Lines Matching full:modes

97 /// and associated modes are not applicable to SATA devices.
151   /// This field specifies the PIO mode. PIO modes are defined in the ATA/ATAPI
159   /// This field specifies the single word DMA mode. Single word DMA modes are defined
169   /// This field specifies the multiword DMA mode. Various multiword DMA modes are
176   /// This field specifies the ultra DMA (UDMA) mode. UDMA modes are defined in the
182   /// The number of extended-mode bitmap entries. Extended modes describe transfer
359   Disqualifies specific modes for an IDE device.
362   drivers) to reject certain timing modes and request the IDE controller driver
363   to recalculate modes. This function allows the driver entity and the IDE
366   is when the IDE device fails to accept the timing modes that are calculated
369   If the driver entity does not want to limit the ATA timing modes and leave that
372   modes that are listed in EFI_ATA_COLLECTIVE_MODE.
374   The driver entity may disqualify modes for a device in any order and any number
377   This function can be called multiple times to invalidate multiple modes of the
378   same type (e.g., Programmed Input/Output [PIO] modes 3 and 4). See the ATA/ATAPI
379   specification for more information on PIO modes.
389   @param[in] BadModes   The modes that the device does not support and that
392   @retval EFI_SUCCESS             The modes were accepted without any errors.
408   Returns the information about the optimum modes for the specified IDE device.
410   This function is used by the driver entity to obtain the optimum ATA modes for
447   @param[out] SupportedModes   The optimum modes for the device.
453   @retval EFI_NOT_READY           Modes cannot be calculated due to a lack of
475   driver to program the IDE controller hardware to the specified modes. This
483   @param[in] Modes     The modes to set.
488   @retval EFI_NOT_READY           Modes cannot be set at this time due to lack of data.
489   @retval EFI_DEVICE_ERROR        Modes cannot be set due to hardware failure.
499   IN EFI_ATA_COLLECTIVE_MODE           *Modes
523   /// Submits information about modes that should be disqualified.  The specified
524   /// IDE device does not support these modes and these modes should not be
535   /// Programs the IDE controller hardware to the default timing or per the modes