRIPTION: Execute _REG method for a region
562 *
563 ******************************************************************************/
564
565 ACPI_STATUS
AcpiEvExecuteRegMethod(ACPI_OPERAND_OBJECT * RegionObj,UINT32 Function)566 AcpiEvExecuteRegMethod (
567 ACPI_OPERAND_OBJECT *RegionObj,
568 UINT32 Function)
569 {
570 ACPI_EVALUATE_INFO *Info;
571 ACPI_OPERAND_OBJECT *Args[3];
572 ACPI_OPERAND_OBJECT *RegionObj2;
573 const ACPI_NAME *RegNamePtr = ACPI_CAST_PTR (ACPI_NAME, METHOD_NAME__REG);
574 ACPI_NAMESPACE_NODE *MethodNode;
575 ACPI_NAMESPACE_NODE *Node;
576 ACPI_STATUS Status;
577
578
579 ACPI_FUNCTION_TRACE (EvExecuteRegMethod);
580
581
582 if (!AcpiGbl_NamespaceInitialized ||
583 RegionObj->Region.Handler == NULL)
584 {
585 return_ACPI_STATUS (AE_OK);
586 }
587
588 RegionObj2 = AcpiNsGetSecondaryObject (RegionObj);
589 if (!RegionObj2)
590 {
591 return_ACPI_STATUS (AE_NOT_EXIST);
592 }
593
594 /*
595 * Find any "_REG" method associated with this region definition.
596 * The method should always be updated as this function may be
597 * invoked after a namespace change.
598 */
599 Node = RegionObj->Region.Node->Parent;
600 Status = AcpiNsSearchOneScope (
601 *RegNamePtr, Node, ACPI_TYPE_METHOD, &MethodNode);
602 if (ACPI_SUCCESS (Status))
603 {
604 /*
605 * The _REG method is optional and there can be only one per
606 * region definition. This will be executed when the handler is
607 * attached or removed.
608 */
609 RegionObj2->Extra.Method_REG = MethodNode;
610 }
611 if (RegionObj2->Extra.Method_REG == NULL)
612 {
613 return_ACPI_STATUS (AE_OK);
614 }
615
616 /* _REG(DISCONNECT) should be paired with _REG(CONNECT) */
617
618 if ((Function == ACPI_REG_CONNECT &&
619 RegionObj->Common.Flags & AOPOBJ_REG_CONNECTED) ||
620 (Function == ACPI_REG_DISCONNECT &&
621 !(RegionObj->Common.Flags & AOPOBJ_REG_CONNECTED)))
622 {
623 return_ACPI_STATUS (AE_OK);
624 }
625
626 /* Allocate and initialize the evaluation information block */
627
628 Info = ACPI_ALLOCATE_ZEROED (sizeof (ACPI_EVALUATE_INFO));
629 if (!Info)
630 {
631 return_ACPI_STATUS (AE_NO_MEMORY);
632 }
633
634 Info->PrefixNode = RegionObj2->Extra.Method_REG;
635 Info->RelativePathname = NULL;
636 Info->Parameters = Args;
637 Info->Flags = ACPI_IGNORE_RETURN_VALUE;
638
639 /*
640 * The _REG method has two arguments:
641 *
642 * Arg0 - Integer:
643 * Operation region space ID Same value as RegionObj->Region.SpaceId
644 *
645 * Arg1 - Integer:
646 * connection status 1 for connecting the handler, 0 for disconnecting
647 * the handler (Passed as a parameter)
648 */
649 Args[0] = AcpiUtCreateIntegerObject ((UINT64) RegionObj->Region.SpaceId);
650 if (!Args[0])
651 {
652 Status = AE_NO_MEMORY;
653 goto Cleanup1;
654 }
655
656 Args[1] = AcpiUtCreateIntegerObject ((UINT64) Function);
657 if (!Args[1])
658 {
659 Status = AE_NO_MEMORY;
660 goto Cleanup2;
661 }
662
663 Args[2] = NULL; /* Terminate list */
664
665 /* Execute the method, no return value */
666
667 ACPI_DEBUG_EXEC (
668 AcpiUtDisplayInitPathname (ACPI_TYPE_METHOD, Info->PrefixNode, NULL));
669
670 Status = AcpiNsEvaluate (Info);
671 AcpiUtRemoveReference (Args[1]);
672
673 if (ACPI_FAILURE (Status))
674 {
675 goto Cleanup2;
676 }
677
678 if (Function == ACPI_REG_CONNECT)
679 {
680 RegionObj->Common.Flags |= AOPOBJ_REG_CONNECTED;
681 }
682 else
683 {
684 RegionObj->Common.Flags &= ~AOPOBJ_REG_CONNECTED;
685 }
686
687 Cleanup2:
688 AcpiUtRemoveReference (Args[0]);
689
690 Cleanup1:
691 ACPI_FREE (Info);
692 return_ACPI_STATUS (Status);
693 }
694
695
696 /*******************************************************************************
697 *
698 * FUNCTION: AcpiEvExecuteRegMethods
699 *
700 * PARAMETERS: Node - Namespace node for the device
701 * SpaceId - The address space ID
702 * Function - Passed to _REG: On (1) or Off (0)
703 *
704 * RETURN: None
705 *
706 * DESCRIPTION: Run all _REG methods for the input Space ID;
707 * Note: assumes namespace is locked, or system init time.
708 *
709 ******************************************************************************/
710
711 void
AcpiEvExecuteRegMethods(ACPI_NAMESPACE_NODE * Node,ACPI_ADR_SPACE_TYPE SpaceId,UINT32 Function)712 AcpiEvExecuteRegMethods (
713 ACPI_NAMESPACE_NODE *Node,
714 ACPI_ADR_SPACE_TYPE SpaceId,
715 UINT32 Function)
716 {
717 ACPI_REG_WALK_INFO Info;
718
719
720 ACPI_FUNCTION_TRACE (EvExecuteRegMethods);
721
722 Info.SpaceId = SpaceId;
723 Info.Function = Function;
724 Info.RegRunCount = 0;
725
726 ACPI_DEBUG_PRINT_RAW ((ACPI_DB_NAMES,
727 " Running _REG methods for SpaceId %s\n",
728 AcpiUtGetRegionName (Info.SpaceId)));
729
730 /*
731 * Run all _REG methods for all Operation Regions for this space ID. This
732 * is a separate walk in order to handle any interdependencies between
733 * regions and _REG methods. (i.e. handlers must be installed for all
734 * regions of this Space ID before we can run any _REG methods)
735 */
736 (void) AcpiNsWalkNamespace (ACPI_TYPE_ANY, Node, ACPI_UINT32_MAX,
737 ACPI_NS_WALK_UNLOCK, AcpiEvRegRun, NULL, &Info, NULL);
738
739 /* Special case for EC: handle "orphan" _REG methods with no region */
740
741 if (SpaceId == ACPI_ADR_SPACE_EC)
742 {
743 AcpiEvOrphanEcRegMethod (Node);
744 }
745
746 ACPI_DEBUG_PRINT_RAW ((ACPI_DB_NAMES,
747 " Executed %u _REG methods for SpaceId %s\n",
748 Info.RegRunCount, AcpiUtGetRegionName (Info.SpaceId)));
749
750 return_VOID;
751 }
752
753
754 /*******************************************************************************
755 *
756 * FUNCTION: AcpiEvRegRun
757 *
758 * PARAMETERS: WalkNamespace callback
759 *
760 * DESCRIPTION: Run _REG method for region objects of the requested spaceID
761 *
762 ******************************************************************************/
763
764 static ACPI_STATUS
AcpiEvRegRun(ACPI_HANDLE ObjHandle,UINT32 Level,void * Context,void ** ReturnValue)765 AcpiEvRegRun (
766 ACPI_HANDLE ObjHandle,
767 UINT32 Level,
768 void *Context,
769 void **ReturnValue)
770 {
771 ACPI_OPERAND_OBJECT *ObjDesc;
772 ACPI_NAMESPACE_NODE *Node;
773 ACPI_STATUS Status;
774 ACPI_REG_WALK_INFO *Info;
775
776
777 Info = ACPI_CAST_PTR (ACPI_REG_WALK_INFO, Context);
778
779 /* Convert and validate the device handle */
780
781 Node = AcpiNsValidateHandle (ObjHandle);
782 if (!Node)
783 {
784 return (AE_BAD_PARAMETER);
785 }
786
787 /*
788 * We only care about regions.and objects that are allowed to have address
789 * space handlers
790 */
791 if ((Node->Type != ACPI_TYPE_REGION) &&
792 (Node != AcpiGbl_RootNode))
793 {
794 return (AE_OK);
795 }
796
797 /* Check for an existing internal object */
798
799 ObjDesc = AcpiNsGetAttachedObject (Node);
800 if (!ObjDesc)
801 {
802 /* No object, just exit */
803
804 return (AE_OK);
805 }
806
807 /* Object is a Region */
808
809 if (ObjDesc->Region.SpaceId != Info->SpaceId)
810 {
811 /* This region is for a different address space, just ignore it */
812
813 return (AE_OK);
814 }
815
816 Info->RegRunCount++;
817 Status = AcpiEvExecuteRegMethod (ObjDesc, Info->Function);
818 return (Status);
819 }
820
821
822 /*******************************************************************************
823 *
824 * FUNCTION: AcpiEvOrphanEcRegMethod
825 *
826 * PARAMETERS: EcDeviceNode - Namespace node for an EC device
827 *
828 * RETURN: None
829 *
830 * DESCRIPTION: Execute an "orphan" _REG method that appears under the EC
831 * device. This is a _REG method that has no corresponding region
832 * within the EC device scope. The orphan _REG method appears to
833 * have been enabled by the description of the ECDT in the ACPI
834 * specification: "The availability of the region space can be
835 * detected by providing a _REG method object underneath the
836 * Embedded Controller device."
837 *
838 * To quickly access the EC device, we use the EcDeviceNode used
839 * during EC handler installation. Otherwise, we would need to
840 * perform a time consuming namespace walk, executing _HID
841 * methods to find the EC device.
842 *
843 * MUTEX: Assumes the namespace is locked
844 *
845 ******************************************************************************/
846
847 static void
AcpiEvOrphanEcRegMethod(ACPI_NAMESPACE_NODE * EcDeviceNode)848 AcpiEvOrphanEcRegMethod (
849 ACPI_NAMESPACE_NODE *EcDeviceNode)
850 {
851 ACPI_HANDLE RegMethod;
852 ACPI_NAMESPACE_NODE *NextNode;
853 ACPI_STATUS Status;
854 ACPI_OBJECT_LIST Args;
855 ACPI_OBJECT Objects[2];
856
857
858 ACPI_FUNCTION_TRACE (EvOrphanEcRegMethod);
859
860
861 if (!EcDeviceNode)
862 {
863 return_VOID;
864 }
865
866 /* Namespace is currently locked, must release */
867
868 (void) AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE);
869
870 /* Get a handle to a _REG method immediately under the EC device */
871
872 Status = AcpiGetHandle (EcDeviceNode, METHOD_NAME__REG, &RegMethod);
873 if (ACPI_FAILURE (Status))
874 {
875 goto Exit; /* There is no _REG method present */
876 }
877
878 /*
879 * Execute the _REG method only if there is no Operation Region in
880 * this scope with the Embedded Controller space ID. Otherwise, it
881 * will already have been executed. Note, this allows for Regions
882 * with other space IDs to be present; but the code below will then
883 * execute the _REG method with the EmbeddedControl SpaceID argument.
884 */
885 NextNode = AcpiNsGetNextNode (EcDeviceNode, NULL);
886 while (NextNode)
887 {
888 if ((NextNode->Type == ACPI_TYPE_REGION) &&
889 (NextNode->Object) &&
890 (NextNode->Object->Region.SpaceId == ACPI_ADR_SPACE_EC))
891 {
892 goto Exit; /* Do not execute the _REG */
893 }
894
895 NextNode = AcpiNsGetNextNode (EcDeviceNode, NextNode);
896 }
897
898 /* Evaluate the _REG(EmbeddedControl,Connect) method */
899
900 Args.Count = 2;
901 Args.Pointer = Objects;
902 Objects[0].Type = ACPI_TYPE_INTEGER;
903 Objects[0].Integer.Value = ACPI_ADR_SPACE_EC;
904 Objects[1].Type = ACPI_TYPE_INTEGER;
905 Objects[1].Integer.Value = ACPI_REG_CONNECT;
906
907 Status = AcpiEvaluateObject (RegMethod, NULL, &Args, NULL);
908
909 Exit:
910 /* We ignore all errors from above, don't care */
911
912 Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE);
913 return_VOID;
914 }
915