Lines Matching defs:set
435 * are a secondary port with no SROM, and the bootstrap failed to set
615 * For 21140 check the data rate set in the conf file. Default is
999 * dnet_set_addr() -- set the physical network address on the board
1063 * be set explicitly in the 512 bit hash table. Hence the index into
1064 * the hash table is calculated and the bit set to enable reception
1448 * Now set the first/last buffer and own bits
1449 * Since the 21040 looks for these bits set in the
1463 * Safety check: make sure end-of-ring is set in last desc.
1527 * Check if receive interrupt bit is set
1670 * descriptors. If this happens an error bit should be set.
2048 /* Always want these bits set */
2503 * Check for Tx Error that gets set
2957 * we rely on the bootstrap to have properly set.
2959 * We also have a hack to try to set it ourselves, when the "first" port
2960 * attaches, if it has not already been properly set. However, this method
3128 linkset_add(uint32_t *set, int media)
3131 *set |= (1UL<<MEDIA_TP_FD) | (1UL<<MEDIA_TP);
3133 *set |= (1UL<<MEDIA_SYM_SCR_FD) | (1UL<<MEDIA_SYM_SCR);
3134 else *set |= 1UL<<media;
3240 * Full Duplex can be set and forced via the