Lines Matching +full:total +full:- +full:timeout

7   Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
8   SPDX-License-Identifier: BSD-2-Clause-Patent
58 /// if combines these two bitmaps into a 32-bit bitmap.
93   @param  Is64BitCapable TRUE if controller supports 64-bit memory addressing,
230   @param  TimeOut             Indicates the maximum time, in milliseconds, which the transfer is
239   @retval EFI_TIMEOUT           The control transfer failed due to timeout.
255   IN     UINTN                              TimeOut,
278   @param  TimeOut             Indicates the maximum time, in milliseconds, which the transfer is
286   @retval EFI_TIMEOUT           The bulk transfer failed due to timeout.
303   IN     UINTN                              TimeOut,
373   @param  TimeOut               Indicates the maximum time, in milliseconds, which the transfer is
382   @retval EFI_TIMEOUT           The synchronous interrupt transfer failed due to timeout.
398   IN     UINTN                                       TimeOut,
412   the host and a device. Isochronous transfers can beused only by full-speed, high-speed, and
413   super-speed devices.
415   High-speed isochronous transfers can be performed using multiple data buffers. The number of
417   full-speed isochronous transfers this value is ignored.
419   Data represents a list of pointers to the data buffers. For full-speed isochronous transfers
420   only the data pointed by Data[0]shall be used. For high-speed isochronous transfers and for
422 …high-speed isochronous transfers the total number of buffers must not exceed EFI_USB_MAX_ISO_BUFFE…
424   For split transactions performed on full-speed device by high-speed host controller the total
428   is returned. If an error other than timeout occurs during the USB transfer, then EFI_DEVICE_ERROR
432     - Data is NULL.
433     - DataLength is 0.
434     - DeviceSpeed is not one of the supported values listed above.
435 … - MaximumPacketLength is invalid. MaximumPacketLength must be 1023 or less for full-speed devices,
436       and 1024 or less for high-speed and super-speed devices.
437     - TransferResult is NULL.
490   between the host and a device. Isochronous transfers can be used only by full-speed, high-speed,
491   and super-speed devices.
493   High-speed isochronous transfers can be performed using multiple data buffers. The number of
495   full-speed isochronous transfers this value is ignored.
497   Data represents a list of pointers to the data buffers. For full-speed isochronous transfers
498   only the data pointed by Data[0] shall be used. For high-speed isochronous transfers and for
500 …the high-speed isochronous transfers the total number of buffers must not exceed EFI_USB_MAX_ISO_B…
502   For split transactions performed on full-speed device by high-speed host controller the total
506     - Data is NULL.
507     - DataLength is 0.
508     - DeviceSpeed is not one of the supported values listed above.
509     - MaximumPacketLength is invalid. MaximumPacketLength must be 1023 or less for full-speed
510       devices and 1024 or less for high-speed and super-speed devices.