Lines Matching full:operating

368 If errors were detected, then the frame should not be sent to the operating
406 should deliver them to the rest of the operating system by calling
488 For devices operating at higher data rates, interrupt coalescing is an
566 needs to keep track of while it's operating:
584 operating system.
870 The following capabilities are still evolving in the operating system.
873 However, if such drivers are not present inside the core operating
902 or zones in play as the operating system will be able to use the
933 Implementing this capability will lead to the operating system being
946 This is then made available to the broader operating system and consumed
1127 100 Mbit/s Ethernet operating over multi-mode fiber.
1130 This is a general term that covers operating in one of the 100BASE-?X
1132 This is here because some PHYs do not distinguish between operating in
1134 If the driver can determine if it is operating with a BASE-T or fiber
1167 This form of 1 Gbit/s Ethernet is designed for operating over a backplane.
1174 1 Gbit/s Ethernet operating over a pair of multi-mode fibers, one for
1177 1 Gbit/s Ethernet operating over a pair of single-mode fibers, one for
1180 1 Gbit/s Ethernet operating over a single piece of single-mode fiber.
1190 2.5 Gbit/s Ethernet that is designed for operating over a backplane
1201 5.0 Gbit/s Ethernet that is designed for operating over a backplane
1205 10 Gbit/s Ethernet operating over four copper twisted pairs utilizing
1209 10 Gbit/s Ethernet operating over a pair of multi-mode fibers, one for
1213 10 Gbit/s Ethernet operating over a pair of single-mode fibers, one for
1218 10 Gbit/s Ethernet operating over a pair of single-mode fibers, one for
1223 10 Gbit/s Ethernet operating over a pair of multi-mode fibers, one for
1229 10 Gbit/s Ethernet operating over a single lane backplane.
1232 10 Gbit/s Ethernet operating over a group of four shielded copper cables.
1235 10 Gbit/s Ethernet operating over a four lane backplane.
1269 25 Gbit/s Ethernet operating over a pair of multi-mode fibers, one for
1273 25 Gbit/s Ethernet operating over a pair of single-mode fibers, one for
1278 25 Gbit/s Ethernet operating over a pair of single-mode fibers, one for
1283 25 Gbit/s Ethernet operating over a backplane with a single lane.
1286 25 Gbit/s Ethernet operating over a single lane of copper cable.
1306 each operating at 10 Gbit/s.
1311 operating at 10 Gbit/s.
1315 operating at 10 Gbit/s, with one fiber in the pair being used for
1347 40 Gbit/s signalling operating across four lanes that is defined for use
1351 40 Gbit/s signalling operating across four lanes that is designed to
1366 operating at 25 Gbit/s, with one fiber in the pair being used for
1384 50 Gbit/s Ethernet operating over a single lane backplane.
1387 50 Gbit/s Ethernet operating over a single lane twinaxial copper cable
1391 50 Gbit/s Ethernet operating over a pair of multi-mode fibers, one for
1395 50 Gbit/s Ethernet operating over a pair of single-mode fibers, one for
1400 50 Gbit/s Ethernet operating over a pair of single-mode fibers, one for
1405 50 Gbit/s Ethernet operating over a pair of single-mode fibers, one for
1418 100 Gbit/s Ethernet operating over ten lanes of shielded twinaxial
1419 copper cable, each operating at 10 Gbit/s.
1423 operating at 10 Gbit/s, with one fiber in the pair being used for
1427 each operating at 25 Gbit/s, with one fiber in the pair being used for
1476 each operating at 50 Gbit/s, with one fiber in the pair being used for
1480 100 Gbit/s Ethernet operating over a single lane copper backplane.
1483 100 Gbit/s Ethernet operating over a single lane copper twinaxial cable.
1487 100 Gbit/s Ethernet operating over a pair of multi-mode fibers, one for
1493 100 Gbit/s Ethernet operating over a pair of single-mode fibers, one for
1499 100 Gbit/s Ethernet operating over a pair of single-mode fibers, one for
1504 100 Gbit/s Ethernet operating over a pair of single-mode fibers, one for
1516 operating at 50 Gbit/s.
1520 each operating at 50 Gbit/s, with one fiber in the pair being used for
1525 each operating at 50 Gbit/s, with one fiber in the pair being used for
1550 200 Gbit/s signalling utilizing four lanes each operating at 50 Gbit/s.
1555 operating at 100 Gbit/s.
1564 each operating at 100 Gbit/s, with one fiber in the pair being used for
1568 200 Gbit/s signalling utilizing two lanes each operating at 100 Gbit/s.
1573 operating at 50 Gbit/s.
1597 400 Gbit/s signalling utilizing eight lanes each operating at 50 Gbit/s.
1602 operating at 100 Gbit/s.
1611 each operating at 100 Gbit/s, with one fiber in the pair being used for
1616 each operating at 100 Gbit/s, with one fiber in the pair being used for
1628 400 Gbit/s signalling utilizing four lanes each operating at 100 Gbit/s.
1654 When setting this property, if the device supports operating in the requested
2487 between DMA data, receive descriptors, and the operating system
2678 Rather, the device driver should always try to notify the operating system with