Lines Matching full:lag
15419 * This LAG feature is only supported on the THOR2 or newer NIC
16346 * The LAG idx of this function. The lag_id is per port and the
16349 * This HW lag id is used for Truflow programming only.
16355 * The LAG ID of a hardware link aggregation group (LAG) whose
16356 * member ports include the port of this function. The LAG was
16358 * function is not a member of any LAG, the fw_lag_id will be 0xff.
24627 * This is the bitmap of all active ports in the LAG. Each bit
24635 * If the LAG mode is active-backup, only one port can be an active
24650 /* If this bit is set to '1', the port0 is a lag active port. */
24652 /* If this bit is set to '1', the port1 is a lag active port. */
24654 /* If this bit is set to '1', the port2 is a lag active port. */
24656 /* If this bit is set to '1', the port3 is a lag active port. */
24662 * This is the bitmap of all member ports in the LAG. Each bit
24667 * each must not be a member of another LAG. Note that on a 4-port
24672 /* If this bit is set to '1', the port0 is a lag member port. */
24674 /* If this bit is set to '1', the port1 is a lag member port. */
24676 /* If this bit is set to '1', the port2 is a lag member port. */
24678 /* If this bit is set to '1', the port3 is a lag member port. */
24709 * LAG ID of the created LAG. This LAG ID will also be returned
24760 /* Link aggregation group ID of the LAG to be updated. */
24779 * This is the bitmap of all active ports in the LAG. Each bit
24787 * If the LAG mode is active-backup, only one port can be an active
24802 /* If this bit is set to '1', the port0 is a lag active port. */
24804 /* If this bit is set to '1', the port1 is a lag active port. */
24806 /* If this bit is set to '1', the port2 is a lag active port. */
24808 /* If this bit is set to '1', the port3 is a lag active port. */
24814 * This is the bitmap of all member ports in the LAG. Each bit
24819 * each must not be a member of another LAG. Note that on a 4-port
24824 /* If this bit is set to '1', the port0 is a lag member port. */
24826 /* If this bit is set to '1', the port1 is a lag member port. */
24828 /* If this bit is set to '1', the port2 is a lag member port. */
24830 /* If this bit is set to '1', the port3 is a lag member port. */
24907 /* Link aggregation group ID of the LAG to be freed. */
24970 /* Link aggregation group ID of the LAG to be queried. */
24987 * This is the bitmap of all active ports in the LAG. Each bit
24995 * If the LAG mode is active-backup, only one port can be an active
25010 /* If this bit is set to '1', the port0 is a lag active port. */
25012 /* If this bit is set to '1', the port1 is a lag active port. */
25014 /* If this bit is set to '1', the port2 is a lag active port. */
25016 /* If this bit is set to '1', the port3 is a lag active port. */
25022 * This is the bitmap of all member ports in the LAG. Each bit
25027 * each must not be a member of another LAG. Note that on a 4-port
25032 /* If this bit is set to '1', the port0 is a lag member port. */
25034 /* If this bit is set to '1', the port1 is a lag member port. */
25036 /* If this bit is set to '1', the port2 is a lag member port. */
25038 /* If this bit is set to '1', the port3 is a lag member port. */
25119 /* This bit must be '1' for the lag id field to be configured. */
25139 * This is the bitmap of all active ports in the LAG. Each bit
25157 /* If this bit is set to '1', the port0 is a lag active port. */
25159 /* If this bit is set to '1', the port1 is a lag active port. */
25161 /* If this bit is set to '1', the port2 is a lag active port. */
25163 /* If this bit is set to '1', the port3 is a lag active port. */
25169 * This is the bitmap of all member ports in the LAG. Each bit
25176 * For a 4-port NIC, the LAG member port combination can consist of
25178 * that the case with three ports in the same lag group is not
25181 * panel ports. There could be a case to use multiple LAG groups,
25182 * for example, if the NIC has four front panel ports, the lag feature
25183 * can use up to two LAG groups, with two ports assigned to each group.
25186 /* If this bit is set to '1', the port0 is a lag member port. */
25188 /* If this bit is set to '1', the port1 is a lag member port. */
25190 /* If this bit is set to '1', the port2 is a lag member port. */
25192 /* If this bit is set to '1', the port3 is a lag member port. */
25297 * This is the bitmap of all active ports in the LAG. Each bit
25315 /* If this bit is set to '1', the port0 is a lag active port. */
25317 /* If this bit is set to '1', the port1 is a lag active port. */
25319 /* If this bit is set to '1', the port2 is a lag active port. */
25321 /* If this bit is set to '1', the port3 is a lag active port. */
25327 * This is the bitmap of all member ports in the LAG. Each bit
25334 * For a 4-port NIC, the LAG member port combination can consist of
25336 * that the case with three ports in the same lag group is not
25339 * panel ports. There could be a case to use multiple LAG groups,
25340 * for example, if the NIC has four front panel ports, the lag feature
25341 * can use up to two LAG groups, with two ports assigned to each group.
25344 /* If this bit is set to '1', the port0 is a lag member port. */
25346 /* If this bit is set to '1', the port1 is a lag member port. */
25348 /* If this bit is set to '1', the port2 is a lag member port. */
25350 /* If this bit is set to '1', the port3 is a lag member port. */
53135 * If set to 1, firmware is capable of HW LAG. This bit is only
53328 /* lag group ID configured for the function */
53378 /* lag group ID configured for the function */
62156 /* RoCE LAG message */
70546 /* Set LAG mode. */
77544 /* Set LAG mode. */
77564 /* Bitmap of ports that are members of the RoCE LAG. */
77583 /* Bitmap of ports that are members of the RoCE LAG. */
77631 /* Set LAG mode. */
78520 /* Set LAG mode. */