Lines Matching +full:pci +full:- +full:phy
2 * P2020DS Device Tree Source stub (no addresses or top-level ranges)
4 * Copyright 2011-2012 Freescale Semiconductor Inc.
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "cfi-flash";
41 bank-width = <2>;
42 device-width = <1>;
46 read-only;
51 read-only;
56 read-only;
61 read-only;
70 read-only;
73 u-boot@7f80000 {
75 read-only;
80 #address-cells = <1>;
81 #size-cells = <1>;
82 compatible = "fsl,elbc-fcm-nand";
85 u-boot@0 {
87 read-only;
96 read-only;
105 read-only;
113 board-control@3,0 {
114 compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis";
119 compatible = "fsl,elbc-fcm-nand";
124 compatible = "fsl,elbc-fcm-nand";
129 compatible = "fsl,elbc-fcm-nand";
141 phy0: ethernet-phy@0 {
145 phy1: ethernet-phy@1 {
149 phy2: ethernet-phy@2 {
154 sgmii_phy1: sgmii-phy@1 {
158 sgmii_phy2: sgmii-phy@2 {
163 tbi0: tbi-phy@11 {
165 device_type = "tbi-phy";
171 tbi1: tbi-phy@11 {
173 device_type = "tbi-phy";
178 tbi2: tbi-phy@11 {
180 device_type = "tbi-phy";
186 fsl,tclk-period = <5>;
187 fsl,tmr-prsc = <200>;
188 fsl,tmr-add = <0xCCCCCCCD>;
189 fsl,tmr-fiper1 = <0x3B9AC9FB>;
190 fsl,tmr-fiper2 = <0x0001869B>;
191 fsl,max-adj = <249999999>;
195 tbi-handle = <&tbi0>;
196 phy-handle = <&phy0>;
197 phy-connection-type = "rgmii-id";
201 tbi-handle = <&tbi1>;
202 phy-handle = <&phy1>;
203 phy-connection-type = "rgmii-id";
208 tbi-handle = <&tbi2>;
209 phy-handle = <&phy2>;
210 phy-connection-type = "rgmii-id";
216 interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
217 interrupt-map = <
219 // IDSEL 0x11 func 0 - PCI slot 1
223 // IDSEL 0x11 func 1 - PCI slot 1
227 // IDSEL 0x11 func 2 - PCI slot 1
231 // IDSEL 0x11 func 3 - PCI slot 1
235 // IDSEL 0x11 func 4 - PCI slot 1
239 // IDSEL 0x11 func 5 - PCI slot 1
243 // IDSEL 0x11 func 6 - PCI slot 1
247 // IDSEL 0x11 func 7 - PCI slot 1
265 #size-cells = <2>;
266 #address-cells = <3>;
276 #interrupt-cells = <2>;
277 #size-cells = <1>;
278 #address-cells = <2>;
282 interrupt-parent = <&i8259>;
284 i8259: interrupt-controller@20 {
288 interrupt-controller;
289 device_type = "interrupt-controller";
290 #address-cells = <0>;
291 #interrupt-cells = <2>;
294 interrupt-parent = <&mpic>;
298 #size-cells = <0>;
299 #address-cells = <1>;
302 interrupt-parent =