Lines Matching +full:uart0 +full:- +full:pins
1 // SPDX-License-Identifier: GPL-2.0-only
10 * AM6548-based (quad-core) IOT2050 SM variant, Product Generation 2
11 * 4 GB RAM, 16 GB eMMC, USB-serial converter on connector X30
14 * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html
17 /dts-v1/;
19 #include "k3-am6548-iot2050-advanced-common.dtsi"
20 #include "k3-am65-iot2050-common-pg2.dtsi"
23 compatible = "siemens,iot2050-advanced-sm", "ti,am654";
38 pinctrl-0 = <&leds_pins_default>, <&user1_led_pins>;
40 led-2 {
44 led-3 {
51 main_pcie_enable_pins_default: main-pcie-enable-default-pins {
52 pinctrl-single,pins = <
57 main_spi0_pins: main-spi0-default-pins {
58 pinctrl-single,pins = <
68 asic_spi_mux_ctrl_pin: asic-spi-mux-ctrl-default-pins {
69 pinctrl-single,pins = <
76 user1_led_pins: user1-led-default-pins {
77 pinctrl-single,pins = <
85 soc_asic_pins: soc-asic-default-pins {
86 pinctrl-single,pins = <
95 gpio-line-names = "main_gpio0-base";
99 pinctrl-names = "default";
100 pinctrl-0 =
104 gpio-line-names =
110 "", "", "", "", "CP2102N-RESET", "", "", "", "", "",
122 "", "", "", "", "", "", "ASIC-spi-mux-ctrl";
126 pinctrl-names = "default";
127 pinctrl-0 =
131 gpio-line-names =
133 "wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0",
134 "UART0-enable", "UART0-terminate", "", "WIFI-disable",
138 "", "", "", "", "", "USER-button", "", "", "","ASIC-gpio-0",
140 "ASIC-gpio-1", "ASIC-gpio-2";
144 pinctrl-names = "default";
145 pinctrl-0 = <&main_spi0_pins>;
147 #address-cells = <1>;
148 #size-cells= <0>;
152 pinctrl-names = "default";
153 pinctrl-0 = <&mcu_spi0_pins_default>;
168 assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
169 assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
177 pinctrl-names = "default";
178 pinctrl-0 = <&minipcie_pins_default>;
180 num-lanes = <1>;
182 phy-names = "pcie-phy0";
183 reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>;