1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Qualcomm PM8xxx PMIC XOADC driver
4 *
5 * These ADCs are known as HK/XO (house keeping / chrystal oscillator)
6 * "XO" in "XOADC" means Chrystal Oscillator. It's a bunch of
7 * specific-purpose and general purpose ADC converters and channels.
8 *
9 * Copyright (C) 2017 Linaro Ltd.
10 * Author: Linus Walleij <linus.walleij@linaro.org>
11 */
12
13 #include <linux/iio/adc/qcom-vadc-common.h>
14 #include <linux/iio/iio.h>
15 #include <linux/iio/sysfs.h>
16 #include <linux/module.h>
17 #include <linux/mod_devicetable.h>
18 #include <linux/platform_device.h>
19 #include <linux/property.h>
20 #include <linux/regmap.h>
21 #include <linux/init.h>
22 #include <linux/interrupt.h>
23 #include <linux/regulator/consumer.h>
24
25 /*
26 * Definitions for the "user processor" registers lifted from the v3.4
27 * Qualcomm tree. Their kernel has two out-of-tree drivers for the ADC:
28 * drivers/misc/pmic8058-xoadc.c
29 * drivers/hwmon/pm8xxx-adc.c
30 * None of them contain any complete register specification, so this is
31 * a best effort of combining the information.
32 */
33
34 /* These appear to be "battery monitor" registers */
35 #define ADC_ARB_BTM_CNTRL1 0x17e
36 #define ADC_ARB_BTM_CNTRL1_EN_BTM BIT(0)
37 #define ADC_ARB_BTM_CNTRL1_SEL_OP_MODE BIT(1)
38 #define ADC_ARB_BTM_CNTRL1_MEAS_INTERVAL1 BIT(2)
39 #define ADC_ARB_BTM_CNTRL1_MEAS_INTERVAL2 BIT(3)
40 #define ADC_ARB_BTM_CNTRL1_MEAS_INTERVAL3 BIT(4)
41 #define ADC_ARB_BTM_CNTRL1_MEAS_INTERVAL4 BIT(5)
42 #define ADC_ARB_BTM_CNTRL1_EOC BIT(6)
43 #define ADC_ARB_BTM_CNTRL1_REQ BIT(7)
44
45 #define ADC_ARB_BTM_AMUX_CNTRL 0x17f
46 #define ADC_ARB_BTM_ANA_PARAM 0x180
47 #define ADC_ARB_BTM_DIG_PARAM 0x181
48 #define ADC_ARB_BTM_RSV 0x182
49 #define ADC_ARB_BTM_DATA1 0x183
50 #define ADC_ARB_BTM_DATA0 0x184
51 #define ADC_ARB_BTM_BAT_COOL_THR1 0x185
52 #define ADC_ARB_BTM_BAT_COOL_THR0 0x186
53 #define ADC_ARB_BTM_BAT_WARM_THR1 0x187
54 #define ADC_ARB_BTM_BAT_WARM_THR0 0x188
55 #define ADC_ARB_BTM_CNTRL2 0x18c
56
57 /* Proper ADC registers */
58
59 #define ADC_ARB_USRP_CNTRL 0x197
60 #define ADC_ARB_USRP_CNTRL_EN_ARB BIT(0)
61 #define ADC_ARB_USRP_CNTRL_RSV1 BIT(1)
62 #define ADC_ARB_USRP_CNTRL_RSV2 BIT(2)
63 #define ADC_ARB_USRP_CNTRL_RSV3 BIT(3)
64 #define ADC_ARB_USRP_CNTRL_RSV4 BIT(4)
65 #define ADC_ARB_USRP_CNTRL_RSV5 BIT(5)
66 #define ADC_ARB_USRP_CNTRL_EOC BIT(6)
67 #define ADC_ARB_USRP_CNTRL_REQ BIT(7)
68
69 #define ADC_ARB_USRP_AMUX_CNTRL 0x198
70 /*
71 * The channel mask includes the bits selecting channel mux and prescaler
72 * on PM8058, or channel mux and premux on PM8921.
73 */
74 #define ADC_ARB_USRP_AMUX_CNTRL_CHAN_MASK 0xfc
75 #define ADC_ARB_USRP_AMUX_CNTRL_RSV0 BIT(0)
76 #define ADC_ARB_USRP_AMUX_CNTRL_RSV1 BIT(1)
77 /* On PM8058 this is prescaling, on PM8921 this is premux */
78 #define ADC_ARB_USRP_AMUX_CNTRL_PRESCALEMUX0 BIT(2)
79 #define ADC_ARB_USRP_AMUX_CNTRL_PRESCALEMUX1 BIT(3)
80 #define ADC_ARB_USRP_AMUX_CNTRL_SEL0 BIT(4)
81 #define ADC_ARB_USRP_AMUX_CNTRL_SEL1 BIT(5)
82 #define ADC_ARB_USRP_AMUX_CNTRL_SEL2 BIT(6)
83 #define ADC_ARB_USRP_AMUX_CNTRL_SEL3 BIT(7)
84 #define ADC_AMUX_PREMUX_SHIFT 2
85 #define ADC_AMUX_SEL_SHIFT 4
86
87 /* We know very little about the bits in this register */
88 #define ADC_ARB_USRP_ANA_PARAM 0x199
89 #define ADC_ARB_USRP_ANA_PARAM_DIS 0xFE
90 #define ADC_ARB_USRP_ANA_PARAM_EN 0xFF
91
92 #define ADC_ARB_USRP_DIG_PARAM 0x19A
93 #define ADC_ARB_USRP_DIG_PARAM_SEL_SHIFT0 BIT(0)
94 #define ADC_ARB_USRP_DIG_PARAM_SEL_SHIFT1 BIT(1)
95 #define ADC_ARB_USRP_DIG_PARAM_CLK_RATE0 BIT(2)
96 #define ADC_ARB_USRP_DIG_PARAM_CLK_RATE1 BIT(3)
97 #define ADC_ARB_USRP_DIG_PARAM_EOC BIT(4)
98 /*
99 * On a later ADC the decimation factors are defined as
100 * 00 = 512, 01 = 1024, 10 = 2048, 11 = 4096 so assume this
101 * holds also for this older XOADC.
102 */
103 #define ADC_ARB_USRP_DIG_PARAM_DEC_RATE0 BIT(5)
104 #define ADC_ARB_USRP_DIG_PARAM_DEC_RATE1 BIT(6)
105 #define ADC_ARB_USRP_DIG_PARAM_EN BIT(7)
106 #define ADC_DIG_PARAM_DEC_SHIFT 5
107
108 #define ADC_ARB_USRP_RSV 0x19B
109 #define ADC_ARB_USRP_RSV_RST BIT(0)
110 #define ADC_ARB_USRP_RSV_DTEST0 BIT(1)
111 #define ADC_ARB_USRP_RSV_DTEST1 BIT(2)
112 #define ADC_ARB_USRP_RSV_OP BIT(3)
113 #define ADC_ARB_USRP_RSV_IP_SEL0 BIT(4)
114 #define ADC_ARB_USRP_RSV_IP_SEL1 BIT(5)
115 #define ADC_ARB_USRP_RSV_IP_SEL2 BIT(6)
116 #define ADC_ARB_USRP_RSV_TRM BIT(7)
117 #define ADC_RSV_IP_SEL_SHIFT 4
118
119 #define ADC_ARB_USRP_DATA0 0x19D
120 #define ADC_ARB_USRP_DATA1 0x19C
121
122 /*
123 * Physical channels which MUST exist on all PM variants in order to provide
124 * proper reference points for calibration.
125 *
126 * @PM8XXX_CHANNEL_INTERNAL: 625mV reference channel
127 * @PM8XXX_CHANNEL_125V: 1250mV reference channel
128 * @PM8XXX_CHANNEL_INTERNAL_2: 325mV reference channel
129 * @PM8XXX_CHANNEL_MUXOFF: channel to reduce input load on mux, apparently also
130 * measures XO temperature
131 */
132 #define PM8XXX_CHANNEL_INTERNAL 0x0c
133 #define PM8XXX_CHANNEL_125V 0x0d
134 #define PM8XXX_CHANNEL_INTERNAL_2 0x0e
135 #define PM8XXX_CHANNEL_MUXOFF 0x0f
136
137 /*
138 * PM8058 AMUX premux scaling, two bits. This is done of the channel before
139 * reaching the AMUX.
140 */
141 #define PM8058_AMUX_PRESCALE_0 0x0 /* No scaling on the signal */
142 #define PM8058_AMUX_PRESCALE_1 0x1 /* Unity scaling selected by the user */
143 #define PM8058_AMUX_PRESCALE_1_DIV3 0x2 /* 1/3 prescaler on the input */
144
145 /* Defines reference voltage for the XOADC */
146 #define AMUX_RSV0 0x0 /* XO_IN/XOADC_GND, special selection to read XO temp */
147 #define AMUX_RSV1 0x1 /* PMIC_IN/XOADC_GND */
148 #define AMUX_RSV2 0x2 /* PMIC_IN/BMS_CSP */
149 #define AMUX_RSV3 0x3 /* not used */
150 #define AMUX_RSV4 0x4 /* XOADC_GND/XOADC_GND */
151 #define AMUX_RSV5 0x5 /* XOADC_VREF/XOADC_GND */
152 #define XOADC_RSV_MAX 5 /* 3 bits 0..7, 3 and 6,7 are invalid */
153
154 /**
155 * struct xoadc_channel - encodes channel properties and defaults
156 * @datasheet_name: the hardwarename of this channel
157 * @pre_scale_mux: prescale (PM8058) or premux (PM8921) for selecting
158 * this channel. Both this and the amux channel is needed to uniquely
159 * identify a channel. Values 0..3.
160 * @amux_channel: value of the ADC_ARB_USRP_AMUX_CNTRL register for this
161 * channel, bits 4..7, selects the amux, values 0..f
162 * @prescale: the channels have hard-coded prescale ratios defined
163 * by the hardware, this tells us what it is
164 * @type: corresponding IIO channel type, usually IIO_VOLTAGE or
165 * IIO_TEMP
166 * @scale_fn_type: the liner interpolation etc to convert the
167 * ADC code to the value that IIO expects, in uV or millicelsius
168 * etc. This scale function can be pretty elaborate if different
169 * thermistors are connected or other hardware characteristics are
170 * deployed.
171 * @amux_ip_rsv: ratiometric scale value used by the analog muxer: this
172 * selects the reference voltage for ratiometric scaling
173 */
174 struct xoadc_channel {
175 const char *datasheet_name;
176 u8 pre_scale_mux:2;
177 u8 amux_channel:4;
178 const struct u32_fract prescale;
179 enum iio_chan_type type;
180 enum vadc_scale_fn_type scale_fn_type;
181 u8 amux_ip_rsv:3;
182 };
183
184 /**
185 * struct xoadc_variant - encodes the XOADC variant characteristics
186 * @name: name of this PMIC variant
187 * @channels: the hardware channels and respective settings and defaults
188 * @broken_ratiometric: if the PMIC has broken ratiometric scaling (this
189 * is a known problem on PM8058)
190 * @prescaling: this variant uses AMUX bits 2 & 3 for prescaling (PM8058)
191 * @second_level_mux: this variant uses AMUX bits 2 & 3 for a second level
192 * mux
193 */
194 struct xoadc_variant {
195 const char name[16];
196 const struct xoadc_channel *channels;
197 bool broken_ratiometric;
198 bool prescaling;
199 bool second_level_mux;
200 };
201
202 /*
203 * XOADC_CHAN macro parameters:
204 * _dname: the name of the channel
205 * _presmux: prescaler (PM8058) or premux (PM8921) setting for this channel
206 * _amux: the value in bits 2..7 of the ADC_ARB_USRP_AMUX_CNTRL register
207 * for this channel. On some PMICs some of the bits select a prescaler, and
208 * on some PMICs some of the bits select various complex multiplex settings.
209 * _type: IIO channel type
210 * _prenum: prescaler numerator (dividend)
211 * _preden: prescaler denominator (divisor)
212 * _scale: scaling function type, this selects how the raw valued is mangled
213 * to output the actual processed measurement
214 * _amip: analog mux input parent when using ratiometric measurements
215 */
216 #define XOADC_CHAN(_dname, _presmux, _amux, _type, _prenum, _preden, _scale, _amip) \
217 { \
218 .datasheet_name = __stringify(_dname), \
219 .pre_scale_mux = _presmux, \
220 .amux_channel = _amux, \
221 .prescale = { \
222 .numerator = _prenum, .denominator = _preden, \
223 }, \
224 .type = _type, \
225 .scale_fn_type = _scale, \
226 .amux_ip_rsv = _amip, \
227 }
228
229 /*
230 * Taken from arch/arm/mach-msm/board-9615.c in the vendor tree:
231 * TODO: incomplete, needs testing.
232 */
233 static const struct xoadc_channel pm8018_xoadc_channels[] = {
234 XOADC_CHAN(VCOIN, 0x00, 0x00, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
235 XOADC_CHAN(VBAT, 0x00, 0x01, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
236 XOADC_CHAN(VPH_PWR, 0x00, 0x02, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
237 XOADC_CHAN(DIE_TEMP, 0x00, 0x0b, IIO_TEMP, 1, 1, SCALE_PMIC_THERM, AMUX_RSV1),
238 /* Used for battery ID or battery temperature */
239 XOADC_CHAN(AMUX8, 0x00, 0x08, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV2),
240 XOADC_CHAN(INTERNAL, 0x00, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
241 XOADC_CHAN(125V, 0x00, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
242 XOADC_CHAN(MUXOFF, 0x00, 0x0f, IIO_TEMP, 1, 1, SCALE_XOTHERM, AMUX_RSV0),
243 { }, /* Sentinel */
244 };
245
246 /*
247 * Taken from arch/arm/mach-msm/board-8930-pmic.c in the vendor tree:
248 * TODO: needs testing.
249 */
250 static const struct xoadc_channel pm8038_xoadc_channels[] = {
251 XOADC_CHAN(VCOIN, 0x00, 0x00, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
252 XOADC_CHAN(VBAT, 0x00, 0x01, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
253 XOADC_CHAN(DCIN, 0x00, 0x02, IIO_VOLTAGE, 1, 6, SCALE_DEFAULT, AMUX_RSV1),
254 XOADC_CHAN(ICHG, 0x00, 0x03, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
255 XOADC_CHAN(VPH_PWR, 0x00, 0x04, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
256 XOADC_CHAN(AMUX5, 0x00, 0x05, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
257 XOADC_CHAN(AMUX6, 0x00, 0x06, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
258 XOADC_CHAN(AMUX7, 0x00, 0x07, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
259 /* AMUX8 used for battery temperature in most cases */
260 XOADC_CHAN(AMUX8, 0x00, 0x08, IIO_TEMP, 1, 1, SCALE_THERM_100K_PULLUP, AMUX_RSV2),
261 XOADC_CHAN(AMUX9, 0x00, 0x09, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
262 XOADC_CHAN(USB_VBUS, 0x00, 0x0a, IIO_VOLTAGE, 1, 4, SCALE_DEFAULT, AMUX_RSV1),
263 XOADC_CHAN(DIE_TEMP, 0x00, 0x0b, IIO_TEMP, 1, 1, SCALE_PMIC_THERM, AMUX_RSV1),
264 XOADC_CHAN(INTERNAL, 0x00, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
265 XOADC_CHAN(125V, 0x00, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
266 XOADC_CHAN(INTERNAL_2, 0x00, 0x0e, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
267 XOADC_CHAN(MUXOFF, 0x00, 0x0f, IIO_TEMP, 1, 1, SCALE_XOTHERM, AMUX_RSV0),
268 { }, /* Sentinel */
269 };
270
271 /*
272 * This was created by cross-referencing the vendor tree
273 * arch/arm/mach-msm/board-msm8x60.c msm_adc_channels_data[]
274 * with the "channel types" (first field) to find the right
275 * configuration for these channels on an MSM8x60 i.e. PM8058
276 * setup.
277 */
278 static const struct xoadc_channel pm8058_xoadc_channels[] = {
279 XOADC_CHAN(VCOIN, 0x00, 0x00, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1),
280 XOADC_CHAN(VBAT, 0x00, 0x01, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
281 XOADC_CHAN(DCIN, 0x00, 0x02, IIO_VOLTAGE, 1, 10, SCALE_DEFAULT, AMUX_RSV1),
282 XOADC_CHAN(ICHG, 0x00, 0x03, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
283 XOADC_CHAN(VPH_PWR, 0x00, 0x04, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
284 /*
285 * AMUX channels 5 thru 9 are referred to as MPP5 thru MPP9 in
286 * some code and documentation. But they are really just 5
287 * channels just like any other. They are connected to a switching
288 * matrix where they can be routed to any of the MPPs, not just
289 * 1-to-1 onto MPP5 thru 9, so naming them MPP5 thru MPP9 is
290 * very confusing.
291 */
292 XOADC_CHAN(AMUX5, 0x00, 0x05, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
293 XOADC_CHAN(AMUX6, 0x00, 0x06, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
294 XOADC_CHAN(AMUX7, 0x00, 0x07, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1),
295 XOADC_CHAN(AMUX8, 0x00, 0x08, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1),
296 XOADC_CHAN(AMUX9, 0x00, 0x09, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
297 XOADC_CHAN(USB_VBUS, 0x00, 0x0a, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
298 XOADC_CHAN(DIE_TEMP, 0x00, 0x0b, IIO_TEMP, 1, 1, SCALE_PMIC_THERM, AMUX_RSV1),
299 XOADC_CHAN(INTERNAL, 0x00, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
300 XOADC_CHAN(125V, 0x00, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
301 XOADC_CHAN(INTERNAL_2, 0x00, 0x0e, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
302 XOADC_CHAN(MUXOFF, 0x00, 0x0f, IIO_TEMP, 1, 1, SCALE_XOTHERM, AMUX_RSV0),
303 /* There are also "unity" and divided by 3 channels (prescaler) but noone is using them */
304 { }, /* Sentinel */
305 };
306
307 /*
308 * The PM8921 has some pre-muxing on its channels, this comes from the vendor tree
309 * include/linux/mfd/pm8xxx/pm8xxx-adc.h
310 * board-flo-pmic.c (Nexus 7) and board-8064-pmic.c
311 */
312 static const struct xoadc_channel pm8921_xoadc_channels[] = {
313 XOADC_CHAN(VCOIN, 0x00, 0x00, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
314 XOADC_CHAN(VBAT, 0x00, 0x01, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
315 XOADC_CHAN(DCIN, 0x00, 0x02, IIO_VOLTAGE, 1, 6, SCALE_DEFAULT, AMUX_RSV1),
316 /* channel "ICHG" is reserved and not used on PM8921 */
317 XOADC_CHAN(VPH_PWR, 0x00, 0x04, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
318 XOADC_CHAN(IBAT, 0x00, 0x05, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
319 /* CHAN 6 & 7 (MPP1 & MPP2) are reserved for MPP channels on PM8921 */
320 XOADC_CHAN(BATT_THERM, 0x00, 0x08, IIO_TEMP, 1, 1, SCALE_THERM_100K_PULLUP, AMUX_RSV1),
321 XOADC_CHAN(BATT_ID, 0x00, 0x09, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
322 XOADC_CHAN(USB_VBUS, 0x00, 0x0a, IIO_VOLTAGE, 1, 4, SCALE_DEFAULT, AMUX_RSV1),
323 XOADC_CHAN(DIE_TEMP, 0x00, 0x0b, IIO_TEMP, 1, 1, SCALE_PMIC_THERM, AMUX_RSV1),
324 XOADC_CHAN(INTERNAL, 0x00, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
325 XOADC_CHAN(125V, 0x00, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
326 /* FIXME: look into the scaling of this temperature */
327 XOADC_CHAN(CHG_TEMP, 0x00, 0x0e, IIO_TEMP, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
328 XOADC_CHAN(MUXOFF, 0x00, 0x0f, IIO_TEMP, 1, 1, SCALE_XOTHERM, AMUX_RSV0),
329 /* The following channels have premux bit 0 set to 1 (all end in 4) */
330 XOADC_CHAN(ATEST_8, 0x01, 0x00, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
331 /* Set scaling to 1/2 based on the name for these two */
332 XOADC_CHAN(USB_SNS_DIV20, 0x01, 0x01, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1),
333 XOADC_CHAN(DCIN_SNS_DIV20, 0x01, 0x02, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1),
334 XOADC_CHAN(AMUX3, 0x01, 0x03, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
335 XOADC_CHAN(AMUX4, 0x01, 0x04, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
336 XOADC_CHAN(AMUX5, 0x01, 0x05, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
337 XOADC_CHAN(AMUX6, 0x01, 0x06, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
338 XOADC_CHAN(AMUX7, 0x01, 0x07, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
339 XOADC_CHAN(AMUX8, 0x01, 0x08, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
340 /* Internal test signals, I think */
341 XOADC_CHAN(ATEST_1, 0x01, 0x09, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
342 XOADC_CHAN(ATEST_2, 0x01, 0x0a, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
343 XOADC_CHAN(ATEST_3, 0x01, 0x0b, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
344 XOADC_CHAN(ATEST_4, 0x01, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
345 XOADC_CHAN(ATEST_5, 0x01, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
346 XOADC_CHAN(ATEST_6, 0x01, 0x0e, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
347 XOADC_CHAN(ATEST_7, 0x01, 0x0f, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
348 /* The following channels have premux bit 1 set to 1 (all end in 8) */
349 /* I guess even ATEST8 will be divided by 3 here */
350 XOADC_CHAN(ATEST_8, 0x02, 0x00, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
351 /* I guess div 2 div 3 becomes div 6 */
352 XOADC_CHAN(USB_SNS_DIV20_DIV3, 0x02, 0x01, IIO_VOLTAGE, 1, 6, SCALE_DEFAULT, AMUX_RSV1),
353 XOADC_CHAN(DCIN_SNS_DIV20_DIV3, 0x02, 0x02, IIO_VOLTAGE, 1, 6, SCALE_DEFAULT, AMUX_RSV1),
354 XOADC_CHAN(AMUX3_DIV3, 0x02, 0x03, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
355 XOADC_CHAN(AMUX4_DIV3, 0x02, 0x04, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
356 XOADC_CHAN(AMUX5_DIV3, 0x02, 0x05, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
357 XOADC_CHAN(AMUX6_DIV3, 0x02, 0x06, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
358 XOADC_CHAN(AMUX7_DIV3, 0x02, 0x07, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
359 XOADC_CHAN(AMUX8_DIV3, 0x02, 0x08, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
360 XOADC_CHAN(ATEST_1_DIV3, 0x02, 0x09, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
361 XOADC_CHAN(ATEST_2_DIV3, 0x02, 0x0a, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
362 XOADC_CHAN(ATEST_3_DIV3, 0x02, 0x0b, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
363 XOADC_CHAN(ATEST_4_DIV3, 0x02, 0x0c, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
364 XOADC_CHAN(ATEST_5_DIV3, 0x02, 0x0d, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
365 XOADC_CHAN(ATEST_6_DIV3, 0x02, 0x0e, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
366 XOADC_CHAN(ATEST_7_DIV3, 0x02, 0x0f, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
367 { }, /* Sentinel */
368 };
369
370 /**
371 * struct pm8xxx_chan_info - ADC channel information
372 * @name: name of this channel
373 * @hwchan: pointer to hardware channel information (muxing & scaling settings)
374 * @calibration: whether to use absolute or ratiometric calibration
375 * @decimation: 0,1,2,3
376 * @amux_ip_rsv: ratiometric scale value if using ratiometric
377 * calibration: 0, 1, 2, 4, 5.
378 */
379 struct pm8xxx_chan_info {
380 const char *name;
381 const struct xoadc_channel *hwchan;
382 enum vadc_calibration calibration;
383 u8 decimation:2;
384 u8 amux_ip_rsv:3;
385 };
386
387 /**
388 * struct pm8xxx_xoadc - state container for the XOADC
389 * @dev: pointer to device
390 * @map: regmap to access registers
391 * @variant: XOADC variant characteristics
392 * @vref: reference voltage regulator
393 * characteristics of the channels, and sensible default settings
394 * @nchans: number of channels, configured by the device tree
395 * @chans: the channel information per-channel, configured by the device tree
396 * @iio_chans: IIO channel specifiers
397 * @graph: linear calibration parameters for absolute and
398 * ratiometric measurements
399 * @complete: completion to indicate end of conversion
400 * @lock: lock to restrict access to the hardware to one client at the time
401 */
402 struct pm8xxx_xoadc {
403 struct device *dev;
404 struct regmap *map;
405 const struct xoadc_variant *variant;
406 struct regulator *vref;
407 unsigned int nchans;
408 struct pm8xxx_chan_info *chans;
409 struct iio_chan_spec *iio_chans;
410 struct vadc_linear_graph graph[2];
411 struct completion complete;
412 struct mutex lock;
413 };
414
pm8xxx_eoc_irq(int irq,void * d)415 static irqreturn_t pm8xxx_eoc_irq(int irq, void *d)
416 {
417 struct iio_dev *indio_dev = d;
418 struct pm8xxx_xoadc *adc = iio_priv(indio_dev);
419
420 complete(&adc->complete);
421
422 return IRQ_HANDLED;
423 }
424
425 static struct pm8xxx_chan_info *
pm8xxx_get_channel(struct pm8xxx_xoadc * adc,u8 chan)426 pm8xxx_get_channel(struct pm8xxx_xoadc *adc, u8 chan)
427 {
428 int i;
429
430 for (i = 0; i < adc->nchans; i++) {
431 struct pm8xxx_chan_info *ch = &adc->chans[i];
432 if (ch->hwchan->amux_channel == chan)
433 return ch;
434 }
435 return NULL;
436 }
437
pm8xxx_read_channel_rsv(struct pm8xxx_xoadc * adc,const struct pm8xxx_chan_info * ch,u8 rsv,u16 * adc_code,bool force_ratiometric)438 static int pm8xxx_read_channel_rsv(struct pm8xxx_xoadc *adc,
439 const struct pm8xxx_chan_info *ch,
440 u8 rsv, u16 *adc_code,
441 bool force_ratiometric)
442 {
443 int ret;
444 unsigned int val;
445 u8 rsvmask, rsvval;
446 u8 lsb, msb;
447
448 dev_dbg(adc->dev, "read channel \"%s\", amux %d, prescale/mux: %d, rsv %d\n",
449 ch->name, ch->hwchan->amux_channel, ch->hwchan->pre_scale_mux, rsv);
450
451 mutex_lock(&adc->lock);
452
453 /* Mux in this channel */
454 val = ch->hwchan->amux_channel << ADC_AMUX_SEL_SHIFT;
455 val |= ch->hwchan->pre_scale_mux << ADC_AMUX_PREMUX_SHIFT;
456 ret = regmap_write(adc->map, ADC_ARB_USRP_AMUX_CNTRL, val);
457 if (ret)
458 goto unlock;
459
460 /* Set up ratiometric scale value, mask off all bits except these */
461 rsvmask = (ADC_ARB_USRP_RSV_RST | ADC_ARB_USRP_RSV_DTEST0 |
462 ADC_ARB_USRP_RSV_DTEST1 | ADC_ARB_USRP_RSV_OP);
463 if (adc->variant->broken_ratiometric && !force_ratiometric) {
464 /*
465 * Apparently the PM8058 has some kind of bug which is
466 * reflected in the vendor tree drivers/misc/pmix8058-xoadc.c
467 * which just hardcodes the RSV selector to SEL1 (0x20) for
468 * most cases and SEL0 (0x10) for the MUXOFF channel only.
469 * If we force ratiometric (currently only done when attempting
470 * to do ratiometric calibration) this doesn't seem to work
471 * very well and I suspect ratiometric conversion is simply
472 * broken or not supported on the PM8058.
473 *
474 * Maybe IO_SEL2 doesn't exist on PM8058 and bits 4 & 5 select
475 * the mode alone.
476 *
477 * Some PM8058 register documentation would be nice to get
478 * this right.
479 */
480 if (ch->hwchan->amux_channel == PM8XXX_CHANNEL_MUXOFF)
481 rsvval = ADC_ARB_USRP_RSV_IP_SEL0;
482 else
483 rsvval = ADC_ARB_USRP_RSV_IP_SEL1;
484 } else {
485 if (rsv == 0xff)
486 rsvval = (ch->amux_ip_rsv << ADC_RSV_IP_SEL_SHIFT) |
487 ADC_ARB_USRP_RSV_TRM;
488 else
489 rsvval = (rsv << ADC_RSV_IP_SEL_SHIFT) |
490 ADC_ARB_USRP_RSV_TRM;
491 }
492
493 ret = regmap_update_bits(adc->map,
494 ADC_ARB_USRP_RSV,
495 ~rsvmask,
496 rsvval);
497 if (ret)
498 goto unlock;
499
500 ret = regmap_write(adc->map, ADC_ARB_USRP_ANA_PARAM,
501 ADC_ARB_USRP_ANA_PARAM_DIS);
502 if (ret)
503 goto unlock;
504
505 /* Decimation factor */
506 ret = regmap_write(adc->map, ADC_ARB_USRP_DIG_PARAM,
507 ADC_ARB_USRP_DIG_PARAM_SEL_SHIFT0 |
508 ADC_ARB_USRP_DIG_PARAM_SEL_SHIFT1 |
509 ch->decimation << ADC_DIG_PARAM_DEC_SHIFT);
510 if (ret)
511 goto unlock;
512
513 ret = regmap_write(adc->map, ADC_ARB_USRP_ANA_PARAM,
514 ADC_ARB_USRP_ANA_PARAM_EN);
515 if (ret)
516 goto unlock;
517
518 /* Enable the arbiter, the Qualcomm code does it twice like this */
519 ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL,
520 ADC_ARB_USRP_CNTRL_EN_ARB);
521 if (ret)
522 goto unlock;
523 ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL,
524 ADC_ARB_USRP_CNTRL_EN_ARB);
525 if (ret)
526 goto unlock;
527
528
529 /* Fire a request! */
530 reinit_completion(&adc->complete);
531 ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL,
532 ADC_ARB_USRP_CNTRL_EN_ARB |
533 ADC_ARB_USRP_CNTRL_REQ);
534 if (ret)
535 goto unlock;
536
537 /* Next the interrupt occurs */
538 ret = wait_for_completion_timeout(&adc->complete,
539 VADC_CONV_TIME_MAX_US);
540 if (!ret) {
541 dev_err(adc->dev, "conversion timed out\n");
542 ret = -ETIMEDOUT;
543 goto unlock;
544 }
545
546 ret = regmap_read(adc->map, ADC_ARB_USRP_DATA0, &val);
547 if (ret)
548 goto unlock;
549 lsb = val;
550 ret = regmap_read(adc->map, ADC_ARB_USRP_DATA1, &val);
551 if (ret)
552 goto unlock;
553 msb = val;
554 *adc_code = (msb << 8) | lsb;
555
556 /* Turn off the ADC by setting the arbiter to 0 twice */
557 ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL, 0);
558 if (ret)
559 goto unlock;
560 ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL, 0);
561 if (ret)
562 goto unlock;
563
564 unlock:
565 mutex_unlock(&adc->lock);
566 return ret;
567 }
568
pm8xxx_read_channel(struct pm8xxx_xoadc * adc,const struct pm8xxx_chan_info * ch,u16 * adc_code)569 static int pm8xxx_read_channel(struct pm8xxx_xoadc *adc,
570 const struct pm8xxx_chan_info *ch,
571 u16 *adc_code)
572 {
573 /*
574 * Normally we just use the ratiometric scale value (RSV) predefined
575 * for the channel, but during calibration we need to modify this
576 * so this wrapper is a helper hiding the more complex version.
577 */
578 return pm8xxx_read_channel_rsv(adc, ch, 0xff, adc_code, false);
579 }
580
pm8xxx_calibrate_device(struct pm8xxx_xoadc * adc)581 static int pm8xxx_calibrate_device(struct pm8xxx_xoadc *adc)
582 {
583 const struct pm8xxx_chan_info *ch;
584 u16 read_1250v;
585 u16 read_0625v;
586 u16 read_nomux_rsv5;
587 u16 read_nomux_rsv4;
588 int ret;
589
590 adc->graph[VADC_CALIB_ABSOLUTE].dx = VADC_ABSOLUTE_RANGE_UV;
591 adc->graph[VADC_CALIB_RATIOMETRIC].dx = VADC_RATIOMETRIC_RANGE;
592
593 /* Common reference channel calibration */
594 ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_125V);
595 if (!ch)
596 return -ENODEV;
597 ret = pm8xxx_read_channel(adc, ch, &read_1250v);
598 if (ret) {
599 dev_err(adc->dev, "could not read 1.25V reference channel\n");
600 return -ENODEV;
601 }
602 ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_INTERNAL);
603 if (!ch)
604 return -ENODEV;
605 ret = pm8xxx_read_channel(adc, ch, &read_0625v);
606 if (ret) {
607 dev_err(adc->dev, "could not read 0.625V reference channel\n");
608 return -ENODEV;
609 }
610 if (read_1250v == read_0625v) {
611 dev_err(adc->dev, "read same ADC code for 1.25V and 0.625V\n");
612 return -ENODEV;
613 }
614
615 adc->graph[VADC_CALIB_ABSOLUTE].dy = read_1250v - read_0625v;
616 adc->graph[VADC_CALIB_ABSOLUTE].gnd = read_0625v;
617
618 dev_info(adc->dev, "absolute calibration dx = %d uV, dy = %d units\n",
619 VADC_ABSOLUTE_RANGE_UV, adc->graph[VADC_CALIB_ABSOLUTE].dy);
620
621 /* Ratiometric calibration */
622 ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_MUXOFF);
623 if (!ch)
624 return -ENODEV;
625 ret = pm8xxx_read_channel_rsv(adc, ch, AMUX_RSV5,
626 &read_nomux_rsv5, true);
627 if (ret) {
628 dev_err(adc->dev, "could not read MUXOFF reference channel\n");
629 return -ENODEV;
630 }
631 ret = pm8xxx_read_channel_rsv(adc, ch, AMUX_RSV4,
632 &read_nomux_rsv4, true);
633 if (ret) {
634 dev_err(adc->dev, "could not read MUXOFF reference channel\n");
635 return -ENODEV;
636 }
637 adc->graph[VADC_CALIB_RATIOMETRIC].dy =
638 read_nomux_rsv5 - read_nomux_rsv4;
639 adc->graph[VADC_CALIB_RATIOMETRIC].gnd = read_nomux_rsv4;
640
641 dev_info(adc->dev, "ratiometric calibration dx = %d, dy = %d units\n",
642 VADC_RATIOMETRIC_RANGE,
643 adc->graph[VADC_CALIB_RATIOMETRIC].dy);
644
645 return 0;
646 }
647
pm8xxx_read_raw(struct iio_dev * indio_dev,struct iio_chan_spec const * chan,int * val,int * val2,long mask)648 static int pm8xxx_read_raw(struct iio_dev *indio_dev,
649 struct iio_chan_spec const *chan,
650 int *val, int *val2, long mask)
651 {
652 struct pm8xxx_xoadc *adc = iio_priv(indio_dev);
653 const struct pm8xxx_chan_info *ch;
654 u16 adc_code;
655 int ret;
656
657 switch (mask) {
658 case IIO_CHAN_INFO_PROCESSED:
659 ch = pm8xxx_get_channel(adc, chan->address);
660 if (!ch) {
661 dev_err(adc->dev, "no such channel %lu\n",
662 chan->address);
663 return -EINVAL;
664 }
665 ret = pm8xxx_read_channel(adc, ch, &adc_code);
666 if (ret)
667 return ret;
668
669 ret = qcom_vadc_scale(ch->hwchan->scale_fn_type,
670 &adc->graph[ch->calibration],
671 &ch->hwchan->prescale,
672 (ch->calibration == VADC_CALIB_ABSOLUTE),
673 adc_code, val);
674 if (ret)
675 return ret;
676
677 return IIO_VAL_INT;
678 case IIO_CHAN_INFO_RAW:
679 ch = pm8xxx_get_channel(adc, chan->address);
680 if (!ch) {
681 dev_err(adc->dev, "no such channel %lu\n",
682 chan->address);
683 return -EINVAL;
684 }
685 ret = pm8xxx_read_channel(adc, ch, &adc_code);
686 if (ret)
687 return ret;
688
689 *val = (int)adc_code;
690 return IIO_VAL_INT;
691 default:
692 return -EINVAL;
693 }
694 }
695
pm8xxx_fwnode_xlate(struct iio_dev * indio_dev,const struct fwnode_reference_args * iiospec)696 static int pm8xxx_fwnode_xlate(struct iio_dev *indio_dev,
697 const struct fwnode_reference_args *iiospec)
698 {
699 struct pm8xxx_xoadc *adc = iio_priv(indio_dev);
700 u8 pre_scale_mux;
701 u8 amux_channel;
702 unsigned int i;
703
704 /*
705 * First cell is prescaler or premux, second cell is analog
706 * mux.
707 */
708 if (iiospec->nargs != 2) {
709 dev_err(&indio_dev->dev, "wrong number of arguments for %pfwP need 2 got %d\n",
710 iiospec->fwnode,
711 iiospec->nargs);
712 return -EINVAL;
713 }
714 pre_scale_mux = (u8)iiospec->args[0];
715 amux_channel = (u8)iiospec->args[1];
716 dev_dbg(&indio_dev->dev, "pre scale/mux: %02x, amux: %02x\n",
717 pre_scale_mux, amux_channel);
718
719 /* We need to match exactly on the prescale/premux and channel */
720 for (i = 0; i < adc->nchans; i++)
721 if (adc->chans[i].hwchan->pre_scale_mux == pre_scale_mux &&
722 adc->chans[i].hwchan->amux_channel == amux_channel)
723 return i;
724
725 return -EINVAL;
726 }
727
728 static const struct iio_info pm8xxx_xoadc_info = {
729 .fwnode_xlate = pm8xxx_fwnode_xlate,
730 .read_raw = pm8xxx_read_raw,
731 };
732
pm8xxx_xoadc_parse_channel(struct device * dev,struct fwnode_handle * fwnode,const struct xoadc_channel * hw_channels,struct iio_chan_spec * iio_chan,struct pm8xxx_chan_info * ch)733 static int pm8xxx_xoadc_parse_channel(struct device *dev,
734 struct fwnode_handle *fwnode,
735 const struct xoadc_channel *hw_channels,
736 struct iio_chan_spec *iio_chan,
737 struct pm8xxx_chan_info *ch)
738 {
739 const char *name = fwnode_get_name(fwnode);
740 const struct xoadc_channel *hwchan;
741 u32 pre_scale_mux, amux_channel, reg[2];
742 u32 rsv, dec;
743 int ret;
744 int chid;
745
746 ret = fwnode_property_read_u32_array(fwnode, "reg", reg,
747 ARRAY_SIZE(reg));
748 if (ret) {
749 dev_err(dev, "invalid pre scale/mux or amux channel number %s\n",
750 name);
751 return ret;
752 }
753
754 pre_scale_mux = reg[0];
755 amux_channel = reg[1];
756
757 /* Find the right channel setting */
758 chid = 0;
759 hwchan = &hw_channels[0];
760 while (hwchan->datasheet_name) {
761 if (hwchan->pre_scale_mux == pre_scale_mux &&
762 hwchan->amux_channel == amux_channel)
763 break;
764 hwchan++;
765 chid++;
766 }
767 /* The sentinel does not have a name assigned */
768 if (!hwchan->datasheet_name) {
769 dev_err(dev, "could not locate channel %02x/%02x\n",
770 pre_scale_mux, amux_channel);
771 return -EINVAL;
772 }
773 ch->name = name;
774 ch->hwchan = hwchan;
775 /* Everyone seems to use absolute calibration except in special cases */
776 ch->calibration = VADC_CALIB_ABSOLUTE;
777 /* Everyone seems to use default ("type 2") decimation */
778 ch->decimation = VADC_DEF_DECIMATION;
779
780 if (!fwnode_property_read_u32(fwnode, "qcom,ratiometric", &rsv)) {
781 ch->calibration = VADC_CALIB_RATIOMETRIC;
782 if (rsv > XOADC_RSV_MAX) {
783 dev_err(dev, "%s too large RSV value %d\n", name, rsv);
784 return -EINVAL;
785 }
786 if (rsv == AMUX_RSV3) {
787 dev_err(dev, "%s invalid RSV value %d\n", name, rsv);
788 return -EINVAL;
789 }
790 }
791
792 /* Optional decimation, if omitted we use the default */
793 ret = fwnode_property_read_u32(fwnode, "qcom,decimation", &dec);
794 if (!ret) {
795 ret = qcom_vadc_decimation_from_dt(dec);
796 if (ret < 0) {
797 dev_err(dev, "%s invalid decimation %d\n",
798 name, dec);
799 return ret;
800 }
801 ch->decimation = ret;
802 }
803
804 iio_chan->channel = chid;
805 iio_chan->address = hwchan->amux_channel;
806 iio_chan->datasheet_name = hwchan->datasheet_name;
807 iio_chan->type = hwchan->type;
808 /* All channels are raw or processed */
809 iio_chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
810 BIT(IIO_CHAN_INFO_PROCESSED);
811 iio_chan->indexed = 1;
812
813 dev_dbg(dev,
814 "channel [PRESCALE/MUX: %02x AMUX: %02x] \"%s\" ref voltage: %d, decimation %d prescale %d/%d, scale function %d\n",
815 hwchan->pre_scale_mux, hwchan->amux_channel, ch->name,
816 ch->amux_ip_rsv, ch->decimation, hwchan->prescale.numerator,
817 hwchan->prescale.denominator, hwchan->scale_fn_type);
818
819 return 0;
820 }
821
pm8xxx_xoadc_parse_channels(struct pm8xxx_xoadc * adc)822 static int pm8xxx_xoadc_parse_channels(struct pm8xxx_xoadc *adc)
823 {
824 struct fwnode_handle *child;
825 struct pm8xxx_chan_info *ch;
826 int ret;
827 int i;
828
829 adc->nchans = device_get_child_node_count(adc->dev);
830 if (!adc->nchans) {
831 dev_err(adc->dev, "no channel children\n");
832 return -ENODEV;
833 }
834 dev_dbg(adc->dev, "found %d ADC channels\n", adc->nchans);
835
836 adc->iio_chans = devm_kcalloc(adc->dev, adc->nchans,
837 sizeof(*adc->iio_chans), GFP_KERNEL);
838 if (!adc->iio_chans)
839 return -ENOMEM;
840
841 adc->chans = devm_kcalloc(adc->dev, adc->nchans,
842 sizeof(*adc->chans), GFP_KERNEL);
843 if (!adc->chans)
844 return -ENOMEM;
845
846 i = 0;
847 device_for_each_child_node(adc->dev, child) {
848 ch = &adc->chans[i];
849 ret = pm8xxx_xoadc_parse_channel(adc->dev, child,
850 adc->variant->channels,
851 &adc->iio_chans[i],
852 ch);
853 if (ret) {
854 fwnode_handle_put(child);
855 return ret;
856 }
857 i++;
858 }
859
860 /* Check for required channels */
861 ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_125V);
862 if (!ch) {
863 dev_err(adc->dev, "missing 1.25V reference channel\n");
864 return -ENODEV;
865 }
866 ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_INTERNAL);
867 if (!ch) {
868 dev_err(adc->dev, "missing 0.625V reference channel\n");
869 return -ENODEV;
870 }
871 ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_MUXOFF);
872 if (!ch) {
873 dev_err(adc->dev, "missing MUXOFF reference channel\n");
874 return -ENODEV;
875 }
876
877 return 0;
878 }
879
pm8xxx_xoadc_probe(struct platform_device * pdev)880 static int pm8xxx_xoadc_probe(struct platform_device *pdev)
881 {
882 const struct xoadc_variant *variant;
883 struct pm8xxx_xoadc *adc;
884 struct iio_dev *indio_dev;
885 struct regmap *map;
886 struct device *dev = &pdev->dev;
887 int ret;
888
889 variant = device_get_match_data(dev);
890 if (!variant)
891 return -ENODEV;
892
893 indio_dev = devm_iio_device_alloc(dev, sizeof(*adc));
894 if (!indio_dev)
895 return -ENOMEM;
896 platform_set_drvdata(pdev, indio_dev);
897
898 adc = iio_priv(indio_dev);
899 adc->dev = dev;
900 adc->variant = variant;
901 init_completion(&adc->complete);
902 mutex_init(&adc->lock);
903
904 ret = pm8xxx_xoadc_parse_channels(adc);
905 if (ret)
906 return ret;
907
908 map = dev_get_regmap(dev->parent, NULL);
909 if (!map) {
910 dev_err(dev, "parent regmap unavailable.\n");
911 return -ENODEV;
912 }
913 adc->map = map;
914
915 /* Bring up regulator */
916 adc->vref = devm_regulator_get(dev, "xoadc-ref");
917 if (IS_ERR(adc->vref))
918 return dev_err_probe(dev, PTR_ERR(adc->vref),
919 "failed to get XOADC VREF regulator\n");
920 ret = regulator_enable(adc->vref);
921 if (ret) {
922 dev_err(dev, "failed to enable XOADC VREF regulator\n");
923 return ret;
924 }
925
926 ret = devm_request_threaded_irq(dev, platform_get_irq(pdev, 0),
927 pm8xxx_eoc_irq, NULL, 0, variant->name, indio_dev);
928 if (ret) {
929 dev_err(dev, "unable to request IRQ\n");
930 goto out_disable_vref;
931 }
932
933 indio_dev->name = variant->name;
934 indio_dev->modes = INDIO_DIRECT_MODE;
935 indio_dev->info = &pm8xxx_xoadc_info;
936 indio_dev->channels = adc->iio_chans;
937 indio_dev->num_channels = adc->nchans;
938
939 ret = iio_device_register(indio_dev);
940 if (ret)
941 goto out_disable_vref;
942
943 ret = pm8xxx_calibrate_device(adc);
944 if (ret)
945 goto out_unreg_device;
946
947 dev_info(dev, "%s XOADC driver enabled\n", variant->name);
948
949 return 0;
950
951 out_unreg_device:
952 iio_device_unregister(indio_dev);
953 out_disable_vref:
954 regulator_disable(adc->vref);
955
956 return ret;
957 }
958
pm8xxx_xoadc_remove(struct platform_device * pdev)959 static void pm8xxx_xoadc_remove(struct platform_device *pdev)
960 {
961 struct iio_dev *indio_dev = platform_get_drvdata(pdev);
962 struct pm8xxx_xoadc *adc = iio_priv(indio_dev);
963
964 iio_device_unregister(indio_dev);
965
966 regulator_disable(adc->vref);
967 }
968
969 static const struct xoadc_variant pm8018_variant = {
970 .name = "PM8018-XOADC",
971 .channels = pm8018_xoadc_channels,
972 };
973
974 static const struct xoadc_variant pm8038_variant = {
975 .name = "PM8038-XOADC",
976 .channels = pm8038_xoadc_channels,
977 };
978
979 static const struct xoadc_variant pm8058_variant = {
980 .name = "PM8058-XOADC",
981 .channels = pm8058_xoadc_channels,
982 .broken_ratiometric = true,
983 .prescaling = true,
984 };
985
986 static const struct xoadc_variant pm8921_variant = {
987 .name = "PM8921-XOADC",
988 .channels = pm8921_xoadc_channels,
989 .second_level_mux = true,
990 };
991
992 static const struct of_device_id pm8xxx_xoadc_id_table[] = {
993 {
994 .compatible = "qcom,pm8018-adc",
995 .data = &pm8018_variant,
996 },
997 {
998 .compatible = "qcom,pm8038-adc",
999 .data = &pm8038_variant,
1000 },
1001 {
1002 .compatible = "qcom,pm8058-adc",
1003 .data = &pm8058_variant,
1004 },
1005 {
1006 .compatible = "qcom,pm8921-adc",
1007 .data = &pm8921_variant,
1008 },
1009 { }
1010 };
1011 MODULE_DEVICE_TABLE(of, pm8xxx_xoadc_id_table);
1012
1013 static struct platform_driver pm8xxx_xoadc_driver = {
1014 .driver = {
1015 .name = "pm8xxx-adc",
1016 .of_match_table = pm8xxx_xoadc_id_table,
1017 },
1018 .probe = pm8xxx_xoadc_probe,
1019 .remove_new = pm8xxx_xoadc_remove,
1020 };
1021 module_platform_driver(pm8xxx_xoadc_driver);
1022
1023 MODULE_DESCRIPTION("PM8xxx XOADC driver");
1024 MODULE_LICENSE("GPL v2");
1025 MODULE_ALIAS("platform:pm8xxx-xoadc");
1026