Lines Matching full:indicate
1806 * This field is used in Output records to indicate that the output
1808 * to indicate that the output has been completely written. When
2038 * This field is used to indicate device's capabilities and
2242 * This field will indicate if any subsystems is not fully
2247 * If set to 1, it will indicate to host drivers that firmware is
2265 * Firmware sets this flag along with dev_not_rdy flag to indicate
2429 * This field is used in Output records to indicate that the output
2431 * to indicate that the output has been completely written. When
3011 * updated. This flag is used by driver to indicate that in order
3335 * populate the opaque field to indicate the specific TX ring with which
3448 * populate the opaque field to indicate the specific TX ring with which
3840 * that the driver populate the opaque field to indicate the specific
4454 * units. Even values indicate 16B records. Odd values indicate 32B
4645 * units. Even values indicate 16B records. Odd values indicate 32B
4733 * record in 16B units. Even values indicate 16B
4734 * records. Odd values indicate 32B
4890 * record in 16B units. Even values indicate 16B
4891 * records. Odd values indicate 32B
5007 * record in 16B units. Even values indicate 16B
5008 * records. Odd values indicate 32B
5047 * opaque field to indicate the specific TX ring with which the
5138 * units. Even values indicate 16B records. Odd values indicate
5213 * This field was previously used to indicate fatal errors, which
5301 * record in 16B units. Even values indicate 16B
5302 * records. Odd values indicate 32B
5809 * record in 16B units. Even values indicate 16B
5810 * records. Odd values indicate 32B
6397 * record in 16B units. Even values indicate 16B
6398 * records. Odd values indicate 32B
7009 * record in 16B units. Even values indicate 16B
7010 * records. Odd values indicate 32B
7348 * record in 16B units. Even values indicate 16B
7349 * records. Odd values indicate 32B
7623 * record in 16B units. Even values indicate 16B
7624 * records. Odd values indicate 32B
8023 * record in 16B units. Even values indicate 16B
8024 * records. Odd values indicate 32B
8449 * record in 16B units. Even values indicate 16B
8450 * records. Odd values indicate 32B
8638 * to indicate MSS size to the stack.
8705 * record in 16B units. Even values indicate 16B
8706 * records. Odd values indicate 32B
9055 * record in 16B units. Even values indicate 16B
9056 * records. Odd values indicate 32B
9229 * to indicate MSS size to the stack.
9300 * record in 16B units. Even values indicate 16B
9301 * records. Odd values indicate 32B
9350 * record in 16B units. Even values indicate 16B
9351 * records. Odd values indicate 32B
9396 * record in 16B units. Even values indicate 16B
9397 * records. Odd values indicate 32B
9420 * to the VEE handler SW and is used to indicate what VEE VQ or
9442 * record in 16B units. Even values indicate 16B
9443 * records. Odd values indicate 32B
9520 * record in 16B units. Even values indicate 16B
9521 * records. Odd values indicate 32B
9553 * record in 16B units. Even values indicate 16B
9554 * records. Odd values indicate 32B
9561 * record in 16B units. Even values indicate 16B
9562 * records. Odd values indicate 32B
9603 * record in 16B units. Even values indicate 16B
9604 * records. Odd values indicate 32B
9644 * record in 16B units. Even values indicate 16B
9645 * records. Odd values indicate 32B
9951 * record in 16B units. Even values indicate 16B
9952 * records. Odd values indicate 32B
10014 * record in 16B units. Even values indicate 16B
10015 * records. Odd values indicate 32B
10058 * record in 16B units. Even values indicate 16B
10059 * records. Odd values indicate 32B
10131 * record in 16B units. Even values indicate 16B
10132 * records. Odd values indicate 32B
10195 * record in 16B units. Even values indicate 16B
10196 * records. Odd values indicate 32B
10255 * record in 16B units. Even values indicate 16B
10256 * records. Odd values indicate 32B
10299 * record in 16B units. Even values indicate 16B
10300 * records. Odd values indicate 32B
10357 * record in 16B units. Even values indicate 16B
10358 * records. Odd values indicate 32B
10445 * record in 16B units. Even values indicate 16B
10446 * records. Odd values indicate 32B
10462 * These bits indicate the status as being reported by the firmware.
10546 * record in 16B units. Even values indicate 16B
10547 * records. Odd values indicate 32B
10607 * record in 16B units. Even values indicate 16B
10608 * records. Odd values indicate 32B
10649 * then this field will indicate the ring id.
10661 * record in 16B units. Even values indicate 16B
10662 * records. Odd values indicate 32B
10705 * record in 16B units. Even values indicate 16B
10706 * records. Odd values indicate 32B
10749 * record in 16B units. Even values indicate 16B
10750 * records. Odd values indicate 32B
10793 * record in 16B units. Even values indicate 16B
10794 * records. Odd values indicate 32B
10840 * record in 16B units. Even values indicate 16B
10841 * records. Odd values indicate 32B
10887 * record in 16B units. Even values indicate 16B
10888 * records. Odd values indicate 32B
10934 * record in 16B units. Even values indicate 16B
10935 * records. Odd values indicate 32B
10978 * record in 16B units. Even values indicate 16B
10979 * records. Odd values indicate 32B
11026 * record in 16B units. Even values indicate 16B
11027 * records. Odd values indicate 32B
11119 * record in 16B units. Even values indicate 16B
11120 * records. Odd values indicate 32B
11183 * record in 16B units. Even values indicate 16B
11184 * records. Odd values indicate 32B
11247 * record in 16B units. Even values indicate 16B
11248 * records. Odd values indicate 32B
11304 * record in 16B units. Even values indicate 16B
11305 * records. Odd values indicate 32B
11345 * record in 16B units. Even values indicate 16B
11346 * records. Odd values indicate 32B
11392 * record in 16B units. Even values indicate 16B
11393 * records. Odd values indicate 32B
11433 * record in 16B units. Even values indicate 16B
11434 * records. Odd values indicate 32B
11512 * record in 16B units. Even values indicate 16B
11513 * records. Odd values indicate 32B
11545 * Value of 1 to indicate EEM TX configuration is enabled. Value of
11546 * 0 to indicate the EEM TX configuration is disabled.
11550 * Value of 1 to indicate EEM RX configuration is enabled. Value of 0
11551 * to indicate the EEM RX configuration is disabled.
11563 * record in 16B units. Even values indicate 16B
11564 * records. Odd values indicate 32B
11647 * record in 16B units. Even values indicate 16B
11648 * records. Odd values indicate 32B
11700 * record in 16B units. Even values indicate 16B
11701 * records. Odd values indicate 32B
11766 * record in 16B units. Even values indicate 16B
11767 * records. Odd values indicate 32B
11810 * record in 16B units. Even values indicate 16B
11811 * records. Odd values indicate 32B
11892 * record in 16B units. Even values indicate 16B
11893 * records. Odd values indicate 32B
11962 * record in 16B units. Even values indicate 16B
11963 * records. Odd values indicate 32B
12013 * record in 16B units. Even values indicate 16B
12014 * records. Odd values indicate 32B
12059 * record in 16B units. Even values indicate 16B
12060 * records. Odd values indicate 32B
12104 * record in 16B units. Even values indicate 16B
12105 * records. Odd values indicate 32B
12150 * record in 16B units. Even values indicate 16B
12151 * records. Odd values indicate 32B
12223 * record in 16B units. Even values indicate 16B
12224 * records. Odd values indicate 32B
12286 * record in 16B units. Even values indicate 16B
12287 * records. Odd values indicate 32B
12341 * record in 16B units. Even values indicate 16B
12342 * records. Odd values indicate 32B
12407 * record in 16B units. Even values indicate 16B
12408 * records. Odd values indicate 32B
12488 * record in 16B units. Even values indicate 16B
12489 * records. Odd values indicate 32B
12533 * record in 16B units. Even values indicate 16B
12534 * records. Odd values indicate 32B
12618 * record in 16B units. Even values indicate 16B
12619 * records. Odd values indicate 32B
12671 * record in 16B units. Even values indicate 16B
12672 * records. Odd values indicate 32B
12769 * record in 16B units. Even values indicate 16B
12770 * records. Odd values indicate 32B
12823 * record in 16B units. Even values indicate 16B
12824 * records. Odd values indicate 32B
12883 * record in 16B units. Even values indicate 16B
12884 * records. Odd values indicate 32B
12956 * record in 16B units. Even values indicate 16B
12957 * records. Odd values indicate 32B
13017 * record in 16B units. Even values indicate 16B
13018 * records. Odd values indicate 32B
13110 * record in 16B units. Even values indicate 16B
13111 * records. Odd values indicate 32B
13164 * record in 16B units. Even values indicate 16B
13165 * records. Odd values indicate 32B
13228 * record in 16B units. Even values indicate 16B
13229 * records. Odd values indicate 32B
14231 * This field is used in Output records to indicate that the output
14233 * to indicate that the output has been completely written. When
14310 * This field is used in Output records to indicate that the output
14312 * to indicate that the output has been completely written. When
14385 * This field is used in Output records to indicate that the output
14387 * to indicate that the output has been completely written. When
14461 * This field is used in Output records to indicate that the output
14463 * to indicate that the output has been completely written. When
14752 * This field is used in Output records to indicate that the output
14754 * to indicate that the output has been completely written. When
15693 * This field is used in Output records to indicate that the output
15695 * to indicate that the output has been completely written.
15907 * If multi-host mode is active, the 4 lsb will indicate
15977 * This field will indicate number of physical functions on this
16417 * This field is used in Output records to indicate that the output
16419 * to indicate that the output has been completely written. When
17390 * This field is used in Output records to indicate that the output
17392 * to indicate that the output has been completely written. When
17573 * This field is used in Output records to indicate that the output
17575 * to indicate that the output has been completely written. When
17714 * This field is used in Output records to indicate that the output
17716 * to indicate that the output has been completely written. When
17781 * This field is used in Output records to indicate that the output
17783 * to indicate that the output has been completely written. When
17847 * This field is used in Output records to indicate that the output
17849 * to indicate that the output has been completely written. When
17961 * registered PF's or trusted VF's indicate this support, then
18098 * (PF or VF driver) to indicate the list of asynchronous event
18141 * This field is used in Output records to indicate that the output
18143 * to indicate that the output has been completely written. When
18208 * This field is used in Output records to indicate that the output
18210 * to indicate that the output has been completely written. When
18344 * This field is used in Output records to indicate that the output
18346 * to indicate that the output has been completely written. When
18416 * This field is used in Output records to indicate that the output
18418 * to indicate that the output has been completely written. When
18470 * This field is used to indicate the driver type.
18538 * This field is used in Output records to indicate that the output
18540 * to indicate that the output has been completely written. When
18693 * This field is used in Output records to indicate that the output
18695 * to indicate that the output has been completely written. When
18838 * This field is used in Output records to indicate that the output
18840 * to indicate that the output has been completely written. When
19131 * This field is used in Output records to indicate that the output
19133 * to indicate that the output has been completely written. When
20248 * This field is used in Output records to indicate that the output
20250 * to indicate that the output has been completely written. When
21198 * This field is used in Output records to indicate that the output
21200 * to indicate that the output has been completely written.
21271 * Typical value would be 10 to indicate 1sec.
21278 * Typical value would be 30 to indicate 3sec.
21286 * Typical value would be 50 to indicate 5sec.
21294 * Typical value would be 20 to indicate 2sec.
21302 * Typical value would be 60 to indicate 6sec.
21515 * Typical value would be 10 to indicate 10msec.
21562 * This field is used in Output records to indicate that the output
21564 * to indicate that the output has been completely written.
21625 * This field is used in Output records to indicate that the output
21627 * to indicate that the output has been completely written. When
21773 * This field is used in Output records to indicate that the output
21775 * to indicate that the output has been completely written. When
21963 * This field is used in Output records to indicate that the output
21965 * to indicate that the output has been completely written. When
22129 * to indicate the programmed upper 16 bits.
22147 * This field is used in Output records to indicate that the output
22149 * to indicate that the output has been completely written. When
22234 * This field is used in Output records to indicate that the output
22236 * to indicate that the output has been completely written. When
22378 * This field is used in Output records to indicate that the output
22380 * to indicate that the output has been completely written. When
22475 * This field is used in Output records to indicate that the output
22477 * to indicate that the output has been completely written. When
22550 * This field is used in Output records to indicate that the output
22552 * to indicate that the output has been completely written. When
22616 * This field is used in Output records to indicate that the output
22618 * to indicate that the output has been completely written. When
22684 * This field is used in Output records to indicate that the output
22686 * to indicate that the output has been completely written. When
22813 * This field is used in Output records to indicate that the output
22815 * to indicate that the output has been completely written. When
22900 * This field is used in Output records to indicate that the
22902 * read as '1' to indicate that the output has been completely
23158 * This field is used in Output records to indicate that the
23160 * read as '1' to indicate that the output has been completely
23444 * This field is used in Output records to indicate that the
23446 * read as '1' to indicate that the output has been completely
23872 * This field is used in Output records to indicate that the
23874 * read as '1' to indicate that the output has been completely
23965 * This field is used in Output records to indicate that the output
23967 * to indicate that the output has been completely written.
24152 * This field is used in Output records to indicate that the output
24154 * to indicate that the output has been completely written.
24213 * This field is used in Output records to indicate that the output
24215 * to indicate that the output has been completely written.
24308 * This field is used in Output records to indicate that the output
24310 * to indicate that the output has been completely written. When
24378 * This field is used in Output records to indicate that the output
24380 * to indicate that the output has been completely written.
24483 * This field is used in Output records to indicate that the output
24485 * to indicate that the output has been completely written. When
24565 * This field is used in Output records to indicate that the output
24567 * to indicate that the output has been completely written. When
24715 * This field is used in Output records to indicate that the output
24717 * to indicate that the output has been completely written. When
24862 * This field is used in Output records to indicate that the output
24864 * to indicate that the output has been completely written. When
24925 * This field is used in Output records to indicate that the output
24927 * to indicate that the output has been completely written. When
25056 * This field is used in Output records to indicate that the output
25058 * to indicate that the output has been completely written. When
25228 * This field is used in Output records to indicate that the output
25230 * to indicate that the output has been completely written. When
25368 * This field is used in Output records to indicate that the output
25370 * to indicate that the output has been completely written. When
25461 * This field is used in Output records to indicate that the output
25463 * to indicate that the output has been completely written. When
25585 * This field is used in Output records to indicate that the output
25587 * to indicate that the output has been completely written. When
25661 * This field is used in Output records to indicate that the output
25663 * to indicate that the output has been completely written. When
25771 * This field is used in Output records to indicate that the output
25773 * to indicate that the output has been completely written. When
25894 * This field is used in Output records to indicate that the output
25896 * to indicate that the output has been completely written. When
25948 * this bit cleared to indicate that the IF state is not UP.
25993 * This field is used in Output records to indicate that the output
25995 * to indicate that the output has been completely written. When
26184 * This field is used in Output records to indicate that the output
26186 * to indicate that the output has been completely written. When
26381 * This field is used in Output records to indicate that the output
26383 * to indicate that the output has been completely written. When
26541 * This field is used in Output records to indicate that the output
26543 * to indicate that the output has been completely written. When
27024 * Validity bit, set to 1 to indicate other bits in mgmt_flags are
27279 * This field is used in Output records to indicate that the output
27281 * to indicate that the output has been completely written. When
27456 * This value is used to indicate the current
28274 * This field is used to indicate the reasons for link down.
28389 * This field is indicate the number of lanes used to transfer
28395 * This field is used in Output records to indicate that the output
28397 * to indicate that the output has been completely written. When
28856 * This field is used in Output records to indicate that the output
28858 * to indicate that the output has been completely written. When
28968 * are used to indicate configured CoS mappings.
29151 * This field is used in Output records to indicate that the output
29153 * to indicate that the output has been completely written. When
29214 * are used to indicate configured PTP capabilities.
29297 * This field is used in Output records to indicate that the output
29299 * to indicate that the output has been completely written. When
29739 * This field is used in Output records to indicate that the output
29741 * to indicate that the output has been completely written. When
30574 * This field is used in Output records to indicate that the output
30576 * to indicate that the output has been completely written. When
30652 * This field is used in Output records to indicate that the output
30654 * to indicate that the output has been completely written. When
30740 * This field is used in Output records to indicate that the output
30742 * to indicate that the output has been completely written.
30857 * This field is used in Output records to indicate that the output
30859 * to indicate that the output has been completely written. When
30872 * Or, if the driver requested counter masks, a mask to indicate the size
30878 * Or, if the driver requested counter masks, a mask to indicate the size
30884 * Or, if the driver requested counter masks, a mask to indicate the size
30890 * Or, if the driver requested counter masks, a mask to indicate the size
30896 * Or, if the driver requested counter masks, a mask to indicate the size
30902 * Or, if the driver requested counter masks, a mask to indicate the size
30908 * Or, if the driver requested counter masks, a mask to indicate the size
30914 * Or, if the driver requested counter masks, a mask to indicate the size
30986 * This field is used in Output records to indicate that the output
30988 * to indicate that the output has been completely written. When
31049 * This field is used in Output records to indicate that the output
31051 * to indicate that the output has been completely written. When
31175 * This field is used in Output records to indicate that the output
31177 * to indicate that the output has been completely written. When
31307 * This is a bit mask to indicate what speeds are supported
31342 * This is a bit mask to indicate what speeds are supported
31377 * This is a bit mask to indicate what speeds are supported
31480 * This is a bit mask to indicate what speeds are supported
31516 * This is a bit mask to indicate what speeds are supported
31553 * This field is used in Output records to indicate that the output
31555 * to indicate that the output has been completely written. When
31644 * This field is used in Output records to indicate that the output
31646 * to indicate that the output has been completely written. When
31735 * This field is used in Output records to indicate that the output
31737 * to indicate that the output has been completely written. When
31814 * This field is used in Output records to indicate that the output
31816 * to indicate that the output has been completely written. When
31893 * This field is used in Output records to indicate that the output
31895 * to indicate that the output has been completely written. When
32287 * This field is used in Output records to indicate that the output
32289 * to indicate that the output has been completely written. When
32583 * This field is used in Output records to indicate that the output
32585 * to indicate that the output has been completely written. When
32901 * This field is used in Output records to indicate that the output
32903 * to indicate that the output has been completely written. When
33051 /* This field is used in Output records to indicate the output format */
33061 * This field is used in Output records to indicate that the output
33063 * to indicate that the output has been completely written. When
33249 * This field is used in Output records to indicate that the output
33251 * to indicate that the output has been completely written. When
33378 * This field is used in Output records to indicate that the output
33380 * to indicate that the output has been completely written. When
33493 * This field is used in Output records to indicate that the output
33495 * to indicate that the output has been completely written. When
33577 * This field is used in Output records to indicate that the output
33579 * to indicate that the output has been completely written. When
33648 * This field is used in Output records to indicate that the output
33650 * to indicate that the output has been completely written. When
33737 * This field is used in Output records to indicate that the output
33739 * to indicate that the output has been completely written. When
33825 * This field is used in Output records to indicate that the output
33827 * to indicate that the output has been completely written. When
33970 * This field is used in output records to indicate that the output
33972 * to indicate that the output has been completely written.
34130 * This field is used in output records to indicate that the output
34132 * to indicate that the output has been completely written.
34208 * This field is used in Output records to indicate that the output
34210 * to indicate that the output has been completely written. When
34289 * This field is used in Output records to indicate that the output
34291 * to indicate that the output has been completely written. When
34364 * This field is used in Output records to indicate that the output
34366 * to indicate that the output has been completely written. When
34431 * This field is used in Output records to indicate that the output
34433 * to indicate that the output has been completely written. When
34498 * This field is used in Output records to indicate that the output
34500 * to indicate that the output has been completely written. When
35040 * This field is used in Output records to indicate that the output
35042 * to indicate that the output has been completely written. When
35137 * This field is used in Output records to indicate that the output
35139 * to indicate that the output has been completely written. When
35241 * This field is used in Output records to indicate that the output
35243 * to indicate that the output has been completely written. When
35341 * This field is used in Output records to indicate that the output
35343 * to indicate that the output has been completely written. When
35441 * This field is used in Output records to indicate that the output
35443 * to indicate that the output has been completely written. When
35592 * This field is used in Output records to indicate that the output
35594 * to indicate that the output has been completely written. When
35762 * This field is used in Output records to indicate that the output
35764 * to indicate that the output has been completely written. When
36535 * This field is used in Output records to indicate that the output
36537 * to indicate that the output has been completely written. When
37349 * This field is used in Output records to indicate that the output
37351 * to indicate that the output has been completely written. When
37421 * This field is used in Output records to indicate that the output
37423 * to indicate that the output has been completely written. When
37506 * This field is used in Output records to indicate that the output
37508 * to indicate that the output has been completely written. When
37601 * This field is used in Output records to indicate that the output
37603 * to indicate that the output has been completely written. When
37686 * This field is used in Output records to indicate that the output
37688 * to indicate that the output has been completely written. When
37809 * This field is used in Output records to indicate that the output
37811 * to indicate that the output has been completely written. When
37957 * This field is used in Output records to indicate that the output
37959 * to indicate that the output has been completely written. When
38029 * This field is used in Output records to indicate that the output
38031 * to indicate that the output has been completely written. When
38144 * This field is used in Output records to indicate that the output
38146 * to indicate that the output has been completely written. When
38292 * This field is used in Output records to indicate that the output
38294 * to indicate that the output has been completely written. When
38424 * This field is used in Output records to indicate that the output
38426 * to indicate that the output has been completely written. When
38567 * This field is used in Output records to indicate that the output
38569 * to indicate that the output has been completely written. When
38757 * This field is used in Output records to indicate that the output
38759 * to indicate that the output has been completely written. When
38953 * This field is used in Output records to indicate that the output
38955 * to indicate that the output has been completely written. When
39078 * This field is used in Output records to indicate that the output
39080 * to indicate that the output has been completely written. When
39207 * This field is used in Output records to indicate that the output
39209 * to indicate that the output has been completely written. When
39470 * This field is used in Output records to indicate that the output
39472 * to indicate that the output has been completely written. When
39605 * This field is used in Output records to indicate that the output
39607 * to indicate that the output has been completely written. When
39770 * This field is used in Output records to indicate that the output
39772 * to indicate that the output has been completely written. When
39881 * This field is used in Output records to indicate that the output
39883 * to indicate that the output has been completely written. When
40014 * This field is used in Output records to indicate that the output
40016 * to indicate that the output has been completely written. When
40076 * This field is used in Output records to indicate that the output
40078 * to indicate that the output has been completely written. When
40146 * This field is used in Output records to indicate that the output
40148 * to indicate that the output has been completely written. When
40211 * This field is used in Output records to indicate that the output
40213 * to indicate that the output has been completely written. When
40292 * This field is used in Output records to indicate that the output
40294 * to indicate that the output has been completely written. When
40404 * This field is used in Output records to indicate that the output
40406 * to indicate that the output has been completely written.
40468 * This field is used in Output records to indicate that the output
40470 * to indicate that the output has been completely written. When
40762 * This field is used in Output records to indicate that the output
40764 * to indicate that the output has been completely written. When
40920 * association is valid. Otherwise it will return 0xFFFF to indicate no
40995 * This field is used in Output records to indicate that the output
40997 * to indicate that the output has been completely written. When
41265 * This field is used in Output records to indicate that the output
41267 * to indicate that the output has been completely written. When
41561 * This field is used in Output records to indicate that the output
41563 * to indicate that the output has been completely written. When
41818 * This field is used in Output records to indicate that the output
41820 * to indicate that the output has been completely written. When
42076 * This field is used in Output records to indicate that the output
42078 * to indicate that the output has been completely written. When
42319 * This field is used in Output records to indicate that the output
42321 * to indicate that the output has been completely written. When
42501 * This field is used in Output records to indicate that the output
42503 * to indicate that the output has been completely written.
42646 * This field is used in Output records to indicate that the output
42648 * to indicate that the output has been completely written.
42709 * This field is used in Output records to indicate that the output
42711 * to indicate that the output has been completely written. When
42772 * This field is used in Output records to indicate that the output
42774 * to indicate that the output has been completely written. When
43147 * Indicate the TX ring alloc MPC channel type is a MPC channel
43152 * Indicate the RX ring alloc MPC channel type is a MPC channel
43157 * Indicate the RX ring alloc MPC channel type is a MPC channel
43162 * Indicate the RX ring alloc MPC channel type is a MPC channel
43167 * Indicate the RX ring alloc MPC channel type is a MPC channel
43212 * This field is used in Output records to indicate that the output
43214 * to indicate that the output has been completely written. When
43317 * This field is used in Output records to indicate that the output
43319 * to indicate that the output has been completely written. When
43413 * This field is used in Output records to indicate that the output
43415 * to indicate that the output has been completely written. When
43568 * This field is used in Output records to indicate that the output
43570 * to indicate that the output has been completely written.
43708 * This field is used in Output records to indicate that the output
43710 * to indicate that the output has been completely written.
43851 * This field is used in Output records to indicate that the output
43853 * to indicate that the output has been completely written. When
43967 * This field is used in Output records to indicate that the output
43969 * to indicate that the output has been completely written. When
44117 * This field is used in Output records to indicate that the output
44119 * to indicate that the output has been completely written. When
44204 * This field is used in Output records to indicate that the output
44206 * to indicate that the output has been completely written. When
44267 * This field is used in Output records to indicate that the output
44269 * to indicate that the output has been completely written. When
44739 * This field is used in Output records to indicate that the output
44741 * to indicate that the output has been completely written. When
44894 * This field is used in Output records to indicate that the output
44896 * to indicate that the output has been completely written. When
44957 * This field is used in Output records to indicate that the output
44959 * to indicate that the output has been completely written. When
45073 * Setting this flag to 1 indicate the L2 fields in this command
45074 * pertain to source fields. Setting this flag to 0 indicate the
45377 * shall indicate no valid flow id.
45380 /* Indicate the flow id value. */
45383 /* Indicate type of the flow. */
45396 /* Indicate the flow direction. */
45405 * This field is used in Output records to indicate that the output
45407 * to indicate that the output has been completely written.
45471 * This field is used in Output records to indicate that the output
45473 * to indicate that the output has been completely written.
45634 * This field is used in Output records to indicate that the output
45636 * to indicate that the output has been completely written.
45811 * This field is used in Output records to indicate that the output
45813 * to indicate that the output has been completely written.
45905 * This field is used in Output records to indicate that the output
45907 * to indicate that the output has been completely written.
45988 * This field is used in Output records to indicate that the output
45990 * to indicate that the output has been completely written.
46177 * tunnel_flags allows the user to indicate the tunnel tag detection
46245 * shall indicate no valid flow id.
46248 /* Indicate the flow id value. */
46251 /* Indicate type of the flow. */
46264 /* Indicate the flow direction. */
46273 * This field is used in Output records to indicate that the output
46275 * to indicate that the output has been completely written.
46336 * This field is used in Output records to indicate that the output
46338 * to indicate that the output has been completely written.
46446 * This field is used in Output records to indicate that the output
46448 * to indicate that the output has been completely written.
46549 * This field is used in Output records to indicate that the output
46551 * to indicate that the output has been completely written.
46654 * This field is used in Output records to indicate that the output
46656 * to indicate that the output has been completely written.
46872 * This field is used in Output records to indicate that the output
46874 * to indicate that the output has been completely written.
46936 * This field is used in Output records to indicate that the output
46938 * to indicate that the output has been completely written.
47319 * shall indicate no valid flow id.
47322 /* Indicate the flow id value. */
47325 /* Indicate type of the flow. */
47338 /* Indicate the flow direction. */
47347 * This field is used in Output records to indicate that the output
47349 * to indicate that the output has been completely written.
47426 * This field is used in Output records to indicate that the output
47428 * to indicate that the output has been completely written.
47551 * This field is used in Output records to indicate that the output
47553 * to indicate that the output has been completely written.
47899 * shall indicate no valid flow id.
47902 /* Indicate the flow id value. */
47905 /* Indicate type of the flow. */
47918 /* Indicate the flow direction. */
47927 * This field is used in Output records to indicate that the output
47929 * to indicate that the output has been completely written.
47990 * This field is used in Output records to indicate that the output
47992 * to indicate that the output has been completely written.
48095 * This field is used in Output records to indicate that the output
48097 * to indicate that the output has been completely written.
48210 * This field is used in Output records to indicate that the output
48212 * to indicate that the output has been completely written.
48422 * This field is used in Output records to indicate that the output
48424 * to indicate that the output has been completely written.
48505 * This field is used in Output records to indicate that the output
48507 * to indicate that the output has been completely written.
48712 * This field is used in Output records to indicate that the output
48714 * to indicate that the output has been completely written.
48803 * This field is used in Output records to indicate that the output
48805 * to indicate that the output has been completely written.
48894 * This field is used in Output records to indicate that the output
48896 * to indicate that the output has been completely written.
48977 * This field is used in Output records to indicate that the output
48979 * to indicate that the output has been completely written.
49272 * This field is used in Output records to indicate that the output
49274 * to indicate that the output has been completely written.
49336 * This field is used in Output records to indicate that the output
49338 * to indicate that the output has been completely written.
49408 * indicate a VM to VM flow, both of the path_tx and path_rx flags
49412 * FID belong to the children VFs of the same PF to indicate VM to
49422 * Set to 1 to indicate matching of VXLAN VNI from the custom vxlan
49429 * Set to 1 to indicate vhost_id is specified in the outer_vlan_tci
49619 * shall indicate no valid flow id.
49622 /* Indicate the flow id value. */
49625 /* Indicate type of the flow. */
49638 /* Indicate the flow direction. */
49650 * This field is used in Output records to indicate that the output
49652 * to indicate that the output has been completely written.
49750 * This field is used in Output records to indicate that the output
49752 * to indicate that the output has been completely written.
50088 * This field is used in Output records to indicate that the output
50090 * to indicate that the output has been completely written.
50137 * Set to 1 to indicate the page size, page layers, and
50145 * Set to 1 to indicate flow flush operation to cleanup all the
50152 * Set to 1 to indicate flow flush operation to cleanup all the
50158 * Set to 1 to indicate the flow counter IDs are included in the
50224 * This field is used in Output records to indicate that the output
50226 * to indicate that the output has been completely written.
50417 * This field is used in Output records to indicate that the output
50419 * to indicate that the output has been completely written.
50488 * This field is used in Output records to indicate that the output
50490 * to indicate that the output has been completely written.
50647 * This field is used in Output records to indicate that the output
50649 * to indicate that the output has been completely written.
50752 * This field is used in Output records to indicate that the output
50754 * to indicate that the output has been completely written.
50843 * This field is used in Output records to indicate that the output
50845 * to indicate that the output has been completely written.
50918 * This field is used in Output records to indicate that the output
50920 * to indicate that the output has been completely written.
50986 * This field is used in Output records to indicate that the output
50988 * to indicate that the output has been completely written.
51049 * This field is used in Output records to indicate that the output
51051 * to indicate that the output has been completely written.
51138 * This field is used in Output records to indicate that the output
51140 * to indicate that the output has been completely written.
51307 * This field is used in Output records to indicate that the output
51309 * to indicate that the output has been completely written.
51412 * This field is used in Output records to indicate that the output
51414 * to indicate that the output has been completely written.
51543 * This field is used in Output records to indicate that the output
51545 * to indicate that the output has been completely written.
51618 * This field is used in Output records to indicate that the output
51620 * to indicate that the output has been completely written.
51689 * This field is used in Output records to indicate that the output
51691 * to indicate that the output has been completely written.
51791 * This field is used in Output records to indicate that the output
51793 * to indicate that the output has been completely written.
51892 * This field is used in Output records to indicate that the output
51894 * to indicate that the output has been completely written.
51959 * This field is used in Output records to indicate that the output
51961 * to indicate that the output has been completely written.
52061 * This field is used in Output records to indicate that the output
52063 * to indicate that the output has been completely written.
52127 * This field is used in Output records to indicate that the output
52129 * to indicate that the output has been completely written.
52262 * This field is used in Output records to indicate that the output
52264 * to indicate that the output has been completely written.
52363 * This field is used in Output records to indicate that the output
52365 * to indicate that the output has been completely written.
52447 * This field is used in Output records to indicate that the output
52449 * to indicate that the output has been completely written.
52524 * This field is used in Output records to indicate that the output
52526 * to indicate that the output has been completely written.
52676 * This field is used in Output records to indicate that the output
52678 * to indicate that the output has been completely written.
52780 * This field is used in Output records to indicate that the output
52782 * to indicate that the output has been completely written.
52866 * This field is used in Output records to indicate that the output
52868 * to indicate that the output has been completely written.
52965 * This field is used in Output records to indicate that the output
52967 * to indicate that the output has been completely written.
53027 * Value of 1 to indicate firmware support 16-bit flow handle.
53028 * Value of 0 to indicate firmware not support 16-bit flow handle.
53032 * Value of 1 to indicate firmware support 64-bit flow handle.
53033 * Value of 0 to indicate firmware not support 64-bit flow handle.
53037 * Value of 1 to indicate firmware support flow batch delete
53039 * Value of 0 to indicate that the firmware does not support flow
53044 * Value of 1 to indicate that the firmware support flow reset all
53051 * Value of 1 to indicate that firmware supports use of FID as
53058 * Value of 1 to indicate that firmware supports TX EEM flows.
53064 * Value of 1 to indicate that firmware supports RX EEM flows.
53070 * Value of 1 to indicate that firmware supports the dynamic
53078 * Value of 1 to indicate that firmware supports setting of
53084 * Value of 1 to indicate that firmware supports untagged matching
53090 * Value of 1 to indicate that firmware supports XDP filter. Value
53095 * Value of 1 to indicate that the firmware support L2 header source
53109 * Value of 1 to indicate that firmware supports setting of
53156 * Value of 1 to indicate that firmware supports setting of
53163 * This field is used in Output records to indicate that the output
53165 * to indicate that the output has been completely written.
53241 * This field is used in Output records to indicate that the output
53243 * to indicate that the output has been completely written.
53332 * This field is used in Output records to indicate that the output
53334 * to indicate that the output has been completely written.
53396 * This field is used in Output records to indicate that the output
53398 * to indicate that the output has been completely written.
53600 * shall indicate no valid flow id.
53603 /* Indicate the flow id value. */
53606 /* Indicate type of the flow. */
53619 /* Indicate the flow direction. */
53628 * This field is used in Output records to indicate that the output
53630 * to indicate that the output has been completely written.
53691 * This field is used in Output records to indicate that the output
53693 * to indicate that the output has been completely written.
53778 * This field is used in Output records to indicate that the output
53780 * to indicate that the output has been completely written.
53856 * This field is used in Output records to indicate that the
53858 * read as '1' to indicate that the output has been
53924 * This field is used to indicate device's capabilities and
53931 * This field is used in Output records to indicate that the output
53933 * to indicate that the output has been completely written.
54024 * This field is used in Output records to indicate that the output
54026 * to indicate that the output has been completely written.
54105 * This field is used in Output records to indicate that the output
54107 * to indicate that the output has been completely written.
54177 * This field is used in Output records to indicate that the output
54179 * to indicate that the output has been completely written.
54243 * This field is used in Output records to indicate that the output
54245 * to indicate that the output has been completely written.
54350 * This field is used in Output records to indicate that the output
54352 * to indicate that the output has been completely written.
54464 * This field is used in Output records to indicate that the output
54466 * to indicate that the output has been completely written.
54564 * This field is used in Output records to indicate that the output
54566 * to indicate that the output has been completely written.
54649 * This field is used in Output records to indicate that the output
54651 * to indicate that the output has been completely written.
54749 * This field is used in Output records to indicate that the output
54751 * to indicate that the output has been completely written.
54870 * This field is used in Output records to indicate that the output
54872 * to indicate that the output has been completely written.
54976 * This field is used in Output records to indicate that the output
54978 * to indicate that the output has been completely written.
55033 /* Indicate table data is being sent via DMA. */
55077 * This field is used in Output records to indicate that the output
55079 * to indicate that the output has been completely written.
55172 * This field is used in Output records to indicate that the output
55174 * to indicate that the output has been completely written.
55263 * This field is used in Output records to indicate that the output
55265 * to indicate that the output has been completely written.
55356 * This field is used in Output records to indicate that the output
55358 * to indicate that the output has been completely written.
55441 * This field is used in Output records to indicate that the output
55443 * to indicate that the output has been completely written.
55524 * This field is used in Output records to indicate that the output
55526 * to indicate that the output has been completely written.
55582 * Indicate device data is being sent via DMA, the device
55627 * This field is used in Output records to indicate that the
55629 * read as '1' to indicate that the output has been
55724 * This field is used in Output records to indicate that the
55726 * read as '1' to indicate that the output has been
55808 * This field is used in Output records to indicate that the
55810 * read as '1' to indicate that the output has been
55892 * This field is used in Output records to indicate that the
55894 * read as '1' to indicate that the output has been
55949 /* Indicate device data is being sent via DMA. */
55979 * This field is used in Output records to indicate that the
55981 * read as '1' to indicate that the output has been
56066 * This field is used in Output records to indicate that the output
56068 * to indicate that the output has been completely written.
56156 * This field is used in Output records to indicate that the output
56158 * to indicate that the output has been completely written.
56244 * This field is used in Output records to indicate that the output
56246 * to indicate that the output has been completely written.
56341 * This field is used in Output records to indicate that the output
56343 * to indicate that the output has been completely written.
56416 * This field is used in Output records to indicate that the output
56418 * to indicate that the output has been completely written.
56495 * This field is used in Output records to indicate that the output
56497 * to indicate that the output has been completely written.
56552 /* Indicate table data is being sent via DMA. */
56594 * This field is used in Output records to indicate that the output
56596 * to indicate that the output has been completely written.
56697 * This field is used in Output records to indicate that the output
56699 * to indicate that the output has been completely written.
56780 * This field is used in Output records to indicate that the output
56782 * to indicate that the output has been completely written.
56889 * This field is used in Output records to indicate that the output
56891 * to indicate that the output has been completely written.
57000 * This field is used in Output records to indicate that the output
57002 * to indicate that the output has been completely written.
57067 * This field is used in Output records to indicate that the output
57069 * to indicate that the output has been completely written.
57145 * This field is used in Output records to indicate that the output
57147 * to indicate that the output has been completely written.
57223 * This field is used in Output records to indicate that the output
57225 * to indicate that the output has been completely written.
57308 * This field is used in Output records to indicate that the output
57310 * to indicate that the output has been completely written.
57392 * This field is used in Output records to indicate that the output
57394 * to indicate that the output has been completely written.
57479 * This field is used in Output records to indicate that the output
57481 * to indicate that the output has been completely written.
57592 * This field is used in Output records to indicate that the output
57594 * to indicate that the output has been completely written.
57690 * This field is used in Output records to indicate that the output
57692 * to indicate that the output has been completely written.
57811 * This field is used in Output records to indicate that the output
57813 * to indicate that the output has been completely written.
57882 * Indicate device data is being sent via DMA, the device
57948 * This field is used in Output records to indicate that the output
57950 * to indicate that the output has been completely written.
58004 * Indicate device data is being sent via DMA, the device
58070 * This field is used in Output records to indicate that the output
58072 * to indicate that the output has been completely written.
58189 * This field is used in Output records to indicate that the output
58191 * to indicate that the output has been completely written.
58294 * This field is used in Output records to indicate that the output
58296 * to indicate that the output has been completely written.
58426 * This field is used in Output records to indicate that the output
58428 * to indicate that the output has been completely written.
58501 /* Indicate device data is being sent via DMA. */
58533 * This field is used in Output records to indicate that the
58535 * read as '1' to indicate that the output has been
58636 * This field is used in Output records to indicate that the
58638 * read as '1' to indicate that the output has been
58747 * This field is used in Output records to indicate that the output
58749 * to indicate that the output has been completely written.
58802 /* Indicate device data is being sent via DMA. */
58866 * This field is used in Output records to indicate that the output
58868 * to indicate that the output has been completely written.
58958 * This field is used in Output records to indicate that the output
58960 * to indicate that the output has been completely written.
59046 * This field is used in Output records to indicate that the output
59048 * to indicate that the output has been completely written.
59158 * This field is used in Output records to indicate that the output
59160 * to indicate that the output has been completely written.
59227 * This field is used in Output records to indicate that the output
59229 * to indicate that the output has been completely written.
59323 * This field is used in Output records to indicate that the output
59325 * to indicate that the output has been completely written.
59490 * This field is used in Output records to indicate that the output
59492 * to indicate that the output has been completely written. When
59656 * This field is used in Output records to indicate that the output
59658 * to indicate that the output has been completely written. When
59786 * This field is used in Output records to indicate that the output
59788 * to indicate that the output has been completely written. When
60069 * This field is used in Output records to indicate that the output
60071 * to indicate that the output has been completely written. When
60134 * This field is used in Output records to indicate that the output
60136 * to indicate that the output has been completely written. When
60244 * This field is used in Output records to indicate that the output
60246 * to indicate that the output has been completely written. When
60358 * This field is used in Output records to indicate that the output
60360 * to indicate that the output has been completely written. When
60462 * This field is used in Output records to indicate that the output
60464 * to indicate that the output has been completely written. When
60525 * This field is used in Output records to indicate that the output
60527 * to indicate that the output has been completely written. When
60599 * This field is used in Output records to indicate that the output
60601 * to indicate that the output has been completely written. When
60719 * This field is used in Output records to indicate that the output
60721 * to indicate that the output has been completely written.
60915 * This field is used in Output records to indicate that the output
60917 * to indicate that the output has been completely written.
61011 * Indicate which host is being reset. 0 means first host.
61058 * This field is used in Output records to indicate that the output
61060 * to indicate that the output has been completely written. When
61168 * This field is used in Output records to indicate that the output
61170 * to indicate that the output has been completely written. When
61254 * This field is used in Output records to indicate that the output
61256 * to indicate that the output has been completely written. When
61339 * This field is used in Output records to indicate that the output
61341 * to indicate that the output has been completely written. When
61947 * This field is used in Output records to indicate that the output
61949 * to indicate that the output has been completely written. When
62072 * This field is used in Output records to indicate that the output
62074 * to indicate that the output has been completely written. When
62200 * This field is used in Output records to indicate that the output
62202 * to indicate that the output has been completely written. When
62272 * This field is used in Output records to indicate that the output
62274 * to indicate that the output has been completely written. When
62362 * This field is used in Output records to indicate that the output
62364 * to indicate that the output has been completely written. When
62425 * This field is used in Output records to indicate that the output
62427 * to indicate that the output has been completely written. When
62583 * This field is used in Output records to indicate that the output
62585 * to indicate that the output has been completely written. When
62666 * This field is used in Output records to indicate that the output
62668 * to indicate that the output has been completely written. When
62764 * This field is used in Output records to indicate that the output
62766 * to indicate that the output has been completely written. When
62959 * field will indicate if it completed successfully or with
62965 * This field is used in Output records to indicate that the output
62967 * to indicate that the output has been completely written. When
63066 * This field is used in Output records to indicate that the output
63068 * to indicate that the output has been completely written. When
63149 * This field is used in Output records to indicate that the output
63151 * indicate that the output has been completely written. When
63214 * This field is used in Output records to indicate that the output
63216 * to indicate that the output has been completely written. When
63335 * This field is used in Output records to indicate that the output
63337 * to indicate that the output has been completely written. When
63454 * This field is used in Output records to indicate that the output
63456 * to indicate that the output has been completely written. When
63581 * This field is used in Output records to indicate that the output
63583 * to indicate that the output has been completely written.
63658 * This field is used in Output records to indicate that the output
63660 * to indicate that the output has been completely written. When
63734 * This field is used in Output records to indicate that the output
63736 * to indicate that the output has been completely written. When
63825 * This field is used in Output records to indicate that the output
63827 * to indicate that the output has been completely written. When
63897 * This field is used in Output records to indicate that the output
63899 * to indicate that the output has been completely written. When
64003 * indicate a temperature range from -64 to +191. The actual
64012 * indicate a temperature range from -64 to +191. The actual
64021 * indicate a temperature range from -64 to +191. The actual
64051 * This field is used in Output records to indicate that the output
64053 * to indicate that the output has been completely written. When
64127 * This field is used in Output records to indicate that the output
64129 * to indicate that the output has been completely written. When
64189 * This field is used in Output records to indicate that the output
64191 * to indicate that the output has been completely written. When
64305 * This field is used in Output records to indicate that the output
64307 * to indicate that the output has been completely written. When
64517 * This field is used in Output records to indicate that the output
64519 * to indicate that the output has been completely written. When
64600 * This field is used in Output records to indicate that the output
64602 * to indicate that the output has been completely written. When
64761 * This field is used in Output records to indicate that the output
64763 * to indicate that the output has been completely written. When
64855 * This field is used in Output records to indicate that the output
64857 * to indicate that the output has been completely written. When
64930 * This field is used in Output records to indicate that the output
64932 * to indicate that the output has been completely written. When
64996 * This field is used in Output records to indicate that the output
64998 * to indicate that the output has been completely written. When
65133 * This field is used in Output records to indicate that the output
65135 * to indicate that the output has been completely written. When
65254 * This field is used in Output records to indicate that the output
65256 * to indicate that the output has been completely written. When
65327 * Handle used to indicate availability of additional
65342 * This field is used in Output records to indicate that the output
65344 * to indicate that the output has been completely written. When
65414 * This field is used in Output records to indicate that the output
65416 * to indicate that the output has been completely written. When
65515 * This field is used in Output records to indicate that the output
65517 * to indicate that the output has been completely written. When
65660 * This field is used in Output records to indicate that the output
65662 * to indicate that the output has been completely written. When
65738 * This field is used in Output records to indicate that the output
65740 * to indicate that the output has been completely written. When
65850 * This field is used in Output records to indicate that the output
65852 * to indicate that the output has been completely written. When
65997 * This field is used in Output records to indicate that the output
65999 * to indicate that the output has been completely written. When
66108 * This field is used in Output records to indicate that the output
66110 * to indicate that the output has been completely written. When
66135 /* This field is used to indicate the segment is compressed. */
66229 * This field is used in Output records to indicate that the output
66231 * to indicate that the output has been completely written. When
66314 * This field is used in Output records to indicate that the output
66316 * to indicate that the output has been completely written. When
66434 * This field is used in Output records to indicate that the output
66436 * to indicate that the output has been completely written. When
66539 * This field is used in Output records to indicate that the output
66541 * to indicate that the output has been completely written. When
66613 * This field is used in Output records to indicate that the output
66615 * to indicate that the output has been completely written. When
66702 * This field is used in Output records to indicate that the output
66704 * to indicate that the output has been completely written. When
66783 * This field is used in Output records to indicate that the output
66785 * to indicate that the output has been completely written. When
66875 * This field is used in Output records to indicate that the output
66877 * to indicate that the output has been completely written. When
66957 * This field is used in Output records to indicate that the output
66959 * to indicate that the output has been completely written. When
67044 * This field is used in Output records to indicate that the output
67046 * to indicate that the output has been completely written. When
67240 * This field is used in Output records to indicate that the output
67242 * to indicate that the output has been completely written. When
67342 * This field is used in Output records to indicate that the output
67344 * to indicate that the output has been completely written. When
67469 * This field is used in Output records to indicate that the output
67471 * to indicate that the output has been completely written. When
67565 * This field is used in Output records to indicate that the output
67567 * to indicate that the output has been completely written. When
67666 * This field is used in Output records to indicate that the output
67668 * to indicate that the output has been completely written. When
67880 * This field is used in Output records to indicate that the output
67882 * to indicate that the output has been completely written. When
67940 * This field is used in Output records to indicate that the output
67942 * to indicate that the output has been completely written. When
68008 * This field is used in Output records to indicate that the output
68010 * to indicate that the output has been completely written. When
68114 * This field is used in Output records to indicate that the output is
68116 * indicate that the output has been completely written. When writing
68197 * This field is used in Output records to indicate that the output
68199 * to indicate that the output has been completely written. When
68270 * This field is used in Output records to indicate that the output
68272 * to indicate that the output has been completely written. When
68349 * This field is used in Output records to indicate that the output
68351 * to indicate that the output has been completely written. When
68414 * This field is used in Output records to indicate that the output
68416 * to indicate that the output has been completely written. When
68478 * This field is used in Output records to indicate that the output
68480 * to indicate that the output has been completely written. When
68630 * This field is used in Output records to indicate that the output
68632 * to indicate that the output has been completely written. When
68740 * This field is used in Output records to indicate that the output
68742 * to indicate that the output has been completely written. When
68844 * This field is used in Output records to indicate that the output
68846 * to indicate that the output has been completely written. When
68907 * This field is used in Output records to indicate that the output
68909 * to indicate that the output has been completely written. When
69114 * This field is used in Output records to indicate that the output
69116 * to indicate that the output has been completely written. When
69202 * This field is used in Output records to indicate that the output
69204 * to indicate that the output has been completely written. When
69280 * This field is used in Output records to indicate that the output
69282 * to indicate that the output has been completely written. When
69483 * This field is used in Output records to indicate that the output
69485 * to indicate that the output has been completely written. When
69565 * This field is used in Output records to indicate that the output
69567 * to indicate that the output has been completely written. When
69695 * This field is used in Output records to indicate that the output
69697 * to indicate that the output has been completely written. When
69828 * This field is used in Output records to indicate that the output
69830 * to indicate that the output has been completely written. When
69949 * This field is used in Output records to indicate that the output
69951 * to indicate that the output has been completely written. When
70060 * This field is used in Output records to indicate that the output
70062 * to indicate that the output has been completely written. When
70150 * This field is used in Output records to indicate that the output
70152 * to indicate that the output has been completely written. When
70214 * This field is used in Output records to indicate that the output
70216 * to indicate that the output has been completely written. When
70303 * This field is used in Output records to indicate that the output
70305 * to indicate that the output has been completely written. When
70379 * This field is used in Output records to indicate that the output
70381 * to indicate that the output has been completely written. When
70612 * record in 16B units. Even values indicate 16B
70613 * records. Odd values indicate 32B
71053 * record in 16B units. Even values indicate 16B
71054 * records. Odd values indicate 32B
71463 * record in 16B units. Even values indicate 16B
71464 * records. Odd values indicate 32B
71525 * record in 16B units. Even values indicate 16B
71526 * records. Odd values indicate 32B
71829 * record in 16B units. Even values indicate 16B
71830 * records. Odd values indicate 32B
71903 * record in 16B units. Even values indicate 16B
71904 * records. Odd values indicate 32B
72234 * record in 16B units. Even values indicate 16B
72235 * records. Odd values indicate 32B
72319 * record in 16B units. Even values indicate 16B
72320 * records. Odd values indicate 32B
72558 * record in 16B units. Even values indicate 16B
72559 * records. Odd values indicate 32B
72891 * record in 16B units. Even values indicate 16B
72892 * records. Odd values indicate 32B
72957 * record in 16B units. Even values indicate 16B
72958 * records. Odd values indicate 32B
73031 * record in 16B units. Even values indicate 16B
73032 * records. Odd values indicate 32B
73238 * record in 16B units. Even values indicate 16B
73239 * records. Odd values indicate 32B
73304 * record in 16B units. Even values indicate 16B
73305 * records. Odd values indicate 32B
73422 * record in 16B units. Even values indicate 16B
73423 * records. Odd values indicate 32B
73531 * record in 16B units. Even values indicate 16B
73532 * records. Odd values indicate 32B
73630 * record in 16B units. Even values indicate 16B
73631 * records. Odd values indicate 32B
73718 * record in 16B units. Even values indicate 16B
73719 * records. Odd values indicate 32B
73851 /* Indicate Zero Based Virtual Address (ZBVA). */
73907 * record in 16B units. Even values indicate 16B
73908 * records. Odd values indicate 32B
73973 * record in 16B units. Even values indicate 16B
73974 * records. Odd values indicate 32B
74095 * record in 16B units. Even values indicate 16B
74096 * records. Odd values indicate 32B
74161 * record in 16B units. Even values indicate 16B
74162 * records. Odd values indicate 32B
74273 * record in 16B units. Even values indicate 16B
74274 * records. Odd values indicate 32B
74340 * record in 16B units. Even values indicate 16B
74341 * records. Odd values indicate 32B
74573 * record in 16B units. Even values indicate 16B
74574 * records. Odd values indicate 32B
74639 * record in 16B units. Even values indicate 16B
74640 * records. Odd values indicate 32B
74736 * record in 16B units. Even values indicate 16B
74737 * records. Odd values indicate 32B
74802 * record in 16B units. Even values indicate 16B
74803 * records. Odd values indicate 32B
74891 * record in 16B units. Even values indicate 16B
74892 * records. Odd values indicate 32B
75092 * record in 16B units. Even values indicate 16B
75093 * records. Odd values indicate 32B
75321 * record in 16B units. Even values indicate 16B
75322 * records. Odd values indicate 32B
75745 * record in 16B units. Even values indicate 16B
75746 * records. Odd values indicate 32B
75807 * record in 16B units. Even values indicate 16B
75808 * records. Odd values indicate 32B
75899 * record in 16B units. Even values indicate 16B
75900 * records. Odd values indicate 32B records.
75978 * record in 16B units. Even values indicate 16B
75979 * records. Odd values indicate 32B
76040 * record in 16B units. Even values indicate 16B
76041 * records. Odd values indicate 32B
77505 * record in 16B units. Even values indicate 16B
77506 * records. Odd values indicate 32B
77608 * record in 16B units. Even values indicate 16B
77609 * records. Odd values indicate 32B
77799 * record in 16B units. Even values indicate 16B
77800 * records. Odd values indicate 32B
77877 * record in 16B units. Even values indicate 16B
77878 * records. Odd values indicate 32B
77954 * record in 16B units. Even values indicate 16B
77955 * records. Odd values indicate 32B
78042 * record in 16B units. Even values indicate 16B
78043 * records. Odd values indicate 32B
78110 * record in 16B units. Even values indicate 16B
78111 * records. Odd values indicate 32B
78181 * record in 16B units. Even values indicate 16B
78182 * records. Odd values indicate 32B
78332 * record in 16B units. Even values indicate 16B
78333 * records. Odd values indicate 32B
78411 * record in 16B units. Even values indicate 16B
78412 * records. Odd values indicate 32B
78543 * record in 16B units. Even values indicate 16B
78544 * records. Odd values indicate 32B
79030 * record in 16B units. Even values indicate 16B
79031 * records. Odd values indicate 32B
79392 * Indicate that inline data is posted to the SQ in the data
79528 * Indicate that inline data is posted to the SQ in the data
79627 * Indicate that inline data is posted to the SQ in the data
79824 * Indicate that inline data is posted to the SQ in the data
80039 * Indicate that inline data is posted to the SQ following
80153 * Indicate that inline data is posted to the SQ following
80625 /* Indicate the MR is ZBVA (Zero Base VA) */
80868 /* Indicate the MR is ZBVA (Zero Base VA) */
81109 /* Indicate the MR is ZBVA (Zero Base VA) */
81356 /* Indicate the MR is ZBVA (Zero Base VA) */
81871 * Indicate that inline data is posted to the SQ in the data
82001 * Indicate that inline data is posted to the SQ in the data
82112 * Indicate that inline data is posted to the SQ in the data
82363 * Indicate that inline data is posted to the SQ in the data
82613 * Indicate that inline data is posted to the SQ in the data
82765 * Indicate that inline data is posted to the SQ in the data
82910 * Indicate that inline data is posted to the SQ following
83045 * Indicate that inline data is posted to the SQ following
84654 * Indicate valid completion - written by the chip. The NIC
84718 * NO_OP completion - This is used to indicate that no
84723 * Terminal completion - This is used to indicate that no
84894 * Indicate valid completion - written by the chip. Cumulus
84979 * Indicate valid completion - written by the chip. Cumulus
85085 * Indicate valid completion - written by the chip. Cumulus
85255 * Indicate valid completion - written by the chip. Cumulus
85457 * Indicate valid completion - written by the chip. Cumulus
85652 * Indicate valid completion - written by the chip. Cumulus
86146 * Indicate valid completion - written by the chip. Cumulus
86564 * Indicate valid completion - written by the chip. Cumulus
86663 * indicate that no further completions will be generated for this QP.
86687 * Indicate valid completion - written by the chip. Cumulus
86696 * Terminal completion - This is used to indicate that no
86719 * Indicate valid completion - written by the chip. The NIC
86764 * Indicate valid completion - written by the chip. The NIC
86773 * NO-OP completion - This is used to indicate that no operation
86789 * signaled SQ WQE. The sq_cons_idx and opaque is used to indicate
86820 * Indicate valid completion - written by the chip. The NIC
87005 * Indicate valid completion - written by the chip. The NIC
87166 * Indicate valid completion - written by the chip. The NIC
87638 * Indicate valid completion - written by the chip. The NIC
87809 * Indicate valid completion - written by the chip. The NIC
87976 * record in 16B units. Even values indicate 16B
87977 * records. Odd values indicate 32B
88023 * record in 16B units. Even values indicate 16B
88024 * records. Odd values indicate 32B
88073 * record in 16B units. Even values indicate 16B
88074 * records. Odd values indicate 32B records.
88126 * record in 16B units. Even values indicate 16B
88127 * records. Odd values indicate 32B
88193 * record in 16B units. Even values indicate 16B
88194 * records. Odd values indicate 32B records.
88486 * in the backup doorbell location at time zero to indicate that the
88681 * in the backup doorbell location at time zero to indicate that the
89156 * in the backup doorbell location at time zero to indicate that the
89361 * zero to indicate that it has not yet been written. The bit i
89460 * zero to indicate that it has not yet been written. The bit i
89630 * in the backup doorbell location at time zero to indicate that the
89873 * These bits indicate the status as being reported by the firmware.
89892 * block or in a software module. The lower 8 bits indicate a
89948 * This bit is used to indicate device state when it enters the
89976 * The SBL sets this bit to indicate whether manu_debug pin is
90002 * This field is to store the signature value to indicate the
90144 * This field is used in Output records to indicate that the output
90146 * to indicate that the output has been completely written. When
90269 * This field is used in Output records to indicate that the output
90271 * to indicate that the output has been completely written. When
90329 * This field is used in Output records to indicate that the output
90331 * to indicate that the output has been completely written. When
90541 * This field is used in Output records to indicate that the output
90543 * to indicate that the output has been completely written. When
90607 * This field is used in Output records to indicate that the output
90609 * to indicate that the output has been completely written. When
90686 * This field is used in Output records to indicate that the output
90688 * to indicate that the output has been completely written. When
90792 * This field is used in Output records to indicate that the output
90794 * to indicate that the output has been completely written. When
90909 * This field is used in Output records to indicate that the output
90911 * to indicate that the output has been completely written. When
90993 * This field is used in Output records to indicate that the output
90995 * to indicate that the output has been completely written. When
91069 * This field is used in Output records to indicate that the output
91071 * to indicate that the output has been completely written. When
91149 * This field is used in Output records to indicate that the output
91151 * to indicate that the output has been completely written. When
91274 * This field is used in Output records to indicate that the output
91276 * to indicate that the output has been completely written.
91370 * This field is used in Output records to indicate that the output
91372 * to indicate that the output has been completely written.
91450 * This field is used in Output records to indicate that the output
91452 * to indicate that the output has been completely written. When
91527 * This field is used in Output records to indicate that the output
91529 * to indicate that the output has been completely written. When
91598 * This field is used in Output records to indicate that the output
91600 * to indicate that the output has been completely written. When
91682 * This field is used in Output records to indicate that the output
91684 * to indicate that the output has been completely written.
91789 * This field is used in Output records to indicate that the output
91791 * to indicate that the output has been completely written.
91908 * This field is used in Output records to indicate that the output
91910 * to indicate that the output has been completely written.
91997 * This field is used in Output records to indicate that the output
91999 * to indicate that the output has been completely written.
92114 * This field is used in Output records to indicate that the output
92116 * to indicate that the output has been completely written.
92194 /* Indicate which of the two firmware images is active. */
92205 * This field is used in Output records to indicate that the output
92207 * to indicate that the output has been completely written.
92304 * This field is used in Output records to indicate that the output
92306 * to indicate that the output has been completely written. When
92408 * This field is a 32 bits bitmap for firmware to indicate which
92430 * This field is a 32 bits bitmap for firmware to indicate which
92456 * This field is used in Output records to indicate that the output
92458 * to indicate that the output has been completely written. When
92550 * This field is used in Output records to indicate that the output
92552 * to indicate that the output has been completely written. When
92697 * This field is used in Output records to indicate that the output
92699 * to indicate that the output has been completely written. When
92771 * This field is used in Output records to indicate that the output
92773 * to indicate that the output has been completely written. When
92833 * This field is used in Output records to indicate that the output
92835 * to indicate that the output has been completely written. When
92935 * This field is used in Output records to indicate that the output
92937 * to indicate that the output has been completely written. When
93036 * This field is used in Output records to indicate that the output
93038 * to indicate that the output has been completely written. When
93146 * This field is used in Output records to indicate that the output
93148 * to indicate that the output has been completely written. When
93233 * This field is used in Output records to indicate that the output
93235 * to indicate that the output has been completely written. When
93326 * This field is used in Output records to indicate that the output
93328 * to indicate that the output has been completely written. When
93419 * This field is used in Output records to indicate that the output
93421 * to indicate that the output has been completely written. When