Lines Matching full:termination

972 			 * on termination.
990 	 * Record our termination setting for the
1332  * and termination/cable detection contrls.
1451 	 * necessary for auto-termination control.  This assumption
1459 	 * if the termination logic is enabled.
1476 			printf("%s: Low byte termination %sabled\n",
1612 	 * termination settings 
1646 					printf("%s: Manual SE Termination\n",
1654 					printf("%s: Manual LVD Termination\n",
1708 		 * Now set the termination based on what
1726 			 * that having all of the termination on
1741 					printf("%s: 68 pin termination "
1744 					printf("%s: %sHigh byte termination "
1760 					printf("%s: 50 pin termination "
1763 					printf("%s: %sLow byte termination "
1773 				printf("%s: Primary Low Byte termination "
1779 		 * the termination per the tech note on the U160 cards.
1787 				       "termination Enabled\n",
1798 				printf("%s: %sLow byte termination Enabled\n",
1808 				printf("%s: %sHigh byte termination Enabled\n",
1816 		 * the termination per the tech note on the U160 cards.
1835 	 * BRDDAT6 = Enable Secondary High Byte termination
1836 	 * BRDDAT5 = Enable Secondary Low Byte termination
1837 	 * BRDDAT4 = Enable Primary high byte termination
1838 	 * BRDDAT3 = Enable Primary low byte termination