Lines Matching +full:spi +full:- +full:crc

1 /*-
4  * SPDX-License-Identifier: BSD-3-Clause
72 #define IGC_CTRL_EXT_IAME		0x08000000 /* Int ACK Auto-mask */
89 #define IGC_RXD_STAT_PIF	0x80    /* passed in-exact filter */
92 #define IGC_RXD_ERR_CE	0x01    /* CRC Error */
128 #define IGC_MANC_SMBUS_EN	0x00000001 /* SMBus Enabled - RO */
129 #define IGC_MANC_ASF_EN	0x00000002 /* ASF Enabled - RO */
175 #define IGC_RCTL_SECRC	0x04000000 /* Strip Ethernet CRC */
215 #define IGC_CTRL_ASDE		0x00000020  /* Auto-speed detect enable */
217 #define IGC_CTRL_ILOS		0x00000080  /* Invert Loss-Of Signal */
279 /* 1000/H is not supported, nor spec-compliant. */
311 #define IGC_TXD_CMD_IFCS	0x02000000 /* Insert FCS (Ethernet CRC) */
329 #define IGC_TCTL_RTLC		0x01000000 /* Re-transmit on late collision */
346 /* GPY211 - I225 defines */
507 #define IGC_QVECTOR_MASK	0x7FFC		/* Q-vector mask */
605 /* Loop limit on how long we wait for auto-negotiation to complete */
627 #define IGC_TXCW_ANE		0x80000000 /* Auto-neg enable */
881 /* 1000BASE-T Control Register */
897 /* 1000BASE-T Status Register */
920 #define PHY_1000T_CTRL		0x09 /* 1000Base-T Control Reg */
921 #define PHY_1000T_STATUS	0x0A /* 1000Base-T Status Reg */
1031 /* NVM Commands - Microwire */
1038 /* NVM Commands - SPI */
1042 #define NVM_A8_OPCODE_SPI	0x08 /* opcode bit-3 = address bit-8 */
1046 /* SPI NVM Status Register */
1070 /* PCI/PCI-X/PCI-EX Config space */
1096 #define MAX_PHY_REG_ADDRESS		0x1F  /* 5 bit address bus (0-0x1F) */
1129 /* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */
1140  * 1 = 50-80M
1141  * 2 = 80-110M
1142  * 3 = 110-140M
1171  * 15-5: page
1172  * 4-0: register offset
1190 /* Page 193 - Port Control Registers */
1195 /* Page 194 - KMRN Registers */
1209 #define IGC_N0_QUEUE 		-1
1231 /* DMA Coalescing BMC-to-OS Watchdog Enable */
1260 /* Minimum time for 1000BASE-T where no data will be transmit following move out
1264 /* Minimum time for 100BASE-T where no data will be transmit following move out