Lines Matching defs:n
454 "find pipe %x\n", ep_descr->bEndpointAddress);
463 "failed to open rx data pipe, err = %x\n",
473 "find pipe %x\n",
483 "failed to open tx command pipe, err = %x\n",
492 "find pipe %x\n",
502 "failed to open tx pipe, err = %x\n",
511 "find pipe %x\n",
521 "failed to open rx command pipe, err = %x\n",
703 "rxblock flags=0x%x total=%d\n",
723 size_t n;
731 "mod %s: symbol %s not found\n", uath_fwmod, start_sym);
738 "mod %s: symbol %s not found\n", uath_fwmod, end_sym);
742 n = _PTRDIFF(end, p);
744 *len = n;
767 "module %s not found\n", uath_fwmod);
774 "could not get firmware\n");
781 "failed to alloc firmware memory\n");
789 UATH_DEBUG(UATH_DBG_MSG, "loading firmware size = %lu\n", fw_size);
802 "sending firmware block: %d bytes sending\n", mlen);
804 "sending firmware block: %d bytes remaining\n",
859 "could not allocate xfer buffer\n");
880 "failed to init cmd list %x\n", i);
925 "could not read capability %u\n", BE_32(cap));
1015 "could not read EEPROM offset 0x%02x\n", BE_32(which));
1028 "could not read MAC address\n");
1036 "could not read device serial number\n");
1155 "queue %x send %s [flags 0x%x] olen %d\n",
1161 "warning - odata is NULL\n");
1164 "warning - olen %x is short\n, olen");
1170 "Error writing command\n");
1184 "to cmd 0x%x (%u), queue %x\n",
1190 "to cmd 0x%x (%x), got %u, expected %u\n",
1208 "cr:%s(%d), flags:0x%x, tx queued %d\n",
1273 "%s: [ix %x] len=%x status %x\n",
1284 "code %x data len %u\n",
1301 "msg ignored\n",
1329 "cmd 0x%x olen %u cmd olen %u\n",
1337 "cmd 0x%x olen %u dlen %u\n",
1354 "receive TARGET STAERT\n");
1377 "receive Tx notification\n");
1382 "received device statistics\n");
1398 "cr:%s(%d), flags:0x%x, rx queued %d\n",
1409 "USB CR is not OK\n");
1424 "short xfer error\n");
1496 "uath_txeof(): cr:%s(%d), flags:0x%x, tx_data_queued %d\n",
1572 "cr:%s(%d), flags:0x%x, rx_data_queued %d\n",
1583 "USB CR is not OK\n");
1592 "wrong recv size %d\n", actlen);
1600 "strange response\n");
1608 "invalid seqnum %d, expected %d\n",
1622 "chunk seqnum %x, flags %x, length %u\n",
1645 "decrypterror %u keycachemiss %u\n",
1653 "bad descriptor (len=%d)\n", BE_32(desc->len));
1664 "allocate mblk failed.\n");
1820 "setting supported rates nrates=%d\n", rs->ir_nrates);
1854 "set %s led %s (steady)\n",
1874 "set %s led %s (blink)\n",
1894 "%d -> %d\n", ostate, nstate);
1923 "could not switch channel\n");
1935 "could not switch channel\n");
1940 "could not create connection\n");
1947 "could not set negotiated rate set\n");
1966 "could not write association id\n");
2010 "no TX buffer available!\n");
2023 "can't alloc mblk.\n");
2099 "bogus frame type 0x%x (%s)\n",
2142 "uath online\n");
2152 "could not open pipes\n");
2159 "could not download firmware\n");
2170 "could not reset device %x\n", err);
2176 "usb_client_attach failed\n");
2184 "usb_get_dev_data failed\n");
2192 "HW does not match\n");
2196 "vendorId = %x,deviceID = %x, flags = %x\n",
2207 "could not open pipes\n");
2218 "could not allocate Tx command list\n");
2225 "could not init RX command list\n");
2235 "could not initialize adapter\n");
2242 "could not get device capabilities\n");
2249 "could not get dev status\n");
2257 "different device connected %x\n", err);
2264 "device re-connect failed\n");
2293 "stage 0 in re-connect\n");
2316 "offline success\n");
2332 "no bufs\n");
2353 "send flush ix %d\n", desc->msgid);
2399 "set led state %sconnected\n", connected ? "" : "!");
2423 "could not write %d bytes to register 0x%02x\n", len, reg);
2442 "could not write register 0x%02x\n",
2456 "could not set channel\n");
2464 "could not reset Tx queues\n");
2472 "could not init Tx queues\n");
2479 "could not set led state\n");
2486 "could not flush pipes\n");
2503 "setting Rx filter=0x%x flags=0x%x\n", bits, op);
2535 "set channel %d, flags 0x%x freq %u\n",
2654 "could not start target\n");
2659 "%s returns handle: 0x%x\n",
2666 "could not switch channel, error %d\n", err);
2679 "could not alloc rx xfer %x\n", i);
2707 "failed to initialize uath hardware\n");
2719 "uath stop now\n");
2732 "uath resume now\n");
2738 "no or different device connected\n");
2748 "could not init RX command list\n");
2755 "hardware init failed\n");
2780 "device configuration failed\n");
2982 "discard, state %u\n", ic->ic_state);
3029 "ddi_soft_state_zalloc failed\n");
3040 "usb_client_attach failed\n");
3048 "usb_get_dev_data failed\n");
3057 "HW does not match\n");
3062 "vendorId = %x,deviceID = %x, flags = %x\n",
3072 "could not open pipes\n");
3080 "could not read firmware %s, err %d\n",
3091 "could not re-attach, err %d\n", err);
3098 "firmware download and re-attach successfully\n");
3116 "could not allocate Tx command list\n");
3123 "could not init RX command list\n");
3133 "could not initialize adapter\n");
3140 "could not get device capabilities\n");
3147 "could not get dev status\n");
3152 "MAC address is: %x:%x:%x:%x:%x:%x\n",
3209 "MAC version mismatch\n");
3227 "mac_register() error %x\n", err);
3235 "failed to register events\n");
3248 "ddi_create_minor_node() failed\n");
3256 "attach success\n");