1 /******************************************************************************
2 *
3 * Module Name: evrgnini- ACPI AddressSpace (OpRegion) init
4 *
5 *****************************************************************************/
6
7 /*
8 * Copyright (C) 2000 - 2016, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44 #include "acpi.h"
45 #include "accommon.h"
46 #include "acevents.h"
47 #include "acnamesp.h"
48
49 #define _COMPONENT ACPI_EVENTS
50 ACPI_MODULE_NAME ("evrgnini")
51
52 /* Local prototypes */
53
54 static BOOLEAN
55 AcpiEvIsPciRootBridge (
56 ACPI_NAMESPACE_NODE *Node);
57
58
59 /*******************************************************************************
60 *
61 * FUNCTION: AcpiEvSystemMemoryRegionSetup
62 *
63 * PARAMETERS: Handle - Region we are interested in
64 * Function - Start or stop
65 * HandlerContext - Address space handler context
66 * RegionContext - Region specific context
67 *
68 * RETURN: Status
69 *
70 * DESCRIPTION: Setup a SystemMemory operation region
71 *
72 ******************************************************************************/
73
74 ACPI_STATUS
AcpiEvSystemMemoryRegionSetup(ACPI_HANDLE Handle,UINT32 Function,void * HandlerContext,void ** RegionContext)75 AcpiEvSystemMemoryRegionSetup (
76 ACPI_HANDLE Handle,
77 UINT32 Function,
78 void *HandlerContext,
79 void **RegionContext)
80 {
81 ACPI_OPERAND_OBJECT *RegionDesc = (ACPI_OPERAND_OBJECT *) Handle;
82 ACPI_MEM_SPACE_CONTEXT *LocalRegionContext;
83
84
85 ACPI_FUNCTION_TRACE (EvSystemMemoryRegionSetup);
86
87
88 if (Function == ACPI_REGION_DEACTIVATE)
89 {
90 if (*RegionContext)
91 {
92 LocalRegionContext = (ACPI_MEM_SPACE_CONTEXT *) *RegionContext;
93
94 /* Delete a cached mapping if present */
95
96 if (LocalRegionContext->MappedLength)
97 {
98 AcpiOsUnmapMemory (LocalRegionContext->MappedLogicalAddress,
99 LocalRegionContext->MappedLength);
100 }
101 ACPI_FREE (LocalRegionContext);
102 *RegionContext = NULL;
103 }
104 return_ACPI_STATUS (AE_OK);
105 }
106
107 /* Create a new context */
108
109 LocalRegionContext = ACPI_ALLOCATE_ZEROED (sizeof (ACPI_MEM_SPACE_CONTEXT));
110 if (!(LocalRegionContext))
111 {
112 return_ACPI_STATUS (AE_NO_MEMORY);
113 }
114
115 /* Save the region length and address for use in the handler */
116
117 LocalRegionContext->Length = RegionDesc->Region.Length;
118 LocalRegionContext->Address = RegionDesc->Region.Address;
119
120 *RegionContext = LocalRegionContext;
121 return_ACPI_STATUS (AE_OK);
122 }
123
124
125 /*******************************************************************************
126 *
127 * FUNCTION: AcpiEvIoSpaceRegionSetup
128 *
129 * PARAMETERS: Handle - Region we are interested in
130 * Function - Start or stop
131 * HandlerContext - Address space handler context
132 * RegionContext - Region specific context
133 *
134 * RETURN: Status
135 *
136 * DESCRIPTION: Setup a IO operation region
137 *
138 ******************************************************************************/
139
140 ACPI_STATUS
AcpiEvIoSpaceRegionSetup(ACPI_HANDLE Handle,UINT32 Function,void * HandlerContext,void ** RegionContext)141 AcpiEvIoSpaceRegionSetup (
142 ACPI_HANDLE Handle,
143 UINT32 Function,
144 void *HandlerContext,
145 void **RegionContext)
146 {
147 ACPI_FUNCTION_TRACE (EvIoSpaceRegionSetup);
148
149
150 if (Function == ACPI_REGION_DEACTIVATE)
151 {
152 *RegionContext = NULL;
153 }
154 else
155 {
156 *RegionContext = HandlerContext;
157 }
158
159 return_ACPI_STATUS (AE_OK);
160 }
161
162
163 /*******************************************************************************
164 *
165 * FUNCTION: AcpiEvPciConfigRegionSetup
166 *
167 * PARAMETERS: Handle - Region we are interested in
168 * Function - Start or stop
169 * HandlerContext - Address space handler context
170 * RegionContext - Region specific context
171 *
172 * RETURN: Status
173 *
174 * DESCRIPTION: Setup a PCI_Config operation region
175 *
176 * MUTEX: Assumes namespace is not locked
177 *
178 ******************************************************************************/
179
180 ACPI_STATUS
AcpiEvPciConfigRegionSetup(ACPI_HANDLE Handle,UINT32 Function,void * HandlerContext,void ** RegionContext)181 AcpiEvPciConfigRegionSetup (
182 ACPI_HANDLE Handle,
183 UINT32 Function,
184 void *HandlerContext,
185 void **RegionContext)
186 {
187 ACPI_STATUS Status = AE_OK;
188 UINT64 PciValue;
189 ACPI_PCI_ID *PciId = *RegionContext;
190 ACPI_OPERAND_OBJECT *HandlerObj;
191 ACPI_NAMESPACE_NODE *ParentNode;
192 ACPI_NAMESPACE_NODE *PciRootNode;
193 ACPI_NAMESPACE_NODE *PciDeviceNode;
194 ACPI_OPERAND_OBJECT *RegionObj = (ACPI_OPERAND_OBJECT *) Handle;
195
196
197 ACPI_FUNCTION_TRACE (EvPciConfigRegionSetup);
198
199
200 HandlerObj = RegionObj->Region.Handler;
201 if (!HandlerObj)
202 {
203 /*
204 * No installed handler. This shouldn't happen because the dispatch
205 * routine checks before we get here, but we check again just in case.
206 */
207 ACPI_DEBUG_PRINT ((ACPI_DB_OPREGION,
208 "Attempting to init a region %p, with no handler\n", RegionObj));
209 return_ACPI_STATUS (AE_NOT_EXIST);
210 }
211
212 *RegionContext = NULL;
213 if (Function == ACPI_REGION_DEACTIVATE)
214 {
215 if (PciId)
216 {
217 ACPI_FREE (PciId);
218 }
219 return_ACPI_STATUS (Status);
220 }
221
222 ParentNode = RegionObj->Region.Node->Parent;
223
224 /*
225 * Get the _SEG and _BBN values from the device upon which the handler
226 * is installed.
227 *
228 * We need to get the _SEG and _BBN objects relative to the PCI BUS device.
229 * This is the device the handler has been registered to handle.
230 */
231
232 /*
233 * If the AddressSpace.Node is still pointing to the root, we need
234 * to scan upward for a PCI Root bridge and re-associate the OpRegion
235 * handlers with that device.
236 */
237 if (HandlerObj->AddressSpace.Node == AcpiGbl_RootNode)
238 {
239 /* Start search from the parent object */
240
241 PciRootNode = ParentNode;
242 while (PciRootNode != AcpiGbl_RootNode)
243 {
244 /* Get the _HID/_CID in order to detect a RootBridge */
245
246 if (AcpiEvIsPciRootBridge (PciRootNode))
247 {
248 /* Install a handler for this PCI root bridge */
249
250 Status = AcpiInstallAddressSpaceHandler (
251 (ACPI_HANDLE) PciRootNode,
252 ACPI_ADR_SPACE_PCI_CONFIG,
253 ACPI_DEFAULT_HANDLER, NULL, NULL);
254 if (ACPI_FAILURE (Status))
255 {
256 if (Status == AE_SAME_HANDLER)
257 {
258 /*
259 * It is OK if the handler is already installed on the
260 * root bridge. Still need to return a context object
261 * for the new PCI_Config operation region, however.
262 */
263 Status = AE_OK;
264 }
265 else
266 {
267 ACPI_EXCEPTION ((AE_INFO, Status,
268 "Could not install PciConfig handler "
269 "for Root Bridge %4.4s",
270 AcpiUtGetNodeName (PciRootNode)));
271 }
272 }
273 break;
274 }
275
276 PciRootNode = PciRootNode->Parent;
277 }
278
279 /* PCI root bridge not found, use namespace root node */
280 }
281 else
282 {
283 PciRootNode = HandlerObj->AddressSpace.Node;
284 }
285
286 /*
287 * If this region is now initialized, we are done.
288 * (InstallAddressSpaceHandler could have initialized it)
289 */
290 if (RegionObj->Region.Flags & AOPOBJ_SETUP_COMPLETE)
291 {
292 return_ACPI_STATUS (AE_OK);
293 }
294
295 /* Region is still not initialized. Create a new context */
296
297 PciId = ACPI_ALLOCATE_ZEROED (sizeof (ACPI_PCI_ID));
298 if (!PciId)
299 {
300 return_ACPI_STATUS (AE_NO_MEMORY);
301 }
302
303 /*
304 * For PCI_Config space access, we need the segment, bus, device and
305 * function numbers. Acquire them here.
306 *
307 * Find the parent device object. (This allows the operation region to be
308 * within a subscope under the device, such as a control method.)
309 */
310 PciDeviceNode = RegionObj->Region.Node;
311 while (PciDeviceNode && (PciDeviceNode->Type != ACPI_TYPE_DEVICE))
312 {
313 PciDeviceNode = PciDeviceNode->Parent;
314 }
315
316 if (!PciDeviceNode)
317 {
318 ACPI_FREE (PciId);
319 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
320 }
321
322 /*
323 * Get the PCI device and function numbers from the _ADR object
324 * contained in the parent's scope.
325 */
326 Status = AcpiUtEvaluateNumericObject (METHOD_NAME__ADR,
327 PciDeviceNode, &PciValue);
328
329 /*
330 * The default is zero, and since the allocation above zeroed the data,
331 * just do nothing on failure.
332 */
333 if (ACPI_SUCCESS (Status))
334 {
335 PciId->Device = ACPI_HIWORD (ACPI_LODWORD (PciValue));
336 PciId->Function = ACPI_LOWORD (ACPI_LODWORD (PciValue));
337 }
338
339 /* The PCI segment number comes from the _SEG method */
340
341 Status = AcpiUtEvaluateNumericObject (METHOD_NAME__SEG,
342 PciRootNode, &PciValue);
343 if (ACPI_SUCCESS (Status))
344 {
345 PciId->Segment = ACPI_LOWORD (PciValue);
346 }
347
348 /* The PCI bus number comes from the _BBN method */
349
350 Status = AcpiUtEvaluateNumericObject (METHOD_NAME__BBN,
351 PciRootNode, &PciValue);
352 if (ACPI_SUCCESS (Status))
353 {
354 PciId->Bus = ACPI_LOWORD (PciValue);
355 }
356
357 /* Complete/update the PCI ID for this device */
358
359 Status = AcpiHwDerivePciId (PciId, PciRootNode, RegionObj->Region.Node);
360 if (ACPI_FAILURE (Status))
361 {
362 ACPI_FREE (PciId);
363 return_ACPI_STATUS (Status);
364 }
365
366 *RegionContext = PciId;
367 return_ACPI_STATUS (AE_OK);
368 }
369
370
371 /*******************************************************************************
372 *
373 * FUNCTION: AcpiEvIsPciRootBridge
374 *
375 * PARAMETERS: Node - Device node being examined
376 *
377 * RETURN: TRUE if device is a PCI/PCI-Express Root Bridge
378 *
379 * DESCRIPTION: Determine if the input device represents a PCI Root Bridge by
380 * examining the _HID and _CID for the device.
381 *
382 ******************************************************************************/
383
384 static BOOLEAN
AcpiEvIsPciRootBridge(ACPI_NAMESPACE_NODE * Node)385 AcpiEvIsPciRootBridge (
386 ACPI_NAMESPACE_NODE *Node)
387 {
388 ACPI_STATUS Status;
389 ACPI_PNP_DEVICE_ID *Hid;
390 ACPI_PNP_DEVICE_ID_LIST *Cid;
391 UINT32 i;
392 BOOLEAN Match;
393
394
395 /* Get the _HID and check for a PCI Root Bridge */
396
397 Status = AcpiUtExecute_HID (Node, &Hid);
398 if (ACPI_FAILURE (Status))
399 {
400 return (FALSE);
401 }
402
403 Match = AcpiUtIsPciRootBridge (Hid->String);
404 ACPI_FREE (Hid);
405
406 if (Match)
407 {
408 return (TRUE);
409 }
410
411 /* The _HID did not match. Get the _CID and check for a PCI Root Bridge */
412
413 Status = AcpiUtExecute_CID (Node, &Cid);
414 if (ACPI_FAILURE (Status))
415 {
416 return (FALSE);
417 }
418
419 /* Check all _CIDs in the returned list */
420
421 for (i = 0; i < Cid->Count; i++)
422 {
423 if (AcpiUtIsPciRootBridge (Cid->Ids[i].String))
424 {
425 ACPI_FREE (Cid);
426 return (TRUE);
427 }
428 }
429
430 ACPI_FREE (Cid);
431 return (FALSE);
432 }
433
434
435 /*******************************************************************************
436 *
437 * FUNCTION: AcpiEvPciBarRegionSetup
438 *
439 * PARAMETERS: Handle - Region we are interested in
440 * Function - Start or stop
441 * HandlerContext - Address space handler context
442 * RegionContext - Region specific context
443 *
444 * RETURN: Status
445 *
446 * DESCRIPTION: Setup a PciBAR operation region
447 *
448 * MUTEX: Assumes namespace is not locked
449 *
450 ******************************************************************************/
451
452 ACPI_STATUS
AcpiEvPciBarRegionSetup(ACPI_HANDLE Handle,UINT32 Function,void * HandlerContext,void ** RegionContext)453 AcpiEvPciBarRegionSetup (
454 ACPI_HANDLE Handle,
455 UINT32 Function,
456 void *HandlerContext,
457 void **RegionContext)
458 {
459 ACPI_FUNCTION_TRACE (EvPciBarRegionSetup);
460
461
462 return_ACPI_STATUS (AE_OK);
463 }
464
465
466 /*******************************************************************************
467 *
468 * FUNCTION: AcpiEvCmosRegionSetup
469 *
470 * PARAMETERS: Handle - Region we are interested in
471 * Function - Start or stop
472 * HandlerContext - Address space handler context
473 * RegionContext - Region specific context
474 *
475 * RETURN: Status
476 *
477 * DESCRIPTION: Setup a CMOS operation region
478 *
479 * MUTEX: Assumes namespace is not locked
480 *
481 ******************************************************************************/
482
483 ACPI_STATUS
AcpiEvCmosRegionSetup(ACPI_HANDLE Handle,UINT32 Function,void * HandlerContext,void ** RegionContext)484 AcpiEvCmosRegionSetup (
485 ACPI_HANDLE Handle,
486 UINT32 Function,
487 void *HandlerContext,
488 void **RegionContext)
489 {
490 ACPI_FUNCTION_TRACE (EvCmosRegionSetup);
491
492
493 return_ACPI_STATUS (AE_OK);
494 }
495
496
497 /*******************************************************************************
498 *
499 * FUNCTION: AcpiEvDefaultRegionSetup
500 *
501 * PARAMETERS: Handle - Region we are interested in
502 * Function - Start or stop
503 * HandlerContext - Address space handler context
504 * RegionContext - Region specific context
505 *
506 * RETURN: Status
507 *
508 * DESCRIPTION: Default region initialization
509 *
510 ******************************************************************************/
511
512 ACPI_STATUS
AcpiEvDefaultRegionSetup(ACPI_HANDLE Handle,UINT32 Function,void * HandlerContext,void ** RegionContext)513 AcpiEvDefaultRegionSetup (
514 ACPI_HANDLE Handle,
515 UINT32 Function,
516 void *HandlerContext,
517 void **RegionContext)
518 {
519 ACPI_FUNCTION_TRACE (EvDefaultRegionSetup);
520
521
522 if (Function == ACPI_REGION_DEACTIVATE)
523 {
524 *RegionContext = NULL;
525 }
526 else
527 {
528 *RegionContext = HandlerContext;
529 }
530
531 return_ACPI_STATUS (AE_OK);
532 }
533
534
535 /*******************************************************************************
536 *
537 * FUNCTION: AcpiEvInitializeRegion
538 *
539 * PARAMETERS: RegionObj - Region we are initializing
540 * AcpiNsLocked - Is namespace locked?
541 *
542 * RETURN: Status
543 *
544 * DESCRIPTION: Initializes the region, finds any _REG methods and saves them
545 * for execution at a later time
546 *
547 * Get the appropriate address space handler for a newly
548 * created region.
549 *
550 * This also performs address space specific initialization. For
551 * example, PCI regions must have an _ADR object that contains
552 * a PCI address in the scope of the definition. This address is
553 * required to perform an access to PCI config space.
554 *
555 * MUTEX: Interpreter should be unlocked, because we may run the _REG
556 * method for this region.
557 *
558 ******************************************************************************/
559
560 ACPI_STATUS
AcpiEvInitializeRegion(ACPI_OPERAND_OBJECT * RegionObj,BOOLEAN AcpiNsLocked)561 AcpiEvInitializeRegion (
562 ACPI_OPERAND_OBJECT *RegionObj,
563 BOOLEAN AcpiNsLocked)
564 {
565 ACPI_OPERAND_OBJECT *HandlerObj;
566 ACPI_OPERAND_OBJECT *ObjDesc;
567 ACPI_ADR_SPACE_TYPE SpaceId;
568 ACPI_NAMESPACE_NODE *Node;
569 ACPI_STATUS Status;
570
571
572 ACPI_FUNCTION_TRACE_U32 (EvInitializeRegion, AcpiNsLocked);
573
574
575 if (!RegionObj)
576 {
577 return_ACPI_STATUS (AE_BAD_PARAMETER);
578 }
579
580 if (RegionObj->Common.Flags & AOPOBJ_OBJECT_INITIALIZED)
581 {
582 return_ACPI_STATUS (AE_OK);
583 }
584
585 RegionObj->Common.Flags |= AOPOBJ_OBJECT_INITIALIZED;
586
587 Node = RegionObj->Region.Node->Parent;
588 SpaceId = RegionObj->Region.SpaceId;
589
590 /*
591 * The following loop depends upon the root Node having no parent
592 * ie: AcpiGbl_RootNode->Parent being set to NULL
593 */
594 while (Node)
595 {
596 /* Check to see if a handler exists */
597
598 HandlerObj = NULL;
599 ObjDesc = AcpiNsGetAttachedObject (Node);
600 if (ObjDesc)
601 {
602 /* Can only be a handler if the object exists */
603
604 switch (Node->Type)
605 {
606 case ACPI_TYPE_DEVICE:
607 case ACPI_TYPE_PROCESSOR:
608 case ACPI_TYPE_THERMAL:
609
610 HandlerObj = ObjDesc->CommonNotify.Handler;
611 break;
612
613 case ACPI_TYPE_METHOD:
614 /*
615 * If we are executing module level code, the original
616 * Node's object was replaced by this Method object and we
617 * saved the handler in the method object.
618 *
619 * See AcpiNsExecModuleCode
620 */
621 if (ObjDesc->Method.InfoFlags & ACPI_METHOD_MODULE_LEVEL)
622 {
623 HandlerObj = ObjDesc->Method.Dispatch.Handler;
624 }
625 break;
626
627 default:
628
629 /* Ignore other objects */
630
631 break;
632 }
633
634 HandlerObj = AcpiEvFindRegionHandler (SpaceId, HandlerObj);
635 if (HandlerObj)
636 {
637 /* Found correct handler */
638
639 ACPI_DEBUG_PRINT ((ACPI_DB_OPREGION,
640 "Found handler %p for region %p in obj %p\n",
641 HandlerObj, RegionObj, ObjDesc));
642
643 Status = AcpiEvAttachRegion (HandlerObj, RegionObj,
644 AcpiNsLocked);
645
646 /*
647 * Tell all users that this region is usable by
648 * running the _REG method
649 */
650 if (AcpiNsLocked)
651 {
652 Status = AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE);
653 if (ACPI_FAILURE (Status))
654 {
655 return_ACPI_STATUS (Status);
656 }
657 }
658
659 Status = AcpiEvExecuteRegMethod (RegionObj, ACPI_REG_CONNECT);
660
661 if (AcpiNsLocked)
662 {
663 Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE);
664 if (ACPI_FAILURE (Status))
665 {
666 return_ACPI_STATUS (Status);
667 }
668 }
669
670 return_ACPI_STATUS (AE_OK);
671 }
672 }
673
674 /* This node does not have the handler we need; Pop up one level */
675
676 Node = Node->Parent;
677 }
678
679 /* If we get here, there is no handler for this region */
680
681 ACPI_DEBUG_PRINT ((ACPI_DB_OPREGION,
682 "No handler for RegionType %s(%X) (RegionObj %p)\n",
683 AcpiUtGetRegionName (SpaceId), SpaceId, RegionObj));
684
685 return_ACPI_STATUS (AE_NOT_EXIST);
686 }
687