Lines Matching +full:disable +full:- +full:radar +full:- +full:background
1 /*-
2 * SPDX-License-Identifier: BSD-2-Clause
4 * Copyright (c) 2007-2009 Sam Leffler, Errno Consulting
5 * Copyright (c) 2007-2009 Marvell Semiconductor, Inc.
39 #define MWL_MBSS_SUPPORT /* enable multi-bss support */
68 MWL_WME_AC_BK = 0, /* background access category */
85 * Query whether multi-bss support is available/enabled.
132 cause = bus_space_read_4(mh->mh_iot, mh->mh_ioh, in mwl_hal_getisr()
138 bus_space_write_4(mh->mh_iot, mh->mh_ioh, in mwl_hal_getisr()
139 MACREG_REG_A2H_INTERRUPT_CAUSE, cause &~ mh->mh_imask); in mwl_hal_getisr()
140 (void) bus_space_read_4(mh->mh_iot, mh->mh_ioh, in mwl_hal_getisr()
142 cause &= mh->mh_imask; in mwl_hal_getisr()
163 bus_space_write_4(mh->mh_iot, mh->mh_ioh, in mwl_hal_txstart()
165 (void) bus_space_read_4(mh->mh_iot, mh->mh_ioh, MACREG_REG_INT_CODE); in mwl_hal_txstart()
210 uint32_t wcbBase[MWL_NUM_TX_QUEUES - MWL_NUM_ACK_QUEUES];
215 * Supply tx/rx dma-related settings to the firmware.
222 uint32_t wcbBase[MWL_NUM_TX_QUEUES - MWL_NUM_ACK_QUEUES];
259 uint32_t RxNonCtlPkts; /* rx non-control frames */
313 * Set Radar Detection Configuration.
323 * Set the region code that selects the radar bin'ing agorithm.
328 * Initiate an 802.11h-based channel switch. The CSA ie
347 DOMAIN_CODE_ETSI_131 = 0x130,/* ETSI w/ 1.3.1 radar type */
356 * interpreted as MCS codes (this limits us to 0-127). The
416 #define KEY_TYPE_ID_AES 2 /* AES-CCMP */
497 * A-MPDU Block Ack (BA) stream support. There are several
524 * Set/get A-MPDU aggregation parameters.
579 * Enable/disable firmware operation. mwl_hal_start is
589 * If set is non-zero the AID is enabled, if zero it is removed.
594 * Enable/disable 11g protection use. This call specifies
600 * Enable/disable WMM support.
628 HTPROTECT_NONE = 0, /* disable */
641 * Enable/disable Marvell "turbo mode"".
666 * Enable/disable CF-End use.
671 * Enable/disable sta-mode DWDS use/operation.
676 * Diagnostic interface. This is an open-ended interface that