Lines Matching full:station

39  * Per/node (station) statistics.
280  * (on a station) or mac address (on an ap).  They key length
309  * only makes sense when operating as a station.  The other
310  * requests can be used when operating as a station or an
311  * ap (to effect a station).
315 #define	IEEE80211_MLME_ASSOC		1	/* associate station */
316 #define	IEEE80211_MLME_DISASSOC		2	/* disassociate station */
317 #define	IEEE80211_MLME_DEAUTH		3	/* deauthenticate station */
318 #define	IEEE80211_MLME_AUTHORIZE	4	/* authorize station */
319 #define	IEEE80211_MLME_UNAUTHORIZE	5	/* unauthorize station */
320 #define	IEEE80211_MLME_AUTH		6	/* authenticate station */
404  * Retrieve the WPA/RSN information element for an associated station.
429  * Station information block; the mac address is used
469  * Retrieve per-station information; to retrieve all
482  * Get/set per-station tx power cap.
524  * Station mode roaming parameters.  These are maintained
586  * Get/set per-station vlan tag.
655 #define	IEEE80211_IOC_STA_STATS		40	/* per-station statistics */
659 #define	IEEE80211_IOC_STA_TXPOW		44	/* per-station tx power limit */
683 #define	IEEE80211_IOC_STA_INFO		78	/* station/neighbor info */
712 #define	IEEE80211_IOC_STA_VLAN		109	/* per-station vlan tag */
762  * By default the scan will cause a BSS to be joined (in station/adhoc
766  * If the station is currently associated to an AP then a scan request
767  * will cause the station to leave the current channel and potentially
768  * miss frames from the AP.  Alternatively the station may notify the
770  * This ensures frames for the station are buffered by the AP.  This is
773  * be preempted by traffic.  If a station is not associated to an AP
849  * Dynamic WDS vaps are created when a station associates to
854  * to/from that station.  In both cases the bssid of the
864  * Station mode vap's normally depend on the device to notice