Lines Matching full:logical
68 Bit[0] Reset all logical devices and restore configuration
72 all logical devices. This resets the contents of configuration
73 registers to their default state. All card's logical devices
77 Wait for Key state but all CSNs are preserved and logical devices
121 Selects the current logical device. All reads and writes of memory,
123 of the logical device written here. In addition, the I/O Range
124 Check and Activate commands operate only on the selected logical
125 device. This register is read/write. If a card has only 1 logical
134 For each logical device there is one activate register that controls
135 whether or not the logical device is active on the ISA bus. Bit[0],
136 if set, activates the logical device. Bits[7:1] are reserved and
138 logical device is activated, I/O range check must be disabled.
146 range programmed for use by a logical device.
150 is enabled. I/O range check is only valid when the logical
153 Bit[0], if set, forces the logical device to respond to I/O reads
154 of the logical device's assigned I/O range with a 0x55 when I/O
155 range check is in operation. If clear, the logical device drives
159 /*** addr 0x32 - 0x37 Logical Device Control Reserved for future use ***/
160 /*** addr 0x38 - 0x3F Logical Device Control Vendor Define ***/