Lines Matching +full:4 +full:mhz

31 #define	UMCS7840_MAX_PORTS	4
64 #define	MCS7840_DEV_REG_SP4		0x0c	/* Options for UART 4, R/W */
65 #define	MCS7840_DEV_REG_CONTROL4	0x0d	/* Control bits for UART 4,
76 						 * 4, R/W */
103 						 * configuration for Port 4,
108 						 * 4, R/W */
128 						 * 4, contains number of
131 						 * 4, contains number of
163 						 * 4, R/W */
166 						 * enable flag for Port 4, R/W */
178 #define	MCS7840_DEV_SPx_CLOCK_X1	0x00	/* CLK =  1.8432Mhz, max speed
180 #define	MCS7840_DEV_SPx_CLOCK_X2	0x10	/* CLK =  3.6864Mhz, max speed
182 #define	MCS7840_DEV_SPx_CLOCK_X35	0x20	/* CLK =  6.4512Mhz, max speed
184 #define	MCS7840_DEV_SPx_CLOCK_X4	0x30	/* CLK =  7.3728Mhz, max speed
186 #define	MCS7840_DEV_SPx_CLOCK_X7	0x40	/* CLK = 12.9024Mhz, max speed
188 #define	MCS7840_DEV_SPx_CLOCK_X8	0x50	/* CLK = 14.7456Mhz, max speed
190 #define	MCS7840_DEV_SPx_CLOCK_24MHZ	0x60	/* CLK = 24.0000Mhz, max speed
192 #define	MCS7840_DEV_SPx_CLOCK_48MHZ	0x70	/* CLK = 48.0000Mhz, max speed
194 #define	MCS7840_DEV_SPx_CLOCK_SHIFT	4	/* Value 0..7 can be shifted
209 							 * 2,3,4 */
244  * devices and pulled-up to 1 for 4-port devices.
246 #define	MCS7840_DEV_GPIO_4PORTS		0x01	/* Device has 4 ports
255  * Default PLL input frequency Fin is 12Mhz (on-chip).
275 #define	MCS7840_DEV_CLOCK_MUX_IN12MHZ	0x00	/* 12Mhz PLL input, default */
281 						 * 20MHz-100MHz (default), 1 =
282 						 * 100MHz-300MHz range */
305 #define	MCS7840_DEV_CLOCK_SELECT4_MASK	0x38	/* Bits for port 4 in
307 #define	MCS7840_DEV_CLOCK_SELECT4_SHIFT	3	/* Shift for port 4 in
310 						 * from 96Mhz, default for all
312 #define	MCS7840_DEV_CLOCK_SELECT_30MHZ	0x01	/* 30Mhz */
313 #define	MCS7840_DEV_CLOCK_SELECT_96MHZ	0x02	/* 96Mhz direct */
314 #define	MCS7840_DEV_CLOCK_SELECT_120MHZ	0x03	/* 120Mhz */
333 #define	MCS7840_DEV_MODE_SELECT24S	0x20	/* 0: 4 Serial Ports / IrDA
359 #define	MCS7840_DEV_RX_SAMPLING2_SHIFT	4	/* Shift for port 2 in
365 #define	MCS7840_DEV_RX_SAMPLING4_MASK	0xf0	/* Bits for port 4 in
367 #define	MCS7840_DEV_RX_SAMPLING4_SHIFT	4	/* Shift for port 4 in
391 						 * 4, default */
419 					 * 4, R/W */
421 					 * 4, R/W */
423 					 * 4, R/W */
558 #define	MCS7840_UART_FCR_RTL_1_4	0x40	/* L1 = 1, L2 = 4 */