Lines Matching refs:KdPrint
206 KdPrint(("Device is offline"));
267 KdPrint(("requestQueue addr is 0x%llX", (HPT_U64)(ULONG_PTR)req_dma_addr));
279 KdPrint(("RR18xx[%d,%d]: request queue allocated: 0x%p",
296 KdPrint(("RR18xx[%d,%d]: response queue allocated: 0x%p",
324 KdPrint(("IAL Error in IDENTIFY info: LBA not supported\n"));
329 KdPrint(("%25s - %s\n", "Capabilities", "LBA supported"));
334 KdPrint(("IAL Error in IDENTIFY info: DMA not supported\n"));
339 KdPrint(("%25s - %s\n", "Capabilities", "DMA supported"));
344 KdPrint(("IAL Error in IDENTIFY info: not able to find PIO mode\n"));
347 KdPrint(("%25s - 0x%02x\n", "PIO modes supported",
353 KdPrint(("IAL Error in IDENTIFY info: not able to find UDMA mode\n"));
360 KdPrint(("%25s - %s\n", "LBA48 addressing", "supported"));
365 KdPrint(("%25s - %s\n", "LBA48 addressing", "Not supported"));
466 KdPrint(("RR18xx [%d]: start channel (%d)", pMvSataAdapter->adapterId,
510 KdPrint(("RR18xx [%d]: Disable 8 bit PIO (CFA enabled) \n",
536 KdPrint(("RR18xx [%d]: channel %d, write cache enabled\n",
541 KdPrint(("RR18xx [%d]: channel %d, write cache not supported\n",
548 KdPrint(("RR18xx [%d]: channel =%d, disable write cache\n",
559 KdPrint(("RR18xx [%d]: channel=%d, write cache disabled\n",
565 KdPrint(("RR18xx [%d] Set transfer mode XFER_PIO_SLOW\n",
591 KdPrint(("RR18xx [%d] Set transfer mode XFER_PIO_4\n",
625 KdPrint(("RR18xx [%d] Set transfer mode XFER_UDMA_%d\n",
685 KdPrint(("RR18xx [%d]: channel=%d, read look ahead enabled\n",
690 KdPrint(("RR18xx [%d]: channel %d, Read Look Ahead not supported\n",
697 KdPrint(("RR18xx [%d]:channel %d, disable read look ahead\n",
708 KdPrint(("RR18xx [%d]:channel %d, read look ahead disabled\n",
715 KdPrint(("RR18xx [%d]: channel %d config EDMA, Non Queued Mode\n",
759 KdPrint(("RR18xx [%d,%d]: new device connected\n",
789 KdPrint(("RR18xx [%d,%d]: device disconnected\n",
801 KdPrint(("RR18xx [%d,%d]: channel removed\n",
808 KdPrint(("RR18xx [%d,%d]: channel already removed!!\n",
854 KdPrint(("RR18xx [%d,%d]: device connected event received\n",
862 KdPrint(("RR18xx [%d,%d]: device disconnected event received \n",
881 KdPrint(("RR18xx: DEVICE error event received, pci cause "
963 KdPrint(("pAdapter->pFreePRDLink:%p\n",pAdapter->pFreePRDLink));
1084 KdPrint(("channel %d: Set Features failed\n", channelIndex));
1088 KdPrint(("Failed to enable DMA, channel=%d", channelIndex));
1315 KdPrint(("RR18xx: io base address 0x%p\n", pMvSataAdapter->adapterIoBaseAddress));
1349 KdPrint(("Allocate command blocks\n"));
1353 KdPrint(("pCommandBlocks:%p\n",pAdapter->pCommandBlocks));
1387 KdPrint(("Allocate PRD Tables\n"));
1393 KdPrint(("prdTableAddr:%p\n",pAdapter->prdTableAddr));
1403 /* KdPrint(("i=%d,pAdapter->pFreePRDLink=%p\n",i,pAdapter->pFreePRDLink)); */
1418 KdPrint(("RR18xx[%d]: channel %d is connected\n",
1445 KdPrint(("pAdapter->mvChannel[channel].online:%x, channel:%d\n",
1456 KdPrint(("Initialize Devices\n"));
1617 KdPrint(("fMvResetBus(%p)", _vbus_p));
1631 KdPrint(("fMvResetBus() done"));
1828 KdPrint(("pPRDTable:%p\n",pPRDTable));
2015 KdPrint(("ENXIO\n"));
2181 KdPrint(("auto rebuild.\n"));
2235 KdPrint(("hpt_action(%lx,%lx{%x})\n", (u_long)sim, (u_long)ccb, ccb->ccb_h.func_code));
2268 /* KdPrint(("leave scsiio\n")); */
2273 KdPrint(("reset bus\n"));
2329 KdPrint(("invalid cmd\n"));
2334 /* KdPrint(("leave hpt_action..............\n")); */
2633 /* KdPrint(("psg[%d]:add=%p,size=%x,flag=%x\n", idx, psg->dSgAddress,psg->wSgSize,psg->wSgFlag)); */
2838 KdPrint(("bus_dmamap_load return %d\n", error));
2869 KdPrint(("fOsCommandDone(pcmd=%p, result=%d)\n", pCmd, pCmd->Result));
2918 KdPrint(("DPC Queue full!\n"));