Lines Matching +full:high +full:- +full:precision

1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause
4  * Copyright (c) 2013 George V. Neville-Neil
33  * The following set of constants are from Document SFF-8472
43  * 0-95    Serial ID Defined by SFP MSA
44  * 96-127  Vendor Specific Data
45  * 128-255 Reserved
48  * 0-55    Alarm and Warning Thresholds
49  * 56-95   Cal Constants
50  * 96-119  Real Time Diagnostic Interface
51  * 120-127 Vendor Specific
52  * 128-247 User Writable EEPROM
53  * 248-255 Vendor Specific
65 /* Table 3.1 Two-wire interface ID: Data Fields */
75 	SFF_8472_ENCODING	= 11, /* Encoding Code for high speed
98 				    * 20-35] */
131 	SFF_8472_SN_START 	= 68, /* Vendor SN [Address A0h, Bytes 68-83] */
147 	SFF_8472_COMPLIANCE	= 94, /* SFF-8472 Compliance Indicates
148 				    * which revision of SFF-8472 the
167 					  * See SFF-8472 doc. */
183 	SFF_8472_TEMP_HIGH_ALM		= 0, /* Temp High Alarm  */
185 	SFF_8472_TEMP_HIGH_WARN		= 4, /* Temp High Warning */
187 	SFF_8472_VOLTAGE_HIGH_ALM	= 8, /* Voltage High Alarm */
189 	SFF_8472_VOLTAGE_HIGH_WARN	= 12, /* Voltage High Warning */
191 	SFF_8472_BIAS_HIGH_ALM		= 16, /* Bias High Alarm */
193 	SFF_8472_BIAS_HIGH_WARN		= 20, /* Bias High Warning */
195 	SFF_8472_TX_POWER_HIGH_ALM	= 24, /* TX Power High Alarm */
197 	SFF_8472_TX_POWER_HIGH_WARN	= 28, /* TX Power High Warning */
199 	SFF_8472_RX_POWER_HIGH_ALM	= 32, /* RX Power High Alarm */
201 	SFF_8472_RX_POWER_HIGH_WARN	= 36, /* RX Power High Warning */
204 	SFF_8472_RX_POWER4	= 56, /* Rx_PWR(4) Single precision
206 				    *  - Rx optical power. Bit 7 of
211 	SFF_8472_RX_POWER3	= 60, /* Rx_PWR(3) Single precision
213 				    * - Rx optical power.  Bit 7 of
218 	SFF_8472_RX_POWER2	= 64, /* Rx_PWR(2) Single precision
225 	SFF_8472_RX_POWER1	= 68, /* Rx_PWR(1) Single precision
232 	SFF_8472_RX_POWER0	= 72, /* Rx_PWR(0) Single precision
336  * RS(1) State Digital state of SFP input pin AS(1) per SFF-8079 or
337  * RS(1) per SFF-8431. Updated within 100ms of change on pin. See A2h
345  * This pin is also known as AS(0) in SFF-8079 and RS(0) in SFF-8431.
375  * remains high until data is ready to be read at which time the
382  * Identifier constants has taken from SFF-8024 rev 4.6 table 4.1
394 	SFF_8024_ID_XFPE	= 0x8, /* XFP-E */
397 	SFF_8024_ID_DWDM_SFP	= 0xB, /* DWDM-SFP */
410 	SFF_8024_ID_QSFP_DD	= 0x18, /* QSFP-DD 8X Pluggable Transceiver */
412 	SFF_8024_ID_SFP_DD	= 0x1A, /* SFP-DD 2X Pluggable Transceiver */
431 	"XFP-E",
434 	"DWDM-SFP/SFP+",
447 	"QSFP-DD",
449 	"SFP-DD",
528  * yielding a total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm).