Lines Matching full:speed

91   @param  MaxSpeed       Host controller data transfer speed.
220   @param  DeviceSpeed         Indicates device speed.
269   @param  DeviceSpeed         Indicates device speed.
316   @param  DeviceSpeed         Indicates device speed.
365   @param  DeviceSpeed           Indicates device speed.
412   the host and a device. Isochronous transfers can beused only by full-speed, high-speed, and
413   super-speed devices.
415   High-speed isochronous transfers can be performed using multiple data buffers. The number of
417   full-speed isochronous transfers this value is ignored.
419   Data represents a list of pointers to the data buffers. For full-speed isochronous transfers
420   only the data pointed by Data[0]shall be used. For high-speed isochronous transfers and for
422 …high-speed isochronous transfers the total number of buffers must not exceed EFI_USB_MAX_ISO_BUFFE…
424   For split transactions performed on full-speed device by high-speed host controller the total
435 … - MaximumPacketLength is invalid. MaximumPacketLength must be 1023 or less for full-speed devices,
436       and 1024 or less for high-speed and super-speed devices.
443   @param  DeviceSpeed           Indicates device speed. The supported values are EFI_USB_SPEED_FULL,
490   between the host and a device. Isochronous transfers can be used only by full-speed, high-speed,
491   and super-speed devices.
493   High-speed isochronous transfers can be performed using multiple data buffers. The number of
495   full-speed isochronous transfers this value is ignored.
497   Data represents a list of pointers to the data buffers. For full-speed isochronous transfers
498   only the data pointed by Data[0] shall be used. For high-speed isochronous transfers and for
500 …the high-speed isochronous transfers the total number of buffers must not exceed EFI_USB_MAX_ISO_B…
502   For split transactions performed on full-speed device by high-speed host controller the total
509     - MaximumPacketLength is invalid. MaximumPacketLength must be 1023 or less for full-speed
510       devices and 1024 or less for high-speed and super-speed devices.
516   @param  DeviceSpeed           Indicates device speed. The supported values are EFI_USB_SPEED_FULL,