Lines Matching +full:2 +full:- +full:compatible
6 * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
9 #include <dt-bindings/clock/sprd,sc9860-clk.h>
12 interrupt-parent = <&gic>;
13 #address-cells = <2>;
14 #size-cells = <2>;
17 compatible = "simple-bus";
18 #address-cells = <2>;
19 #size-cells = <2>;
23 compatible = "syscon";
28 compatible = "syscon";
33 compatible = "syscon";
38 compatible = "syscon";
43 compatible = "syscon";
48 compatible = "syscon";
53 compatible = "syscon";
58 compatible = "syscon";
63 compatible = "syscon";
67 ap-apb {
68 compatible = "simple-bus";
69 #address-cells = <1>;
70 #size-cells = <1>;
74 compatible = "sprd,sc9860-uart",
75 "sprd,sc9836-uart";
77 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
78 clock-names = "enable", "uart", "source";
85 compatible = "sprd,sc9860-uart",
86 "sprd,sc9836-uart";
89 clock-names = "enable", "uart", "source";
96 compatible = "sprd,sc9860-uart",
97 "sprd,sc9836-uart";
100 clock-names = "enable", "uart", "source";
107 compatible = "sprd,sc9860-uart",
108 "sprd,sc9836-uart";
111 clock-names = "enable", "uart", "source";
118 ap-ahb {
119 compatible = "simple-bus";
120 #address-cells = <2>;
121 #size-cells = <2>;
124 ap_dma: dma-controller@20100000 {
125 compatible = "sprd,sc9860-dma";
128 #dma-cells = <1>;
130 #dma-channels = <32>;
131 dma-channels = <32>;
132 clock-names = "enable";
137 compatible = "sprd,sdhci-r11";
141 clock-names = "sdio", "enable", "2x_enable";
145 assigned-clocks = <&aon_prediv CLK_EMMC_2X>;
146 assigned-clock-parents = <&clk_l0_409m6>;
148 sprd,phy-delay-mmc-hs400 = <0x44 0x7f 0x2e 0x2e>;
149 sprd,phy-delay-mmc-hs200 = <0x0 0x8c 0x8c 0x8c>;
150 sprd,phy-delay-mmc-ddr52 = <0x3f 0x75 0x14 0x14>;
151 sprd,phy-delay-mmc-hs400es = <0x3f 0x3f 0x2e 0x2e>;
152 vmmc-supply = <&vddemmccore>;
153 bus-width = <8>;
154 non-removable;
155 no-sdio;
156 no-sd;
157 cap-mmc-hw-reset;
158 mmc-hs400-enhanced-strobe;
159 mmc-hs400-1_8v;
160 mmc-hs200-1_8v;
161 mmc-ddr-1_8v;
166 compatible = "simple-bus";
167 #address-cells = <2>;
168 #size-cells = <2>;
172 compatible = "sprd,sc9860-adi";
175 hwlock-names = "adi";
176 #address-cells = <1>;
177 #size-cells = <0>;
181 compatible = "sprd,sc9860-timer";
188 compatible = "sprd,sc9860-suspend-timer";
194 compatible = "sprd,hwspinlock-r3p0";
196 #hwlock-cells = <1>;
197 clock-names = "enable";
202 compatible = "sprd,sc9860-eic-debounce";
204 gpio-controller;
205 #gpio-cells = <2>;
206 interrupt-controller;
207 #interrupt-cells = <2>;
212 compatible = "sprd,sc9860-eic-latch";
214 gpio-controller;
215 #gpio-cells = <2>;
216 interrupt-controller;
217 #interrupt-cells = <2>;
222 compatible = "sprd,sc9860-eic-async";
224 gpio-controller;
225 #gpio-cells = <2>;
226 interrupt-controller;
227 #interrupt-cells = <2>;
232 compatible = "sprd,sc9860-eic-sync";
234 gpio-controller;
235 #gpio-cells = <2>;
236 interrupt-controller;
237 #interrupt-cells = <2>;
242 compatible = "sprd,sc9860-gpio";
244 gpio-controller;
245 #gpio-cells = <2>;
246 interrupt-controller;
247 #interrupt-cells = <2>;
252 compatible = "sprd,sc9860-pinctrl";
257 compatible = "sprd,sp9860-wdt";
260 timeout-sec = <12>;
261 clock-names = "enable", "rtc_enable";
268 compatible = "simple-bus";
269 #address-cells = <2>;
270 #size-cells = <2>;
273 agcp_dma: dma-controller@41580000 {
274 compatible = "sprd,sc9860-dma";
276 #dma-cells = <1>;
278 #dma-channels = <32>;
279 dma-channels = <32>;
280 clock-names = "enable", "ashb_eb";
288 compatible = "fixed-clock";
289 #clock-cells = <0>;
290 clock-frequency = <32768>;
291 clock-output-names = "ext-32k";
295 compatible = "fixed-clock";
296 #clock-cells = <0>;
297 clock-frequency = <26000000>;
298 clock-output-names = "ext-26m";
302 compatible = "fixed-clock";
303 #clock-cells = <0>;
304 clock-frequency = <100000000>;
305 clock-output-names = "ext-rco-100m";
309 compatible = "fixed-clock";
310 #clock-cells = <0>;
311 clock-frequency = <409600000>;
312 clock-output-names = "ext-409m6";