Lines Matching +full:- +full:qq

1 .\" SPDX-License-Identifier: CDDL-1.0
10 .\" or https://opensource.org/licenses/CDDL-1.0.
35 .\" Copyright (c) 2014-2015, The FreeBSD Foundation, All Rights Reserved.
39 .\" Copyright (c) 2019, Kjeld Schouten-Lebbing
48 .Nd native and user-defined properties of ZFS datasets
51 Properties are divided into two types, native properties and user-defined
57 In addition, native properties are either editable or read-only.
71 The values of numeric properties can be specified using human-readable suffixes
88 The values of non-numeric properties are case sensitive and must be lowercase,
95 The following native properties consist of read-only statistics about the
99 .Bl -tag -width "usedbyrefreservation"
110 For non-snapshots, the compression ratio achieved for the
136 For snapshots, this property is a comma-separated list of filesystems or volumes
167 .Nm zfs Cm load-key
169 .Nm zfs Cm unload-key
176 .Xr zfs-load-key 8
192 .Nm zfs Cm load-key
194 .Nm zfs Cm unload-key .
259 For filesystems or volumes which have saved partially-completed state from
403 .Bl -bullet -compact -offset 4n
406 .Pq Qq joe
409 .Pq Qq 789
412 .Pq Qq joe.smith@mydomain
415 .Pq Qq S-1-123-456-789
431 is set on a file system additional objects will be created per-file to store
475 Project is identified via the project identifier (ID) that is object-based
510 is set on a fileset, ZFS will create additional objects per-file to store
579 .Bl -tag -width ""
582 .Sy restricted Ns | Ns Sy passthrough Ns | Ns Sy passthrough-x
585 .Bl -tag -compact -offset 4n -width "passthrough-x"
600 .It Sy passthrough-x
624 .Bl -tag -compact -offset 4n -width "passthrough"
645 a non-trivial ACL whose entries can not be represented by a mode.
651 on a file or directory with a non-trivial ACL when
662 .Bl -tag -compact -offset 4n -width "posixacl"
673 indicates that NFSv4-style ZFS ACLs should be used.
778 This setting is used internally by a dump device residing on a RAID-Z pool and
793 .Xr zpool-features 7
796 Changing this property affects only newly-written data.
799 .Sy gzip- Ns Ar N Ns | Ns Sy lz4 Ns | Ns Sy lzjb Ns | Ns Sy zle Ns | Ns Sy zstd Ns | Ns
800 .Sy zstd- Ns Ar N Ns | Ns Sy zstd-fast Ns | Ns Sy zstd-fast- Ns Ar N
824 compression algorithm is a high-performance replacement for the
835 .Xr zpool-features 7
853 .Sy gzip- Ns Ar N ,
863 .Sy gzip-6
875 .Sy zstd- Ns Ar N ,
884 .Sy zstd-3 .
891 .Sy zstd-fast- Ns Ar N ,
895 .Bq Sy 1 Ns - Ns Sy 10 , 20 , 30 , No … , Sy 100 , 500 , 1000
902 .Sy zstd-fast
904 .Sy zstd-fast- Ns Ar 1 .
912 Changing this property affects only newly-written data.
918 When a zero-filled block is detected, it is stored as
923 Compression may result in a non-sector-aligned size, which will be rounded up
941 .Ar SELinux-User : Ns Ar SELinux-Role : Ns Ar SELinux-Type : Ns Ar Sensitivity-Level
950 .Ar SELinux-User : Ns Ar SELinux-Role : Ns Ar SELinux-Type : Ns Ar Sensitivity-Level
959 .Ar SELinux-User : Ns Ar SELinux-Role : Ns Ar SELinux-Type : Ns Ar Sensitivity-Level
967 .Ar SELinux-User : Ns Ar SELinux-Role : Ns Ar SELinux-Type : Ns Ar Sensitivity-Level
976 example, mirroring or RAID-Z.
983 Changing this property only affects newly-written data.
988 Remember that ZFS will not import a pool with a missing top-level vdev.
991 create, for example a two-disk striped pool and set
1037 ZFS will do a byte-to-byte comparison in case of two blocks having the same
1078 All direct requests must use a page-aligned memory buffer and the request
1113 may be applicable to SELinux-enabled systems, Lustre servers, and Samba
1131 .Sy encryption Ns = Ns Sy off Ns | Ns Sy on Ns | Ns Sy aes-128-ccm Ns | Ns
1132 .Sy aes-192-ccm Ns | Ns Sy aes-256-ccm Ns | Ns Sy aes-128-gcm Ns | Ns
1133 .Sy aes-192-gcm Ns | Ns Sy aes-256-gcm
1148 .Sy aes-256-gcm .
1155 .Xr zfs-load-key 8 .
1171 .Nm zfs Cm change-key .
1177 .Nm zfs Cm load-key
1188 .Nm zfs Cm change-key .
1193 .Nm zfs Cm load-key
1203 libcurl, or nothing, depending on compile-time configuration and run-time
1239 .Nm zfs Cm change-key .
1280 .Xr zpool-features 7
1331 .Pq Non-blocking mandatory locks .
1390 .Xr zpool-features 7
1423 .Bl -bullet -compact -offset 4n
1426 .Pq Qq joe
1429 .Pq Qq 789
1432 .Pq Qq joe.smith@mydomain
1435 .Pq Qq S-1-123-456-789
1441 user-specific quota is set.
1456 whom no userobj-specific quota is set.
1474 group-specific quota is set.
1489 whom no groupobj-specific quota is set.
1509 project-specific quota is set.
1524 whom no projectobj-specific quota is set.
1547 files in fixed-size records.
1569 .Xr zpool-features 7
1594 .Pq e.g. by mirroring or RAID-Z ,
1609 If a single on-disk block is corrupt, at worst a single block of user data
1626 of user data can be lost if a single on-disk block is corrupt.
1635 If a single on-disk block is corrupt, multiple user files or directories
1641 If a single on-disk block is corrupt, an entire dataset can be lost.
1790 .Xr passwd 5 Ns / Ns Xr shadow 5 Ns - ,
1791 LDAP- or
1792 .Xr smbpasswd 5 Ns -based )
1826 Please note that the options are comma-separated, unlike those found in
1853 property are re-shared with the new options, only if the property was previously
1903 is the POSIX-specified behavior of ensuring all synchronous requests
1919 The on-disk version of this file system, which is independent of the pool
2005 means that volumes exposition is controlled by system-wide tunable
2025 Two styles of extended attributes are supported: either directory-based
2026 or system-attribute-based.
2028 Directory-based extended attributes can be enabled by setting the value to
2041 System-attribute-based xattrs can be enabled by setting the value to
2051 of data may be stored per-file in the space reserved for system attributes.
2053 then it will be automatically written as a directory-based xattr.
2054 System-attribute-based extended attributes are not accessible
2064 The use of system-attribute-based xattrs is strongly encouraged for users of
2081 .Xr zfs-jail 8
2087 Controls whether the dataset is managed from a non-global zone or namespace.
2089 .Xr zfs-zone 8
2106 .Bl -tag -width ""
2112 should be case-sensitive, case-insensitive, or allow a combination of both
2120 and POSIX file systems have case-sensitive file names.
2127 case-sensitive and case-insensitive matching behavior.
2128 Currently, case-insensitive matching behavior on a file system that supports
2159 .Sy UTF-8
2177 properties are also new permissions that can be assigned to non-privileged users
2188 .Bl -tag -compact -offset Ds -width "rootcontext="
2217 In addition, these options can be set on a per-mount basis using the
2242 .Pq Qq Sy \&:
2246 .Pq Qq Sy \&: ,
2248 .Pq Qq Sy - ,
2250 .Pq Qq Sy \&. ,
2252 .Pq Qq Sy _ .
2258 .Pq Qq Sy - .
2264 independently-developed packages use the same property name for different