98 		phy->ops.power_up = e1000_power_up_phy_copper;  in e1000_init_phy_params_80003es2lan()
99 		phy->ops.power_down = e1000_power_down_phy_copper_80003es2lan;  in e1000_init_phy_params_80003es2lan()
107 	phy->ops.acquire	= e1000_acquire_phy_80003es2lan;  in e1000_init_phy_params_80003es2lan()
108 	phy->ops.check_polarity	= e1000_check_polarity_m88;  in e1000_init_phy_params_80003es2lan()
109 	phy->ops.check_reset_block = e1000_check_reset_block_generic;  in e1000_init_phy_params_80003es2lan()
110 	phy->ops.commit		= e1000_phy_sw_reset_generic;  in e1000_init_phy_params_80003es2lan()
111 	phy->ops.get_cfg_done	= e1000_get_cfg_done_80003es2lan;  in e1000_init_phy_params_80003es2lan()
112 	phy->ops.get_info	= e1000_get_phy_info_m88;  in e1000_init_phy_params_80003es2lan()
113 	phy->ops.release	= e1000_release_phy_80003es2lan;  in e1000_init_phy_params_80003es2lan()
114 	phy->ops.reset		= e1000_phy_hw_reset_generic;  in e1000_init_phy_params_80003es2lan()
115 	phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_generic;  in e1000_init_phy_params_80003es2lan()
117 	phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_80003es2lan;  in e1000_init_phy_params_80003es2lan()
118 	phy->ops.get_cable_length = e1000_get_cable_length_80003es2lan;  in e1000_init_phy_params_80003es2lan()
119 	phy->ops.read_reg	= e1000_read_phy_reg_gg82563_80003es2lan;  in e1000_init_phy_params_80003es2lan()
120 	phy->ops.write_reg	= e1000_write_phy_reg_gg82563_80003es2lan;  in e1000_init_phy_params_80003es2lan()
122 	phy->ops.cfg_on_link_up = e1000_cfg_on_link_up_80003es2lan;  in e1000_init_phy_params_80003es2lan()
179 	nvm->ops.acquire	= e1000_acquire_nvm_80003es2lan;  in e1000_init_nvm_params_80003es2lan()
180 	nvm->ops.read		= e1000_read_nvm_eerd;  in e1000_init_nvm_params_80003es2lan()
181 	nvm->ops.release	= e1000_release_nvm_80003es2lan;  in e1000_init_nvm_params_80003es2lan()
182 	nvm->ops.update		= e1000_update_nvm_checksum_generic;  in e1000_init_nvm_params_80003es2lan()
183 	nvm->ops.valid_led_default = e1000_valid_led_default_generic;  in e1000_init_nvm_params_80003es2lan()
184 	nvm->ops.validate	= e1000_validate_nvm_checksum_generic;  in e1000_init_nvm_params_80003es2lan()
185 	nvm->ops.write		= e1000_write_nvm_80003es2lan;  in e1000_init_nvm_params_80003es2lan()
204 		mac->ops.check_for_link = e1000_check_for_serdes_link_generic;  in e1000_init_mac_params_80003es2lan()
205 		mac->ops.setup_physical_interface =  in e1000_init_mac_params_80003es2lan()
210 		mac->ops.check_for_link = e1000_check_for_copper_link_generic;  in e1000_init_mac_params_80003es2lan()
211 		mac->ops.setup_physical_interface =  in e1000_init_mac_params_80003es2lan()
233 	mac->ops.get_bus_info = e1000_get_bus_info_pcie_generic;  in e1000_init_mac_params_80003es2lan()
235 	mac->ops.reset_hw = e1000_reset_hw_80003es2lan;  in e1000_init_mac_params_80003es2lan()
237 	mac->ops.init_hw = e1000_init_hw_80003es2lan;  in e1000_init_mac_params_80003es2lan()
239 	mac->ops.setup_link = e1000_setup_link_generic;  in e1000_init_mac_params_80003es2lan()
241 	mac->ops.check_mng_mode = e1000_check_mng_mode_generic;  in e1000_init_mac_params_80003es2lan()
243 	mac->ops.update_mc_addr_list = e1000_update_mc_addr_list_generic;  in e1000_init_mac_params_80003es2lan()
245 	mac->ops.write_vfta = e1000_write_vfta_generic;  in e1000_init_mac_params_80003es2lan()
247 	mac->ops.clear_vfta = e1000_clear_vfta_generic;  in e1000_init_mac_params_80003es2lan()
249 	mac->ops.read_mac_addr = e1000_read_mac_addr_80003es2lan;  in e1000_init_mac_params_80003es2lan()
251 	mac->ops.id_led_init = e1000_id_led_init_generic;  in e1000_init_mac_params_80003es2lan()
253 	mac->ops.blink_led = e1000_blink_led_generic;  in e1000_init_mac_params_80003es2lan()
255 	mac->ops.setup_led = e1000_setup_led_generic;  in e1000_init_mac_params_80003es2lan()
257 	mac->ops.cleanup_led = e1000_cleanup_led_generic;  in e1000_init_mac_params_80003es2lan()
259 	mac->ops.led_on = e1000_led_on_generic;  in e1000_init_mac_params_80003es2lan()
260 	mac->ops.led_off = e1000_led_off_generic;  in e1000_init_mac_params_80003es2lan()
262 	mac->ops.clear_hw_cntrs = e1000_clear_hw_cntrs_80003es2lan;  in e1000_init_mac_params_80003es2lan()
264 	mac->ops.get_link_up_info = e1000_get_link_up_info_80003es2lan;  in e1000_init_mac_params_80003es2lan()
267 	hw->mac.ops.set_lan_id(hw);  in e1000_init_mac_params_80003es2lan()
282 	hw->mac.ops.init_params = e1000_init_mac_params_80003es2lan;  in e1000_init_function_pointers_80003es2lan()
283 	hw->nvm.ops.init_params = e1000_init_nvm_params_80003es2lan;  in e1000_init_function_pointers_80003es2lan()
284 	hw->phy.ops.init_params = e1000_init_phy_params_80003es2lan;  in e1000_init_function_pointers_80003es2lan()
597 	if (!(hw->phy.ops.read_reg))  in e1000_phy_force_speed_duplex_80003es2lan()
603 	ret_val = hw->phy.ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);  in e1000_phy_force_speed_duplex_80003es2lan()
608 	ret_val = hw->phy.ops.write_reg(hw, GG82563_PHY_SPEC_CTRL, phy_data);  in e1000_phy_force_speed_duplex_80003es2lan()
614 	ret_val = hw->phy.ops.read_reg(hw, PHY_CONTROL, &phy_data);  in e1000_phy_force_speed_duplex_80003es2lan()
623 	ret_val = hw->phy.ops.write_reg(hw, PHY_CONTROL, phy_data);  in e1000_phy_force_speed_duplex_80003es2lan()
653 	ret_val = hw->phy.ops.read_reg(hw, GG82563_PHY_MAC_SPEC_CTRL,  in e1000_phy_force_speed_duplex_80003es2lan()
671 	ret_val = hw->phy.ops.write_reg(hw, GG82563_PHY_MAC_SPEC_CTRL,  in e1000_phy_force_speed_duplex_80003es2lan()
692 	if (!(hw->phy.ops.read_reg))  in e1000_get_cable_length_80003es2lan()
695 	ret_val = hw->phy.ops.read_reg(hw, GG82563_PHY_DSP_DISTANCE, &phy_data);  in e1000_get_cable_length_80003es2lan()
730 		hw->phy.ops.cfg_on_link_up(hw);  in e1000_get_link_up_info_80003es2lan()
824 	ret_val = mac->ops.id_led_init(hw);  in e1000_init_hw_80003es2lan()
831 	mac->ops.clear_vfta(hw);  in e1000_init_hw_80003es2lan()
842 	ret_val = mac->ops.setup_link(hw);  in e1000_init_hw_80003es2lan()
977 	ret_val = hw->phy.ops.read_reg(hw, GG82563_PHY_MAC_SPEC_CTRL, &data);  in e1000_copper_link_setup_gg82563_80003es2lan()
985 	ret_val = hw->phy.ops.write_reg(hw, GG82563_PHY_MAC_SPEC_CTRL, data);  in e1000_copper_link_setup_gg82563_80003es2lan()
996 	ret_val = hw->phy.ops.read_reg(hw, GG82563_PHY_SPEC_CTRL, &data);  in e1000_copper_link_setup_gg82563_80003es2lan()
1025 	ret_val = hw->phy.ops.write_reg(hw, GG82563_PHY_SPEC_CTRL, data);  in e1000_copper_link_setup_gg82563_80003es2lan()
1030 	ret_val = hw->phy.ops.commit(hw);  in e1000_copper_link_setup_gg82563_80003es2lan()
1053 	ret_val = hw->phy.ops.read_reg(hw, GG82563_PHY_SPEC_CTRL_2, &data);  in e1000_copper_link_setup_gg82563_80003es2lan()
1058 	ret_val = hw->phy.ops.write_reg(hw, GG82563_PHY_SPEC_CTRL_2, data);  in e1000_copper_link_setup_gg82563_80003es2lan()
1066 	ret_val = hw->phy.ops.read_reg(hw, GG82563_PHY_PWR_MGMT_CTRL, &data);  in e1000_copper_link_setup_gg82563_80003es2lan()
1074 	if (!hw->mac.ops.check_mng_mode(hw)) {  in e1000_copper_link_setup_gg82563_80003es2lan()
1077 		ret_val = hw->phy.ops.write_reg(hw, GG82563_PHY_PWR_MGMT_CTRL,  in e1000_copper_link_setup_gg82563_80003es2lan()
1082 		ret_val = hw->phy.ops.read_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,  in e1000_copper_link_setup_gg82563_80003es2lan()
1088 		ret_val = hw->phy.ops.write_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,  in e1000_copper_link_setup_gg82563_80003es2lan()
1097 	ret_val = hw->phy.ops.read_reg(hw, GG82563_PHY_INBAND_CTRL, &data);  in e1000_copper_link_setup_gg82563_80003es2lan()
1102 	ret_val = hw->phy.ops.write_reg(hw, GG82563_PHY_INBAND_CTRL, data);  in e1000_copper_link_setup_gg82563_80003es2lan()
1229 		ret_val = hw->phy.ops.read_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,  in e1000_cfg_kmrn_10_100_80003es2lan()
1234 		ret_val = hw->phy.ops.read_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,  in e1000_cfg_kmrn_10_100_80003es2lan()
1246 	return hw->phy.ops.write_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);  in e1000_cfg_kmrn_10_100_80003es2lan()
1280 		ret_val = hw->phy.ops.read_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,  in e1000_cfg_kmrn_1000_80003es2lan()
1285 		ret_val = hw->phy.ops.read_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,  in e1000_cfg_kmrn_1000_80003es2lan()
1294 	return hw->phy.ops.write_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);  in e1000_cfg_kmrn_1000_80003es2lan()
1399 	if (!(hw->mac.ops.check_mng_mode(hw) ||  in e1000_power_down_phy_copper_80003es2lan()
1400 	      hw->phy.ops.check_reset_block(hw)))  in e1000_power_down_phy_copper_80003es2lan()