Lines Matching +full:button +full:-

1 .\"-
2 .\" SPDX-License-Identifier: BSD-4-Clause
77 reports translation movement, button press/release
108 .Bl -tag -width indent
110 Emulate the third (middle) button for 2-button mice.
114 Set double click speed as the maximum interval in msec between button clicks.
127 The DTR line may need to be dropped for a 3-button mouse
132 When the third button emulation is enabled
160 button down will cause motion to be interpreted as
196 a 3-button mouse to operate in the
216 button down will cause motion to be interpreted as scrolling.
286 Some mice report middle button down events
299 .Bl -tag -compact -width modelxxx
343 Assign the physical button
345 to the logical button
348 More than one physical button may be assigned to a logical button at the
350 In this case the logical button will be down,
361 .Ar medium-low ,
362 .Ar medium-high
413 .Bl -tag -compact -width mousesystemsxxx
416 Most 2-button serial mice use this protocol.
425 MouseSystems 5-byte protocol.
426 3-button mice may use this protocol.
438 Some 3-button mice may be compatible
460 .Bl -tag -compact -width mousesystemsxxx
468 .Bl -tag -compact -width mousesystemsxxx
479 Make the physical button
481 act as the wheel mode button.
482 While this button is pressed, X and Y axis movement is reported to be zero
492 .Bl -tag -compact -width x__
548 The serial mouse has a D-Sub female 9- or 25-pin connector.
549 The bus and InPort mice have either a D-Sub male 9-pin connector
550 or a round DIN 9-pin connector.
551 The PS/2 mouse is equipped with a small, round DIN 6-pin connector.
564 Many people often assign the first, built-in
619 .Bl -enum -compact -width 1.X
634 Most 2-button serial mice support the
638 3-button serial mice may work with the
644 the third (middle) button will not function.
645 3-button serial mice may also work with the
647 protocol under which the third button may function as expected.
649 3-button serial mice may have a small switch to choose between
678 .Dl "vidcontrol -m on"
682 .Dl "moused -f -p <selected_port> -t <selected_protocol>"
694 This is useful if the user wants to use the built-in PS/2 pointing device
704 will not detect any movement or button state change and the application
712 .Bl -tag -width /dev/consolectl -compact
728 UNIX-domain stream socket for X10 MouseRemote events
731 .Dl "moused -p /dev/cuau0 -i type"
739 .Bd -literal -offset indent
740 moused -p /dev/cuau0
741 vidcontrol -m on
750 .Bd -literal -offset indent
751 moused -p /dev/mouse -t microsoft
752 vidcontrol -m on
763 .Dl "moused -p /dev/mouse -m 1=3 -m 3=1"
765 Assign the physical button 3 (right button) to the logical button 1
766 (logical left) and the physical button 1 (left) to the logical
767 button 3 (logical right).
770 .Dl "moused -p /dev/mouse -t intellimouse -z 4"
772 Report negative Z axis movement (i.e., mouse wheel) as the button 4 pressed
773 and positive Z axis movement (i.e., mouse wheel) as the button 5 pressed.
777 .Dl "ALL ALL = NOPASSWD: /usr/bin/killall -USR1 moused"
783 .Dl "killall -USR1 moused"
814 .An -nosplit
824 Many pad devices behave as if the first (left) button were pressed if
830 as fourth button events.
838 The logical button 1 (logical left) selects a region of text in the
840 The logical button 3 (logical right) extends the selected region.
841 The logical button 2 (logical middle) pastes the selected text
843 If the mouse has only two buttons, the middle, `paste' button
847 option to emulate the middle button, or use the
849 option to assign the physical right button to the logical middle button: