Lines Matching refs:Added
70 * Added union of request descriptors.
71 * Added union of reply descriptors.
73 * Added define for MPI2_VERSION_02_00.
79 * Added a sixth key value for the WriteSequence register
81 * Added message function codes for Diagnostic Buffer Post
88 * Added #defines for marking a reply descriptor as unused.
99 * Added RAID Accelerator functionality.
102 * Added MSI-x index mask and shift for Reply Post Host
104 * Added function code for Host Based Discovery Action.
106 * Added define for MPI2_FUNCTION_PWR_MGMT_CONTROL.
107 * Added defines for product-specific range of message
110 * Added alternative defines for the SGE Direction bit.
113 * Added MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR define.
115 * Added MPI2_FUNCTION_SEND_HOST_MESSAGE.
123 * Added Hard Reset delay timings.
128 * Added MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET.
139 * Added Scratchpad registers and
142 * Added MPI2_DIAG_SBR_RELOAD.
143 * Added MPI2_IOCSTATUS_INSUFFICIENT_POWER.
147 * Added V7 HostDiagnostic register defines
166 * 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags.
167 * Added Manufacturing Page 11.
168 * Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE
175 * Added configuration pages IOC Page 8 and Driver
181 * Added new value for AccessStatus field of SAS Device
183 * 10-31-07 02.00.04 Added missing SEPDevHandle field to
189 * Added MPI2_CONFIG_PAGE_BIOS_4.
190 * Added MPI2_CONFIG_PAGE_LOG_0.
192 * Added SAS Device IDs.
196 * 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA.
197 * Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION.
199 * Added missing MaxNumRoutedSasAddresses field to
201 * Added SAS Port Page 0.
208 * Added two new values for the Physical Disk Coercion Size
210 * Added product-specific Manufacturing pages 16 to 31.
213 * Added new bit to AdditionalControlFlags of SAS IO Unit
215 * Added SupportedPhysDisks field to RAID Volume Page 1 and
217 * Added additional defines for RAID Volume Page 0
221 * Added PhysDiskAttributes field (and related defines) to
223 * Added MPI2_SAS_PHYINFO_PHY_VACANT define.
224 * Added three new DiscoveryStatus bits for SAS IO Unit
227 * Added BootDeviceWaitTime field to SAS IO Unit Page 4.
230 * Added two new AccessStatus values to SAS Device Page 0
231 * for indicating routing problems. Added 3 reserved words
236 * Added more pending task bits to RAID Volume Page 0
238 * Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define.
239 * Added a new DiscoveryStatus bit for SAS IO Unit Page 0
244 * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define.
245 * Added PortGroups, DmaGroup, and ControlGroup fields to
247 * 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO
249 * Added expander reduced functionality data to SAS
251 * Added SAS PHY Page 2 and SAS PHY Page 3.
252 * 07-30-09 02.00.12 Added IO Unit Page 7.
253 * Added new device ids.
254 * Added SAS IO Unit Page 5.
255 * Added partial and slumber power management capable flags
257 * Added PhyInfo defines for power condition.
258 * Added Ethernet configuration pages.
259 * 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY.
260 * Added SAS PHY Page 4 structure and defines.
266 * Added/modified some MPI2_MFGPAGE_DEVID_SAS defines.
267 * Added PowerManagementCapabilities to IO Unit Page 7.
268 * Added PortWidthModGroup field to
270 * Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines.
271 * Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines.
272 * Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines.
273 * 05-12-10 02.00.15 Added MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT
275 * Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define.
276 * Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define.
279 * 11-10-10 02.00.17 Added ReceptacleID field (replacing Reserved1) to
282 * Added BoardTemperature and BoardTemperatureUnits fields
284 * Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define
286 * 02-23-11 02.00.18 Added ProxyVF_ID field to MPI2_CONFIG_REQUEST.
287 * Added IO Unit Page 8, IO Unit Page 9,
289 * Added SASNotifyPrimitiveMasks field to
295 * Added SpinupFlags field containing a Disable Spin-up bit
298 * 11-18-11 02.00.22 Added define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT.
299 * Added UEFIVersion field to BIOS Page 1 and defined new
302 * 11-27-12 02.00.23 Added MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER.
303 * Added MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID.
306 * Added some defines for 12G SAS speeds.
307 * 04-09-13 02.00.25 Added MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK.
310 * 08-19-13 02.00.26 Added reserved words to MPI2_CONFIG_PAGE_IO_UNIT_7 for
312 * 12-05-13 02.00.27 Added MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL for
314 * Added EnclosureLevel and ConnectorName fields to
316 * Added MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID for
318 * Added EnclosureLevel field to
320 * Added MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID for
322 * 01-08-14 02.00.28 Added more defines for the BiosOptions field of
324 * 06-13-14 02.00.29 Added SSUTimeout field to MPI2_CONFIG_PAGE_BIOS_1, and
327 * Added MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG.
328 * Added AdapterOrderAux fields to BIOS Page 3.
330 * Added BoardPowerRequirement, PCISlotPowerAllocation, and
332 * Added IO Unit Page 11.
333 * Added new SAS Phy Event codes
334 * Added PCIe configuration pages.
337 * 05-25-15 02.00.33 Added more defines for the BiosOptions field of
339 * 08-25-15 02.00.34 Added PCIe Device Page 2 SGL format capability.
340 * 12-18-15 02.00.35 Added SATADeviceWaitTime to SAS IO Unit Page 4.
341 * 01-21-16 02.00.36 Added/modified MPI2_MFGPAGE_DEVID_SAS defines.
342 * Added Link field to PCIe Link Pages
343 * Added EnclosureLevel and ConnectorName to PCIe
345 * Added define for PCIE IoUnit page 1 max rate shift.
346 * Added comment for reserved ExtPageTypes.
347 * Added SAS 4 22.5 gbs speed support.
348 * Added PCIe 4 16.0 GT/sec speec support.
351 * Added NegotiatedLinkRate and NegotiatedPortWidth to
354 * 07-01-16 02.00.38 Added Manufacturing page 7 Connector types.
357 * Added SATADeviceWaitTime to IO Unit Page 11.
358 * Added MPI26_MFGPAGE_DEVID_SAS4008
359 * Added x16 PCIe width to IO Unit Page 7
360 * Added LINKFLAGS to control SRIS in PCIe IO Unit page 1
362 * Added InitStatus to PCIe IO Unit Page 1 header.
363 * 09-01-16 02.00.39 Added MPI26_CONFIG_PAGE_ENCLOSURE_0 and related defines.
364 * Added MPI26_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE and
366 * 02-02-17 02.00.40 Added MPI2_MANPAGE7_SLOT_UNKNOWN.
367 * Added ChassisSlot field to SAS Enclosure Page 0.
368 * Added ChassisSlot Valid bit (bit 5) to the Flags field
370 * 06-13-17 02.00.41 Added MPI26_MFGPAGE_DEVID_SAS3816 and
373 * Added MPI26_PCIEIOUNIT1_LINKFLAGS_SRNS_EN define.
378 * 09-29-17 02.00.42 Added ControllerResetTO field to PCIe Device Page 2.
379 * Added NOIOB field to PCIe Device Page 2.
380 * Added MPI26_PCIEDEV2_CAP_DATA_BLK_ALIGN_AND_GRAN to
388 * 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention.
399 * 10-28-09 02.00.08 Added defines for decoding the ResponseInfo bytes for
401 * Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY.
402 * Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define.
404 * 05-12-10 02.00.10 Added optional vendor-unique region to SCSI IO Request.
405 * 11-10-10 02.00.11 Added MPI2_SCSIIO_NUM_SGLOFFSETS define.
407 * 02-06-12 02.00.13 Added alternate defines for Task Priority / Command
409 * Added EEDPErrorOffset to MPI2_SCSI_IO_REPLY.
410 * 07-10-12 02.00.14 Added MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION.
411 * 04-09-13 02.00.15 Added SCSIStatusQualifier field to MPI2_SCSI_IO_REPLY,
415 * Added MPI26_SCSIIO_IOFLAGS_ESCAPE_PASSTHROUGH.
416 * Added MPI2_SEP_REQ_SLOTSTATUS_DEV_OFF and
418 * 08-26-15 02.00.18 Added SCSITASKMGMT_MSGFLAGS for Target Reset.
419 * 12-18-15 02.00.19 Added EEDPObservedValue added to SCSI IO Reply message.
429 * Added TotalImageSize field to FWDownload Request.
430 * Added reserved words to FWUpload Request.
431 * 06-26-07 02.00.02 Added IR Configuration Change List Event.
437 * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum
439 * Added SASAddress field to Initiator Device Table
441 * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING
446 * Added define for
448 * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID.
449 * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of
456 * Added Log Entry Added Event and related structure.
457 * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID.
459 * Added MaxVolumes and MaxPersistentEntries fields to
461 * Added ProtocalFlags and IOCCapabilities fields to
471 * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX.
472 * Added two new RAIDOperation values for Integrated RAID
474 * Added four new IR Configuration Change List Event data
476 * Added two new ReasonCode defines for SAS Device Status
478 * Added three new DiscoveryStatus bits for the SAS
480 * Added Multiplexing Status Change bit to the PhyStatus
484 * Added defines for the indivdual signature bytes
486 * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define.
487 * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR
489 * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE
492 * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define.
493 * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define.
494 * Added two new reason codes for SAS Device Status Change
496 * Added new event: SAS PHY Counter.
497 * 07-30-09 02.00.12 Added GPIO Interrupt event define and structure.
498 * Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
499 * Added new product id family for 2208.
500 * 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST.
501 * Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY.
502 * Added MinDevHandle field to MPI2_IOC_FACTS_REPLY.
503 * Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY.
504 * Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define.
505 * Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define.
506 * Added Host Based Discovery Phy Event data.
507 * Added defines for ProductID Product field
511 * 02-10-10 02.00.14 Added SAS Quiesce Event structure and defines.
512 * Added PowerManagementControl Request structures and
515 * Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define.
516 * 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC.
517 * 02-23-11 02.00.17 Added SAS NOTIFY Primitive event, and added
520 * Added Temperature Threshold Event.
521 * Added Host Message Event.
522 * Added Send Host Message request and reply.
527 * 08-24-11 02.00.19 Added PhysicalPort field to
531 * 03-29-12 02.00.21 Added a product specific range to event values.
532 * 07-26-12 02.00.22 Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE.
533 * Added ElapsedSeconds field to
537 * Added MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE.
538 * Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY.
539 * Added Encrypted Hash Extended Image.
540 * 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS.
543 * Added MPI2_EVENT_ACTIVE_CABLE_EXCEPTION and
545 * Added MPI2_EVENT_PCIE_LINK_COUNTER and
547 * Added MPI26_CTRL_OP_SHUTDOWN.
548 * Added MPI26_CTRL_OP_LINK_CLEAR_ERROR_LOG
549 * Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS and
551 * 08-25-15 02.00.27 Added IC ARCH Class based signature defines.
552 * Added MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED event.
553 * Added ConigurationFlags field to IOCInit message to
555 * Added PCIe SRIOV support.
556 * 02-17-16 02.00.28 Added SAS 4 22.5 gbs speed support.
557 * Added PCIe 4 16.0 GT/sec speec support.
560 * 07-01-16 02.00.29 Added Archclass for 4008 product.
561 * Added IOCException MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED.
562 * 08-23-16 02.00.30 Added new defines for the ImageType field of FWDownload
564 * Added new defines for the ImageType field of FWUpload
566 * Added new values for the RegionType field in the Layout
568 * Added new defines for the ReasonCode field of
570 * Added MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE and
572 * 11-23-16 02.00.31 Added MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR and
574 * 02-02-17 02.00.32 Added MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP.
575 * Added MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT and related
577 * 06-13-17 02.00.33 Added MPI2_FW_DOWNLOAD_ITYPE_CPLD.
578 * 09-29-17 02.00.34 Added MPI26_EVENT_PCIDEV_STAT_RC_PCIE_HOT_RESET_FAILED
587 * 02-29-08 02.00.02 Added MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD.
588 * 05-21-08 02.00.03 Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that
591 * 07-30-09 02.00.04 Added proper define for the Use Default Settings bit of
593 * 05-12-10 02.00.05 Added MPI2_RAID_VOL_FLAGS_OP_MDC define.
594 * 08-24-10 02.00.06 Added MPI2_RAID_ACTION_COMPATIBILITY_CHECK along with
596 * Added product-specific range to RAID Action values.
598 * 02-06-12 02.00.08 Added MPI2_RAID_ACTION_PHYSDISK_HIDDEN.
599 * 07-26-12 02.00.09 Added ElapsedSeconds field to MPI2_RAID_VOL_INDICATOR.
600 * Added MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID define.
601 * 04-17-13 02.00.10 Added MPI25_RAID_ACTION_ADATA_ALLOW_PI.
606 * 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit
608 * 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control
613 * 08-11-10 02.00.05 Added NCQ operations to SAS IO Unit Control.
615 * 07-10-12 02.00.07 Added MPI2_SATA_PT_SGE_UNION for use in the SATA
621 * Added MPI2_SATA_PT_REQ_PT_FLAGS_FPDMA.
626 * 08-31-07 02.00.01 Added Command Buffer Data Location Address Space bits to
633 * 02-10-10 02.00.04 Added comment to MPI2_TARGET_SSP_RSP_IU structure.
635 * 11-27-12 02.00.06 Added InitiatorDevHandle field to MPI2_TARGET_MODE_ABORT
637 * Added AbortType MPI2_TARGET_MODE_ABORT_DEVHANDLE and
639 * 06-13-14 02.00.07 Added MinMSIxIndex and MaxMSIxIndex fields to
643 * Added MPI26_TARGET_ASSIST_IOFLAGS_ESCAPE_PASSTHROUGH.
648 * 12-18-07 02.00.01 Added Diagnostic Buffer Post and Diagnostic Release
651 * 05-06-09 02.00.03 Added ISTWI Read Write Tool and Diagnostic CLI Tool.
652 * 07-30-09 02.00.04 Added ExtendedType field to DiagnosticBufferPost request
654 * Added MPI2_DIAG_BUF_TYPE_EXTENDED.
656 * 05-12-10 02.00.05 Added Diagnostic Data Upload tool.
657 * 08-11-10 02.00.06 Added defines that were missing for Diagnostic Buffer
659 * 05-25-11 02.00.07 Added Flags field and related defines to
666 * 08-19-13 02.00.11 Added MPI2_TOOLBOX_TEXT_DISPLAY_TOOL and related info.
667 * 01-08-14 02.00.12 Added MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC.
669 * 08-25-16 02.00.14 Added new values for the Flags field of Toolbox Clean
689 * 02-17-16 02.00.04 Added SAS 4 22.5 gbs speed support.
696 * 07-01-16 02.00.02 Added MPI26_NVME_FLAGS_FORCE_ADMIN_ERR_RESP to