77 	phy->ops.check_polarity	= e1000_check_polarity_m88;  in e1000_init_phy_params_82540()
78 	phy->ops.commit		= e1000_phy_sw_reset_generic;  in e1000_init_phy_params_82540()
79 	phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88;  in e1000_init_phy_params_82540()
80 	phy->ops.get_cable_length = e1000_get_cable_length_m88;  in e1000_init_phy_params_82540()
81 	phy->ops.get_cfg_done	= e1000_get_cfg_done_generic;  in e1000_init_phy_params_82540()
82 	phy->ops.read_reg	= e1000_read_phy_reg_m88;  in e1000_init_phy_params_82540()
83 	phy->ops.reset		= e1000_phy_hw_reset_generic;  in e1000_init_phy_params_82540()
84 	phy->ops.write_reg	= e1000_write_phy_reg_m88;  in e1000_init_phy_params_82540()
85 	phy->ops.get_info	= e1000_get_phy_info_m88;  in e1000_init_phy_params_82540()
86 	phy->ops.power_up	= e1000_power_up_phy_copper;  in e1000_init_phy_params_82540()
87 	phy->ops.power_down	= e1000_power_down_phy_copper_82540;  in e1000_init_phy_params_82540()
143 	nvm->ops.acquire	= e1000_acquire_nvm_generic;  in e1000_init_nvm_params_82540()
144 	nvm->ops.read		= e1000_read_nvm_microwire;  in e1000_init_nvm_params_82540()
145 	nvm->ops.release	= e1000_release_nvm_generic;  in e1000_init_nvm_params_82540()
146 	nvm->ops.update		= e1000_update_nvm_checksum_generic;  in e1000_init_nvm_params_82540()
147 	nvm->ops.valid_led_default = e1000_valid_led_default_generic;  in e1000_init_nvm_params_82540()
148 	nvm->ops.validate	= e1000_validate_nvm_checksum_generic;  in e1000_init_nvm_params_82540()
149 	nvm->ops.write		= e1000_write_nvm_microwire;  in e1000_init_nvm_params_82540()
190 	mac->ops.get_bus_info = e1000_get_bus_info_pci_generic;  in e1000_init_mac_params_82540()
192 	mac->ops.set_lan_id = e1000_set_lan_id_multi_port_pci;  in e1000_init_mac_params_82540()
194 	mac->ops.reset_hw = e1000_reset_hw_82540;  in e1000_init_mac_params_82540()
196 	mac->ops.init_hw = e1000_init_hw_82540;  in e1000_init_mac_params_82540()
198 	mac->ops.setup_link = e1000_setup_link_generic;  in e1000_init_mac_params_82540()
200 	mac->ops.setup_physical_interface =  in e1000_init_mac_params_82540()
207 		mac->ops.check_for_link = e1000_check_for_copper_link_generic;  in e1000_init_mac_params_82540()
210 		mac->ops.check_for_link = e1000_check_for_fiber_link_generic;  in e1000_init_mac_params_82540()
213 		mac->ops.check_for_link = e1000_check_for_serdes_link_generic;  in e1000_init_mac_params_82540()
221 	mac->ops.get_link_up_info =  in e1000_init_mac_params_82540()
226 	mac->ops.update_mc_addr_list = e1000_update_mc_addr_list_generic;  in e1000_init_mac_params_82540()
228 	mac->ops.write_vfta = e1000_write_vfta_generic;  in e1000_init_mac_params_82540()
230 	mac->ops.clear_vfta = e1000_clear_vfta_generic;  in e1000_init_mac_params_82540()
232 	mac->ops.read_mac_addr = e1000_read_mac_addr_82540;  in e1000_init_mac_params_82540()
234 	mac->ops.id_led_init = e1000_id_led_init_generic;  in e1000_init_mac_params_82540()
236 	mac->ops.setup_led = e1000_setup_led_generic;  in e1000_init_mac_params_82540()
238 	mac->ops.cleanup_led = e1000_cleanup_led_generic;  in e1000_init_mac_params_82540()
240 	mac->ops.led_on = e1000_led_on_generic;  in e1000_init_mac_params_82540()
241 	mac->ops.led_off = e1000_led_off_generic;  in e1000_init_mac_params_82540()
243 	mac->ops.clear_hw_cntrs = e1000_clear_hw_cntrs_82540;  in e1000_init_mac_params_82540()
259 	hw->mac.ops.init_params = e1000_init_mac_params_82540;  in e1000_init_function_pointers_82540()
260 	hw->nvm.ops.init_params = e1000_init_nvm_params_82540;  in e1000_init_function_pointers_82540()
261 	hw->phy.ops.init_params = e1000_init_phy_params_82540;  in e1000_init_function_pointers_82540()
338 	ret_val = mac->ops.id_led_init(hw);  in e1000_init_hw_82540()
349 	mac->ops.clear_vfta(hw);  in e1000_init_hw_82540()
373 	ret_val = mac->ops.setup_link(hw);  in e1000_init_hw_82540()
430 		ret_val = hw->phy.ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL,  in e1000_setup_copper_link_82540()
435 		ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL,  in e1000_setup_copper_link_82540()
506 	ret_val = hw->nvm.ops.read(hw, NVM_SERDES_AMPLITUDE, 1, &nvm_data);  in e1000_adjust_serdes_amplitude_82540()
513 		ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_EXT_CTRL,  in e1000_adjust_serdes_amplitude_82540()
539 	ret_val = hw->phy.ops.read_reg(hw, M88E1000_PHY_PAGE_SELECT,  in e1000_set_vco_speed_82540()
544 	ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0005);  in e1000_set_vco_speed_82540()
548 	ret_val = hw->phy.ops.read_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);  in e1000_set_vco_speed_82540()
553 	ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);  in e1000_set_vco_speed_82540()
559 	ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0004);  in e1000_set_vco_speed_82540()
563 	ret_val = hw->phy.ops.read_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);  in e1000_set_vco_speed_82540()
568 	ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);  in e1000_set_vco_speed_82540()
572 	ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_PAGE_SELECT,  in e1000_set_vco_speed_82540()
598 	ret_val = hw->nvm.ops.read(hw, NVM_PHY_CLASS_WORD, 1, &nvm_data);  in e1000_set_phy_mode_82540()
605 		ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_PAGE_SELECT,  in e1000_set_phy_mode_82540()
611 		ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL,  in e1000_set_phy_mode_82540()
700 		ret_val = hw->nvm.ops.read(hw, offset, 1, &nvm_data);  in e1000_read_mac_addr_82540()