Lines Matching refs:full
32 overheads used for both full and high speed host controller drivers. This
43 The following overheads, formulas and scheme are applicable both to full speed
45 which perform full/low speed transactions.
59 1 full speed bit time 83.54 ns
93 ports. The minimum of 4 full speed bit time.
135 3.The Low-Speed clock is eight times slower than full speed i.e. 1/8th of
136 the full speed.
141 one low-speed transaction takes 0x628h full speed bits (197 bytes),
314 This field is used for for high, full and low speed usb device interrupt
317 isochronous transaction. For full/low speed devices, it will tell when to
322 * For all low/full speed devices, and for high speed devices with
349 This field is used only for full/low speed usb device interrupt and
356 /* Only full/low speed devices */
398 full/low speed device connected through a high speed hub, you need both
403 TT acts as a full speed host controller & its bandwidth allocation scheme
404 overhead calculations and other details are similar to those of a full
457 High speed split transactions (for full and low speed devices only):
459 For a given full/low speed interrupt or isochronous endpoint, we need both
460 high speed and TT bandwidths. The TT bandwidth allocation is same as full
461 speed bus bandwidth allocation. Please refer to the "full speed bus"
465 bandwidth needed for this full/low speed endpoint.