Lines Matching +full:0 +full:x2200

39 	interrupts = <19 2 0 0>,
40 		     <16 2 0 0>;
43 /* controller at 0x9000 */
49 	bus-range = <0 255>;
51 	interrupts = <16 2 0 0>;
53 	pcie@0 {
54 		reg = <0 0 0 0 0>;
59 		interrupts = <16 2 0 0>;
60 		interrupt-map-mask = <0xf800 0 0 7>;
62 			/* IDSEL 0x0 */
63 			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
64 			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
65 			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
66 			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
71 /* controller at 0xa000 */
77 	bus-range = <0 255>;
79 	interrupts = <16 2 0 0>;
81 	pcie@0 {
82 		reg = <0 0 0 0 0>;
87 		interrupts = <16 2 0 0>;
88 		interrupt-map-mask = <0xf800 0 0 7>;
91 			/* IDSEL 0x0 */
92 			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
93 			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
94 			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
95 			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
105 	bus-frequency = <0>;		// Filled out by uboot.
107 	ecm-law@0 {
109 		reg = <0x0 0x1000>;
115 		reg = <0x1000 0x1000>;
116 		interrupts = <16 2 0 0>;
121 		reg = <0x2000 0x1000>;
122 		interrupts = <16 2 0 0>;
125 /include/ "pq3-i2c-0.dtsi"
127 /include/ "pq3-duart-0.dtsi"
129 /include/ "pq3-espi-0.dtsi"
134 /include/ "pq3-gpio-0.dtsi"
138 		reg = <0x20000 0x1000>;
140 		cache-size = <0x40000>; // L2,256K
141 		interrupts = <16 2 0 0>;
144 /include/ "pq3-dma-0.dtsi"
145 /include/ "pq3-usb2-dr-0.dtsi"
150 /include/ "pq3-esdhc-0.dtsi"
155 /include/ "pq3-sec3.3-0.dtsi"
160 /include/ "pq3-etsec2-0.dtsi"
174 		reg = <0xe0000 0x1000>;
190 		#address-cells = <0>;
192 		reg = <0x80 0x80>;
193 		interrupts = <63 2 0 0 60 2 0 0>; //high:47 low:44
198 		reg = <0x2000 0x200>;
205 		#size-cells = <0>;
206 		reg = <0x2120 0x18>;
212 		reg = <0x2400 0x200>;
219 		reg = <0x2600 0x200>;
226 		reg = <0x2200 0x200>;
235 		ranges = <0x0 0x10000 0x6000>;
237 		data-only@0 {
240 			reg = <0x0 0x6000>;
245 /include/ "pq3-etsec2-grp2-0.dtsi"