Lines Matching refs:keypad
662 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
666 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
672 # Consequently the End keypad key could not be set (it is relatively safe and
674 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
675 is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
687 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
689 is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
1260 # keypad!), loadable fonts, and strange highlighting modes ("dithered"
1398 # for the application keypad mode. We have added iris-ansi-ap rather than
1399 # change the original to keypad mode.
1413 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
1452 iris-ansi-ap|IRIS ANSI in application-keypad mode,
2148 # The VT100 series terminals have an auxiliary keypad, commonly referred to as
2156 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
2157 # always send the same "Esc O {code}" sequences. It is assumed that the keypad
2158 # is normally in Numeric Mode. If an application requires that the keypad be
2161 # defined the <smkx> string to include the codes that switch the keypad into
2164 # is a null string or is not defined, then the keypad is assumed to be in
2165 # Numeric Mode. If the <smkx> string switches the keypad into Application
2167 # necessary to reset the keypad to "Normal" mode, and it is also expected that
2171 # Here's a diagram of the VT100 keypad keys with their bindings.
2197 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap
2199 vt100+keypad|dec vt100 numeric keypad no fkeys,
2201 vt100+pfkeys|dec vt100 numeric keypad,
2203 use=vt100+keypad,
2204 vt100+fnkeys|dec vt100 numeric keypad,
2209 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
2229 vt220+keypad|dec vt220 numeric keypad,
2580 tsl=\E[1$}\E[H\E[K, use=vt220+keypad,
2974 # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
3042 # b) Does not implement vt100 keypad
3054 # a) This version has no function keys or numeric keypad. Unlike the older
3055 # version, the numeric keypad is entirely ignored.
3233 use=ecma+color, use=vt220+keypad,
3435 xterm+edit|fragment for 6-key editing-keypad,
3439 xterm+pc+edit|fragment for pc-style editing keypad,
3442 xterm+vt+edit|fragment for vt220-style editing keypad,
3637 # + maps the editing keypad
3640 # + maps numeric keypad "+" to ",".
3641 # + uses DEC-style control sequences for the application keypad.
3651 use=vt220+keypad,
3796 smul=\E[4m, use=ecma+color, use=vt220+keypad,
3851 # NumLock changes the application keypad to approximate vt100 keypad, except
3907 # support modifiers on cursor- and keypad keys because the program usually
4005 # b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
4194 use=rxvt+pcfkeys, use=vt220+keypad,
4199 # For the keypad, use Shift to temporarily override Application-Keypad
4467 # with NumLock set (to make the keypad transmit kf0-kf9).
4722 # e) numeric keypad sends only numbers (compare with vttest).
4968 use=rxvt+pcfkeys, use=vt220+keypad, use=screen,
5130 # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
5669 # add kb2 [center of keypad]
8470 # <smkx> and <rmkx> so that the keypad keys can be used as function keys.
9165 tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad,
9232 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad,
9338 use=vt220+keypad,
9536 use=wy370-nk, use=vt220+keypad,
9621 # keypad in Dec application mode which doesn't seem to work
9657 vpa=\E[%i%p1%dd, use=vt220+keypad,
9786 wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
10697 # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
12563 # numeric keypad. But it doesn't matter anyway, since making these
12976 # Like 6053, but adds reverse video and more keypad and function keys.
15460 tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad,
15518 use=vt220+keypad,
15574 use=vt220+keypad,
17517 smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
18327 # enable FC keypad: ^[[?<h,
18411 # DECKPNM numeric keypad mode: esc >
18412 # DECKPAM applic. keypad mode: esc =
18451 # SM DECNKM numeric keypad mode: esc [ ? 6 6 h
18452 # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
18519 # DECKPNM numeric keypad mode: esc >
18520 # DECKPAM applic. keypad mode: esc =
18949 # \E> disable alternate keypad mode (so it transmits numbers!)
19071 # 6 = keypad shifted (0 = keypad unshifted)
19093 h19-bs|heathkit w/keypad shifted,
19095 h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
19409 modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
19774 # converts the keypad to programmable function keys, and has other goodies.
20479 # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
21371 # * The linux entry can now recognize the center (keypad 5) key.
21376 # * xterm doesn't try to use application keypad mode any more.
21440 # * Make xterm entry do application-keypad mode again. I got complaints
21866 # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
21867 # application modes, change kent to use the correct keypad code - TD
21894 # * adjust xterm-xfree86 miscellaneous keypad keys, as per patch #94 - TD.
22122 # * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
22363 # * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
22389 # keypad -TD