Lines Matching +full:enable +full:- +full:modem +full:- +full:interrupt
1 /*-
2 * SPDX-License-Identifier: BSD-2-Clause
35 #define CD180_GIVR 0x40 /* Global Interrupt Verctor Register */
37 #define CD180_PILR1 0x61 /* Priority Interrupt Level Register 1 */
38 #define CD180_PILR2 0x62 /* Priority Interrupt Level Register 2 */
39 #define CD180_PILR3 0x63 /* Priority Interrupt Level Register 3 */
47 #define CD180_EOIR 0x7F /* End of Interrupt Register */
51 #define CD180_IER 0x02 /* Interrupt Enable Register */
61 #define CD180_MCOR1 0x10 /* Modem Change Option 1 Register */
62 #define CD180_MCOR2 0x11 /* Modem Change Option 2 Register */
63 #define CD180_MCR 0x12 /* Modem Change Register */
65 #define CD180_MSVR 0x28 /* Modem Signal Value Register */
73 /* Global Interrupt Vector Register */
74 #define GIVR_IT_MSCI 0x01 /* Modem Signal Change Interrupt */
75 #define GIVR_IT_TDI 0x02 /* Transmit Data Interrupt */
76 #define GIVR_IT_RGDI 0x03 /* Receive Good Data Interrupt */
77 #define GIVR_IT_REI 0x07 /* Receive Exception Interrupt */
79 /* Global Interrupt Channel Register */
110 #define CCR_RCVREN 0x12 /* Receiver Enable */
112 #define CCR_XMTREN 0x18 /* Transmitter Enable */
114 /* Interrupt Enable Register */
115 #define IER_DSR 0x80 /* Enable interrupt on DSR change */
116 #define IER_CD 0x40 /* Enable interrupt on CD change */
117 #define IER_CTS 0x20 /* Enable interrupt on CTS change */
118 #define IER_RxData 0x10 /* Enable interrupt on Receive Data */
119 #define IER_RxSC 0x08 /* Enable interrupt on Receive Spec. Char */
120 #define IER_TxRdy 0x04 /* Enable interrupt on TX FIFO empty */
121 #define IER_TxMpty 0x02 /* Enable interrupt on TX completely empty*/
122 #define IER_RET 0x01 /* Enable interrupt on RX Except. Timeout */
143 #define COR2_TxIBE 0x40 /* Enable In-Band XON/XOFF Flow Control */
144 #define COR2_ETC 0x20 /* Embedded Tx Commands Enable */
147 #define COR2_RtsAO 0x04 /* RTS Automatic Output Enable */
148 #define COR2_CtsAE 0x02 /* CTS Automatic Enable */
149 #define COR2_DsrAE 0x01 /* DSR Automatic Enable */
154 #define COR3_FCT 0x20 /* Flow-Control Transparency Mode */
155 #define COR3_SCDE 0x10 /* Special Character Detection Enable */
156 #define COR3_RxTHMASK 0x0F /* RX FIFO Threshold value (1-8) */
166 /* Modem Change Option Register 1 */
167 #define MCOR1_DSRzd 0x80 /* Detect 0->1 transition of DSR */
168 #define MCOR1_CDzd 0x40 /* Detect 0->1 transition of CD */
169 #define MCOR1_CTSzd 0x20 /* Detect 0->1 transition of CTS */
170 #define MCOR1_DTRthMASK 0x0F /* Automatic DTR FC Threshold (1-8) chars */
172 /* Modem Change Option Register 2 */
173 #define MCOR2_DSRod 0x80 /* Detect 1->0 transition of DSR */
174 #define MCOR2_CDod 0x40 /* Detect 1->0 transition of CD */
175 #define MCOR2_CTSod 0x20 /* Detect 1->0 transition of CTS */
177 /* Modem Change Register */
182 /* Modem Signal Value Register */