Lines Matching refs:screen
51 # as needed by software such as screen-oriented editors.
455 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
461 # beware of screen size problems and memory relative cursor addressing.
818 # All linux kernels since 1.2.13 (at least) set the screen size
870 # Using SI/SO has the drawback that it confuses screen. SCS would work.
1876 # the screen annoyingly. You can type "reset" to get them set.
2062 # Clearing the screen will clobber status line.
2080 # string in the canonical vt100 entry above leaves the screen littered
2089 # VT125 Graphics CRT. Clear screen also erases graphics
2768 # X10/6.6 11/7/86, minus alternate screen, plus (csr)
3231 xterm1|xterm terminal emulator ignoring the alternate screen buffer:\
3372 # xterm alternate screen controls do not restore cursor position properly
3946 # apparently implements alternate screen like xterm
4214 # Entries for use by the `screen' program by Juergen Weigert,
4215 # Michael Schroeder, Oliver Laumann. The screen and
4216 # screen-w entries came with version 3.7.1. The screen2 and screen3 entries
4218 # (screen: added :ve: on ANSI model -- esr)
4220 # 'screen' defines extensions to termcap. Some are used in its terminal
4228 # tested with screen 3.09.08
4229 screen|VT 100/ANSI X3.64 virtual terminal:\
4249 # The bce and status-line entries are from screen 3.9.13 (and require some
4251 screen-bce|VT 100/ANSI X3.64 virtual terminal with bce:\
4253 :ec@:tc=screen:
4254 screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line:\
4255 :ds=\E_\E\\:fs=\E\\:ts=\E_:tc=screen:
4261 # are less portable than the generic "screen" 8 color entries: Their
4265 screen-16color|GNU Screen with 16 colors:\
4266 :tc=ibm+16color:tc=screen:
4268 screen-16color-s|GNU Screen with 16 colors and status line:\
4269 :tc=ibm+16color:tc=screen-s:
4271 screen-16color-bce|GNU Screen with 16 colors and BCE:\
4272 :tc=ibm+16color:tc=screen-bce:
4274 screen-16color-bce-s|GNU Screen with 16 colors, BCE, and status line:\
4275 :ut:tc=ibm+16color:tc=screen-s:
4280 screen-256color|GNU Screen with 256 colors:\
4282 :Ic@:tc=xterm+256color:tc=screen:
4284 screen-256color-s|GNU Screen with 256 colors and status line:\
4286 :Ic@:tc=xterm+256color:tc=screen-s:
4288 screen-256color-bce|GNU Screen with 256 colors and BCE:\
4290 :Ic@:tc=xterm+256color:tc=screen-bce:
4292 screen-256color-bce-s|GNU Screen with 256 colors, BCE, and status line:\
4294 :Ic@:tc=xterm+256color:tc=screen-s:
4299 # When screen tries to figure out a terminal name for
4300 # itself, it first looks for an entry named "screen.<term>",
4302 # no such entry exists, screen tries "screen" (or "screen-w"
4306 # Notwithstanding the manpage, screen uses its own notion of the termcap
4307 # and some keys from "screen.<term>" are ignored. Here is an entry which
4308 # covers those (tested with screen 4.00.02) -TD
4309 screen+fkeys|function-keys according to screen:\
4315 # (a) screen does not support invis.
4316 # (b) screen's implementation of bw is incorrect according to tack.
4317 # (c) screen appears to hardcode the strings for khome/kend, making it
4318 # necessary to override the "use=" clause's values (screen+fkeys).
4319 # (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
4320 # which is NOT the same as the terminfo screen.<term>.
4321 # (e) when screen finds one of these customized entries, it sets $TERM to
4322 # match. Hence, no "screen.xterm" entry is provided, since that would
4328 screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm:\
4330 :#3@:%c@:%e@:mk@:ml@:mu@:tc=screen+fkeys:tc=xterm-new:
4333 screen.xterm-r6|screen customized for X11R6 xterm:\
4334 :bw:tc=screen+fkeys:tc=xterm-r6:
4335 # Color applications running in screen and TeraTerm do not play well together
4337 screen.teraterm|disable ncv in teraterm:\
4340 :tc=screen+fkeys:tc=screen:
4342 screen.rxvt|screen in rxvt:\
4344 :kd=\EOB:kl=\EOD:kr=\EOC:ku=\EOA:vb@:vs@:tc=screen+fkeys:\
4345 :tc=vt100+enq:tc=rxvt+pcfkeys:tc=vt220+keypad:tc=screen:
4346 screen.Eterm|screen in Eterm:\
4347 :tc=screen+fkeys:tc=Eterm:
4348 screen.mrxvt|screen in mrxvt:\
4349 :tc=screen+fkeys:tc=mrxvt:
4350 screen.vte|screen in any VTE-based terminal:\
4351 :tc=screen+fkeys:tc=vte:
4352 screen.gnome|screen in GNOME Terminal:\
4353 :tc=screen+fkeys:tc=gnome:
4354 screen.konsole|screen in KDE console window:\
4355 :tc=screen+fkeys:tc=konsole:
4357 screen.linux|screen in linux console:\
4359 :kB@:kb=\177:tc=screen+fkeys:tc=screen:
4360 screen.mlterm|screen in mlterm:\
4361 :tc=screen+fkeys:tc=mlterm:
4363 # The default "screen" entry is reasonably portable, but not optimal for the
4365 # screen since 3.9.13, and when used, will require fewer characters to be sent
4369 # feature in your screen configuration.
4373 # term screen-bce
4376 screen-bce.xterm-new|screen optimized for modern xterm:\
4378 :ec@:tc=screen.xterm-new:
4379 screen-bce.rxvt|screen optimized for rxvt:\
4381 :ec@:tc=screen.rxvt:
4382 screen-bce.Eterm|screen optimized for Eterm:\
4384 :ec@:tc=screen.Eterm:
4385 screen-bce.mrxvt|screen optimized for mrxvt:\
4387 :ec@:tc=screen.mrxvt:
4388 screen-bce.gnome|screen optimized for GNOME-Terminal:\
4390 :ec@:tc=screen.gnome:
4391 screen-bce.konsole|screen optimized for KDE console window:\
4393 :ec@:tc=screen.konsole:
4394 screen-bce.linux|screen optimized for linux console:\
4396 :ec@:tc=screen.linux:
4397 screen-bce.mlterm|screen optimized for mlterm:\
4399 :ec@:tc=screen.mlterm:
4401 screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols:\
4402 :co#132:tc=screen:
4546 # one but in screen size
4703 # some control characters you type will do strange things to the screen.
5510 # Note: no :ho: on HPs since that homes to top of memory, not screen.
5607 # this for screen opt.
5675 # memory relative instead of screen relative, as we need.
5709 # a touch screen, which we don't describe here.
5715 # leave the screen blank.
5749 scrhp|screen relative addressing for new HP ttys:\
5824 # :is: sets the screen to be 80 columns wide
6038 # was being held to ground would trigger a send of the top line on the screen.
6353 # "system line" at the bottom of the screen blank (for those who
6684 # screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
6744 # character/line/screen/page), and it does not signal this over the
6873 # operations for uploading all or part of the screen; and block-mode
6878 # which parts of the screen are edited/sent/printed (by <mc0>).
6882 # support a few extra escape sequences for manipulating the off-screen
6961 # This uses the second page memory option to save & restore screen
7476 # :us: strings are klutzy, but at least use no screen space.
7638 # and with 33 lines. clear screen is modified here to
7722 # than one attribute is put on the screen at once, all attributes
7726 # to correctly handle multiple attributes on a screen.
7829 # :ms: should be set but the clear screen fails when in
7830 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
7961 # setup parameter controls the number of lines on the screen.
7963 # number of lines in a page. The screen can display 25 lines max.
7967 # (msgr) should be set but the clear screen fails when in
7968 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
8009 # a screen and makes screen(1) behave badly, so it is disabled too. The nice
8088 # but garbage may be left on the screen when you switch from
8152 # put on the screen at once, all attributes will be changed
8156 # to correctly handle multiple attributes on a screen.
8201 # 24 line screen with status line.
8210 # :DC: leave trash on the screen when used without XON/XOFF.
8287 # and not the number of lines on the screen.
8426 # Wyse 370 -- 24 line screen with status line.
9101 # :i3: set screen color to black,
9327 # screen labeled (soft keys/action blocks) are labeled. Function key
9328 # 9 corresponds to the leftmost touch target on the screen,
9355 # Function key 9 corresponds to the leftmost touch target on the screen,
9442 # assumptions: :sf: (scroll forward one line) is only done at screen bottom
9777 # The following represents the screen layout along with the associated
9779 # not appear on the screen but are shown to reference the bezel buttons.
9781 # position relative to the screen.
9815 # Note: XXXX represents the screen buttons
10053 # Ann Arbor made dream terminals for hackers -- large screen sizes and huge
10055 # allowing up to 76-character screen heights! They were reachable at:
10069 # split out into several for the various screen sizes by dave-yost@rand
10072 # status line moved to top of screen, :vb: removed 5/82
10197 # 1. Total number of lines on the screen.
10200 # 4. Total number of lines on the screen, the same as the first parameter.
10475 # Erase screen SUB
10520 # - :cl=\EG\Ek:: clears screen and visual attributes without affecting
10769 # screen resolution, a larger screen, at least 1 page of memory above and
10770 # below the screen, apparently pages of memory right and left of the screen
10872 # These have only window relative cursor addressing, not screen
10875 # window for screen style programs.
11008 # lm: Pointless, given that this definition locks a single screen of
11085 # There are two ways to flash the screen, both of which have their drawbacks.
11091 # The second way to do a flash is to set the screen to inverse video, pad for a
11093 # that the screen wasn't ALREADY in inverse video, or that the user may prefer
11105 # but screen scroll functions are destructive and do not make use of it.
11167 # "transparent print" (which doesn't copy data to the screen, and
11169 # (which does duplicate printed data on the screen, in which case mc4=
11223 # 191 lines of memory and 24 screen lines for regular use.
11444 # and scroll the screen up, or a direct vertical scroll command. The 460 and
11506 # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
11574 # Like the D470C but with fewer colors and screen editing features.
11633 # - (should reset scrolling regions, but that glitches the screen)
11665 # - (should reset scrolling regions, but that glitches the screen)
11738 # - (should reset scrolling regions, but that glitches the screen)
11846 # - (should reset scrolling regions, but that glitches the screen)
11864 # - (should reset scrolling regions, but that glitches the screen)
11911 # - (should reset scrolling regions, but that glitches the screen)
12102 # of the "host" program. Known bug: :cd: clears the whole screen, so it's
12264 # (notably after \EK and <nl> at bottom of screen).
12275 # The <nl> string is designed for last line of screen ONLY; cup to
12278 # There is one understood bug. It is that the screen appears to
12301 # the screen, then it has dropped into ENTER mode; hit
12337 # The sb3 puts garbage on the bottom of the screen when you scroll with
12450 # redraw the screen. h1000 is untested. It doesn't work in
12863 #ESC * clear screen
12947 #ESC V 4 n select screen mode:
12948 # n = 0 page screen mode
12949 # n = 1 virtual screen mode
12995 #ESC b set foreground colour screen
13002 # n = 4 screen display test
13009 #ESC d set background colour screen
13021 #ESC l n select virtual screen:
13022 # n = 0 screen 1
13023 # n = 1 screen 2
13025 #ESC n p1 select display screen:
13026 # p1 = 0 screen 1
13027 # p1 = 1 screen 2
13028 # p1 = 2 screen 3
13029 # p1 = 3 screen 4
13261 # black-on-white overscanning screen.
13546 # you turn up the brightness so far that lines show up on the screen.
14322 # and support vector graphics on a main screen with an attached "dialogue
14584 # look good for screen editing. In the dialog area, you can't move the cursor
14911 # The clear key on a IIgs will do something like clear-screen,
15015 # 1 screen, while in R2 ^U doesn't.
15070 # Also setting the number of columns glitches the screen annoyingly.
15230 # If you're looking for a description of the full-screen system
15462 # full-screen system console derived from a NetBSD framebuffer
15583 # Building blocks for specific screen sizes
15646 # Combinations for specific screen sizes
15775 # line tended to disappear and reappear depending on how the screen
16084 # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
16213 # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
16225 # then moving the screen that much. Then vi comes along and
16226 # paints lines in on the bottom line of the screen, so you get
16292 # RIS (erases screen): ^[c
16374 # 80 columns screen.
16384 # RIS (erases screen): esc c
16393 # Select erase screen: esc [ J
16404 # SM DECCOLM 132-column screen: esc [ ? 3 h
16405 # RM DECCOLM 80-column screen: esc [ ? 3 l
16408 # SM DECSCNM screen light backgr. esc [ ? 5 h
16409 # RM DECSCNM screen dark backgr. esc [ ? 5 l
16478 # 80 columns screen.
16480 # RIS (erases screen): esc c
16489 # Select erase screen: csi J
16500 # SM DECCOLM 132-column screen: csi ? 3 h
16501 # RM DECCOLM 80-column screen: csi ? 3 l
16504 # SM DECSCNM screen light backgr. csi ? 5 h
16505 # RM DECSCNM screen dark backgr. csi ? 5 l
16568 # 80 columns screen.
16588 # 80 columns screen.
16681 # normal screen, 8 bits, 132 columns terminal.
16696 # that is smaller than the screen, and puts up a warning message
16698 # window back to be the whole screen, and puts the cursor at just
17062 # already on the screen, instead of just killing to the end of
17308 # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
17315 # with TERM=mod and screen set to 80x48 but it's not obvious. Only
17551 # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
17886 # mode the screen size is 1024x864 pixels.
17942 masscomp1|masscomp large screen version 1:\
17944 masscomp2|masscomp large screen version 2:\
18095 # If no tab is set or the terminal's in a bad mood, it glitches the screen
18223 # It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
18277 # 2) They had a handy debugging feature where you could split-screen the
18710 # Erase from cursor to end of screen Esc [ 0 J or Esc [ J
18711 # Erase from beginning of screen to cursor Esc [ 1 J
18712 # Erase entire screen Esc [ 2 J
18788 # CSI 2i send screen as input
18838 # CSI c (clear) clear screen
19137 # * Added `screen' entries from FSF's screen-3.6.2.
19258 # UFO file; also, obsolete small-screen hardware; also, entries which
19359 # * screen entry update for 3.7.1 from Michael Alan Dorman.
19574 # * II -> ii in pcvtXX, screen, xterm.
19597 # * modify rxvt terminfo description to clear alternate screen before
19598 # switching back to normal screen, for compatibility with applications
19693 # * corrected cnorm, added el1 in 'screen' description -TD
19748 # * add obsolete and extended capabilities to 'screen' -TD
19774 # * move screen's AX extension to ecma+color, modify several entries to
19818 # * add S0, E0 extensions to screen's entry -TD
19837 # * screen 3.9.8 allows xterm mouse controls to pass-through
19843 # * modify 'screen' khome/kend to match screen 3.09.08
19844 # * add examples of 'screen' customization (screen.xterm-xfree86,
19845 # screen.xterm-r6, screen.teraterm) -TD
19854 # * corrected/updated screen.xterm-xfree86
19888 # * add kcbt to screen entry -TD
19912 # * add screen-bce, screen-s entries -TD
19922 # * corrected acs for screen.teraterm -TD
19954 # * add screen.linux -TD
19966 # screen, to make the entries more portable -TD
20031 # Eterm, screen. (The xterm entries are left alone - old ones for
20195 # * add screen.rxvt -TD
20198 # * add screen+fkeys (prompted by Debian #478094) -TD
20201 # * add screen.mlterm -TD
20224 # * add screen.Eterm -TD
20266 # * add several screen-bce.XXX entries -TD
20269 # * modify screen-bce.XXX entries to exclude ech, since screen's color
20294 # xterm-style mouse- and title-controls, for "screen" which
20319 # * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno