Lines Matching refs:use
138 # search of the termcap form even if you don't use reorder). Minor sections
175 # Entries with embedded plus signs are designed to be included through use/tc
195 # capabilities for use by applications, <u0>...<u9>. In this file, we use
233 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
255 # of heaviest use, popularity, and interesting features.
305 gn, use=dumb,
336 # implementing some ANSI subset can use many of them.
341 cuu=\E[%p1%dA, use=ansi+local1,
345 it#8, use=ansi+tabs,
357 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
374 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
378 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
385 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
403 use=klone+acs,
409 use=klone+sgr,
420 use=klone+acs,
448 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
478 cols#80, lines#24, use=vanilla, use=ansi+erase,
479 use=ansi+local1,
485 cols#80, lines#24, use=vanilla, use=ansi+cup,
486 use=ansi+erase,
491 ht=^I, use=ansi+local1, use=ansi-mini,
534 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
550 use=klone+sgr-dumb,
552 lines#25, use=pcansi-m,
554 lines#33, use=pcansi-m,
556 lines#43, use=pcansi-m,
559 use=klone+color, use=pcansi-m,
561 lines#25, use=pcansi,
563 lines#33, use=pcansi,
565 lines#43, use=pcansi,
581 vpa=\E[%i%p1%dd, use=pcansi-m,
591 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
602 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
603 use=ansi+rca, use=ansi+erase, use=ansi+tabs,
604 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
605 use=ansi+sgrbold, use=ansi+arrows,
623 u7=\E[6n, use=klone+color, use=klone+sgr8,
659 use=ansi.sys-old,
678 use=ansi.sys,
684 use=ansi.sys,
690 use=ansi.sysk,
706 use=tw52-m,
713 smso=\EyQ, smul=\EyH, use=at-m,
715 lines#30, use=at-color,
724 use=st52,
816 use=vt220,
880 # * This has to use a key slot which is unfortunate (any unused one will *
912 vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
913 use=ecma+color,
917 setab@, setaf@, setb@, setf@, use=linux,
927 oc=\E]R, use=linux-basic,
932 oc=\E]R, use=linux-basic,
934 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
939 cvvis=\E[?25h\E[?8c, use=linux-c-nc,
948 sgr0=\E[m\017, smacs=^N, use=linux2.2,
952 E3=\E[3;J, use=linux2.6,
955 use=linux3.0,
964 bce@, use=linux2.6,
968 ich@, ich1@, use=linux,
974 use=linux, use=klone+koi8acs,
979 use=linux, use=klone+koi8acs,
984 use=linux,
992 smpch@, use=linux,
1008 use=linux,
1012 # you use a 512-character console font. This uses bold for bright
1018 use=linux,
1064 rmul=\E[0m, smul=\E[1m, use=mach,
1068 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
1088 # hurd doesn't use ^J for scrolling, because this could put things into the
1165 # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
1206 use=scoansi-old,
1209 use=scoansi-old,
1236 tbc=\E[3g, vpa=\E[%i%p1%dd, use=klone+color,
1254 # I have a UNIX PC which I use as a terminal attached to my Linux PC.
1279 # have the full documentation and several programs which use tam. It also
1286 # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
1306 # location because the UNIX PC has dynamically reloadable fonts. I use font
1317 # applications can now use the F1-F8 keys.
1345 # * this or other fonts in /usr/lib/wfont, use the command
1454 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
1464 sitm=\E[3m, use=vt100+enq, use=klone+color,
1465 use=iris-ansi-ap,
1501 kpp=\E[Z, use=klone+acs, use=klone+sgr8,
1570 crxm, use=qnx4,
1577 smicm=\E/>2h, use=qnx4,
1580 xvpa, use=qnxm,
1590 scp@, use=qnx4,
1598 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
1651 daisy, xhpa, use=qansi-g,
1654 crxm, use=qansi,
1661 smicm=\E[>2h, use=qansi,
1664 xvpa, use=qansi-m,
1672 # Then I dropped all the pseudo-HP entries. we don't want and can't use
1708 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1711 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1714 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1717 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1720 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1723 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1730 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1733 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1736 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1739 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1742 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1745 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1754 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
1755 use=ecma+color,
1757 # Terminfo entries to enable the use of the ncurses library in colour on a
1783 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
1784 use=klone+color,
1787 cols#132, lines#50, use=arm100,
1794 kclr=\E[9~, khlp=\E[28~, use=vt220,
1829 # work. Don't use it on a VMS system -TD
1837 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
1840 km, use=wsvt25,
1845 use=sun-il,
1850 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
1897 # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
1935 use=cons25w,
1937 kbs=\177, kdch1=\E[3~, use=cons25,
1942 smul=\E[4m, use=cons25,
1944 lines#30, use=cons25,
1946 lines#30, use=cons25-m,
1948 lines#43, use=cons25,
1950 lines#43, use=cons25-m,
1952 lines#50, use=cons25,
1954 lines#50, use=cons25-m,
1956 lines#60, use=cons25,
1958 lines#60, use=cons25-m,
1961 use=cons25w,
1966 smul=\E[4m, use=cons25r,
1968 lines#50, use=cons25r,
1970 lines#50, use=cons25r-m,
1972 lines#60, use=cons25r,
1974 lines#60, use=cons25r-m,
1978 use=cons25w,
1983 smul=\E[4m, use=cons25l1,
1985 lines#50, use=cons25l1,
1987 lines#50, use=cons25l1-m,
1989 lines#60, use=cons25l1,
1991 lines#60, use=cons25l1-m,
2024 # "stty rows NN", e.g. to use 24 lines.
2029 use=bsdos-pc-nobold,
2032 use=klone+color, use=bsdos-pc-m,
2045 use=klone+sgr8,
2049 use=bsdos-pc-nobold,
2051 use=bsdos-pc,
2055 use=sun,
2059 use=bsdos-pc,
2108 # those left alive. To capture these, use one of the VT102 entries.
2121 # that you set auto-nl to "on", if you set it off use vt100-nam
2203 use=vt100+keypad,
2206 kf9=\EOw, use=vt100+pfkeys,
2210 # use the 5-key arrangement to model the arrow keys as suggested in the
2235 u8=\E[?1;2c, use=ansi+enq,
2237 u8=\E[?6c, use=ansi+enq,
2292 use=vt100+fnkeys,
2294 am@, xenl@, use=vt100-am,
2296 bel@, flash=\E[?5h\E[?5l, use=vt100,
2301 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
2304 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
2310 smul@, use=vt100,
2312 cols#132, lines#14, use=vt100-nav,
2316 vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
2322 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
2326 vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
2330 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
2333 # This entry (or vt102-nsgr) is probably the right thing to use for
2337 use=vt100,
2340 rs3=\E[?3h, use=vt102,
2350 vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
2351 sgr@, sgr0=\E[m, use=vt102,
2357 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
2387 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
2450 rs3=\E[?3h, use=vt220,
2491 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
2495 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2501 # escapes or 2> put the vt220 into vt100 mode and use all the nifty
2505 # you can use the escape key in emacs and everything else which needs it.
2507 # You probably don't want to use this on a VMS machine since VMS will think
2529 # use=vt220,
2531 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
2535 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2540 # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
2542 # Things that use <knxt> usually use tab anyways... and things that don't use
2543 # tab usually use <knxt> instead...
2580 tsl=\E[1$}\E[H\E[K, use=vt220+keypad,
2585 use=vt320,
2591 use=vt320,
2596 use=vt320-w,
2751 use=vt420,
2758 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
2767 use=vt420,
2770 use=vt420,
2772 use=vt420pc,
2774 use=vt420pcdos,
2850 use=vt100,
2854 am@, use=vt220,
2867 use=vt320-w,
2872 use=z340,
2878 hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
2939 tbc=\E[3g, tsl=\E]0;, vpa=\E[%i%p1%dd, use=vt102+enq,
2942 use=vt100,
2945 initc@, use=xterm+256color, use=putty,
2952 kf9=\EOX, use=putty,
3010 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
3011 use=klone+color, use=vt100,
3030 kmous=\E[M, use=teraterm2.3,
3033 use=teraterm4.59,
3040 # for casual (occasional) use. Also fails several of the vttest screens,
3048 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
3059 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
3060 use=ms-vt100,
3092 knp=\E/, kpp=\E?, use=ms-vt100-color,
3095 use=ms-vt100+,
3166 smul=\E[4m, tbc=\E[3g, use=vt100+enq,
3170 # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
3197 use=vt100+enq,
3232 tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
3233 use=ecma+color, use=vt220+keypad,
3238 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
3242 # xterm to use terminfo-based descriptions with the titeInhibit resource.
3251 smcup=\E[?1048h\E[?1047h, use=xterm-xf86-v33,
3271 smcup=\E[?1049h, use=xterm-xf86-v333,
3279 use=xterm-xf86-v40,
3284 rin=\E[%p1%dT, use=xterm-xf86-v43,
3287 use=xterm-xf86-v44,
3293 rin=\E[%p1%dT, use=xterm+pcfkeys, use=xterm+tmux,
3294 use=xterm-basic,
3312 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
3313 use=xterm+pce2,
3325 # the earlier scheme, as noted in the "use=" clauses in this file.
3433 use=xterm+edit,
3437 use=xterm+pc+edit,
3446 # Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
3456 kf63=\E[13;4~, use=xterm+pcf2,
3484 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
3489 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
3497 use=ibm+16color, use=xterm-new,
3519 # capability. So it is cancelled in the entries which use this and/or the
3526 colors#88, pairs#7744, use=xterm+256color,
3530 use=xterm+256color, use=xterm-new,
3532 use=xterm+88color, use=xterm-256color,
3538 XM=\E[?1002%?%p1%{1}%=%th%el%;, use=xterm-new,
3540 XM=\E[?1003%?%p1%{1}%=%th%el%;, use=xterm-new,
3566 # To use it, your decTerminalID resource must be set to 200 or above.
3617 knp=\ES, kpp=\ET, use=xterm-basic,
3632 use=xterm-basic,
3650 use=xterm+app, use=xterm+edit, use=xterm-basic,
3651 use=vt220+keypad,
3662 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
3663 use=xterm,
3666 lines#24, use=xterm-old,
3670 use=xterm-new,
3675 U8#1, use=xterm,
3684 dsl=\E]0;\007, fsl=^G, tsl=\E]0;, use=xterm,
3688 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, use=xterm,
3695 smso=\E[7m, smul=\E[1m, use=xterm-old,
3699 ich@, ich1@, use=xterm,
3702 rmcup@, smcup@, use=xterm,
3708 # (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
3719 tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
3721 ncv@, use=kterm, use=ecma+color,
3748 smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
3755 use=xtermm,
3764 smul=\E[4m\E[42m, use=xterm+sl, use=xterm-r6,
3796 smul=\E[4m, use=ecma+color, use=vt220+keypad,
3810 op=\E[m, use=xterm-r6, use=klone+color,
3833 use=xterm-basic,
3835 cols#80, lines#24, use=xterm-sun,
3842 use=xterm-color,
3867 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color,
3885 kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
3894 vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
3895 use=gnome-rh80,
3902 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
3913 use=xterm+pcc2, use=gnome-fc5,
3915 use=vte-2007,
3925 use=vte+pcfkeys, use=vte-2007,
3927 use=vte-2008,
3929 # GNOME terminal may automatically use the contents of the "xterm" terminfo to
3931 # this list is built into the program (which addresses the inadvertant use of
3952 use=xterm+pcfkeys,
3954 use=vte+pcfkeys,
3957 use=vte-2008,
3959 use=vte,
3963 initc@, use=xterm+256color, use=vte,
3965 use=vte-256color,
3974 use=vte,
3979 # This does not use VTE, and does have different behavior (compare xfce and
3982 indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333,
3989 kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color,
4041 use=ecma+color, use=xterm-r6,
4047 use=konsole-base,
4049 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
4053 kend=\E[4~, khome=\E[1~, use=konsole-vt100,
4057 kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
4058 use=konsole-vt100,
4061 kLFT@, kRIT@, kcbt=\E[Z, kind@, kri@, kDN@, kUP@, use=xterm+pcc2,
4062 use=xterm+pcf0,
4070 khome=\E[H, use=konsole-base,
4072 kbs=^H, kdch1=\177, use=konsole-vt100,
4074 ncv#32, use=ibm+16color, use=konsole,
4077 use=konsole-xf4x,
4081 initc@, use=xterm+256color, use=konsole,
4130 vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2,
4134 # (when available), it could use the extended names introduced for xterm.
4147 use=xterm+256color, use=rxvt,
4193 smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
4194 use=rxvt+pcfkeys, use=vt220+keypad,
4199 # For the keypad, use Shift to temporarily override Application-Keypad
4200 # setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
4300 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
4302 use=rxvt,
4304 use=xterm+256color, use=rxvt,
4306 use=xterm+88color, use=rxvt,
4308 use=rxvt,
4311 use=rxvt,
4314 use=rxvt-cygwin,
4319 ncv#32, use=ibm+16color, use=rxvt,
4333 kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
4334 use=rxvt,
4337 use=xterm+256color, use=mrxvt,
4376 vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
4377 use=ecma+color,
4380 use=xterm+256color, use=Eterm,
4383 use=xterm+88color, use=Eterm,
4389 kbs=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
4398 kbs=\177, kdch1=\E[3~, use=klone+color, use=xterm-r6,
4432 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
4507 # does not use padding, of course.
4530 tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
4645 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
4651 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
4658 # ncurses to use "st" as its name. Proper fix for that is to use "st" as an
4694 use=ibm+16color, use=simpleterm,
4699 initc@, use=simpleterm, use=xterm+256color,
4736 # c) modified smacs/rmacs to use SCS rather than SI/SO
4787 cols#79, use=cbunix,
4791 smso=\Ea$, smul=\Ea!, use=cbunix,
4828 # Entries for use by the `screen' program by Juergen Weigert,
4867 S0=\E(%p1%c, use=ecma+color,
4872 ech@, use=screen,
4874 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
4885 use=ibm+16color, use=screen,
4888 use=ibm+16color, use=screen-s,
4891 use=ibm+16color, use=screen-bce,
4894 bce, use=ibm+16color, use=screen-s,
4901 initc@, use=xterm+256color, use=screen,
4905 initc@, use=xterm+256color, use=screen-s,
4909 initc@, use=xterm+256color, use=screen-bce,
4913 initc@, use=xterm+256color, use=screen-s,
4938 # necessary to override the "use=" clause's values (screen+fkeys).
4952 use=screen+fkeys, use=xterm-new,
4956 bw, use=screen+fkeys, use=xterm-r6,
4962 use=screen+fkeys, use=screen,
4967 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
4968 use=rxvt+pcfkeys, use=vt220+keypad, use=screen,
4970 use=screen+fkeys, use=Eterm,
4972 use=screen+fkeys, use=mrxvt,
4974 use=screen+fkeys, use=vte,
4976 use=screen+fkeys, use=gnome,
4978 use=screen+fkeys, use=konsole,
4982 kbs=\177, kcbt@, use=screen+fkeys, use=screen,
4984 use=screen+fkeys, use=mlterm,
4991 # If you are using only terminals which support bce, then you can use this
5001 ech@, use=screen.xterm-new,
5004 ech@, use=screen.rxvt,
5007 ech@, use=screen.Eterm,
5010 ech@, use=screen.mrxvt,
5013 ech@, use=screen.gnome,
5016 ech@, use=screen.konsole,
5019 ech@, use=screen.linux,
5022 ech@, use=screen.mlterm,
5025 cols#132, use=screen,
5067 # use VT wrap mode ON
5068 # use Emacs arrow keys OFF
5089 # sequences for setting the window-title. So you must use tsl and fsl in
5118 u8=\E[?62;1;6c, use=ansi+enq,
5120 use=ncsa-m, use=klone+color,
5123 dsl@, fsl@, tsl@, use=ncsa,
5126 dsl@, fsl@, tsl@, use=ncsa-m,
5129 # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
5138 kf8=\E[19~, kf9=\E[20~, use=ncsa,
5172 home=\EH, use=elks-glasstty,
5177 rmso=\E[m, smso=\E[7m, use=elks-glasstty,
5183 use=elks-vt52,
5189 cols#61, it#8, lines#20, use=elks-vt52,
5244 il@, il1@, use=sun-il,
5245 # If you are using an SS5, change the sun definition to use sun-ss5.
5247 use=sun-il,
5252 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
5255 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
5257 cols#80, lines#48, use=sun,
5259 cols#80, lines#34, use=sun,
5261 cols#80, lines#24, use=sun,
5263 cols#80, lines#17, use=sun,
5265 cols#80, lines#12, use=sun,
5269 dsl=^L, fsl=\E[K, tsl=^M, use=sun,
5271 ich1@, rmir@, smir@, use=sun,
5274 rmcup=\E[>4h, smcup=\E[>4l, use=sun,
5277 kcuu1=\E[215z, use=sun-il,
5309 smso=\E[7m, rmso=\E[27m, smul=\E[4m, rmul=\E[24m, use=sun,
5354 cols#96, lines#48, use=psterm,
5356 cols#90, lines#28, use=psterm,
5358 cols#80, lines#24, use=psterm,
5359 # This is a faster termcap for psterm. Warning: if you use this termcap,
5414 lines#29, use=news-unk,
5417 use=news-29,
5420 use=news-29,
5424 lines#33, use=news-unk,
5427 use=news-33,
5430 use=news-33,
5434 lines#42, use=news-unk,
5437 use=news-42,
5440 use=news-42,
5463 use=news-old-unk,
5469 use=news-old-unk,
5476 use=news-old-unk,
5483 use=news-old-unk,
5491 use=news-old-unk,
5498 use=news-old-unk,
5505 use=news-old-unk,
5511 use=news-old-unk,
5533 tsl=\E[1$}\E[;%df, use=vt200,
5541 tsl=\E[1$}\E[;%df, use=vt200,
5574 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color,
5587 bel=^G, use=ansi.sys,
5608 u9=\E[c, use=emx-base,
5614 smul=\E[1;36;44m, use=ansi-emx,
5620 smul=\E[0;36;40m, use=ansi-emx,
5643 use=ansi.sys,
5721 vpa=\E[%i%p1%dd, use=vt102+enq,
5755 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq,
5958 # To use this, you need to a bunch of environment variables:
6047 lines#35, use=opennt,
6050 lines#50, use=opennt,
6053 lines#60, use=opennt,
6056 lines#100, use=opennt,
6060 cols#125, use=opennt,
6063 lines#35, use=opennt-w,
6066 lines#50, use=opennt-w,
6069 lines#60, use=opennt-w,
6072 cols#132, use=opennt,
6076 rmcup@, smcup@, use=opennt,
6079 lines#35, use=opennt-nti,
6082 lines#50, use=opennt-nti,
6085 lines#60, use=opennt-nti,
6088 lines#100, use=opennt-nti,
6144 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
6146 use=wy50,
6156 # <invis> imported by use=adm+sgr may work, let me know. -- esr)
6174 rmir=\Er, smir=\Eq, use=adm+sgr,
6176 kend=\ET, use=altos7,
6205 lines#16, use=hpgeneric,
6215 # The hp2621s use the same keys for the arrows and function keys,
6217 # user to use those keys as arrow keys rather than as function
6247 # function keys), use 2621-nl or 2621-wl.
6254 # sequence, we don't use it in the default.
6255 # If you like, you can use 2621-ba (brain-damaged arrow keys).
6257 rmkx@, smkx@, use=hp+arrows, use=hp2621,
6263 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
6270 use=hp+pfk+cr, use=hpgeneric,
6272 # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
6274 mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
6277 use=hp+pfk+arrows, use=hp2621p,
6282 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
6288 use=hp2621,
6293 use=hp2621-fl,
6299 ht@, use=hp2621,
6334 use=hp+labels, use=scrhp,
6336 # This hp2626 entry does not use any of the fancy windowing stuff
6340 # any window clears memory, it is probably not possible to use
6357 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk+cr,
6358 use=hp+labels, use=scrhp,
6361 # a 115 line workspace for regular use, and a 1 line window for
6376 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
6380 use=hp2626,
6383 lines#12, use=hp2626,
6385 cols#40, lines#12, use=hp2626,
6387 cols#40, use=hp2626,
6389 lines#11, use=hp2626-s,
6398 smul=\E&dD\E&v1S, use=hp2621-nl,
6404 use=hp2621-nl,
6408 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=hp2627a,
6414 cup@, rmkx@, smkx@, use=hp2645,
6417 rmkx@, smkx@, use=hp2645,
6443 sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
6444 # You should use this terminal at 4800 baud or less.
6447 dch1=\EP$<7>, ip=$<5>, use=hp2645,
6453 OTbs, use=hp2622,
6465 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
6468 use=hp+pfk+arrows, use=hp2621-fl,
6477 use=hp+pfk-cr,
6493 tbc=\E3, use=newhpkeyboard,
6500 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
6507 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
6529 smln=\E&jB, use=hp2621,
6532 use=hp+printer, use=hp2621b,
6537 use=newhpkeyboard, use=hp2621b,
6540 use=hp+printer, use=hp2621b-kx,
6558 is2=\E&dj@\r, use=hp+pfk+cr, use=hp+labels, use=scrhp,
6562 use=hp2622,
6565 use=hp+printer, use=hp2624,
6569 lm#240, use=hp2624,
6572 lm#240, use=hp2624b-p,
6584 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
6626 use=hpsub,
6651 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
6783 lines#94, use=gator,
6796 cols#128, lines#47, use=vt52,
6798 lines#94, use=gator-52,
6820 use=dku7003-dumb,
6874 kbs=^H, use=adm3a,
6879 rmso=\EG, smso=\EG, use=adm3a+,
6880 # A lot of terminals other than adm11s use these. Wherever you see
6881 # use=adm+sgr with some of its capabilities disabled, try the
6903 use=adm+sgr,
6916 # While in supervisor setup you can also use following codes:
6920 # Ctrl-T tabs 1-80 use left&right to move and up to set and
6935 # The following null-modem cable should fix this and enable you to use
6936 # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
6959 use=adm+sgr,
6973 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, use=adm+sgr,
6974 use=adm3a,
7130 # OFF. If there is no such switch, you have an old adm31 and must use oadm31.
7143 rmul@, smso=\EG4, smul@, use=adm31,
7150 use=vt100,
7160 smir=\Eq, smul@, use=adm+sgr,
7169 smir=\Eq\EF \011, use=adm42,
7213 cup=\E[%i%p1%d;%p2%dH, use=pt100,
7215 rmso@, smso@, use=pt100,
7217 rmso@, smso@, use=pt100w,
7244 # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
7254 xmc#1, use=qvt101+,
7274 smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
7276 cnorm=\E., use=qvt101,
7297 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
7310 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
7312 lines#25, use=qvt119+,
7315 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
7317 lines#25, use=qvt119+,
7322 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
7325 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
7334 is2=\E[=40h\E[?3l, use=qvt203,
7337 rs2=\E[?3h\E[=40h, use=qvt203,
7355 clear=\E*$<10>, use=tvi950,
7449 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
7484 ll=\E=7\s, use=tvi910,
7504 cup@, use=tvi912c,
7546 # and how you'd like to use the terminal:
7586 # If you want to use the FUNCT key on a tvi912[bc], use the
7644 # (On Rev E or lower, use W25 instead of switch 10.)
7713 # useful in block mode.) The descriptions in this file don't use any
7726 # enabled in <is2>, but auto-flip is very jarring so we don't use it.
7807 bel=\EK$<100>\EK, use=tvi912b+2p,
7821 use=tvi912b+2p, use=tvi912b-unk,
7824 use=tvi912b+vb, use=tvi912b-unk,
7827 use=tvi912b+printer, use=tvi912b-unk,
7830 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
7833 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
7836 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
7839 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
7842 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
7845 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
7848 use=tvi912b+dim, use=tvi912b-unk,
7851 use=tvi912b+mc, use=tvi912b-unk,
7854 use=tvi920b+fn, use=tvi912b-unk,
7857 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
7860 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
7863 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
7866 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
7867 use=tvi912b-unk,
7870 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
7871 use=tvi912b-unk,
7874 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
7875 use=tvi912b-unk,
7878 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
7879 use=tvi912b-unk,
7882 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
7883 use=tvi912b-unk,
7886 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
7887 use=tvi912b-unk,
7890 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
7893 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
7910 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
7925 nel=^M^J, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
7930 kil1=\EE$<2*/>, use=tvi92B,
7954 use=adm+sgr,
8101 tsl=\Eh\Ef, use=adm+sgr,
8106 kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925,
8203 # should be present and all tvi native modes use the same string for this.
8221 use=adm+sgr,
8238 smkx=\El, use=tvi950,
8252 smkx=\El, use=tvi950,
8262 use=tvi950,
8269 smkx=\El, use=tvi950,
8276 smkx=\El, use=tvi950,
8298 use=tvi950,
8301 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
8302 # use half-intensity as normal mode, full intensity as <bold>
8305 sgr0=\EG0\E[=5h, use=tvi955,
8330 use=tvi970,
8333 use=tvi970,
8337 # <smul> strings are klutzy, but at least use no screen space.
8339 # its absence means <smam>=\Ev isn't safe to use. -- esr)
8472 # to use vi200-f.
8477 use=vi200,
8479 cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
8504 use=vi300,
8534 clear=\030\E[H\E[2J, use=vi300,
8545 use=vt100,
8613 smso=\EG4, use=wy30, use=adm+sgr,
8619 bel@, use=wy30,
8669 smso=\EGt, use=wy50, use=adm+sgr,
8671 bel@, use=wy50,
8675 use=wy50,
8677 bel@, use=wy50-w,
8727 smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
8729 bel@, use=wy350,
8733 use=wy350,
8735 bel@, use=wy350-w,
8749 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
8785 tbc=\E0, tsl=\EF, use=adm+sgr,
8790 rs2=\E`;$<70>, use=wy120,
8794 pln@, rs3=\EwG\Ee)$<100>, use=wy120,
8798 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
8801 bel@, use=wy120,
8804 bel@, use=wy120-w,
8834 # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
8865 tbc=\E0, tsl=\EF, use=adm+sgr,
8870 rs2=\EeF$<150>\E`;$<150>, use=wy60,
8874 pln@, rs3=\EwG\Ee)$<200>, use=wy60,
8877 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
8884 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
8889 nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
8893 pln@, rs3=\Ee+$<150>, use=wy60-42,
8896 pln@, rs3=\Ee+$<150>, use=wy60-42-w,
8899 bel@, use=wy60,
8901 bel@, use=wy60-w,
8913 # then set msgr, else use msgr@.
8924 u0=\E~>\E8, u1=\E[42h, use=wy60,
8930 use=wy99gt,
8934 pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
8938 pln@, rs2=\E`;$<150>, use=wy99gt-w,
8941 bel@, use=wy99gt,
8944 bel@, use=wy99gt-w,
8994 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
9002 # speeds handshaking is needed even for character sending. If you use
9003 # DTR handshaking, you can use even greater speeds.
9034 hts=\E1, tbc=\E0, use=wy99f,
9055 # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
9085 tbc=\E0, tsl=\EF, use=adm+sgr,
9090 rs2=\EeF$<150>\E`;$<150>, use=wy160,
9094 pln@, rs3=\EwG\Ee)$<200>, use=wy160,
9097 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
9103 rs3=\Ee*$<150>, use=wy160,
9107 rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
9111 pln@, rs3=\Ee+$<150>, use=wy160-42,
9114 pln@, rs3=\Ee+$<150>, use=wy160-42-w,
9117 bel@, use=wy160,
9119 bel@, use=wy160-w,
9165 tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad,
9177 use=wy75,
9180 bel@, use=wy75,
9183 rs2=\E[35h\E[?3h$<80>, use=wy75,
9186 bel@, use=wy75-w,
9232 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad,
9236 bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85,
9241 rs2=\E[35h\E[?3h$<70>, use=wy85,
9245 bel@, use=wy85-w,
9338 use=vt220+keypad,
9344 use=wy185,
9348 bel@, use=wy185,
9354 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
9358 bel@, use=wy185-w,
9393 tsl=\EF, use=adm+sgr,
9399 bel@, use=wy325,
9407 rs2=\E`;$<70>, use=wy325,
9413 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
9419 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
9424 bel@, use=wy325-w,
9431 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
9437 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
9442 bel@, use=wy325-w,
9448 pln@, use=wy325,
9454 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
9459 bel@, use=wy325-w,
9524 knp=\E[U, kpp=\E[V, use=wy370-nk,
9536 use=wy370-nk, use=vt220+keypad,
9545 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
9549 bel@, use=wy370,
9554 rs2=\E[35h\E[?3h$<70>, use=wy370,
9558 flash=\E[30h\E\,\E[30l$<300>, use=wy370-w,
9560 rs3=\E[32h\E[?5h, use=wy370,
9579 home=^]8`g @\037, use=wy99gt-tek,
9657 vpa=\E[%i%p1%dd, use=vt220+keypad,
9663 use=wy520,
9667 flash=\E[30h\E\,\E[30l$<100>, use=wy520,
9673 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
9677 flash=\E[30h\E\,\E[30l$<100>, use=wy520-w,
9692 use=wy520,
9699 use=wy520-epc,
9703 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc,
9709 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
9713 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc-w,
9720 use=wy520,
9727 use=wy520,
9734 use=wy520-36,
9741 use=wy520-48,
9749 use=wy520-epc,
9756 use=wy520-epc,
9763 use=wy520-36pc,
9770 use=wy520-48pc,
9790 use=wy75,
9800 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
9822 use=kermit,
9832 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
9834 # Cannot use line 25, now acts funny like ansi special scrolling region.
9836 # Cannot use character insert because 1.20 goes crazy if insert at col 80.
9837 # Does not use :am: because autowrap is lost when kermit dropped and restarted.
9844 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
9847 # Cannot use line 25, now acts funny like ansi special scrolling region.
9849 # Does not use am: because autowrap is lost when kermit dropped and restarted.
9869 use=msk227,
9881 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
9995 # tell ncurses that the corresponding highlights exist; it should use <sgr>,
10010 use=klone+acs,
10013 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
10017 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
10044 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
10049 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
10067 # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
10083 cols#20, lines#4, use=MtxOrb,
10085 cols#16, lines#2, use=MtxOrb,
10091 # discontinued, but known to be still in use or represented by emulations.
10123 mc0@, mc4@, mc5@, use=att2300,
10160 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
10165 use=att5410v1,
10169 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
10191 use=vt100+fnkeys,
10215 # We use \212 to program the ^J because a bare ^J will get translated by
10256 use=att4410,
10260 is1=\E[?3h$<100>, use=att4415,
10263 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
10268 use=att4415,
10279 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
10280 use=att4415,
10283 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
10284 use=att4415-rv,
10287 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
10288 use=att4415-w,
10291 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
10292 use=att4415-w-rv,
10329 use=att5420_2,
10351 is1=\E[?3h, use=att5418,
10401 use=att4424,
10465 smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
10469 is1=\E[?3h$<100>, use=tty5425,
10642 # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10661 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10682 lines#24, use=att5620,
10684 lines#34, use=att5620,
10739 xonc=e, use=att605,
10743 use=att605,
10780 use=att610,
10795 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
10799 use=att610-103k,
10807 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
10815 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
10817 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
10819 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
10862 use=att620,
10879 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
10884 use=att620-103k,
10894 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10918 lines#24, use=att630,
10943 # Note: Most terminals, especially the 600 family use Reverse Video for
11089 lines#41, use=att730,
11091 lines#24, use=att730,
11095 use=att730,
11097 lines#41, use=att730r,
11099 lines#24, use=att730r,
11289 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
11291 lines#22, use=att505,
11296 # cleanly and compiled in sections -- no `use' references cross this cut
11333 kbs=^_, use=ampex175,
11348 tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
11371 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
11383 kf9=^AI\r, khome=^^, use=adm+sgr,
11387 is2=\E\034Eg\El, use=ampex232,
11542 aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
11587 use=aaa+unk,
11589 use=aaa+rv, use=aaa-18,
11594 use=aaa+unk,
11599 use=aaa+unk,
11604 use=aaa+unk,
11606 use=aaa+rv, use=aaa-24,
11611 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
11616 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
11624 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
11626 use=aaa+rv, use=aaa-30-s,
11629 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
11632 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
11637 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
11639 use=aaa+rv, use=aaa-30,
11642 use=aaa-30,
11645 use=aaa+rv, use=aaa-30,
11650 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
11652 use=aaa+rv, use=aaa-36,
11657 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
11659 use=aaa+rv, use=aaa-40,
11664 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
11666 use=aaa+rv, use=aaa-48,
11672 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
11674 use=aaa+rv, use=aaa-60-s,
11676 use=aaa+dec, use=aaa+rv, use=aaa-60-s,
11680 use=aaa+unk,
11682 use=aaa+rv, use=aaa-60,
11685 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
11691 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
11695 use=guru+rv, use=guru-33,
11702 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
11706 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11710 use=guru+unk,
11714 use=guru+unk,
11718 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11722 use=guru+unk,
11726 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11730 use=guru+unk,
11734 use=guru+unk,
11738 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11742 use=guru+unk,
11787 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
11790 use=regent,
11793 use=regent20,
11800 smul=\E0`, use=regent25,
11802 is2=\EB, use=regent40,
11806 use=regent40+,
11820 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
11889 use=regent40,
11979 # There is no need to use the initialization string is=... (by invoking
12015 use=cit101e,
12018 kbs=^H, kcub1=^H, kcud1=^J, use=cit101e,
12023 use=cit101e,
12032 # by the "reset", "tset", or "tabs" utilities. No delays are specified; use
12063 smul=\EX, use=lpr,
12065 is1=\EN, use=citoh,
12070 use=citoh,
12075 use=citoh,
12079 is1=\EP, use=citoh,
12081 is3=\EA, use=citoh,
12084 is3=\EB, use=citoh,
12259 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
12270 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
12273 use=c108-rv-4p,
12276 use=c108-4p,
12280 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
12288 # To get out of the one page window, we use a clever trick:
12295 # Some tty drivers use cr3 for concept, others use nl3, hence
12303 # Note: can't use function keys f7-f10 because they are
12305 # clear eol use xon/xoff so they probably won't work very well.
12345 smso=\EE, use=c100,
12348 is3@, use=c100,
12361 # dsl: Go to window 2, go to the beginning of the line, use a line feed to
12411 # \E[2+x set meta key to use high bit
12415 # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
12427 # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
12430 # rmul: Could use \E[4!{ to turn off only underline (leaving any other
12512 # programs) assume that by defining flash=, you want the computer to use it
12522 # but screen scroll functions are destructive and do not make use of it.
12587 # and mc5= should use the \E[?4i and \E[?5i strings instead).
12658 use=avt-ns,
12661 use=avt-ns,
12664 smcup=\E[H\E[1;24;1;132w, use=avt-ns,
12669 # 191 lines of memory and 24 screen lines for regular use.
12682 use=avt+s, use=avt-ns,
12685 use=avt+s, use=avt-ns,
12688 use=avt+s, use=avt-ns,
12691 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
12711 use=contel300,
12732 # This description must use the NON-DEFAULT native keyboard language.
12807 # Data General color terminals use the "Tektronix" color model. The total
12826 use=dgunix+fixed,
12846 use=dg+color8,
12860 use=dgmode+color8,
12889 smul=^T, use=dgkeys+11,
12922 rmso=\036E$<\0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
12926 cub1@, cuf1=^X, use=dg200,
12932 # above have both, the D210/211, for instance, has neither. We must use ANSI
12974 home=^P\0\0, ll=^P\0^W, use=dg-generic,
12980 sgr0=\017\025\035\036E, smso=^^D^\, use=dgkeys+15,
12981 use=dg6053,
13000 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
13006 ed=^^FF, use=d200-dg,
13021 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
13022 use=d210,
13032 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
13044 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
13047 use=d211-dg,
13063 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
13066 is3=\036Fz2, use=d216+,
13069 use=d216-unix,
13071 use=d216-unix-25,
13088 use=dg+color8, use=d470c,
13093 use=dg+color8, use=d470c-7b,
13106 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
13107 use=d470c-dg,
13117 smul=\E[4;50m, use=dgkeys+7b, use=d220,
13120 use=d220-dg,
13152 vpa=\020\177%p1%c, use=d210-dg,
13202 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
13224 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
13231 use=d400-dg,
13258 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
13263 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
13266 use=d410-dg,
13278 use=d216+,
13284 use=d412-unix,
13289 use=d462+,
13296 use=d462+,
13303 cud1@, cuu1@, ll@, use=d462+,
13306 use=d412-unix,
13308 use=d412-unix-w,
13310 use=d412-unix-25,
13312 use=d412-unix-s,
13314 use=d412-unix-sr,
13317 use=d413-unix,
13319 use=d413-unix-w,
13321 use=d413-unix-25,
13323 use=d413-unix-s,
13325 use=d413-unix-sr,
13328 use=d413-dg, use=dg+fixed,
13330 use=d413-dg, use=dg+ccc,
13333 use=d413-unix, use=dgunix+fixed,
13335 use=d413-unix-w, use=dgunix+fixed,
13337 use=d413-unix-25, use=dgunix+fixed,
13339 use=d413-unix-s, use=dgunix+fixed,
13341 use=d413-unix-sr, use=dgunix+fixed,
13343 use=d413-unix, use=dgunix+ccc,
13345 use=d413-unix-w, use=dgunix+ccc,
13347 use=d413-unix-25, use=dgunix+ccc,
13349 use=d413-unix-s, use=dgunix+ccc,
13351 use=d413-unix-sr, use=dgunix+ccc,
13372 use=dg+color, use=d460,
13377 use=dg+color, use=d460-7b,
13391 use=dgmode+color, use=d460-dg,
13396 use=d411,
13398 use=d411-7b,
13400 use=d411-w,
13402 use=d411-7b-w,
13404 use=d411-dg,
13409 use=d411,
13411 use=d411-7b,
13413 use=d411-w,
13415 use=d411-7b-w,
13418 use=d411-dg,
13437 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
13439 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
13459 cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
13489 il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
13506 use=dm3025,
13543 use=vt100,
13546 # the ^S/^Q handshaking, so you can use vt100 flavors for things like
13552 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
13571 # The naming convention has been bent somewhat, with the use of E? (where
13573 # from the other Datamedias in use here, and yet to associate a model of
13579 use=dt80,
13583 use=dt80w,
13587 smir=\E[4h, use=dt80,
13644 use=vt100+fnkeys,
13646 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
13712 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
13714 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
13715 # The f110 and f200 have problems with vi(1). They use the ^V
13723 # initially for leaving the quoting capability out, since use of VI
13734 smso=\EG<, tsl=\Ef, use=f100,
13736 dch1@, use=f110,
13738 cols#132, use=f110,
13741 dch1@, use=f110,
13758 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
13760 cols#132, use=f200,
13765 flash=\Eb$<200/>\Ed, kcud1=^J, use=f200,
13767 cols#132, use=f200vi,
13801 use=go140,
13837 # appears that we cannot use naked INS LINE feature since it uses
13863 # into a backspace key. In use ESC must be pressed twice (to send)
13904 use=sb1,
13913 # This description is tricky: being able to use cup depends on there being
13926 # This loses on lines > 80 chars long, use at your own risk
13928 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
13930 xsb@, use=superbee,
13991 kf8=\177, kf9=\Ee, use=bee,
14000 use=bee,
14055 # h1510 assumed to be in sane escape mode. Else use h1500.
14094 lf2=red, lf3=green, use=vt52,
14096 cud1=^J, rmso=\ET, smso=\ES, use=hz1552,
14124 am, use=esprit,
14174 sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
14199 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
14203 use=ibm3161-C,
14205 # This really should not use setab/setaf, but it is clear that the
14213 smcup=\E!9/N\E>B, use=ibm3161,
14253 lines#25, use=dm1520,
14264 use=ibm3101,
14267 nel=^M^J, use=ibmmono,
14283 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
14284 use=ibm+color,
14287 use=ibmmono,
14290 nel=^M^J, use=ibmega-c,
14293 nel=^M^J, use=ibmega,
14297 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
14299 blink@, bold@, use=ibm5151,
14303 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
14307 use=ibmega-c,
14311 sgr0=\E[0;10m, use=ibm5154,
14315 sgr0=\E[0;10m, use=ibm5151,
14318 blink@, bold@, use=ibm5151,
14320 cols#40, lines#12, use=ibm6153-90,
14337 use=ibm8503,
14342 use=ibm5151, use=ibm+color,
14345 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
14346 use=ibm+color,
14359 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
14401 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
14406 use=ibmega-c,
14408 use=hft-c,
14411 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
14417 use=ibmega-c,
14422 # Note that we could use ibm+16color, but that is not how IBM defines this one.
14428 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6154,
14434 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153,
14439 tsl=\E[?%p1%dT, use=ibm6153,
14441 acsc@, use=aixterm,
14443 acsc@, use=aixterm-m,
14447 use=ibm+16color, use=aixterm,
14638 # use ZZ for mono, eg.
14725 # (use Ctrl-P to escape ^P, ^Y )
14756 rs2=\Eo1, use=icl6404,
14831 # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
14855 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
14856 use=abm85,
14861 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
14866 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
14880 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
14922 # A special terminal for use with library systems, primarily in Germany.
15009 # Does not use any multi-page features.
15012 use=p4,
15023 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
15038 vpa=\E[%i%p1%dd, use=p4,
15049 is2=\E[<12h\E[<14h, use=p8,
15061 # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
15103 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
15114 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
15123 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
15131 use=p9,
15139 use=p9-w,
15149 use=p9-8,
15157 use=p9-8-w,
15165 use=p9,
15173 use=p9-w,
15183 use=p9-8,
15191 use=p9-8-w,
15237 use=act4,
15241 is2=^S\E, rmso=^S, smso=^Y, use=mime,
15243 is2=^Y\E, rmso=^Y, smso=^S, use=mime,
15279 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
15283 use=mime3a,
15291 # programs that use curses and graphics mode this could be a problem.
15336 # Microterm does have a ROM exchange program- use it or lose big
15371 use=ncr260vt300an,
15377 use=ncr260vt300wan,
15383 use=ncr260vt300pp,
15389 use=ncr260vt300wpp,
15431 use=ncr260vppp,
15460 tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad,
15466 use=ncr260vt100an,
15474 smkx=\E=, use=ncr260vt100an,
15480 use=ncr260vt100pp,
15518 use=vt220+keypad,
15524 use=ncr260vt200an,
15530 use=ncr260vt200an,
15536 use=ncr260vt200pp,
15574 use=vt220+keypad,
15580 use=ncr260vt300an,
15586 use=ncr260vt300an,
15592 use=ncr260vt300pp,
15643 use=ncr260wy325pp,
15696 use=ncr260wy350pp,
15741 use=ncr260wy50+pp,
15777 use=ncr260wy60pp,
15779 use=ncr260vppp,
15781 use=ncr260vpwpp,
15783 use=ncr260vt100an,
15785 use=ncr260vt100pp,
15787 use=ncr260vt100wan,
15789 use=ncr260vt100wpp,
15791 use=ncr260vt200an,
15793 use=ncr260vt200pp,
15795 use=ncr260vt200wan,
15797 use=ncr260vt200wpp,
15799 use=ncr260vt300an,
15801 use=ncr260vt300pp,
15803 use=ncr260vt300wan,
15805 use=ncr260vt300wpp,
15807 use=ncr260wy50+pp,
15809 use=ncr260wy50+wpp,
15811 use=ncr260wy60pp,
15813 use=ncr260wy60wpp,
15846 use=ncrvt100an,
15991 dsl@, fsl@, tsl@, use=ndr9500,
15994 lines#25, use=ndr9500,
15997 lines#25, use=ndr9500-nl,
16004 sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500,
16007 lines#25, use=ndr9500-mc,
16012 dsl@, fsl@, tsl@, use=ndr9500-mc,
16015 lines#25, use=ndr9500-mc-nl,
16070 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
16102 # Tandem builds these things for use with its line of fault-tolerant
16108 use=adm3a,
16140 use=adm+sgr,
16157 cols#132, use=dt100,
16181 # Tektronix tubes are graphics terminals. Most of them use modified
16194 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
16197 is2=\E\017\E9, use=tek4012,
16200 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
16203 is2=\E\017\E\:, use=tek4014,
16206 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
16227 # Can't use cursor motion because it's memory relative, and
16252 lines#17, use=tek4025,
16256 smso=\037att e\r, use=tek4025-17,
16259 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
16274 # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
16277 # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
16293 # Here's the command file that I use to get rogue to work on the 4025.
16310 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
16345 use=vt100+fnkeys,
16365 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
16410 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
16441 # is that the cursor addressing is using VT52 mode, and a few others use the
16464 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
16472 # 4112 emulate the vt52 (use the vt52 termcap). There is also
16473 # an expected enhancement that will use ANSI standard sequences.
16496 cuu1=^K, use=tek4112,
16498 lines#5, use=tek4112,
16512 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
16569 rc@, sc@, smkx=\E=, use=vt100,
16573 # supplied another, less capable 4107 entry. So we'll use that for 4107 and
16574 # note that if jcoker wasn't confused you may be able to use this one.
16665 # The earliest UNIXes were designed to use these clunkers; nroff and a few
16735 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
16745 cud1=^J, rmso=^O, smso=^N, use=vc404,
16760 clear=^L, use=vc404,
16776 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100,
16857 kcud1=^J, use=apple2e,
16943 # DO NOT use any terminal emulation with this data base, it works directly
16998 smso=\E[m, smul=\E[4m, use=lisa,
17028 kbs=^H, kcub1=^H, kcud1=^J, use=lisaterm,
17030 # since it is much faster and cleaner to use the "lock scrolling region"
17038 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
17041 cols#132, use=mac,
17060 # For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
17062 # For Apple_Terminal v71+/v100+, use "nsterm-bce".
17064 # For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
17066 # For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
17086 # "nsterm". Note that the statusline (-s) versions use the window
17167 # use, the executable for Terminal.app is:
17188 # or use a monochrome monitor. The full color (-c) entries are useful
17262 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
17268 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
17274 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
17282 op=\E[0m, use=ibm+16color,
17292 use=nsterm+7,
17295 use=nsterm+s, use=nsterm+7,
17298 use=nsterm+c41, use=nsterm+7,
17301 use=nsterm+c, use=nsterm+7,
17304 use=nsterm+s, use=nsterm+c41, use=nsterm+7,
17307 use=nsterm+s, use=nsterm+c, use=nsterm+7,
17311 use=nsterm+acs,
17314 use=nsterm+s, use=nsterm+acs,
17317 use=nsterm+c41, use=nsterm+acs,
17320 use=nsterm+c, use=nsterm+acs,
17323 use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
17326 use=nsterm+s, use=nsterm+c, use=nsterm+acs,
17330 use=nsterm+mac,
17333 use=nsterm+s, use=nsterm+mac,
17336 use=nsterm+c41, use=nsterm+mac,
17339 use=nsterm+c, use=nsterm+mac,
17342 use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
17345 use=nsterm+s, use=nsterm+c, use=nsterm+mac,
17372 use=nsterm-c-s-acs,
17388 bce, bw, use=nsterm-16color,
17392 use=nsterm-16color,
17405 csr@, initc@, kend=\EOF, khome=\EOH, use=xterm+256color,
17406 use=nsterm-16color,
17447 # [using (ncv)]. The monochrome entry (-m) is useful if you use a
17462 # and -f2) entries use color for bold, standout and underlined text
17517 smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
17527 use=xnuppc+basic,
17532 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
17538 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
17580 use=xnuppc+basic,
17583 use=xnuppc+c, use=xnuppc+basic,
17586 use=xnuppc+b,
17589 use=xnuppc+b, use=xnuppc+c,
17592 use=xnuppc+f,
17595 use=xnuppc+f, use=xnuppc+c,
17598 use=xnuppc+f2,
17601 use=xnuppc+f2, use=xnuppc+c,
17605 use=xnuppc+80x25, use=xnuppc+basic,
17608 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
17611 use=xnuppc+80x30, use=xnuppc+basic,
17614 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
17617 use=xnuppc+90x30, use=xnuppc+basic,
17620 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
17623 use=xnuppc+100x37, use=xnuppc+basic,
17626 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
17629 use=xnuppc+112x37, use=xnuppc+basic,
17632 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
17635 use=xnuppc+128x40, use=xnuppc+basic,
17638 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
17641 use=xnuppc+128x48, use=xnuppc+basic,
17644 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
17647 use=xnuppc+144x48, use=xnuppc+basic,
17650 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
17653 use=xnuppc+160x64, use=xnuppc+basic,
17656 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
17659 use=xnuppc+200x64, use=xnuppc+basic,
17662 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
17665 use=xnuppc+200x75, use=xnuppc+basic,
17668 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
17671 use=xnuppc+256x96, use=xnuppc+basic,
17674 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
17738 # was refreshed. Note that this is probably needed only if you use
17794 kpp=\233T, ri=\215, rin@, use=amiga-h,
17797 # requires use of appropriate preferences settings.
17830 ri=\215, rin@, use=amiga-h,
17941 use=minix-3.0,
17944 use=ecma+color, use=minix-1.7,
17981 am, use=minix-old,
17984 use=klone+acs, use=minix-3.0,
18058 smso=\E(, use=adm3a,
18061 cols#88, lines#46, use=ansi-mini,
18131 smir=\E[4h, smkx=\E;iYA\E;jYC, use=minitel1,
18144 sgr0=\E[m, smkx@, smso=\E[7m, smul=\E[4m, use=minitel1b,
18202 smul=\EU", use=blit,
18245 use=bg2.0,
18248 use=bg2.0,
18263 use=bg1.25,
18266 use=bg1.25,
18375 use=tws-generic,
18377 ht=^I, use=tws-generic,
18379 ht=^I, use=tws2102-sna,
18384 use=tws-generic,
18387 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
18501 use=bq300,
18505 rs2=\E[?3h, use=bq300,
18510 rs2=\E[?3h, use=bq300,
18603 use=bq300-8,
18607 rs2=\233?3h, use=bq300-8,
18612 rs2=\233?3h, use=bq300-8,
18625 krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300,
18629 use=bq300-pc,
18633 rs2=\E[?3h, use=bq300-pc,
18638 rs2=\E[?3h, use=bq300-pc,
18649 kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8,
18653 use=bq300-8-pc,
18657 rs2=\E[?3h, use=bq300-8-pc,
18662 rs2=\E[?3h, use=bq300-8-pc,
18746 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
18749 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
18752 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
18979 kcud1=^J, nel=^M^J, use=ln03,
19032 rmso@, rmul@, smso@, smul@, use=vt100,
19094 rmkx=\Eu, smkx=\Et, use=h19-b,
19096 rmkx=\Eu, smkx=\Et, use=h19-u,
19101 # I have an old Zenith-19 terminal at home that still gets a lot of use.
19125 cnorm@, cvvis@, use=h19-b,
19127 cnorm=\Ex4, cvvis@, use=h19-b,
19130 dl1=\EM, il1=\EL, use=h19,
19140 # whenever the program tries to use insert mode, the effective
19159 # Then Emacs cannot use it. "Oh, no, but now inserting into a
19166 # works. Either Emacs doesn't try to use its inserting hack when
19215 use=z29a,
19218 use=z29a,
19221 use=z29a,
19248 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
19263 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
19287 is2@, use=ims950,
19292 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
19297 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
19339 ll=^K^X\r, vpa=\013%p1%c, use=intertube,
19377 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
19407 rf@, ri=\EM\E[K$<5/>, use=vt100,
19475 smul=\EG1, tbc=\E0, use=adm+sgr,
19516 # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
19518 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
19539 ll=\E[48;1H, use=rt6221,
19562 # For use with graphics software, all graphics modes should be set to factory
19564 # communication requirements. No delays are specified; use "stty ixon -ixany"
19585 cols#132, use=hirez100,
19617 # call their new company and what to use for a logo.
19623 kcuf1=^L, kcuu1=^K, use=adm3a,
19719 kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@, use=vt100,
19722 is2=\E[?7h\E[?3h\E[?5l, use=tab132,
19724 is2=\E[?7h\E[?3l\E[?5h, use=tab132,
19726 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
19769 dl1=\EM, il1=\EL, ip@, use=t1061,
19792 # Also toggle ^S/^Q for those of us who use Emacs.
19835 use=vt220,
19845 kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916,
19850 cols#132, use=ti916,
19855 cols#132, use=ti916-8,
19886 cols#132, use=ti924,
19888 cols#132, use=ti924-8,
19902 csr@, ind=\E[1S, ri=\E[1T, use=ti924,
19905 csr@, ind=\2331S, ri=\2331T, use=ti924-8,
19928 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi,
19938 kpp=\233T, kprt=\23335~, use=ti_ansi,
19954 smul@, use=adm+sgr,
19966 rmul@, smul@, use=adm+sgr,
20004 rmir@, smir@, use=vt132,
20006 rmir@, smir@, use=vt132,
20008 rmir@, smir@, use=vt132,
20111 cols#104, lines#36, use=masscomp,
20113 cols#64, lines#21, use=masscomp,
20138 # we would have to use \E&bn sequence to turn off colors (as well as all
20172 # gs6300 - can't use blue foreground, it clashes with underline;
20200 ht@, use=h19-u,
20239 tbc=\E[3g, use=vt100+fnkeys,
20265 is2=\r \E9, use=diablo1620,
20269 use=diablo1620,
20274 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
20276 use=diablo1640-lm,
20282 # in the space the cursor was at, so we use ^P return (and thus ^P newline for
20411 use=vt100,
20420 cols#136, use=ep4080,
20470 uc=\EG8\EG0, use=adm+sgr,
20526 # If you see doubled characters from these, use the linux-nic and xterm-nic
20774 # use CUF for this function and ignore HPR. ECMA-48 calls this "Character
20800 # use CUD for this function and ignore VPR. ECMA calls it `Line Position
20905 # format effector, so you can do this. But many systems use it in a
20908 # be an editor function, you cannot predict whether its use will create an
21251 # to use reverse-video standout so Emacs will look right.
21358 # * Change linux entry to use smacs=\E[11m and have an explicit acsc,
21370 # entries which use it will inherit them automatically.
21376 # * xterm doesn't try to use application keypad mode any more.
21390 # * Clean up duplicate long names for use with 4.4 library.
21398 # * Added dec-vt100 for use with the EWAN emulator.
21399 # * Added kmous to xterm for use with xterm's mouse-tracking facility.
21415 # by making them relative to use capabilities
21450 # * Correct the use dependencies in the ansi series.
21463 # * Make pcansi use the ansi.sys invis capability.
21570 # * Created ecma+color, linux can use it. Also added ech to linux.
21583 # * Changed all DEC VT300 and up terminals to use VT300 tab set
21591 # * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
21662 # * Back off the xterm entry to use r6 as a base.
21727 # * change initc in linux-c-nc to use 0..1000 range.
21735 # * use \0 rather than \200.
21738 # * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
21791 # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
21817 # which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
21862 # * change linux to use ncv#2, since underline does not work with color - TD
21867 # application modes, change kent to use the correct keypad code - TD
21890 # * update entries for BSD/OS console to use klone+sgr and klone+color
21908 # parent "use" clause -TD
21940 # * reorder ncsa entries to make ncsa-vt220 use the alternate function
21993 # use that, adjusting ncv as needed -TD
22008 # * change cons25w to use rs2 for reset rather than rs1 -TD
22015 # * add kmous capability to linux to use Joerg Schoen's gpm patch.
22052 # * modify kterm to use acsc via SCS controls.
22202 # * align with xterm #192's use of xterm-new -TD
22210 # * change wyse acsc strings to use 'i' map rather than 'I' -TD
22231 # * modify DEC entries (vt220, etc), to add sgr string, and to use
22291 # * correct order of use= in rxvt-basic -TD
22294 # * use kind/kri as shifted up/down cursor keys for xterm-new -TD
22328 # * use rxvt+pcfkeys in Eterm -TD
22332 # * add/use ansi+enq, vt100+enq and vt102+enq -TD
22398 # * add xterm+r6f2, use in mlterm and mrxvt entries -TD
22404 # * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
22410 # * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
22427 # * add teraterm4.59 entry, use that as primary teraterm entry, rename
22491 # * rename atari and st52 to atari-old, st52-old, use newer entries from
22557 # * add/use xterm+tmux chunk from xterm #271 -TD
22565 # * use bold rather than reverse for smso in sun-color (Yuri Pankov).