Lines Matching full:router
8 6to4relay \- administer configuration for 6to4 relay router communication
33 The \fB6to4relay\fR command is used to configure 6to4 relay router
34 communication. Relay router communication support is enabled by setting the
39 for relay router communication is disabled. Otherwise, support is enabled, and
48 relay router's \fBunicast\fR address instead of the default \fBanycast\fR
50 policy for receiving traffic from relay routers. The source relay router on a
51 received packet is non-deterministic, since a different relay router may be
77 Enable support for relay router. Use \fB-a\fR \fIaddr\fR if it is specified.
87 Disable support for the relay router.
109 A specific relay router's unicast address. \fIaddr\fR must be specified as a
132 If 6to4 relay router communication is disabled, the administrator will see the
138 6to4relay: 6to4 Relay Router communication support is disabled.
145 If 6to4 router communication is enabled, the user will see this message:
149 6to4relay: 6to4 Relay Router communication support is enabled.
150 IPv4 destination address of Relay Router = 192.88.99.1