Lines Matching +full:port +full:- +full:specific
1 --
2 -- Copyright (C) The Internet Society (2005).
3 --
4 -- This document is subject to the rights, licenses and restrictions
5 -- contained in BCP 78, and except as set forth therein, the authors
6 -- retain all their rights.
7 --
8 -- This document and the information contained herein are provided on an
9 -- "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
10 -- OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
11 -- ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
12 -- INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
13 -- INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
14 -- WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
15 --
17 RSTP-MIB DEFINITIONS ::= BEGIN
19 -- -------------------------------------------------------------
20 -- MIB for IEEE 802.1w Rapid Spanning Tree Protocol
21 -- -------------------------------------------------------------
24 MODULE-IDENTITY, OBJECT-TYPE, Integer32, mib-2
25 FROM SNMPv2-SMI
27 FROM SNMPv2-TC
28 MODULE-COMPLIANCE, OBJECT-GROUP
29 FROM SNMPv2-CONF
31 FROM BRIDGE-MIB;
33 rstpMIB MODULE-IDENTITY
34 LAST-UPDATED "200512070000Z"
36 CONTACT-INFO
37 "Email: Bridge-mib@ietf.org"
51 ::= { mib-2 134 }
53 -- ---------------------------------------------------------- --
54 -- subtrees in the RSTP-MIB
55 -- ---------------------------------------------------------- --
61 -- -------------------------------------------------------------
62 -- Addition to the dot1dStp group
63 -- -------------------------------------------------------------
65 dot1dStpVersion OBJECT-TYPE
70 MAX-ACCESS read-write
76 IEEE 802.1D-1998 and 'rstp(2)' indicates the Rapid
78 clause 17 of 802.1D-2004. The values are directly from
89 dot1dStpTxHoldCount OBJECT-TYPE
91 MAX-ACCESS read-write
94 "The value used by the Port Transmit state machine to limit
105 --
106 -- { dot1dStp 18 } was used to represent dot1dStpPathCostDefault
107 -- in an earlier version of this MIB. It has since been
108 -- obsoleted, and should not be used.
109 --
111 dot1dStpExtPortTable OBJECT-TYPE
113 MAX-ACCESS not-accessible
116 "A table that contains port-specific Rapid Spanning Tree
120 dot1dStpExtPortEntry OBJECT-TYPE
122 MAX-ACCESS not-accessible
126 each port."
146 dot1dStpPortProtocolMigration OBJECT-TYPE
148 MAX-ACCESS read-write
152 to this object forces this port to transmit RSTP BPDUs.
159 dot1dStpPortAdminEdgePort OBJECT-TYPE
161 MAX-ACCESS read-write
164 "The administrative value of the Edge Port parameter. A
165 value of true(1) indicates that this port should be
166 assumed as an edge-port, and a value of false(2) indicates
167 that this port should be assumed as a non-edge-port.
182 dot1dStpPortOperEdgePort OBJECT-TYPE
184 MAX-ACCESS read-only
187 "The operational value of the Edge Port parameter. The
198 dot1dStpPortAdminPointToPoint OBJECT-TYPE
204 MAX-ACCESS read-write
207 "The administrative point-to-point status of the LAN segment
208 attached to this port, using the enumeration values of the
210 that this port should always be treated as if it is
211 connected to a point-to-point link. A value of
212 forceFalse(1) indicates that this port should be treated as
214 indicates that this port is considered to have a
215 point-to-point link if it is an Aggregator and all of its
218 auto-negotiation or by management means. Manipulating this
228 dot1dStpPortOperPointToPoint OBJECT-TYPE
230 MAX-ACCESS read-only
233 "The operational point-to-point status of the LAN segment
234 attached to this port. It indicates whether a port is
235 considered to have a point-to-point connection.
238 specific procedures defined for the MAC entity concerned,
240 determined dynamically; that is, it is re-evaluated whenever
242 the specific procedures defined for the MAC entity evaluate
243 a change in its point-to-point status."
248 dot1dStpPortAdminPathCost OBJECT-TYPE
250 MAX-ACCESS read-write
254 of this port to the path cost of paths toward the spanning
258 default Path Cost value to the port. If the default Path
268 "IEEE 802.1D-1998: Section 8.5.5.3"
271 -- -------------------------------------------------------------
272 -- rstpMIB - Conformance Information
273 -- -------------------------------------------------------------
279 -- -------------------------------------------------------------
280 -- Units of conformance
281 -- -------------------------------------------------------------
283 rstpBridgeGroup OBJECT-GROUP
293 rstpPortGroup OBJECT-GROUP
307 -- -------------------------------------------------------------
308 -- Compliance statements
309 -- -------------------------------------------------------------
311 rstpCompliance MODULE-COMPLIANCE
317 MANDATORY-GROUPS {