Lines Matching refs:screen
51 # as needed by software such as screen-oriented editors.
475 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
482 # beware of screen size problems and memory relative cursor addressing.
886 # All linux kernels since 1.2.13 (at least) set the screen size
943 # Using SI/SO has the drawback that it confuses screen. SCS would work.
2130 # the screen annoyingly. You can type "reset" to get them set.
2325 # Clearing the screen will clobber status line.
2344 # string in the canonical vt100 entry above leaves the screen littered
2353 # VT125 Graphics CRT. Clear screen also erases graphics
3122 # X10/6.6 11/7/86, minus alternate screen, plus (csr)
3701 xterm1|xterm terminal emulator ignoring the alternate screen buffer,
3860 # xterm alternate screen controls do not restore cursor position properly
4506 # apparently implements alternate screen like xterm
4828 # Entries for use by the `screen' program by Juergen Weigert,
4829 # Michael Schroeder, Oliver Laumann. The screen and
4830 # screen-w entries came with version 3.7.1. The screen2 and screen3 entries
4832 # (screen: added <cnorm> on ANSI model -- esr)
4834 # 'screen' defines extensions to termcap. Some are used in its terminal
4842 # tested with screen 3.09.08
4843 screen|VT 100/ANSI X3.64 virtual terminal,
4868 # The bce and status-line entries are from screen 3.9.13 (and require some
4870 screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
4872 ech@, use=screen,
4873 screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
4874 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
4880 # are less portable than the generic "screen" 8 color entries: Their
4884 screen-16color|GNU Screen with 16 colors,
4885 use=ibm+16color, use=screen,
4887 screen-16color-s|GNU Screen with 16 colors and status line,
4888 use=ibm+16color, use=screen-s,
4890 screen-16color-bce|GNU Screen with 16 colors and BCE,
4891 use=ibm+16color, use=screen-bce,
4893 screen-16color-bce-s|GNU Screen with 16 colors BCE and status line,
4894 bce, use=ibm+16color, use=screen-s,
4899 screen-256color|GNU Screen with 256 colors,
4901 initc@, use=xterm+256color, use=screen,
4903 screen-256color-s|GNU Screen with 256 colors and status line,
4905 initc@, use=xterm+256color, use=screen-s,
4907 screen-256color-bce|GNU Screen with 256 colors and BCE,
4909 initc@, use=xterm+256color, use=screen-bce,
4911 screen-256color-bce-s|GNU Screen with 256 colors BCE and status line,
4913 initc@, use=xterm+256color, use=screen-s,
4918 # When screen tries to figure out a terminal name for
4919 # itself, it first looks for an entry named "screen.<term>",
4921 # no such entry exists, screen tries "screen" (or "screen-w"
4925 # Notwithstanding the manpage, screen uses its own notion of the termcap
4926 # and some keys from "screen.<term>" are ignored. Here is an entry which
4927 # covers those (tested with screen 4.00.02) -TD
4928 screen+fkeys|function-keys according to screen,
4935 # (a) screen does not support invis.
4936 # (b) screen's implementation of bw is incorrect according to tack.
4937 # (c) screen appears to hardcode the strings for khome/kend, making it
4938 # necessary to override the "use=" clause's values (screen+fkeys).
4939 # (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
4940 # which is NOT the same as the terminfo screen.<term>.
4941 # (e) when screen finds one of these customized entries, it sets $TERM to
4942 # match. Hence, no "screen.xterm" entry is provided, since that would
4948 screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
4952 use=screen+fkeys, use=xterm-new,
4955 screen.xterm-r6|screen customized for X11R6 xterm,
4956 bw, use=screen+fkeys, use=xterm-r6,
4957 # Color applications running in screen and TeraTerm do not play well together
4959 screen.teraterm|disable ncv in teraterm,
4962 use=screen+fkeys, use=screen,
4964 screen.rxvt|screen in rxvt,
4967 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
4968 use=rxvt+pcfkeys, use=vt220+keypad, use=screen,
4969 screen.Eterm|screen in Eterm,
4970 use=screen+fkeys, use=Eterm,
4971 screen.mrxvt|screen in mrxvt,
4972 use=screen+fkeys, use=mrxvt,
4973 screen.vte|screen in any VTE-based terminal,
4974 use=screen+fkeys, use=vte,
4975 screen.gnome|screen in GNOME Terminal,
4976 use=screen+fkeys, use=gnome,
4977 screen.konsole|screen in KDE console window,
4978 use=screen+fkeys, use=konsole,
4980 screen.linux|screen in linux console,
4982 kbs=\177, kcbt@, use=screen+fkeys, use=screen,
4983 screen.mlterm|screen in mlterm,
4984 use=screen+fkeys, use=mlterm,
4986 # The default "screen" entry is reasonably portable, but not optimal for the
4988 # screen since 3.9.13, and when used, will require fewer characters to be sent
4992 # feature in your screen configuration.
4996 # term screen-bce
4999 screen-bce.xterm-new|screen optimized for modern xterm,
5001 ech@, use=screen.xterm-new,
5002 screen-bce.rxvt|screen optimized for rxvt,
5004 ech@, use=screen.rxvt,
5005 screen-bce.Eterm|screen optimized for Eterm,
5007 ech@, use=screen.Eterm,
5008 screen-bce.mrxvt|screen optimized for mrxvt,
5010 ech@, use=screen.mrxvt,
5011 screen-bce.gnome|screen optimized for GNOME-Terminal,
5013 ech@, use=screen.gnome,
5014 screen-bce.konsole|screen optimized for KDE console window,
5016 ech@, use=screen.konsole,
5017 screen-bce.linux|screen optimized for linux console,
5019 ech@, use=screen.linux,
5020 screen-bce.mlterm|screen optimized for mlterm,
5022 ech@, use=screen.mlterm,
5024 screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
5025 cols#132, use=screen,
5186 # one but in screen size
5358 # some control characters you type will do strange things to the screen.
6238 # Note: no <home> on HPs since that homes to top of memory, not screen.
6339 # this for screen opt.
6409 # memory relative instead of screen relative, as we need.
6449 # a touch screen, which we don't describe here.
6455 # leave the screen blank.
6500 scrhp|screen relative addressing for new HP ttys,
6580 # <is2> sets the screen to be 80 columns wide
6829 # was being held to ground would trigger a send of the top line on the screen.
7160 # "system line" at the bottom of the screen blank (for those who
7511 # screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
7571 # character/line/screen/page), and it does not signal this over the
7700 # operations for uploading all or part of the screen; and block-mode
7705 # which parts of the screen are edited/sent/printed (by <mc0>).
7709 # support a few extra escape sequences for manipulating the off-screen
7793 # This uses the second page memory option to save & restore screen
8335 # <smul> strings are klutzy, but at least use no screen space.
8528 # and with 33 lines. clear screen is modified here to
8622 # than one attribute is put on the screen at once, all attributes
8626 # to correctly handle multiple attributes on a screen.
8751 # <msgr> should be set but the clear screen fails when in
8752 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
8903 # setup parameter controls the number of lines on the screen.
8905 # number of lines in a page. The screen can display 25 lines max.
8909 # (msgr) should be set but the clear screen fails when in
8910 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
8954 # a screen and makes screen(1) behave badly, so it is disabled too. The nice
9049 # but garbage may be left on the screen when you switch from
9124 # put on the screen at once, all attributes will be changed
9128 # to correctly handle multiple attributes on a screen.
9187 # 24 line screen with status line.
9196 # <dch> leave trash on the screen when used without XON/XOFF.
9296 # and not the number of lines on the screen.
9459 # Wyse 370 -- 24 line screen with status line.
10216 # <is3> set screen color to black,
10494 # screen labeled (soft keys/action blocks) are labeled. Function key
10495 # 9 corresponds to the leftmost touch target on the screen,
10527 # Function key 9 corresponds to the leftmost touch target on the screen,
10660 # assumptions: <ind> (scroll forward one line) is only done at screen bottom
11099 # The following represents the screen layout along with the associated
11101 # not appear on the screen but are shown to reference the bezel buttons.
11103 # position relative to the screen.
11137 # Note: XXXX represents the screen buttons
11389 # Ann Arbor made dream terminals for hackers -- large screen sizes and huge
11391 # allowing up to 76-character screen heights! They were reachable at:
11405 # split out into several for the various screen sizes by dave-yost@rand
11408 # status line moved to top of screen, <flash> removed 5/82
11535 # 1. Total number of lines on the screen.
11538 # 4. Total number of lines on the screen, the same as the first parameter.
11847 # Erase screen SUB
11896 # - <clear=\EG\Ek>: clears screen and visual attributes without affecting
12170 # screen resolution, a larger screen, at least 1 page of memory above and
12171 # below the screen, apparently pages of memory right and left of the screen
12281 # These have only window relative cursor addressing, not screen
12284 # window for screen style programs.
12423 # lm: Pointless, given that this definition locks a single screen of
12500 # There are two ways to flash the screen, both of which have their drawbacks.
12506 # The second way to do a flash is to set the screen to inverse video, pad for a
12508 # that the screen wasn't ALREADY in inverse video, or that the user may prefer
12520 # but screen scroll functions are destructive and do not make use of it.
12582 # "transparent print" (which doesn't copy data to the screen, and
12584 # (which does duplicate printed data on the screen, in which case mc4=
12667 # 191 lines of memory and 24 screen lines for regular use.
12929 # and scroll the screen up, or a direct vertical scroll command. The 460 and
13001 # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
13072 # Like the D470C but with fewer colors and screen editing features.
13132 # - (should reset scrolling regions, but that glitches the screen)
13167 # - (should reset scrolling regions, but that glitches the screen)
13245 # - (should reset scrolling regions, but that glitches the screen)
13365 # - (should reset scrolling regions, but that glitches the screen)
13385 # - (should reset scrolling regions, but that glitches the screen)
13432 # - (should reset scrolling regions, but that glitches the screen)
13651 # of the "host" program. Known bug: <ed> clears the whole screen, so it's
13829 # (notably after \EK and <nl> at bottom of screen).
13840 # The <nl> string is designed for last line of screen ONLY; cup to
13843 # There is one understood bug. It is that the screen appears to
13866 # the screen, then it has dropped into ENTER mode; hit
13906 # The sb3 puts garbage on the bottom of the screen when you scroll with
14026 # redraw the screen. h1000 is untested. It doesn't work in
14517 #ESC * clear screen
14601 #ESC V 4 n select screen mode:
14602 # n = 0 page screen mode
14603 # n = 1 virtual screen mode
14649 #ESC b set foreground colour screen
14656 # n = 4 screen display test
14663 #ESC d set background colour screen
14675 #ESC l n select virtual screen:
14676 # n = 0 screen 1
14677 # n = 1 screen 2
14679 #ESC n p1 select display screen:
14680 # p1 = 0 screen 1
14681 # p1 = 1 screen 2
14682 # p1 = 2 screen 3
14683 # p1 = 3 screen 4
14932 # black-on-white overscanning screen.
15237 # you turn up the brightness so far that lines show up on the screen.
16181 # and support vector graphics on a main screen with an attached "dialogue
16465 # look good for screen editing. In the dialog area, you can't move the cursor
16825 # The clear key on a IIgs will do something like clear-screen,
16945 # 1 screen, while in R2 ^U doesn't.
17006 # Also setting the number of columns glitches the screen annoyingly.
17168 # If you're looking for a description of the full-screen system
17409 # full-screen system console derived from a NetBSD framebuffer
17538 # Building blocks for specific screen sizes
17601 # Combinations for specific screen sizes
17735 # line tended to disappear and reappear depending on how the screen
18079 # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
18225 # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
18237 # then moving the screen that much. Then vi comes along and
18238 # paints lines in on the bottom line of the screen, so you get
18312 # RIS (erases screen): ^[c
18398 # 80 columns screen.
18408 # RIS (erases screen): esc c
18417 # Select erase screen: esc [ J
18428 # SM DECCOLM 132-column screen: esc [ ? 3 h
18429 # RM DECCOLM 80-column screen: esc [ ? 3 l
18432 # SM DECSCNM screen light backgr. esc [ ? 5 h
18433 # RM DECSCNM screen dark backgr. esc [ ? 5 l
18514 # 80 columns screen.
18516 # RIS (erases screen): esc c
18525 # Select erase screen: csi J
18536 # SM DECCOLM 132-column screen: csi ? 3 h
18537 # RM DECCOLM 80-column screen: csi ? 3 l
18540 # SM DECSCNM screen light backgr. csi ? 5 h
18541 # RM DECSCNM screen dark backgr. csi ? 5 l
18616 # 80 columns screen.
18639 # 80 columns screen.
18741 # normal screen, 8 bits, 132 columns terminal.
18756 # that is smaller than the screen, and puts up a warning message
18758 # window back to be the whole screen, and puts the cursor at just
19147 # already on the screen, instead of just killing to the end of
19418 # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
19425 # with TERM=mod and screen set to 80x48 but it's not obvious. Only
19677 # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
20046 # mode the screen size is 1024x864 pixels.
20108 masscomp1|masscomp large screen version 1,
20110 masscomp2|masscomp large screen version 2,
20278 # If no tab is set or the terminal's in a bad mood, it glitches the screen
20424 # It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
20491 # 2) They had a handy debugging feature where you could split-screen the
20926 # Erase from cursor to end of screen Esc [ 0 J or Esc [ J
20927 # Erase from beginning of screen to cursor Esc [ 1 J
20928 # Erase entire screen Esc [ 2 J
21004 # CSI 2i send screen as input
21054 # CSI c (clear) clear screen
21353 # * Added `screen' entries from FSF's screen-3.6.2.
21474 # UFO file; also, obsolete small-screen hardware; also, entries which
21575 # * screen entry update for 3.7.1 from Michael Alan Dorman.
21790 # * II -> ii in pcvtXX, screen, xterm.
21813 # * modify rxvt terminfo description to clear alternate screen before
21814 # switching back to normal screen, for compatibility with applications
21909 # * corrected cnorm, added el1 in 'screen' description -TD
21964 # * add obsolete and extended capabilities to 'screen' -TD
21990 # * move screen's AX extension to ecma+color, modify several entries to
22034 # * add S0, E0 extensions to screen's entry -TD
22053 # * screen 3.9.8 allows xterm mouse controls to pass-through
22059 # * modify 'screen' khome/kend to match screen 3.09.08
22060 # * add examples of 'screen' customization (screen.xterm-xfree86,
22061 # screen.xterm-r6, screen.teraterm) -TD
22070 # * corrected/updated screen.xterm-xfree86
22104 # * add kcbt to screen entry -TD
22128 # * add screen-bce, screen-s entries -TD
22138 # * corrected acs for screen.teraterm -TD
22170 # * add screen.linux -TD
22182 # screen, to make the entries more portable -TD
22247 # Eterm, screen. (The xterm entries are left alone - old ones for
22411 # * add screen.rxvt -TD
22414 # * add screen+fkeys (prompted by Debian #478094) -TD
22417 # * add screen.mlterm -TD
22440 # * add screen.Eterm -TD
22482 # * add several screen-bce.XXX entries -TD
22485 # * modify screen-bce.XXX entries to exclude ech, since screen's color
22510 # xterm-style mouse- and title-controls, for "screen" which
22535 # * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno