69 	s32 ret_val;  in e1000_init_phy_params_82540()  local
89 	ret_val = e1000_get_phy_id(hw);  in e1000_init_phy_params_82540()
90 	if (ret_val)  in e1000_init_phy_params_82540()
104 		ret_val = -E1000_ERR_PHY;  in e1000_init_phy_params_82540()
110 	return ret_val;  in e1000_init_phy_params_82540()
161 	s32 ret_val = E1000_SUCCESS;  in e1000_init_mac_params_82540()  local
216 		ret_val = -E1000_ERR_CONFIG;  in e1000_init_mac_params_82540()
246 	return ret_val;  in e1000_init_mac_params_82540()
273 	s32 ret_val = E1000_SUCCESS;  in e1000_reset_hw_82540()  local
319 	return ret_val;  in e1000_reset_hw_82540()
332 	s32 ret_val;  in e1000_init_hw_82540()  local
338 	ret_val = mac->ops.id_led_init(hw);  in e1000_init_hw_82540()
339 	if (ret_val) {  in e1000_init_hw_82540()
373 	ret_val = mac->ops.setup_link(hw);  in e1000_init_hw_82540()
399 	return ret_val;  in e1000_init_hw_82540()
414 	s32 ret_val;  in e1000_setup_copper_link_82540()  local
424 	ret_val = e1000_set_phy_mode_82540(hw);  in e1000_setup_copper_link_82540()
425 	if (ret_val)  in e1000_setup_copper_link_82540()
430 		ret_val = hw->phy.ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL,  in e1000_setup_copper_link_82540()
432 		if (ret_val)  in e1000_setup_copper_link_82540()
435 		ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL,  in e1000_setup_copper_link_82540()
437 		if (ret_val)  in e1000_setup_copper_link_82540()
441 	ret_val = e1000_copper_link_setup_m88(hw);  in e1000_setup_copper_link_82540()
442 	if (ret_val)  in e1000_setup_copper_link_82540()
445 	ret_val = e1000_setup_copper_link_generic(hw);  in e1000_setup_copper_link_82540()
448 	return ret_val;  in e1000_setup_copper_link_82540()
463 	s32 ret_val = E1000_SUCCESS;  in e1000_setup_fiber_serdes_link_82540()  local
475 			ret_val = e1000_adjust_serdes_amplitude_82540(hw);  in e1000_setup_fiber_serdes_link_82540()
476 			if (ret_val)  in e1000_setup_fiber_serdes_link_82540()
480 		ret_val = e1000_set_vco_speed_82540(hw);  in e1000_setup_fiber_serdes_link_82540()
481 		if (ret_val)  in e1000_setup_fiber_serdes_link_82540()
487 	ret_val = e1000_setup_fiber_serdes_link_generic(hw);  in e1000_setup_fiber_serdes_link_82540()
490 	return ret_val;  in e1000_setup_fiber_serdes_link_82540()
501 	s32 ret_val;  in e1000_adjust_serdes_amplitude_82540()  local
506 	ret_val = hw->nvm.ops.read(hw, NVM_SERDES_AMPLITUDE, 1, &nvm_data);  in e1000_adjust_serdes_amplitude_82540()
507 	if (ret_val)  in e1000_adjust_serdes_amplitude_82540()
513 		ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_EXT_CTRL,  in e1000_adjust_serdes_amplitude_82540()
515 		if (ret_val)  in e1000_adjust_serdes_amplitude_82540()
520 	return ret_val;  in e1000_adjust_serdes_amplitude_82540()
531 	s32  ret_val;  in e1000_set_vco_speed_82540()  local
539 	ret_val = hw->phy.ops.read_reg(hw, M88E1000_PHY_PAGE_SELECT,  in e1000_set_vco_speed_82540()
541 	if (ret_val)  in e1000_set_vco_speed_82540()
544 	ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0005);  in e1000_set_vco_speed_82540()
545 	if (ret_val)  in e1000_set_vco_speed_82540()
548 	ret_val = hw->phy.ops.read_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);  in e1000_set_vco_speed_82540()
549 	if (ret_val)  in e1000_set_vco_speed_82540()
553 	ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);  in e1000_set_vco_speed_82540()
554 	if (ret_val)  in e1000_set_vco_speed_82540()
559 	ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0004);  in e1000_set_vco_speed_82540()
560 	if (ret_val)  in e1000_set_vco_speed_82540()
563 	ret_val = hw->phy.ops.read_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);  in e1000_set_vco_speed_82540()
564 	if (ret_val)  in e1000_set_vco_speed_82540()
568 	ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);  in e1000_set_vco_speed_82540()
569 	if (ret_val)  in e1000_set_vco_speed_82540()
572 	ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_PAGE_SELECT,  in e1000_set_vco_speed_82540()
576 	return ret_val;  in e1000_set_vco_speed_82540()
590 	s32 ret_val = E1000_SUCCESS;  in e1000_set_phy_mode_82540()  local
598 	ret_val = hw->nvm.ops.read(hw, NVM_PHY_CLASS_WORD, 1, &nvm_data);  in e1000_set_phy_mode_82540()
599 	if (ret_val) {  in e1000_set_phy_mode_82540()
600 		ret_val = -E1000_ERR_PHY;  in e1000_set_phy_mode_82540()
605 		ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_PAGE_SELECT,  in e1000_set_phy_mode_82540()
607 		if (ret_val) {  in e1000_set_phy_mode_82540()
608 			ret_val = -E1000_ERR_PHY;  in e1000_set_phy_mode_82540()
611 		ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL,  in e1000_set_phy_mode_82540()
613 		if (ret_val) {  in e1000_set_phy_mode_82540()
614 			ret_val = -E1000_ERR_PHY;  in e1000_set_phy_mode_82540()
621 	return ret_val;  in e1000_set_phy_mode_82540()
693 	s32  ret_val = E1000_SUCCESS;  in e1000_read_mac_addr_82540()  local
700 		ret_val = hw->nvm.ops.read(hw, offset, 1, &nvm_data);  in e1000_read_mac_addr_82540()
701 		if (ret_val) {  in e1000_read_mac_addr_82540()
717 	return ret_val;  in e1000_read_mac_addr_82540()