Lines Matching full:profile
17 \fBwificonfig\fR [\fB-R\fR \fIroot_path\fR] [\fB-i\fR \fIinterface\fR] connect profile
66 \fBwificonfig\fR [\fB-R\fR \fIroot_path\fR] createprofile profile
78 \fBwificonfig\fR [\fB-R\fR \fIroot_path\fR] showprofile [\fIprofile\fR]
83 \fBwificonfig\fR [\fB-R\fR \fIroot_path\fR] setprofilewepkey \fIprofile\fR 1|2|3|4
88 \fBwificonfig\fR [\fB-R\fR \fIroot_path\fR] getprofileparam \fIprofile\fR
110 \fBwificonfig\fR [\fB-R\fR \fIroot_path\fR] removeprefer \fIprofile\fR
115 \fBwificonfig\fR [\fB-R\fR \fIroot_path\fR] setprefer \fIprofile\fR [\fIn\fR]
138 operate on \fBWiFi\fR Configuration Profiles. A Configuration Profile allows
152 A Configuration Profile can be created for a \fBWLAN\fR by using the
193 \fBprofile\fR
196 The name of a \fBWiFi\fR profile. It can be a string between 1 and 32
199 profile name.
226 by the profile in the Preference list.
240 \fB\fBconnect\fR \fIprofile\fR[wait={\fIn\fR|\fIforever\fR}]\fR
248 Connects to a wireless network according to a pre-configured "profile". If the
249 specified Configuration Profile exists in /etc/inet/wifi, the \fBconnect\fR
250 subcommand uses that Configuration Profile to configure the interface. That
251 profile subsequently becomes the current active profile of the interface after
252 the \fBconnect\fR subcommand succeeds. If no existing Configuration Profile
255 parameter is set as "profile".
261 tries until the \fBNIC\fR is successfully connected to the profile or essid
265 whether or not a Configuration Profile was found for the specified name:
269 Connecting to profile <name>
310 profile. The \fBsetprofileparam\fR subcommand can be used to set and change
311 parameters in a profile that has already been created.
554 profile, the name of the network, the \fIbssid\fR, whether the network is
598 The following profile subcommands are supported:
602 \fB\fBcreateprofile\fR \fIprofile\fR [parameter=value] [...]\fR
606 Creates a Configuration Profile named \fIprofile\fR off-line. The specified
607 parameters are saved as items of this Configuration Profile. The user can
622 the specified Configuration Profile does not exist, this subcommand fails. The
632 \fB\fBshowprofile\fR [\fIprofile\fR]\fR
636 Displays the parameters in the Configuration Profile according to the specified
637 \fIprofile\fR. \fBWEP\fR (wired equivalent privacy) keys are not printed
638 because they are write-only parameters. If no \fIprofile\fR is specified, all
650 Profile "profile". Like the other \fBprofile\fR subcommands,
653 specified profile. In order for the modified profile to be applied to the
655 used after the profile has been updated.
658 the \fBsetwepkey\fR subcommand. For example, to update wepkey 2 in profile
676 \fB\fBgetprofileparam\fR \fIprofile\fR [parameter]\ [...]]\fR
680 \fB\fBsetprofileparam\fR \fIprofile\fR [parameter=value]\ [...]]\fR
684 Gets or sets parameters in the specified Configuration Profile "\fIprofile\fR".
685 Like the other profile subcommands, these subcommands do not affect the
687 currently running with the specified profile. In order for the modified
688 profile to be applied to the network interface, the \fBconnect\fR or
689 \fBautoconf\fR subcommands have to be used after the profile has been updated.
700 For example, to change the settings for the "\fIhome\fR" Configuration Profile,
742 \fB\fBremoveprefer\fR \fIprofile\fR\fR
756 \fB\fBsetprefer\fR \fIprofile\fR [\fIn\fR]\fR
760 Sets the position of a \fIprofile\fR in the Preference List. This may add or
761 change the position of a \fIprofile\fR in the Preference List. The valid values
764 \fIprofile\fR is moved lower on the list. If "\fIn\fR" is off the end of the
765 list, \fIprofile\fR is added to the end of the list. The Preference List can
820 A Configuration Profile can be created offline and then connected to the
821 network with the created Configuration Profile. The following series of
822 commands creates the Configuration Profile, displays the contents of that
823 profile, and connects to the network with the Configuration Profile:
846 A profile can be added to the Preference List and then used by the
847 \fBautoconf\fR subcommand. The following series of commands adds a profile
911 To search for a Configuration Profile with the name \fImyXXX\fR and configure
925 If the specified Configuration Profile does not exist, \fBwificonfig\fR
930 \fBExample 8 \fRDisplaying the Content of a Configuration Profile
933 To print the parameters of the previously Configured Profile named
969 active profile: [home]