Lines Matching +full:20 +full:brief
25 * \brief The file defines the constants, data structure, and functions defined by LL API
133 * \brief AGSA_FLIP_2_BYTES macro
141 * \brief AGSA_FLIP_4_BYTES macro
154 * \brief LEBIT16_TO_BIT16 macro
163 * \brief BIT16_TO_LEBIT16 macro
172 * \brief BEBIT16_TO_BIT16 macro
181 * \brief BIT16_TO_BEBIT16 macro
190 * \brief LEBIT32_TO_BIT32 macro
199 * \brief BIT32_TO_LEBIT32 macro
208 * \brief BEBIT32_TO_BIT32 macro
217 * \brief BIT32_TO_BEBIT32 macro
267 * \brief LEBIT16_TO_BIT16 macro
276 * \brief BIT16_TO_LEBIT16 macro
285 * \brief BEBIT16_TO_BIT16 macro
294 * \brief BIT16_TO_BEBIT16 macro
303 * \brief LEBIT32_TO_BIT32 macro
312 * \brief BIT32_TO_LEBIT32 macro
321 * \brief BEBIT32_TO_BIT32 macro
330 * \brief BIT32_TO_BEBIT32 macro
1641 /** \brief data structure stores OS specific and LL specific context
1662 /** \brief hold points to global data structures used by the LL and OS Layers
1674 /** \brief holds the pointers to the device data structure used by the LL and OS Layers
1684 /** \brief holds the pointers to the port data structure used by the LL and
1701 /** \brief data structure pointer to IO request structure
1714 /** \brief handle to access frame
1720 /** \brief describe a SAS ReCofiguration structure in the SAS/SATA hardware
1743 /** \brief describe a Phy Analog Setup registers for a Controller in the SAS/SATA hardware
1764 /** \brief
1772 /** \brief describe a Phy Analog Setting
1792 /** \brief describe a Open reject retry backoff threshold page
1805 /** \brief describe a Phy Rate Control
1839 /** \brief describe a Register Dump information for a Controller in the SAS/SATA hardware
1871 20: LMS_DSS(A) GSM register at [MEMBASE-III SHIFT = 0x04_0000]
1929 /** \brief describe a NVMData for a Controller in the SAS/SATA hardware
1988 /** \brief agsaPCIeDiagResponse_t
2007 /** \brief describe a fatal error information for a Controller in the SAS/SATA hardware
2026 /** \brief describe a information for a Event in the SAS/SATA hardware
2038 /** \brief describe a information for a Controller in the SAS/SATA hardware
2071 /** \brief describe a status for a Controller in the SAS/SATA hardware
2095 /** \brief describe a GPIO Event Setup Infomation in the SAS/SATA hardware
2108 /** \brief describe a GPIO Pin Setup Infomation in the SAS/SATA hardware
2121 /** \brief describe a serial GPIO operation in the SAS/SATA hardware
2132 /** \brief describe a GPIO Read Infomation in the SAS/SATA hardware
2142 bit32 gpioEventLevelChangePart2; /* GPIEVCHANGE (pins 23-20) */
2144 bit32 gpioEventRisingEdgePart2; /* GPIEVRISE (pins 23-20) */
2146 bit32 gpioEventFallingEdgePart2; /* GPIEVALL (pins 23-20) */
2149 /** \brief describe a serial GPIO request and response in the SAS/SATA hardware
2166 /** \brief describe a serial GPIO operation response in the SAS/SATA hardware
2182 /** \brief SGPIO configuration register 1
2197 /** \brief describe a configuration for a PHY in the SAS/SATA hardware
2216 /** \brief Structure is used as a parameter passed in saLocalPhyControlCB() to describe the error c…
2239 /** \brief structure describe error counters of a PHY in the SAS/SATA
2265 /** \brief
2278 /** \brief structure describes bandwidth counters of a PHY in the SAS/SATA
2293 /** \brief structure describe hardware configuration
2311 /** \brief structure describe software configuration
2457 /** \brief generic memory descriptor
2477 /** \brief specify the controller Event Log for the SAS/SATA LL Layer
2498 /** \brief specify the SAS Diagnostic Parameters for the SAS/SATA LL Layer
2515 /** \brief for the SAS/SATA LL Layer
2527 /** \brief specify the memory allocation requirement for the SAS/SATA LL Layer
2541 /** \brief describe a SAS address and PHY Identifier
2553 /** \brief data structure provides some information about a SATA device
2601 Bit 20: Initiator Role
2615 #define DEV_INFO_IR_SHIFT 20
2641 /** \brief data structure provides some information about a SATA device
2674 /** \brief data structure provides some information about a SAS device
2731 /** \brief the data structure describe SG list
2743 /** \brief data structure used to pass information about the scatter-gather list to the LL Layer
2761 /** \brief data structure is used to pass information about the extended
2780 /** \brief data structure describes an SSP Command INFORMATION UNIT
2849 #define DIF_FLAG_BITS_UDTVMASK 0x03F00000 /* 20 21 22 23 24 25 */
2850 #define DIF_FLAG_BITS_UDTV_SHIFT 20
2880 /** \brief data structure describes a SAS SSP command request to be sent to the target device
2910 /** \brief data structure describes a SAS SSP command request Ext to be sent to the target device
2953 /** \brief data structure describes a SAS SSP target read and write request
3016 /** \brief data structure describes a SAS SSP target response to be issued
3046 /** \brief data structure describes a SMP request or response frame to be sent on the SAS port
3098 /** \brief union data structure specifies a request
3116 /** \brief data structure describes an STP or direct connect SATA command
3344 /* \brief data structure defines detail information about Agilent Error
3369 /** \brief data structure for SAS protocol timer configuration page.
3385 /** \brief data structure for firmware flash update saFwFlashUpdate().
3399 /** \brief data structure for extended firmware flash update saFwFlashExtUpdate().
3412 /** \brief data structure for firmware flash update saFwFlashUpdate().
3423 /** \brief data structure for set fields in MPI table.
3465 /** \brief Callback definition for .ossaDeviceRegistration
3476 /** \brief Callback definition for
3486 /** \brief Callback definition for
3492 /** \brief Callback definition for abort SMP SSP SATA callback
3513 /** \brief Callback definition for
3526 /** \brief Callback definition for
3538 /** \brief Callback definition for
3551 /** \brief Callback definition for
3599 #define SA_FW_TIMER_READS_STATUS_INTERVAL 20
3612 /** \brief describe an element of SPC-SPCV converter