Lines Matching +full:use +full:- +full:minimum +full:- +full:ecc
1 /*-
4 * SPDX-License-Identifier: BSD-3-Clause
72 #define IGC_CTRL_EXT_IAME 0x08000000 /* Int ACK Auto-mask */
89 #define IGC_RXD_STAT_PIF 0x80 /* passed in-exact filter */
127 #define IGC_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */
128 #define IGC_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */
176 /* Use byte values for the following shift parameters
214 #define IGC_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */
216 #define IGC_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */
278 /* 1000/H is not supported, nor spec-compliant. */
328 #define IGC_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
345 /* GPY211 - I225 defines */
426 /* Uncorrectable/correctable ECC Error counts and enable bits */
459 #define IGC_ICR_ECCER 0x00400000 /* Uncorrectable ECC Error */
490 * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
506 #define IGC_QVECTOR_MASK 0x7FFC /* Q-vector mask */
511 #define IGC_IMS_ECCER IGC_ICR_ECCER /* Uncorrectable ECC Error */
604 /* Loop limit on how long we wait for auto-negotiation to complete */
626 #define IGC_TXCW_ANE 0x80000000 /* Auto-neg enable */
880 /* 1000BASE-T Control Register */
896 /* 1000BASE-T Status Register */
919 #define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
920 #define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
1030 /* NVM Commands - Microwire */
1037 /* NVM Commands - SPI */
1041 #define NVM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */
1069 /* PCI/PCI-X/PCI-EX Config space */
1095 #define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
1128 /* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */
1139 * 1 = 50-80M
1140 * 2 = 80-110M
1141 * 3 = 110-140M
1170 * 15-5: page
1171 * 4-0: register offset
1189 /* Page 193 - Port Control Registers */
1194 /* Page 194 - KMRN Registers */
1208 #define IGC_N0_QUEUE -1
1230 /* DMA Coalescing BMC-to-OS Watchdog Enable */
1259 /* Minimum time for 1000BASE-T where no data will be transmit following move out
1263 /* Minimum time for 100BASE-T where no data will be transmit following move out
1268 #define IGC_LTRMINV_LTRV_MASK 0x000003FF /* LTR minimum value */
1270 #define IGC_LTRMINV_SCALE_MASK 0x00001C00 /* LTR minimum scale */